{"title":"Watson Racing","description":"\u003ch1\u003ewatson-racing\u003c\/h1\u003e","products":[{"product_id":"watson-racing-2015-mustang-4-point-drag-race-roll-bar","title":"Watson Racing 2015-2020 Mustang Bolt-In 4 Point Roll Cage - Gray","description":"\u003cp\u003e\u003cbr\u003e\nQuite simply the finest 4-point Mustang bar on the market! Borrowing from our exceedingly popular S197 4-point roll bar, we brought the same design principals into the new S550 2015 roll bar.\u003cbr\u003e\n\u003cbr\u003e\nWhat makes this 4-Point different?\u003cbr\u003e\n\u003cbr\u003e\n• Quick-In and Quick-Out design. Perfect for those of you who are part-time racers and don’t want a full-time roll bar. Uniquely-engineered bolt-in mounting system stays hidden and mounted in the car. Unbolt the Watson Roll Bar from INSIDE your car for quick removal and re-installation.\u003cbr\u003e\n\u003cbr\u003e\n• BOLTS-IN to the FACTORY corner gussets. Other 4-point bars either bolt to the weak sheet metal floor behind the front seats (dangerous!), or ask you to drill into the high-strength steel… which is nearly impossible, because high strength steel is MUCH harder than “normal” steel! The Watson Racing 4-Point bar bolts in using EXISTING BOLT HOLES surrounding the factory high-strength steel corner gussets for maximum safety and ease of installation.\u003cbr\u003e\n\u003cbr\u003e\n• Extra strength- not only do we bolt to the front corner gussets, but the rear diagonal bars bolt through the floor directly above a factory crossmember- one of the strongest areas at the back of the car!\u003cbr\u003e\n\u003cbr\u003e\n• Minimal trim panel modification. With our 4-Point Bar’s quick-in, quick-out design, you don’t have to cut your trim panels AT ALL if you don’t want to. If you’d rather keep the trim panels and Roll Bar permanently mounted in the car, the modifications required to the trim panels are VERY minimal. No cutting your time panels in half with our bar!\u003cbr\u003e\n\u003cbr\u003e\n• Minimal-bend design. Bends in tubes reduce a bar’s effectiveness and safety. We kept the number of bends to a minimum in order to maximize safety. Where bends are required, we use a CNC precision mandrel bending process to maintain strength.\u003cbr\u003e\n\u003cbr\u003e\n• We sweat the details: 100% TIG-welded 1.75”x.120”-wall DOM tubing. 100% powder coated. Shoulder harness retention loops, standard. Welded\/fixed harness bar and diagonal bar, standard. Precision-machined tube joints for high strength on rear support tubes- no through-bolting here, and notice the plug-welds! Zinc-plated heavy M10 metric fasteners included.\u003cbr\u003e\n\u003cbr\u003e\n• Full seat travel. Since the Watson Roll Bar mounts on top of the factory corner gussets (next to rear seat bottom cushion), the front seats are free to slide all the way back and maintain a comfortable driving position.\u003cbr\u003e\u003c\/p\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141341327618,"sku":"WAT-WR-15-BOLTINCAGE","price":1355.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-15-boltincage-4t.jpg?v=1784983582"},{"product_id":"watson-racing-2015-2017-mustang-lightweight-drag-race-front-bumper-support","title":"Watson Racing 2015-2017 Mustang Lightweight Drag Race Front Bumper Support","description":"\u003cp\u003eAnother Watson Racing exclusive! Light-weight tubular front bumper for the 2015+ S550\u003c\/p\u003e\u003cp\u003eMustang. Similar to the bumper that is standard issue on 2013-2014 Cobra Jet Mustang.\u003c\/p\u003e\u003cp\u003eLightweight tubular construction offers 6-pound weight savings over stock 12-pound bumper beam! Powder coated finish. \u003c\/p\u003e\u003cp\u003eOff road use only.\u003c\/p\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141341524226,"sku":"WAT-WR-DRFRTBUMPER15","price":241.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-drfrtbumper15-2t.jpg?v=1784983584"},{"product_id":"watson-racing-2005-2017-mustang-fire-suppression-bottle-bracket","title":"Watson Racing 2005-2017 Mustang Fire Suppression Bottle Bracket","description":"Mustang Fire Suppression Bottle Bracket - \u003cbr\u003eService replacement for the Boss-S Mustang race cars, and easily adaptable to almost any car or fire suppression system needs.\u003cbr\u003eIntended for a 4-liter bottle, but flexible enough to be used with others.\u003cbr\u003ePrecision laser-cut aluminum and powder coated for long life, includes anti-vibration insulator strips.","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141378158850,"sku":"WAT-WR-FIREBRKT","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-firebrkt-2t.jpg?v=1784983784"},{"product_id":"watson-racing-2015-2017-mustang-drag-race-center-stack-panel","title":"Watson Racing 2015-2017 Mustang Drag Race Center Stack Panel","description":"\u003cp\u003eThis Watson Racing Center Stack Panel is similar to our other plain panel (WR-15-CTRSTKPLAIN), but is designed to work exclusively with our Low Profile Drag Race Center Console (WR-15-DRCONSOLE). This panel is similar to the panel used in our factory built drag cars, but without the switch or gauge holes. This allows you to customize the panel to suit your needs! Made of heavy-gauge aluminum and powder coated medium-gloss black for years of service.\u003c\/p\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141378191618,"sku":"WAT-WR-15-DRCTRSTACK-NH","price":129.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-15-drctrstack-nh-2t.jpg?v=1784983784"},{"product_id":"watson-racing-2005-2017-mustang-catch-can-breather-kit","title":"Watson Racing 2005-2017 Mustang Catch Can \/ Breather Kit","description":"**WATSON RACING EXCLUSIVE** Watson Racing\/Peterson Catch Can . -10 MALE AN FITTINGS. All lines and fittings are provided, and better yet- the rubber line is now produced UN-CUT and without the unnecessary sheathing. This gives you the flexibility to mount the Peterson Can in any location as well as flexibility in the vehicle you choose to use this on: 2005 all the way through S550 Mustang, for road racing OR drag racing! Standard equipment on Ford factory built drag and road race cars.\u003cbr\u003e\u003cbr\u003eThe Mustang engine bay is already very cramped- but relocating the heavy battery to the trunk (as most racers do) frees up the perfect location for Watson’s Breather Can. Check out Watson Racing’s 100-percent bolt-in battery relocation kit","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141378224386,"sku":"WAT-WR-PCVCANKIT","price":557.