{"title":"VMP Fuel System Upgrades","description":null,"products":[{"product_id":"vmp-enf002-dual-plug-n-play-fuel-pump-voltage-booster-40amp-2015-2019-shelby-gt350","title":"VMP ENF002 Dual Plug N Play Fuel Pump Voltage Booster 40amp (2015-2019 Shelby GT350)","description":"\u003cstrong\u003eDUAL VMP PLUG N PLAY FUEL PUMP BOOSTERS FOR 16-18 GT350 WITH TWIN PUMPS\/FPDM\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eUse 2 units at a special reduced price for better cooling and full redundancy.\u003cbr\u003e\u003cbr\u003eYou receive 2 units in this package plus 2 plug n play harnesses.\u003cbr\u003eMore fuel than you know what to do with! \u003cbr\u003e\u003cbr\u003eWe all know the proven benefits of a VMP Tuning Fuel Pump Booster! Efficient, continuous 17v output (40A) designed to get the most performance from your stock or aftermarket pumps. It stabilizes voltage as well as increasing flow rate. Simply tossing a larger set of injectors into the system won't necessarily be the answer to your high performance fueling needs.\u003cbr\u003e\u003cbr\u003eUntil now, Fuel Pump Boosters or \"Boost-A-Pumps(r)\", (a name owned by Kenne-Bell) have been seen as an \"I'll get to it.....someday\" proposition. Why? Because the average person doesn't have the experience nor confidence that they'll hook them up correctly. We heard you and we've solved the problem, making it uber-simple to install the performance headroom you need, doing it right the first time!\u003cbr\u003e\u003cbr\u003eWe recently had some questions about competing fuel pump boosters and how they compare to the VMP unit. The VMP unit is designed to be always on, it's a high efficiency unit and does not require any additional power wires or pressure switches. We do include a 30 amp fuse to replace the stock 20 amp fuse in the underhood fuse box (specific applications). We hook ours up all the time to prevent any pressure spikes that may occur when a booster is triggered in the middle of a pull by a pressure switch. In the case of 13-14 GT500, the computer is already modulating fuel pump duty cycle and only giving the car the pressure and flow it needs. For tuning, we recommending you reduce the Fuel Pump Voltage Table (under Returnless fuel pump) by 1-2 volts all over and fine tune from there by datalogging. On the 11-14 5.0L Mustang the factory single pump is modulated between high and low speeds by the computer. We recommend changing the high speed threshold in the tune (under Returnless fuel pump) from 0.80 lb\/min to 3 lb\/min (see below) on blower cars. On naturally aspirated cars this value can be raised to 4-5lb\/min for NA tunes and lowered back down to 2-3lb\/min on the nitrous tune. The same values would be recommended for cars running E85.","brand":"VMP Tuning","offers":[{"title":"Default Title","offer_id":47954734383362,"sku":"VMP-ENF002","price":539.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/VMP-ENF002.Fuel-Pump-Booster-16-18-GT350.1.jpg?v=1784983955"},{"product_id":"vmp-enf021-plug-and-play-fuel-pump-voltage-booster-2011-2023-f-150","title":"VMP ENF021 Plug and Play Fuel Pump Voltage Booster (2011-2023 F-150)","description":"VMP Fuel Pump Voltage booster\/regulator module for 11-23 F-150 with plug and play harness and F-150 extension harness to mount your booster safely inside the cabin away from the elements!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eHigh quality booster and harnesses made in the USA\u003cbr\u003eCustom designed by VMP\u003cbr\u003eEasy plug and play installation\u003cbr\u003eFits 11-23 F-150\u003cbr\u003eGet the most out of your fuel system with 18 volt continuous output\u003cbr\u003eNo knobs or switches to accidentally adjust, full regulated power all the time.