Mustang SN95 Fuel Hat
Finally 3 pumps for the legendary SN95 mustang with the Mustang SN95 Fuel Hat. This platform has created a massive following with amazing aftermarket support – there are virtually no limits to what has been done to any of the powertrains available for this chassis. With any need to make power – a steady supply of fuel is needed. Enter the TopHat™ fuel solution designed and manufactured by Custom Performance Engineering, Inc.
The TopHat™ Mustang SN95 Fuel Hat is the ultimate solution for all fueling needs, designed to take up to three Walbro GSS342, F90000262,F90000267, F90000274, F90000285, AEM 340lph or Aeromotive 11542 340lph pumps. The design was also intended to be plug and play, easy to install and reliable with many features to make the transition easier and have you on your way to meeting your power goals.
The TopHat™, engineered and manufactured by Custom Performance Engineering, Inc., is the ultimate in upgrades for the fueling system. Accommodating those wanting to run two pumps for a bump in power, to those targeting 1200hp with ethanol – this setup is the all in one solution.
Fits up to 3 fuel pumps. Typically we see customers use the Walbro GSS342, F90000262,F90000267, F90000274, F90000285, AEM 340lph or Aeromotive 11542 340lph pumps
Mustang SN95 Fuel Hat FEATURES
CAD/CAM/CMM Engineered and manufactured
6061 CNC Billet Aluminum
e85 Ethanol Ready
Up to 3 x 465Lph or 3 x 255Lph pumps, mounted vertically
Integrated merge from all pumps – NO need for additional y-block, plumbing
Uses OEM siphon
-10 AN Feed
-8 AN Return
Low profile fitment
Integrated attachment for OEM fuel level sender
Hermetically sealed wires with o-ring
Hardware, filters, fuel lines, clamps and etc. included to accommodate various configurations
Made in the U.S.A.
Supports Up to 3 PumpsThe design of the fuel system supports up to three Walbro GSS342, F90000262,F90000267, F90000274, F90000285, AEM 340lph or Aeromotive 11542 340lph pumps. The pumps are secured with O-rings for optimal height and to isolate vibrations from the aluminum body of the system.
To cut the cost of upgrading, simplify the amount of parts and eliminate additional plumbing to reduce leaks we have integrated the merge for the three fuel pumps in the hat itself. Ease of installation is always a big concern for our customers and cp-e™ is striving to deliver in this department.
OEM Fit and Finish
Reverse engineering using a CMM arm, modeling OE components and with precision CNCmanufacturing we are able to make the TopHat™ as plug and play as possible. Necessary features have been CNC milled to mimic OEM design to accommodate the factory level sender(03-04 Cobra and 99-04 GT), placing it in the exactly the same position as OEM.
The wiring harness is isolated and sealed from the fuel tank with a proprietary Delrin wire seal.Delrin has one of the highest resistances to fuels, including ethanol, of any plastic, so it was chosen to provide a lifetime of trouble free operation.