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-pcvcankit-2t.jpg?v=1784983783"},{"product_id":"watson-racing-2015-2017-s550-mustang-jack-point-plates","title":"Watson Racing 2015-2017 S550 Mustang Jack Point Plates","description":"A jacking rail is nice, but a single point is easier to install, lighter, and will lift more consistently. These are supplied raw unfinished and have to be welded in. The main donut on the bottom of the jack point is strong .25-inch -thick steel, and the side load plates are 1\/8-inch steel plate. TIG welded. \u003cbr\u003e\u003cbr\u003eThis kit includes a pair (left and right) of Watson Racing Jack Point Plates for the S550 Mustang.","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141378257154,"sku":"WAT-WR-15-JACKPLATE","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-15-jackplate-2t.jpg?v=1784983783"},{"product_id":"watson-racing-2015-2017-s550-mustang-race-car-seat-mount","title":"Watson Racing 2015-2017 S550 Mustang Race Car Seat Mount","description":"New and improved for the Mustang S550! Watson Racing weld-in seat brackets are a must-have for any serious Mustang S550 race car build. Where safety cannot be compromised. Installation is now even more flexible than before by utilizing two separate rails. \u003cbr\u003e\u003cbr\u003eSimply bolt these brackets to your seat and position the seat in the car, then weld in place. By providing two separate rails, we can accommodate any width race seat on the market! Made of seriously heavy-duty 4-mm thick steel with weld-nuts in place, ready for your seat side mounts or sliders. Use these on either the driver side OR passenger side!","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141378289922,"sku":"WAT-WR-15-SEATBRKT","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-15-mustseatmount-7t.jpg?v=1784983784"},{"product_id":"watson-racing-2015-2017-s550-mustang-driveshaft-safety-loop","title":"Watson Racing 2015-2017 S550 Mustang Driveshaft Safety Loop","description":"Service replacement part for the original equipment on our factory-built Drag Race and Road Race Cars! Fits all 2015+ S550 Mustangs, including EcoBoost and V6. We use these on both drag race and road race S550 Mustangs. Fabricated from ¼-inch thick steel plate and zinc plated for long life. Powder coated parts are nice, but parts that see frequent removal will chip over time. Zinc plating is superior and will last a lifetime! \u003cbr\u003e\u003cbr\u003eIncludes all necessary hardware and instructions; some drilling required.","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141378388226,"sku":"WAT-WR-15-DRIVESHAFTLOOP","price":156.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-15-driveshaftloop-2t.jpg?v=1784983784"},{"product_id":"watson-racing-2015-2017-s550-mustang-parachute-mount-rear-bumper","title":"Watson Racing 2015-2017 S550 Mustang Parachute Mount Rear Bumper","description":"Mustang Parachute Bumper is developed for the 2015 - 2017 S550 Mustangs! Get ready to see the new Watson Racing S550 Parachute Bumper in action as the Watson Racing '16 Cobra Jet makes it way to the track in 2017. \u003cbr\u003e\u003cbr\u003eConstructed of 1-5\/8-inch Chromoly tubing for high strength and light weight, and powder coated for durability. \u003cbr\u003e\u003cbr\u003eSome drilling IS required: the Watson S550 (2015+) chute bumper bolts on in place of the factory bumper beam using the 2 OEM bolts per side, which IS NOT strong enough to sustain repeated abuse from parachute deployment. We add 4 additional bolts per side that connect the bumper directly to the frame rails under the car – that’s 12 bolts holding this to the car! \u003cbr\u003e\u003cbr\u003eUse with Watson Racing’s S550 MUSTANG parachute mount bracket, p\/n WR-PARACHUTEMNT.","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141378420994,"sku":"WAT-WR-15-DRREARBUMPER-P","price":349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-15-drrearbumper-p-2t.jpg?v=1784983787"},{"product_id":"watson-racing-2011-2017-mustang-solid-engine-mounts","title":"Watson Racing 2011-2017 Mustang Solid Engine Mounts","description":"Another Watson Racing exclusive! Used on our world-record holding Super Stock Mustang drag car and others! Watson is proud to bring you our exclusive ONE-PIECE solid engine mounts for the coyote engine in an S197 Mustang platform. Current aftermarket bullet or urethane motor mounts only replace the lower hydraulic bushing. Why not replace the clunky aluminum factory block-side mount as well? \u003cbr\u003e\u003cbr\u003eWatson has solved the problem for you. The factory hydraulic mount and aluminum block-side mount weigh in at 12 lbs combined. The one-piece Watson Racing motor mounts, replacing BOTH the lower hydraulic mount AND the huge aluminum block-side mount, save you THREE POUNDS!\u003cbr\u003e\u003cbr\u003eAs you know in racing, every ounce counts. Besides the weight savings, there are also the added benefits of their awesome looks and added clearance for tubular headers. \u003cbr\u003e\u003cbr\u003eWe put a lot of thought into the design and construction of these motor mounts. Most fabricated parts on the market are simply powder coated. Powder looks and works great, but it can also chip off over time and allow the part to rust. We took it a step further and silver zinc-plated these for a lifetime of protection. Racers who pull their engines repeatedly will appreciate the long-lasting protection of zinc plating. Further, these laser-cut brackets feature slot and tab construction, where each piece fits into its adjoining piece with a precise tab and slot, then TIG welded together. The Watson Racing Mustang engine mounts are made of incredibly strong high-strength steel and retain the Coyote stock engine height, meeting all class regulations.","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141378453762,"sku":"WAT-WR-COYOTESLDMNT","price":397.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-coyotesldmnt-2s.jpg?v=1784983783"},{"product_id":"watson-racing-2015-2017-s550-mustang-intercooler-ice-tank","title":"Watson Racing 2015-2021 S550 Mustang Intercooler Ice Tank","description":"Watson Racing is proud to release its new 2015+ Mustang S550 Aluminum Intercooler Ice Tank! This reservoir bolts into your Mustang S550 using existing bolt holes in place of the stock battery, and can handle a MASSIVE 3.25 gallons of fluid and\/or ice. The sealed clear lid twists off with a few turns, revealing a HUGE 7-inch diameter hole, making it easy to add ice while you’re in the pits. Features 1\/2-inch NPT fittings (inlet, outlet, drain), making it super flexible to add nearly any –AN or pipe fittings you need to suit your application. Lightweight aluminum, powder coated for lifelong good looks.\u003cbr\u003e\u003cbr\u003eBattery Relocation Required","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141378486530,"sku":"WAT-WR-15-INTRCOOLERTANK","price":1098.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-15-intercoolertank-2t.jpg?v=1784983788"},{"product_id":"watson-racing-2015-2017-s550-mustang-th400-transmission-mount","title":"Watson Racing 2015-2022 S550 Mustang TH400 Transmission Mount","description":"\u003cp\u003eWatson Racing's Mustang S550 TH400 Transmission Mount and Crossmember! When it comes time to step up to the Turbo 400 for high-power applications, we make the installation easy with our rigid one-piece transmission mount. The Watson crossmember is constructed of heavy duty 1\/4-inch (6-mm) thick steel and zinc plated for long life – far better protection than powder coating which may chip off over time. Kit includes a TH400 rubber isolator\/mount, and bolts in place of the stock transmission crossmember using your OEM bolts.