\u003cbr\u003e40 amp rating\u003cbr\u003e\u003cbr\u003eRecommended for supercharged, turbo, and nitrous cars with extra fuel demands, will allow the factory pump to support an additional 30-50% more horsepower without loss of fuel pressure.\u003cbr\u003e","brand":"VMP Tuning","offers":[{"title":"Default Title","offer_id":47954734579970,"sku":"VMP-ENF021","price":377.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/VMP-ENF021.jpg?v=1784983988"},{"product_id":"vmp-enf005-dual-plug-n-play-fuel-pump-voltage-booster-40amp-2013-2014-gt500","title":"VMP ENF005 Dual Plug N Play Fuel Pump Voltage Booster 40amp (2013-2014 GT500)","description":"\u003cp\u003e\u003cstrong\u003eDUAL VMP PLUG N PLAY FUEL PUMP BOOSTERS FOR 13-14 GT500 WITH TWIN PUMPS\/FPDM\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nUse 2 units at a special reduced price for better cooling and full redundancy.\u003cbr\u003e\n\u003cbr\u003e\nYou receive 2 units in this package plus 2 plug n play harnesses.\u003cbr\u003e\nMore fuel than you know what to do with!\u003cbr\u003e\nSupports 1000HP (850rwhp) on E85 with ID1000s\u003cbr\u003e\n\u003cbr\u003e\nWe all know the proven benefits of a VMP Tuning Fuel Pump Booster! Efficient, continuous 17v output (40A) designed to get the most performance from your stock or aftermarket pumps. It stabilizes voltage as well as increasing flow rate. Simply tossing a larger set of injectors into the system won't necessarily be the answer to your high performance fueling needs.\u003cbr\u003e\n\u003cbr\u003e\nUntil now, Fuel Pump Boosters or \"Boost-A-Pumps(r)\", a name owned by Kenne-Bell) have been seen as an \"I'll get to it.....someday\" proposition. Why? Because the average person doesn't have the experience nor confidence that they'll hook them up correctly. We heard you and we've solved the problem, making it uber-simple to install the performance headroom you need, doing it right the first time!\u003cbr\u003e\n\u003cbr\u003e\nWe recently had some questions about competing fuel pump boosters and how they compare to the VMP unit. The VMP unit is designed to be always on, it's a high efficiency unit and does not require any additional power wires or pressure switches. We do include a 30 amp fuse to replace the stock 20 amp fuse in the underhood fuse box. We hook ours up all the time to prevent any pressure spikes that may occur when a booster is triggered in the middle of a pull by a pressure switch. In the case of 13-14 GT500, the computer is already modulating fuel pump duty cycle and only giving the car the pressure and flow it needs. For tuning, we recommending you reduce the Fuel Pump Voltage Table (under Returnless fuel pump) by 1-2 volts all over and fine tune from there by datalogging. On the 11-14 5.0L Mustang the factory single pump is modulated between high and low speeds by the computer. We recommend changing the high speed threshold in the tune (under Returnless fuel pump) from 0.80 lb\/min to 3 lb\/min (see below) on blower cars. On naturally aspirated cars this value can be raised to 4-5lb\/min for NA tunes and lowered back down to 2-3lb\/min on the nitrous tune. The same values would be recommended for cars running E85.\u003c\/p\u003e","brand":"VMP Tuning","offers":[{"title":"Default Title","offer_id":48141397393666,"sku":"VMP-ENF005","price":539.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/vmp-enf005.1.jpg?v=1784983893"},{"product_id":"vmp-enf010-plug-n-play-fuel-pump-voltage-booster-40amp-2005-2010-mustang-gt","title":"VMP ENF010 Plug N Play Fuel Pump Voltage Booster 40amp (2005-2010 Mustang GT)","description":"\u003cstrong\u003eNEW VMP PLUG N PLAY FUEL PUMP BOOSTER FOR 05-10 MUSTANG GT\/V6\u003c\/strong\u003e\u003cbr\u003eWe all know the proven benefits of a VMP Tuning Fuel Pump Booster! Efficient, continuous 17v output (40A) designed to get the most performance from your stock or aftermarket pumps. It stabilizes voltage as well as increasing flow rate. Simply tossing a larger set of injectors into the system won't necessarily be the answer to your high performance fueling needs.