\u003c\/p\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141378519298,"sku":"WAT-WR-15-TRANSMOUNT","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-15-transmount-2t.jpg?v=1784983785"},{"product_id":"watson-racing-2005-2017-coyote-cam-actuator-delete-plugs","title":"Watson Racing 2005-2017 Coyote Cam Actuator Delete Plugs","description":"These plugs are needed when running aftermarket ECU and stand-alone electronics (FAST, AEM, Holley, Haltech, Big Stuff) and deleting VCT (Variable Cam Timing). \u003cbr\u003e\u003cbr\u003eSimple press in fit. Available in our smoke grey anodized finish. Set of 4.","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141378552066,"sku":"WAT-WR-CAMACTUATORP","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-camactuatorplug-2t.jpg?v=1784983786"},{"product_id":"watson-racing-mechanical-throttle-pedal-2005-2023-mustang","title":"Watson Racing Mechanical Throttle Pedal (2005-2023 Mustang)","description":"These plugs are needed when running aftermarket ECU and stand-alone electronics (FAST, AEM, Holley, Haltech, Big Stuff) and deleting VCT (Variable Cam Timing). \u003cbr\u003e\u003cbr\u003eSimple press in fit. Available in our smoke grey anodized finish. Set of 4.","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141378584834,"sku":"WAT-WR-MECHTHROTTLEPDL","price":362.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-mechthrottlepdl-2t.jpg?v=1784983784"},{"product_id":"watson-racing-2010-2017-coyote-block-saver-kit","title":"Watson Racing 2010-2017 Coyote Block Saver Kit","description":"These plugs are needed when running aftermarket ECU and stand-alone electronics (FAST, AEM, Holley, Haltech, Big Stuff) and deleting VCT (Variable Cam Timing). \u003cbr\u003e\u003cbr\u003eSimple press in fit. Available in our smoke grey anodized finish. Set of 4.","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141378617602,"sku":"WAT-WR-COYOTEBLKSAVER","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-coyoteblksaver-2t.jpg?v=1784983784"},{"product_id":"watson-racing-2005-2017-s197-s550-coyote-solid-engine-mount-1-inch-drop","title":"Watson Racing 2005-2017 S197 \/ S550 Coyote Solid Engine Mount - 1 Inch Drop","description":"Another Watson Racing exclusive! Similar to the solid engine mounts found on the original equipment on our factory-built Drag Race and Road Race Cars. Watson is proud to bring you our exclusive ONE-PIECE solid engine mounts for the Coyote engine in a 1-inch drop version for S550 and S197 Mustang platforms. Current aftermarket billet or urethane motor mounts only replace the lower hydraulic bushing. Why not replace the clunky aluminum factory block-side mount as well?\u003cbr\u003e\u003cbr\u003eWatson has solved the problem for you. The factory hydraulic mount and aluminum block-side mount weigh in at 12 lbs combined. The one-piece Watson Racing motor mounts, replacing BOTH the lower hydraulic mount AND the huge aluminum block-side mount, save you THREE POUNDS! \u003cbr\u003e\u003cbr\u003eAs you know in racing, every ounce counts. Besides the weight savings, there are also the added benefits of their awesome looks and added clearance for tubular headers. \u003cbr\u003e\u003cbr\u003eWe put a lot of thought into the design and construction of these motor mounts. Most fabricated parts on the market are simply powder coated. Powder looks and works great, but it can also chip off over time and allow the part to rust. We took it a step further and silver zinc-plated these for a lifetime of protection. Racers who pull their engines repeatedly will appreciate the long-lasting protection of zinc plating. Further, these laser-cut brackets feature slot and tab construction, where each piece fits into its adjoining piece with a precise tab and slot, then TIG welded together. The Watson Racing Mustang engine mounts are made of incredibly strong high-strength steel and retain the Coyote stock engine height, meeting all class regulations.","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141378650370,"sku":"WAT-WR-COYOTESLDMNT-CJ","price":397.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-coyotesldmnt-cj-2t.jpg?v=1784983784"},{"product_id":"watson-racing-2015-2017-s550-mustang-center-stack-panel-plain","title":"Watson Racing 2015-2023 S550 Mustang Center Stack Panel - Plain","description":"By popular demand, we’re now offering a powder-coated center stack panel with no switch holes, for your S550 Mustang. Similar to original equipment on our factory built Drag Race and Road Race Cars. The center stack panels are made of heavy-gauge aluminum and roll-formed to the contours of the dash, for a perfect fit. Add your own switches, gauges, or whatever you want to meet the specific needs of your Mustang S550 race car. No logos for a clean and clutter-free look.\u003cbr\u003e\u003cbr\u003eDrag Race \u0026amp; Road Race, S550 Mustang","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141378715906,"sku":"WAT-WR-15-CTRSTKPLAIN","price":76.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-15-ctrstkplain-2t.jpg?v=1784983787"},{"product_id":"watson-racing-2005-2017-mustang-road-race-window-net-rods","title":"Watson Racing 2005-2017 Mustang Road Race Window Net Rods","description":"2005-17 Mustang Road Race Window Net Rod Kit\u003cbr\u003e\u003cbr\u003eSame design as used in the factory Ford Race car programs. Durable Powder coated black finish.\u003cbr\u003e\u003cbr\u003eWorks with both WR Road Race Cages\u003cbr\u003eWR-15-ROADRACECAGE\u003cbr\u003eWR-ROADRACECAGE","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141378683138,"sku":"WAT-WR-RRWDONETRODS","price":196.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-15-rrwdonetrods-3t.jpg?v=1784983786"},{"product_id":"watson-racing-2015-2017-s550-mustang-coyote-alternator-relocation-kit","title":"Watson Racing 2015-2017 S550 Mustang Coyote Alternator Relocation Kit","description":"This is a service replacement part for the Coyote-powered drag cars, and created for those specifically using an ATI Super Damper in supercharged (10-rib) applications. Can be used in S550 MUSTANG. In some 10-rib supercharger belt systems, the 10-rib belt is wrapped around the alternator as well. In hard-launch situations, the tension and strain on the 10-rib system can cause the alternator and its bracket to flex, ejecting the 10-rib belt. \u003cbr\u003e\u003cbr\u003eThe Watson Alternator Relocation Kit includes a massive machined aluminum bracket that moves the alternator rear-ward, and allows it to be driven off of a secondary crank pulley (available from ATI). The kit includes the bracket, hardware, idler\/tensioner pullies, and the 6-rib belt; the secondary crank pulley is available directly through ATI. \u003cbr\u003e\u003cbr\u003eNotes: For off-road race-use only; was NOT designed to be compatible with factory air conditioning, though it may work with modification. Alternator’s new position is close to the k-member and frame rail; some clearance of the k-member may be required, and solid engine mounts highly recommended.","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141378748674,"sku":"WAT-WR-ALTRELOBRKT","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-altrelobrkt-3t_1.jpg?v=1784983788"},{"product_id":"watson-racing-2015-2017-s550-mustang-fresh-air-intake-2016-cobra-jet","title":"Watson Racing 2015-2017 S550 Mustang Fresh Air Intake 2016 Cobra Jet","description":"Fresh air inlet for 2016 Cobra Jet with front inlet Whipple 2.9L supercharger. Legal for use in NMCA Factory Supercar class. Aluminum powder coated construction. \u003cstrong\u003eRequires modification to hood and radiator cover.