\u003cbr\u003e\u003cbr\u003eUntil now, Fuel Pump Boosters (or \"Boost-A-Pumps(r)\", a name owned by Kenne-Bell) have been seen as an \"I'll get to it.....someday\" proposition. Why? Because the average person doesn't have the experience nor confidence that they'll hook them up correctly. We heard you and we've solved the problem, making it uber-simple to install the performance headroom you need, doing it right the first time!\u003cbr\u003e\u003cbr\u003eWe recently had some questions about competing fuel pump boosters and how they compare to the VMP unit. The VMP unit is designed to be always on, it's a high efficiency unit and does not require any additional power wires or pressure switches. We do include a 30 amp fuse to replace the stock 20 amp fuse in the underhood fuse box. We hook ours up all the time to prevent any pressure spikes that may occur when a booster is triggered in the middle of a pull by a pressure switch. In the case of 05-10 Mustangs and other Fords that utilize a returnless fuel system, the computer is already modulating fuel pump duty cycle and only giving the car the pressure and flow it needs. For tuning, we recommending you reduce the Fuel Pump Voltage Table (under Returnless fuel pump) by 1-2 volts all over and fine tune from there by datalogging.","brand":"VMP Tuning","offers":[{"title":"Default Title","offer_id":48141410271490,"sku":"VMP-ENF010","price":332.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/VMP-ENF010.Fuel-Pump-Booster-Harness-05-10-GT.1.jpg?v=1784983959"},{"product_id":"vmp-enf016-fuel-pump-voltage-booster-40amp-wire-in-mustang-gt-cobra-mach-1-f150","title":"VMP ENF016 Fuel Pump Voltage Booster 40amp Wire-In (Mustang GT \/ Cobra \/ Mach-1 \/ F150)","description":"\u003cdiv\u003eVMP Fuel Pump Voltage booster\/regulator module - wire-in model\u003c\/div\u003e\n\u003cdiv\u003e***Updated for 2024 with a complete overhaul for a smaller overall package!!***\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e-Fixed 18.5v continuous output\u003c\/div\u003e\n\u003cdiv\u003e-high efficiency\u003c\/div\u003e\n\u003cdiv\u003e-40amp rating\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eNo knobs or switches to accidentally adjust, full regulated power all the time.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eEasy 2 wire installation for the non-pnp version. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eINSTRUCTIONS INCLUDED\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eRecommended for supercharged, turbo, and nitrous cars with extra fuel demands, will allow the factory pump to support an additional 30-50% more horsepower without loss of fuel pressure.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eOn 05-10 GT it is good for 550-600rwhp on the stock pump, on 11-14 GT its good for 700-800rwhp on the stock pump. Dual units recomended for GT500. Works on any vehicle's fuel system. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e*We recently had some questions about competing fuel pump boosters and how they compare to the VMP unit. The VMP unit is designed to be always on, it's a high efficiency unit and does not require any additional power wires or pressure switches. We do include a 30 amp fuse to replace the stock 20 amp fuse in the underhood fuse box. We hook ours up all the time to prevent any pressure spikes that may occur when a booster is triggered in the middle of a pull by a pressure switch. In the case of 11-14 GT500, the computer is already modulating fuel pump duty cycle and only giving the car the pressure and flow it needs. For tuning, we recommending you reduce the Fuel Pump Voltage Table (under Returnless fuel pump) by 1-2 volts all over and fine tune from there by datalogging. On the 11-14 5.0L Mustang the factory single pump is modulated between high and low speeds by the computer. We recommend changing the high speed threshold in the tune (under Returnless fuel pump) from 0.80 lb\/min to 3 lb\/min (see below) on blower cars. On naturally aspirated cars this value can be raised to 4-5lb\/min for NA tunes and lowered back down to 2-3lb\/min on the nitrous tune. The same values would be recommended for cars running E85.