\u003c\/strong\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141378781442,"sku":"WAT-WR-18-INLET","price":1655.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-9603-cjn-2t.jpg?v=1784983784"},{"product_id":"watson-racing-2005-2017-s197-s550-mustang-coyote-coil-brackets","title":"Watson Racing 2005-2017 S197 \/ S550 Mustang Coyote Coil Brackets","description":"Watson Racing Exclusive! S197 and S550 Fitment \u003cbr\u003e\u003cbr\u003eFor use with stand-alone electronics systems that utilize the Mercury Marine style coil. \u003cbr\u003e\u003cbr\u003eAluminum construction. \u003cbr\u003eBrushed anodized finish.\u003cbr\u003e Mounting hardware included.\u003cbr\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141378814210,"sku":"WAT-WR-COILBRKTS","price":132.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-parachutemnt-low-3t.jpg?v=1784983786"},{"product_id":"watson-racing-catch-can-breather-kit-sealed-top-2005-2022-mustang-wr-pcvcankit-sealed","title":"Watson Racing Catch Can \/ Breather Kit - Sealed Top (2005-2022 Mustang) - WR-PCVCANKIT-SEALED","description":"\u003ctable border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style=\"width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv id=\"ProductDetail_ProductDetails_div\"\u003e\n\u003cstrong\u003e\u003cem\u003eNEW! POWDER COATED BLACK FINISH!\u003c\/em\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eMUSTANG CATCH CAN\/BREATHER KIT -\u003c\/strong\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003e**WATSON RACING EXCLUSIVE**\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eWatson Racing\/Peterson Catch Can. -10 MALE AN FITTINGS. All lines and fittings are provided, and better yet- the rubber line is now produced UN-CUT and without the unnecessary sheathing. This gives you the flexibility to mount the Peterson Can in any location as well as flexibility in the vehicle you choose to use this on: 2005 all the way through S550 Mustang, for road racing OR drag racing! Standard equipment on Ford factory built drag and road race cars.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis part differs from our original catch can WR-PCVCANKIT\u003c\/strong\u003e\u003cstrong\u003e. The sealed top and 3rd vented port \u003c\/strong\u003e(not shown in the attached photo) \u003cstrong\u003eallows you to expel the potential fumes under the car away from the cowl. This item is more suitable for street cars. The manufacturing process is also a bit costlier over the unsealed can.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eThe Mustang engine bay is already very cramped- but relocating the heavy battery to the trunk (as most racers do) frees up the perfect location for Watson’s Breather Can. Check out Watson Racing’s 100-percent bolt-in battery relocation kit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141378846978,"sku":"WAT-WR-PCVCANKIT-SEALED","price":663.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-pcvcankit-sealed-2.jpg?v=1784983787"},{"product_id":"watson-racing-2013-2014-mustang-drag-race-brake-line-kit","title":"Watson Racing 2013-2014 Mustang Drag Race Brake Line Kit","description":"Drag Race Front Brake Line Kit Stainless steel construction. \u003cbr\u003e\u003cbr\u003eSimilar to the original system found on our factory built Mustang race cars.","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141378879746,"sku":"WAT-WR-DRBRKLNS","price":175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-drbrklns-3t.jpg?v=1784983786"},{"product_id":"watson-racing-2005-2014-mustang-k-member-tie-down-tow-rings","title":"Watson Racing 2005-2014 Mustang K-Member Tie Down \/ Tow Rings","description":"\u003cp\u003eAs used on our factory built drag race cars! Laser-cut from quarter-inch thick steel plate, the Watson Racing Mustang K-Member Tie Down\/Tow Ring kit is welded to your factory K-member providing ultra-strong tie down points as well as a central tow ring for pulling your car through the pits, or winching it into your trailer. No need for big bulky tow rings poking through your front bumper or grill!\u003c\/p\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141378912514,"sku":"WAT-WR-KMEMBERTIEDOWN","price":70.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-kmembertiedown-2t.jpg?v=1784983787"},{"product_id":"watson-racing-2013-2014-mustang-radiator-enclosure","title":"Watson Racing 2013-2014 Mustang Radiator Enclosure","description":"(Requires FR Front Tubular Bumper)\u003cbr\u003eFits 2013-14 Mustang fascia only.\u003cbr\u003eProvides additional cooling to engine compartment. \u003cbr\u003eIncludes rubber seal.\u003cbr\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141378945282,"sku":"WAT-WR-RADENCLOSURE","price":676.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-radenclosure-2t.jpg?v=1784983785"},{"product_id":"watson-racing-2013-2014-mustang-drag-race-line-lock-and-bracket","title":"Watson Racing 2013-2014 Mustang Drag Race Line Lock and Bracket","description":"Drag Race line lock and bracket \u003cbr\u003eMustang (2013-14) to be used with WR-Brake Line Kit [ WR-DRBRKLNS ]\u003cbr\u003e\u003cbr\u003eAlso recommended to be used with Drag Race Master Cylinder Bracket [ WR-DRMSTRCYLBRC ] (Strange Master Cylinder)","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141378978050,"sku":"WAT-WR-DRLINELOCBRKT","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-drlinelocbrkt-2t.jpg?v=1784983787"},{"product_id":"watson-racing-2005-2014-mustang-road-race-brake-line-hold-down","title":"Watson Racing 2005-2014 Mustang Road Race Brake Line Hold Down","description":"\u003cp\u003eRoad Race Brake Line Hold Down (Used With Road Race Brake Line Kit) 2 PER KIT\u003c\/p\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141379010818,"sku":"WAT-WR-RRBRKLNSUPGRADE","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-rrbrklnsupgrade-2t.jpg?v=1784983788"},{"product_id":"watson-racing-2005-2014-mustang-drag-race-window-net-kit","title":"Watson Racing 2005-2014 Mustang Drag Race Window Net Kit","description":"WINDOW NET KIT- MUSTANG DRAG RACE REQ.WR ROLL CAGE \u003cbr\u003eThe Watson Racing Drag Race Window Net Kit is a great compliment to your Watson Drag Race cage kit! This high-quality, complete kit includes powder coated window net rods with a release buckle already installed, a heim joint\/hinge for flexibility, and all the necessary tabs to weld this to your cage.","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141379043586,"sku":"WAT-WR-DONETKITDR","price":124.