\u003c\/div\u003e","brand":"VMP Tuning","offers":[{"title":"Default Title","offer_id":48141410402562,"sku":"VMP-ENF016","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/vmp-enf016.1.jpg?v=1784983956"},{"product_id":"vmp-enf004-dual-plug-n-play-fuel-pump-voltage-booster-40amp-2007-2010-shelby-gt500","title":"VMP ENF004 Dual Plug N Play Fuel Pump Voltage Booster 40amp (2007-2010 Shelby GT500)","description":"\u003cstrong\u003eDUAL VMP PLUG N PLAY FUEL PUMP BOOSTERS FOR 07-10 GT500 WITH TWIN PUMPS\/FPDM\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eUse 2 units at a special reduced price for better cooling and full redundancy.\u003cbr\u003e\u003cbr\u003eYou receive 2 units in this package plus 2 plug n play harnesses.\u003cbr\u003eMore fuel than you know what to do with! \u003cbr\u003e\u003cbr\u003eWe all know the proven benefits of a VMP Tuning Fuel Pump Booster! Efficient, continuous 17v output (40A) designed to get the most performance from your stock or aftermarket pumps. It stabilizes voltage as well as increasing flow rate. Simply tossing a larger set of injectors into the system won't necessarily be the answer to your high performance fueling needs.\u003cbr\u003e\u003cbr\u003eUntil now, Fuel Pump Boosters or \"Boost-A-Pumps(r)\", a name owned by Kenne-Bell) have been seen as an \"I'll get to it.....someday\" proposition. Why? Because the average person doesn't have the experience nor confidence that they'll hook them up correctly. We heard you and we've solved the problem, making it uber-simple to install the performance headroom you need, doing it right the first time!\u003cbr\u003e\u003cbr\u003eWe recently had some questions about competing fuel pump boosters and how they compare to the VMP unit. The VMP unit is designed to be always on, it's a high efficiency unit and does not require any additional power wires or pressure switches. We do include a 30 amp fuse to replace the stock 20 amp fuse in the underhood fuse box. We hook ours up all the time to prevent any pressure spikes that may occur when a booster is triggered in the middle of a pull by a pressure switch. In the case of the GT500, the computer is already modulating fuel pump duty cycle and only giving the car the pressure and flow it needs. For tuning, we recommending you reduce the Fuel Pump Voltage Table (under Returnless fuel pump) by 1-2 volts all over and fine tune from there by datalogging. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes for 07-09:\u003c\/strong\u003e\u003cbr\u003eWhen installing boosters the factory fuses should be upgraded, stock size is 15amp or 20amp and will tend to blow at the end of a WOT pull. Replacing them with 30 amp fuses fixes this.\u003cbr\u003e\u003cbr\u003eDue to the GT500 being a mid-run addition in 07 the fuses for each Pump\/FPDM (driver module) are located in different places.\u003cbr\u003e\u003cbr\u003eThe drivers side FPDM fuse is #41 in the underhood fuse box needs to be upgraded.\u003cbr\u003eThe passenger side FPDM fuse is in the fuse box mounted on the strut tower, it must be upgraded.\u003cbr\u003e*07-09 GT500s use an aux fusebox to power the second pump, that box is fed by Fuse #66 in the main underhood fuse box (labeled as heated seats, which GT500s do not have), this fuse should be upgraded in addition to the primary fuel pump fuse.