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-wdonetkitdr-4t.jpg?v=1784983787"},{"product_id":"watson-racing-2005-2014-mustang-captive-hood-pins","title":"Watson Racing 2005-2014 Mustang Captive Hood Pins","description":"\u003cp\u003eWatson Racing Captive Hood Pins. Combine with our hood pin spools for the strongest hood pin system on the market, proven by years of track time with the Watson Drag Race and Road Race Cars. Slide-style clevis pins are retained in thick stainless steel slide plates, which are mounted to your hood. Incredibly strong 7\/16 zinc plated rods can be adjusted to the height you need, at 5-inch overall length. Likewise, the clevis pins measure quarter-inch in diameter, ensuring your hood stays planted. Sold in pairs. Use with WR-SPOOLHOODPINSET\u003c\/p\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141379076354,"sku":"WAT-WR-HOODPINS","price":23.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-hoodpins-2t.jpg?v=1784983790"},{"product_id":"watson-racing-2005-2014-mustang-th400-transmission-mount","title":"Watson Racing 2005-2014 Mustang TH400 Transmission Mount","description":"\u003cp\u003eWatson Racing's Mustang 2005-2014 Mustang TH400 Transmission Mount and Crossmember! When it comes time to step up to the Turbo 400 for high-power applications for the S197, we make the installation easy with our rigid one-piece transmission mount. The Watson crossmember is constructed of heavy duty 1\/4-inch (6-mm) thick steel and zinc plated for long life – far better protection than powder coating which may chip off over time. Kit includes a TH400 rubber isolator\/mount, and bolts in place of the stock transmission crossmember using your OEM bolts.\u003c\/p\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141379109122,"sku":"WAT-WR-TH400TRANSMNT","price":179.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-th400transmnt-2t.jpg?v=1784983791"},{"product_id":"watson-racing-2005-2014-mustang-hood-pin-spool-set","title":"Watson Racing 2005-2014 Mustang Hood Pin Spool Set","description":"\u003cp\u003eRoad Race or Drag Race Hood Pin Spool Set (pair w\/o hood pins). These race-proven parts are backed by years of track time, and are not the typical flimsy aluminum hood pin bracket. Simply the BEST method of holding your stock or aftermarket hood down. Intended for use with Watson Racing Hood Pins, WR-Hoodpins (shown installed). Made in the USA.\u003c\/p\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141379240194,"sku":"WAT-WR-SPOOLHOODPINSET","price":106.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-spoolhoodpinset-2t.jpg?v=1784983785"},{"product_id":"watson-racing-2005-2014-mustang-drag-race-parachute-bumper","title":"Watson Racing 2005-2014 Mustang Drag Race Parachute Bumper","description":"\u003cp\u003eStandard on our factory built 2014 Drag race cars! Perfect for your 2013 and older Drag Car, or serious Mustang drag car. Designed and developed in conjunction with Ford Performance Racing engineers, this is likely the most track-tested and validated parachute bumper on the planet. Constructed of 4130 chromoly, fully TIG welded, and powder coated black. Designed with the option of adding 4th bolt on each end for added strength (factory bumper only has 3 bolts), which is standard practice for our ’14 factory-built drag car. Places chute receiver through the license plate area for a clean appearance and little modification to the fascia. Originally designed for 2010+ Mustangs, but will fit 2005-2009 as well (hole location may change). Perfect companion with the Watson Racing Chute Mount, part number WR-PARACHUTEMNT  AVAILABLE NOW!\u003c\/p\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141379141890,"sku":"WAT-WR-DRREARBUMPER-P","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-drrearbumper-p-2.jpg?v=1784983790"},{"product_id":"watson-racing-2005-2014-mustang-race-car-seat-mount","title":"Watson Racing 2005-2014 Mustang Race Car Seat Mount","description":"\u003cp\u003eMustang Race Car seat mount – Select Right Hand (passenger), Left Hand (driver), or Both from the options above when ordering. Designed to work with most race seat brands including Sparco, Recaro, and Momo. Weld in design, intended for off road (race) use only. Factory service replacement part for original equipment on the Mustang factory built drag cars.\u003c\/p\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141379207426,"sku":"WAT-WR-MUSTSEATMOUNT","price":132.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-mustseatmount-2t.jpg?v=1784983790"},{"product_id":"watson-racing-2005-2014-mustang-drag-race-rear-seat-delete-carpet-kit","title":"Watson Racing 2005-2014 Mustang Drag Race Rear Seat Delete Carpet Kit","description":"\u003cp\u003eThe Watson Racing rear seat delete carpet kit is designed specifically to work with the Watson Racing 8.50-certified Roll cage and Rear Bulkhead\/Firewall. This is the same exact carpet kit used in the production Mustang Drag Race cars! The upper portion of the carpet kit is designed to be glued to the Watson Bulkhead\/Firewall. The lower portion is actually two halves that are nicely cut and stitched with heavy-duty joining Velcro in the middle, allowing it to be removed easily for any service needs. Available in a dark charcoal color that closely matches the factory dark charcoal\/black carpet. These are made-to-order; please allow 5 business days prior to shipping.\u003c\/p\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141379272962,"sku":"WAT-WR-DRCREARCARPETKIT","price":353.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-drcrearcarpetkit-3t.jpg?v=1784983789"},{"product_id":"watson-racing-2013-2014-mustang-coyote-5-0l-billet-water-neck","title":"Watson Racing 2013-2014 Mustang Coyote 5.0L Billet Water Neck","description":"Standard issue on the 2013 - 2014 factory drag race cars, and now available for your race car! \u003cbr\u003e\u003cbr\u003eThe Watson Racing 5.0L Coyote Billet Water Neck is designed to eliminate the factory Ford external thermostat housing assembly, allowing water\/coolant to circulate full-time. Allows the use of our Hard Radiator Tube Kit, but can also be used with your own custom rubber radiator hoses. \u003cbr\u003e\u003cbr\u003eThis precision CNC-machined \u0026amp; anodized water neck features an O-ring groove to accommodate re-use of the factory O-ring, for a OEM-quality seal. Intended for off-road, race-use only.","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141379404034,"sku":"WAT-WR-WATENECK","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-wateneck-2t.jpg?v=1784983788"},{"product_id":"watson-racing-2005-2014-s197-mustang-low-profile-parachute-mount","title":"Watson Racing 2005-2014 S197 Mustang Low Profile Parachute Mount","description":"\u003cp\u003e\u003cspan\u003eWatson Racing parachute mount fits Ford 2005-2017 Mustangs.Designed and developed alongside Ford Racing for the 2014 factory drag race program, the Watson Racing chute mount will work with any S550 Mustang that is using our Mustang Parachute Bumper, p\/n WR-DRREARBUMPER-P (2005 – 2014) or p\/n WR-15-DRREARBUMPER-P (2015-2017+).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"c-mrkdwn__br\" data-stringify-type=\"paragraph-break\"\u003e\u003c\/span\u003e\u003cspan class=\"c-mrkdwn__br\" data-stringify-type=\"paragraph-break\"\u003e\u003c\/span\u003e\u003cspan\u003eConstructed of CNC mandrel bent 4130 chromoly tubing, precision TIG welded in fixtures, and powder coated, all right here in Michigan. This parachute mount, along with the Parachute Bumper, products of months of extensive testing and engineering, using precise load-cell instrumentation and dozens upon dozens of passes down the track- no shortcuts taken here. Chute bolt pattern will accommodate most 4-bolt patterns on the market today. Release cable and chute not included.\u003c\/span\u003e\u003c\/p\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48141379502338,"sku":"WAT-WR-PARACHUTEMNT-LOW","price":513.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-parachutemnt-low-2t.jpg?v=1784983786"},{"product_id":"watson-racing-harness-lap-belt-mount-s197-s550-wr-harnessmnt","title":"Watson Racing Harness Lap Belt Mount (S197\/S550) - WR-HARNESSMNT","description":"\u003cp\u003e‌\u003cspan style=\"font-family: Roboto, sans-serif; font-size: 16px; orphans: 2; widows: 2; background-color: rgb(255, 255, 255);\"\u003eFinally a quick easy solution for customers running stock seats, (or race seats), our bolt-in roll bar and a seat belt harness. Simply locate our lap belt mount between your rear seat mounts and the floor. Your lap belt portion of your harness simply clips onto the heavy duty eye bolts. Constructed of heavy gauge steel and powder-coated crinkle black for a durable long lasting finish.\u003c\/span\u003e\u003c\/p\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48142892859650,"sku":"WAT-WR-HARNESSMNT","price":115.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/screen_shot_2021-04-05_at_3.38.16_pm.png?v=1784991878"},{"product_id":"watson-racing-2015-mustang-4-point-bolt-in-roll-bar-chromoly-graphite-metallic-wr-15-boltincage-cm","title":"Watson Racing 2015+ Mustang 4 Point Bolt In Roll Bar - Red - WR-15-BOLTINCAGE-CM","description":"\u003cp\u003eWatson Racing 2015+ Mustang 4 Point Bolt In Roll Bar Chromoly - WR-15-BOLTINCAGE-CM\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003e2015+ MUSTANG Chromoly 4-Point Bolt-In Cage:\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nQuite simply the finest 4-point 2015+ Mustang Bolt-In Cage on the market! NOW in CHROMOLY! Borrowing from our exceedingly popular 2015+ Mustang DOM 4-point Bolt-In Cage, we brought the same design principles into the 2015+ Mustang Chromoly 4-point Bolt-In Cage.\u003cbr\u003e\n\u003cbr\u003e\nWhat makes this Watson Racing 2015+ Mustang Chromoly roll bar different?\u003cbr\u003e\n\u003cbr\u003e\n• Weight Savings, down to 42 lbs INSTALLED! Perfect for those adding all kinds of weighty power adders and accessories, or those just simply going as light as possible, but still adding necessary safety.\u003cbr\u003e\n\u003cbr\u003e\n• Offered in \u003cstrong\u003ePowder Coated Textured Black ONLY\u003c\/strong\u003e. To differentiate from all our other Watson Racing Bolt-In Cages. This is the Watson Racing \"Flagship\" of all our Bolt-In Cages.\u003cbr\u003e\n\u003cbr\u003e\n• BOLTS-IN to the FACTORY corner B-pillar gussets using EXISTING HOLES!• Extra strength- not only do we bolt to the front corner gussets, but the rear diagonal bars bolt through the floor directly above a factory cross member, double-layered weld flange- one of the strongest areas at the back of the car!\u003cbr\u003e\n\u003cbr\u003e\n• Minimal trim panel modification. With our cage design, the changes required to the trim panels are VERY minimal. and virtually undistinguishable\u003cbr\u003e\n\u003cbr\u003e\n• Minimal-bend design. Bends in tubes reduce a bar’s effectiveness and safety. We kept the number of bends to a minimum to maximize safety. Where bends are required, we use a CNC precision mandrel bending process to maintain strength.\u003cbr\u003e\n\u003cbr\u003e\n• We sweat the details: 100-percent TIG-welded 1.625\" Dia .083 wall 100-percent powder coated. Shoulder harness retention loops, standard. Welded \/ fixed harness bar and diagonal bar, standard. Precision-machined tube joints for high strength on rear support tubes- no through-bolting here, and notice the plug-welds! Zinc-plated M10 metric fasteners included.\u003cbr\u003e\n\u003cbr\u003e\n• Full seat travel. Since the Watson Racing Bolt-In Cage mounts on top of the factory corner gussets (next to rear seat bottom cushion), the front seats are free to slide all the way back and maintain a comfortable driving position.\u003cbr\u003e\n\u003cbr\u003e\n\u003cem\u003e\u003cstrong\u003e***\u003c\/strong\u003e\u003c\/em\u003e \u003cem\u003e\u003cstrong\u003eUnfortunately, this part does not qualify for free shipping.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\nShipping weight is approximately 55 lbs.\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\u003c\/p\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48145906172162,"sku":"WAT-WR-15-BOLTINCAGE-CM","price":1733.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-15-boltincage-cm-2t.jpg?v=1785005553"},{"product_id":"watson-racing-2015-mustang-4-point-bolt-in-cage-red-wr-15-boltincage-red","title":"Watson Racing 2015-2026 Mustang 4 Point Bolt In Cage (Red) - Red - WR-15-BOLTINCAGE-RED","description":"\u003cp\u003eWatson Racing 2015+ Mustang 4 Point Bolt In Cage (Red) - WR-15-BOLTINCAGE-RED\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003e\n2015+ MUSTANG 4-Point Bolt-In Cage:\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nQuite simply the finest 4-point 2015+ Mustang Bolt-In Cage on the market! Borrowing from our exceedingly popular 2005 - 2014 Mustang 4-point Bolt-In Cage, we brought the same design principals into the 2015+ Mustang Bolt-In Cage.\u003cbr\u003e\n\u003cbr\u003e\n[ \u003ca href=\"http:\/\/www.watsonracing.com\/images\/instructions\/wr-s550-4-6pt-roll-bar-guide.pdf\" rel=\"nofollow\"\u003eINSTALLATION INSTRUCTIONS\u003c\/a\u003e ]\u003cbr\u003e\n\u003cbr\u003e\nWhat makes this 2015+ Mustang Bolt-In Cage different?\u003cbr\u003e\n\u003cbr\u003e\n• BOLTS-IN to the FACTORY corner gussets using EXISTING HOLES! The Watson Racing Bolt-In Cages use EXISTING BOLT HOLES surrounding the factory high-strength steel corner gussets for maximum safety and ease of installation.\u003cbr\u003e\n\u003cbr\u003e\n• Extra strength- not only do we bolt to the front corner gussets, but the rear diagonal bars bolt through the floor directly above a factory cross member- one of the strongest areas at the back of the car!\u003cbr\u003e\n\u003cbr\u003e\n• Minimal trim panel modification. With our design, the changes required to the trim panels are VERY minimal, No cutting your panels in half with our bar!\u003cbr\u003e\n\u003cbr\u003e\n• Minimal-bend design. Bends in tubes reduce a bar’s effectiveness and safety. We kept the number of bends to a minimum to maximize safety. Where bends are required, we use a CNC precision mandrel bending process to maintain strength.\u003cbr\u003e\n\u003cbr\u003e\n• We sweat the details: 100-percent TIG-welded 1.75-inch x.120-inch -wall DOM tubing. 