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes for 2010:\u003c\/strong\u003e\u003cbr\u003eF13 and F14 in the underhood fuse box should be upgraded to 30amp.","brand":"VMP Tuning","offers":[{"title":"Default Title","offer_id":48141410730242,"sku":"VMP-ENF004","price":539.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/VMP-ENF004.Fuel-Pump-Booster-07-10-GT500.1.jpg?v=1784983956"},{"product_id":"vmp-plug-and-play-fuel-pump-voltage-booster-2011-2026-mustang-5-0l-enf000","title":"VMP  Plug and Play Fuel Pump Voltage Booster (2011-2026 Mustang 5.0L) - ENF000","description":"\u003cp\u003e\u003cstrong\u003eVMP PLUG N PLAY FUEL PUMP BOOSTER FOR 11-24 MUSTANG\u003c\/strong\u003e\u003cbr\u003e\nWe all know the proven benefits of a VMP Performance Fuel Pump Booster! Efficient, continuous 18v output (40A) designed to get the most performance from your stock or aftermarket pumps. It stabilizes voltage as well as increasing flow rate. Simply tossing a larger set of injectors into the system won't necessarily be the answer to your high performance fueling needs.\u003cbr\u003e\n\u003cbr\u003e\nFits 11-24 Mustang V6, GT, and Ecoboost\u003cbr\u003e\nGT350 and GT500 require dual boosters\u003cbr\u003e\n05-10 Mustangs use a different PnP harness, see recommended items\u003cbr\u003e\n99-04 Mustangs require the use of a wire-in booster, see recommended items\u003cbr\u003e\nUntil now, Fuel Pump Boosters have been seen as an \"I'll get to it.....someday\" proposition. Why? Because the average person doesn't have the experience nor confidence that they'll hook them up correctly. We heard you and we've solved the problem, making it uber-simple to install the performance headroom you need, doing it right the first time!\u003cbr\u003e\n\u003cbr\u003e\nDual pump systems, like the GT500 should run twin units for redundancy and lower temps, see our recommended items below.\u003cbr\u003e\n\u003cbr\u003e\nWe recently had some questions about competing fuel pump boosters and how they compare to the VMP unit. The VMP unit is designed to be always on, it's a high efficiency unit and does not require any additional power wires or pressure switches. We do include a 30 amp fuse to replace the stock 20 amp fuse in the underhood fuse box. We hook ours up all the time to prevent any pressure spikes that may occur when a booster is triggered in the middle of a pull by a pressure switch. In the case of 11-14 GT500, the computer is already modulating fuel pump duty cycle and only giving the car the pressure and flow it needs. For tuning, we recommending you reduce the Fuel Pump Voltage Table (under Returnless fuel pump) by 1-2 volts all over and fine tune from there by datalogging. On the 11-15 5.0L Mustang the factory single pump is modulated between high and low speeds by the computer. We recommend changing the high speed threshold in the tune (under Returnless fuel pump) from 0.80 lb\/min to 3 lb\/min (see below) on blower cars. On naturally aspirated cars this value can be raised to 4-5lb\/min for NA tunes and lowered back down to 2-3lb\/min on the nitrous tune. The same values would be recommended for cars running E85. The 2015-18 5.0L requires slight modification to connector.\u003c\/p\u003e","brand":"VMP Tuning","offers":[{"title":"Default Title","offer_id":48150105620738,"sku":"VMP-ENF000","price":332.