100-percent powder coated. Shoulder harness retention loops are standard. Welded \/ fixed harness bar and diagonal bar are standard. Precision-machined tube joints for high strength on rear support tubes- no through-bolting here, and notice the plug-welds! Zinc-plated M10 metric fasteners included. Weighs in at approximately 55lbs installed.\u003cbr\u003e\n\u003cbr\u003e\n• Full seat travel. Since the Watson Racing Bolt-In Cage mounts on top of the factory corner gussets (next to rear seat bottom cushion), the front seats are free to slide all the way back and maintain a comfortable driving position.\u003cbr\u003e\n\u003cbr\u003e\n\u003cem\u003e\u003cstrong\u003e**\u003c\/strong\u003e\u003c\/em\u003e \u003cem\u003e\u003cstrong\u003eUnfortunately, this part does not qualify for free shipping.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\nShipping weight is approximately 75 lbs. - 61\"x37\"x11\"\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\u003c\/p\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48145906303234,"sku":"WAT-WR-15-BOLTINCAGE-RED","price":1252.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/wr-15boltincr_cc2f52df.jpg?v=1785005555"},{"product_id":"watson-racing-2015-mustang-intercooler-pump-bracket-for-emp-wr-15-intpmpbrkt","title":"Watson Racing 2015+ Mustang Intercooler Pump Bracket For Emp - WR-15-INTPMPBRKT","description":"Watson Racing 2015+ Mustang Intercooler Pump Bracket For Emp - WR-15-INTPMPBRKT\u003cbr\u003e\u003cbr\u003eSpecifically designed to mount the EMP \/ Stewart Water \/ Intercooler Pump, Part # 1030002106 on the forward right frame rail of the 2015+ Mustang. Used on all the Ford Performance 2016+ Cobra Jet Mustangs. Powder Coated in medium gloss black for durability.\u003cbr\u003e\u003cbr\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48145906368770,"sku":"WAT-WR-15-INTPMPBRKT","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/WR-15-INTPMPBRKT-1.jpg?v=1785005555"},{"product_id":"watson-racing-2015-mustang-4-point-hardware-kit-wr-15-4pthardware","title":"Watson Racing 2015+ Mustang 4 Point Hardware Kit - Red - WR-15-4PTHARDWARE","description":"Watson Racing 2015+ Mustang 4 Point Hardware Kit - WR-15-4PTHARDWARE\u003cbr\u003e\u003cbr\u003eReplacement Hardware Kit for 2015+ Mustang 4pt Bolt-in Cage. Includes backing plates and fasteners. Common when cages are swapped out from one car to the next or when installation errors occur.\u003cbr\u003e\u003cbr\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48145906401538,"sku":"WAT-WR-15-4PTHARDWARE","price":125.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/WR-15-4PTHARDWARE-1.jpg?v=1785005552"},{"product_id":"watson-racing-2015-mustang-6-point-hardware-kit-wr-15-6pthardware","title":"Watson Racing 2015+ Mustang 6 Point Hardware Kit - Graphite Grey - WR-15-6PTHARDWARE","description":"Watson Racing 2015+ Mustang 6 Point Hardware Kit - WR-15-6PTHARDWARE\u003cbr\u003e\u003cbr\u003eReplacement Hardware Kit for 2015+ Mustang 6pt Bolt-in Cage. Includes backing plates and fasteners. Common when cages are swapped out from one car to the next or when installation errors occur.\u003cbr\u003e\u003cbr\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48145906499842,"sku":"WAT-WR-15-6PTHARDWARE","price":197.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/WR-15-6PTHARDWARE-1.jpg?v=1785005551"},{"product_id":"watson-racing-2015-mustang-4-point-right-hand-drive-built-to-order-wr-15-boltincage-rhd","title":"Watson Racing 2015+ Mustang 4 Point Right Hand Drive (Built To Order) - Red - WR-15-BOLTINCAGE-RHD","description":"Watson Racing 2015+ Mustang 4 Point Right Hand Drive (Built To Order) - WR-15-BOLTINCAGE-RHD\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cbr\u003e2015+ MUSTANG Right Hand Drive 4-Point Bolt-In Cage: \u003c\/b\u003e\u003cbr\u003e \u003cbr\u003eQuite simply the finest 4-point 2015+ Right Hand Drive Mustang Bolt-In Cage on the market! Borrowing from our exceedingly popular 2005 - 2014 Mustang 4-point Bolt-In Cage, we brought the same design principals into the 2015+ Right Hand Drive Mustang Bolt-In Cage. \u003cbr\u003e\u003cbr\u003e[ \u003ca href=\"http:\/\/www.watsonracing.com\/images\/instructions\/wr-s550-4-6pt-roll-bar-guide.pdf\" rel=\"nofollow\"\u003eINSTALLATION INSTRUCTIONS\u003c\/a\u003e ]\u003cbr\u003e \u003cbr\u003eWhat makes this 2015+ Mustang Bolt-In Cage different? \u003cbr\u003e \u003cbr\u003e• BOLTS-IN to the FACTORY corner gussets using EXISTING HOLES! The Watson Racing Bolt-In Cages use EXISTING BOLT HOLES surrounding the factory high-strength steel corner gussets for maximum safety and ease of installation. \u003cbr\u003e \u003cbr\u003e• Extra strength- not only do we bolt to the front corner gussets, but the rear diagonal bars bolt through the floor directly above a factory cross member- one of the strongest areas at the back of the car! \u003cbr\u003e \u003cbr\u003e• Minimal trim panel modification. With our design, the changes required to the trim panels are VERY minimal, No cutting your panels in half with our bar! \u003cbr\u003e \u003cbr\u003e• Minimal-bend design. Bends in tubes reduce a bar’s effectiveness and safety. We kept the number of bends to a minimum to maximize safety. Where bends are required, we use a CNC precision mandrel bending process to maintain strength. \u003cbr\u003e \u003cbr\u003e• We sweat the details: 100-percent TIG-welded 1.75-inch x.120-inch -wall DOM tubing. 100-percent powder coated. Shoulder harness retention loops are standard. Welded \/ fixed harness bar and diagonal bar are standard. Precision-machined tube joints for high strength on rear support tubes- no through-bolting here, and notice the plug-welds! Zinc-plated M10 metric fasteners included. Weighs in at approximately 55lbs installed.\u003cbr\u003e \u003cbr\u003e• Full seat travel. Since the Watson Racing Bolt-In Cage mounts on top of the factory corner gussets (next to rear seat bottom cushion), the front seats are free to slide all the way back and maintain a comfortable driving position. \u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eBUILT TO ORDER \u003c\/b\u003e\u003c\/i\u003e\u003ci\u003e\u003cb\u003eUnfortunately, this part does not qualify for free shipping. \u003c\/b\u003e\u003c\/i\u003e \u003cbr\u003eShipping weight is approximately 75 lbs. - 61\"x37\"x11\"\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48145906565378,"sku":"WAT-WR-15-BOLTINCAGE-RHD","price":1252.79,"currency_code":"USD","in_stock":true}]},{"product_id":"watson-racing-2015-mustang-irs-solid-rear-bushing-kit-irs-to-body-wr-15-irssldrrbshgs","title":"Watson Racing 2015+ Mustang Irs Solid Rear Bushing Kit, Irs To Body   - WR-15-IRSSLDRRBSHGS","description":"Watson Racing 2015+ Mustang Irs Solid Rear Bushing Kit, Irs To Body\n\n - WR-15-IRSSLDRRBSHGS\u003cbr\u003e\u003cbr\u003eImprove the performance of your 2015+ Mustang by elimating the compliance of the factory rear subframe bushings! Our kit is machined from 6061 aluminum then anodized in a graphite gray color.  The primary function of the kit is to reduce wheel hop and help improve traction. We recommend using this kit along side the WR-4425-M I.R.S. Differental to Subframe Solid Bushing kit \u0026amp; the Ford Performance M-4130-M Half Shaft Upgrade Kit.\u003cbr\u003e\u003cbr\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48145906598146,"sku":"WAT-WR-15-IRSSLDRRBSHGS","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/WR-15-IRSSLDRRBSHGS-1.jpg?v=1785005554"},{"product_id":"watson-racing-2015-cobra-jet-rear-belly-pan-wr-15-rearbellypan","title":"Watson Racing 2015+ Cobra Jet Rear Belly Pan - WR-15-REARBELLYPAN","description":"Watson Racing 2015+ Cobra Jet Rear Belly Pan - WR-15-REARBELLYPAN\u003cbr\u003e\u003cbr\u003eAs fitted to all the Watson Racing 2015 \/ 2016 Cobra Jet Mustangs. Though not on the original Ford Production Cobra Jets, these add a much needed feature of retaining the rear bumper cover from becoming its own parachute, as well as a cleaner look to the unused exhaust cutouts. The '15-'17 model is different from the '18 and newer. Please specify your year when ordering.\u003cbr\u003e\u003cbr\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48145906663682,"sku":"WAT-WR-15-REARBELLYPAN","price":225.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/WR-15-REARBELLYPAN-1.jpg?v=1785005552"},{"product_id":"watson-racing-2015-mustang-low-profile-parachute-bumper-wr-15-parachutemnt-l","title":"Watson Racing 2015+ Mustang Low Profile Parachute Bumper - WR-15-PARACHUTEMNT-L","description":"\u003cp\u003eWatson Racing 2015+ Mustang Low Profile Parachute Bumper - WR-15-PARACHUTEMNT-L\u003cbr\u003e\n\u003cbr\u003e\nDesigned to be lightweight and low profile to reduce drag, because every tenth counts! Works with the 2015+ Mustang using our Mustang Parachute Bumper, p\/n \u003ca href=\"http:\/\/shop.watsonracing.com\/2015-Mustang-Parachute-Bumper-p\/wr-15-drrearbumper-p.htm\"\u003eWR-15-DRREARBUMPER-P\u003c\/a\u003e (2015--2019)\u003cbr\u003e\n\u003cbr\u003e\nConstructed of CNC mandrel bent 4130 chromoly tubing, precision TIG welded in fixtures, and powder coated, all right here in Michigan. This low profile Parachute Mount, along with the Parachute Bumper, are products from months of extensive testing and engineering, using precise load-cell instrumentation and dozens upon dozens of passes down the track- no shortcuts taken here. Chute bolt pattern will accommodate most 4-bolt patterns on the market today.\u003cbr\u003e\n\u003cbr\u003e\n* Release cable and chute not included\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\u003c\/p\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48145906729218,"sku":"WAT-WR-15-PARACHUTEMNT-L","price":455.17,"currency_code":"USD","in_stock":true}]},{"product_id":"watson-racing-2015-mustang-rocker-close-outs-wr-15-stonedeflector","title":"Watson Racing 2015+ Mustang Rocker Close-Outs - WR-15-STONEDEFLECTOR","description":"Watson Racing 2015+ Mustang Rocker Close-Outs - WR-15-STONEDEFLECTOR\u003cbr\u003e\u003cbr\u003eWith a bigger tire and the need to remove your rear quarter wheel-well liner, you're probably tired of having to clean out your rockers from all that tire-burnout debris. Upon launch and acceleration that debris starts finding a way out of that exposed rocker and recklessly in front of your grip thirsty tire. Here's your easy solution...Close it up and forget about it! The WR Rocker Close-Outs do just that. Made to fit and cover what the open channel of the rocker left behind. A few small rivet attachments and you are good to go. Made from aluminum then powder coated for exceptional durability.\u003cbr\u003e\u003cbr\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48145906761986,"sku":"WAT-WR-15-STONEDEFLECTOR","price":18.0,"currency_code":"USD","in_stock":true}]},{"product_id":"watson-racing-2015-mustang-front-brake-duct-pair-wr-15-rrbrkductset","title":"Watson Racing 2015+ Mustang Front Brake Duct Pair - WR-15-RRBRKDUCTSET","description":"Watson Racing 2015+ Mustang Front Brake Duct Pair - WR-15-RRBRKDUCTSET\u003cbr\u003e\u003cbr\u003eA direct replacement for the Ford Performance 2017 FP350s Race Cars. These are designed to be used with the AP Racing Calipers. Built to withstand the rigors of competitive track use with constant heat cycles to the front calipers.\u003cbr\u003e***Does not come with the silicone flex tubing***\u003cbr\u003e\u003cbr\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48145906827522,"sku":"WAT-WR-15-RRBRKDUCTSET","price":410.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/WR-15-RRBRKDUCTSET-1.jpg?v=1785005555"},{"product_id":"watson-racing-2015-mustang-cradle-water-pump-bkts-for-pw-611-wr-15-wtrpmpbktpr","title":"Watson Racing 2015+ Mustang Cradle Water Pump Bkts For Pw-611 - WR-15-WTRPMPBKTPR","description":"Watson Racing 2015+ Mustang Cradle Water Pump Bkts For Pw-611 - WR-15-WTRPMPBKTPR\u003cbr\u003e\u003cbr\u003eFor those of you wanting to ditch the OEM water pump and go Cobra-Jet level. These are the way to go using the spec'd  M-8501-M50CJ16 water pump used in all the 2016 CJ's.\u003cbr\u003e\u003cbr\u003eBuilt tough enough to withstand the rigors of anything you can throw at it with heavy duty powder coated steel.\u003cbr\u003e\u003cbr\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48145906860290,"sku":"WAT-WR-15-WTRPMPBKTPR","price":25.0,"currency_code":"USD","in_stock":true}]},{"product_id":"watson-racing-2015-mustang-drag-race-console-for-precision-performance-shifter-wr-18-drconsole","title":"Watson Racing 2015+ Mustang Drag Race Console For Precision Performance Shifter - WR-18-DRCONSOLE","description":"Watson Racing 2015+ Mustang Drag Race Console For Precision Performance Shifter - WR-18-DRCONSOLE\u003cbr\u003e\u003cbr\u003eWatson Racing is proud to offer its low-profile, stamped aluminum, powder coated replacement center console for the serious race car builder. As a service replacement part for the original equipment on our factory built 2016+ Mustang Drag Race Cars. This console is intended to be used in conjunction with the Drag-Race-specific Plain Center Stack Panel and \u003cb\u003ePRECISION Brand \u003ci\u003eKwik-Shift\u003c\/i\u003e\u003c\/b\u003e Shifter. The console eliminates the bulky factory center console and arm rest that gets in the way of shifting during a drag race, and positions your arm in a more natural, comfortable position. Unique mounting system allows for quick removal in the pits should you need to access the shifter. \u003cb\u003ePowder coated \u003c\/b\u003ea textured black finish for durability.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.watsonracing.com\/images\/instructions\/DragRaceConsole.pdf\" rel=\"nofollow\"\u003eINSTALLATION INSTRUCTIONS\u003cbr\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e","brand":"Watson Racing","offers":[{"title":"Default Title","offer_id":48145906925826,"sku":"WAT-WR-18-DRCONSOLE","price":448.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/WR-18-DRCONSOLE-1.jpg?v=1785005555"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/collections\/Watson_Racing.png?v=1787070588","url":"https:\/\/www.lethalperformance.com\/collections\/watson-racing.oembed","provider":"Lethal Performance","version":"1.0","type":"link"}