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/VMP-ENF000.Fuel-Pump-Booster-11-19-Mustang.1.jpg?v=1785025192"},{"product_id":"vmp-enf001-billet-fuel-rail-kit-for-short-48mm-injectors-2011-2017-5-0l-coyote","title":"VMP ENF001 Billet Fuel Rail Kit for Short 48mm Injectors (2011-2017 5.0L Coyote)","description":"-Easy direct fit installation, no modifications needed\u003cbr\u003e-Constructed of high-quality billet aluminum\u003cbr\u003e-Direct replacement for Coyote 5.0 L, Roadrunner (BOSS 302) 5.01, and Voodoo 5.21 fuel rails with stock intake or positive displacement blower like VMP or Roush\u003cbr\u003e\u003cbr\u003eHigh-performance vehicles demand more fuel flow delivery to the engine. To meet those needs, VMP designed a fuel rail kit that's constructed to flow more fuel at a consistent output, allowing greater power delivery and improved throttle response. \u003cbr\u003e\u003cbr\u003eConstructed of high-quality billet aluminum, the VMP fuel rail kit is lightweight, strong and durable. Anodized, for rust protection, these fuel rails are designed to last. \u003cbr\u003e\u003cbr\u003eThis VMP fuel rail kit is machined differently and works with the lower height 48 mm injectors such as  ID725, ID1000, ID1300 M-9593-MU52 (56 lb) and M-9593-G302(47 lb aka 52 lb). \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003cbr\u003eAlways lube injector bosses and o-ring fittings before installation.\u003cbr\u003eIf you're using stock injectors or the common Roush\/FRPP M-9593-LU47 injectors, these rails will not fit without longer M6x110 mm bolts (91292A420) and .450\" tall spacers.\u003cbr\u003eFor ID725, ID1000, and ID1300 injectors, simply remove the purple height extenders from the top of the injector.\u003cbr\u003e\u003cbr\u003eIf you are running stock injectors or tall 60 mm injectors you must purchase the fuel rail bolt and spacer kit.\u003cbr\u003e\u003cbr\u003e","brand":"VMP Tuning","offers":[{"title":"Default Title","offer_id":48150150676738,"sku":"VMP-ENF001","price":359.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/VMP-ENF001.1.jpg?v=1785025511"},{"product_id":"vmp-enf011-billet-fuel-rails-for-short-48mm-injectors-2011-2017-5-0l-coyote","title":"VMP ENF011 Billet Fuel Rails for Short 48mm Injectors (2011-2017 5.0L Coyote)","description":"Includes two fuel rails ONLY. This item is for customers with their own lines and fittings. \u003cbr\u003e\u003cbr\u003eThese rails are machined differently to work with the lower height 48mm injectors like ID725, ID1000, ID1300 M-9593-MU52 (56lb), M-9593-G302(47lb aka 52lb). \u003cbr\u003e\u003cbr\u003e*If you are using stock injectors or the common Roush\/FRPP M-9593-LU47 injectors these rails will not fit without longer M6x110mm bolts (91292A420) and .450\" tall spacers.\u003cbr\u003e\u003cbr\u003e*For ID725, ID1000, ID1300 injectors simply remove the purple height extenders from the top of the injector.\u003cbr\u003e\u003cbr\u003eALWAYS LUBE INJECTOR BOSSES AND O-RING FITTINGS BEFORE INSTALLATION\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNo fittings or hoses are included\u003cbr\u003e\u003cbr\u003eIf you are running stock injectors or tall 60mm injectors you must purchase the Fuel rail bolt and spacer kit.\u003c\/strong\u003e","brand":"VMP Tuning","offers":[{"title":"Default Title","offer_id":48150150709506,"sku":"VMP-ENF011","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/VMP-ENF011.1.jpg?v=1785025514"},{"product_id":"vmp-billet-fuel-rail-kit-2020-shelby-gt500-5-2l-vmp-enf035-2026-mustang-dark-horse-sc","title":"VMP Billet Fuel Rail Kit (2020-2022 Shelby GT500 5.2L \/ 2026 Mustang Dark Horse SC) - VMP-ENF035","description":"\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 2020-2022 Shelby GT500 and 2026 Mustang Dark Horse SC.\u003c\/p\u003e\nThe first billet fuel rails available for the 2020 Shelby GT500 5.2 L predator engine.  Our rails are a direct replacement for the factory rails and include all fittings, adapters, and a crossover line. We custom machine these rails to match the look and feel of the 2020 GT500 engine bay.  Beautiful and functional, these rails have #8 fittings front and rear to support future fuel system upgrades.  \u003cbr\u003e\u003cbr\u003e\n\nIncludes:\u003cbr\u003e\nOne set of billet rails with #8 feed front and rear\u003cbr\u003e\nStock feed line adapter\u003cbr\u003e\nAll required hardware\u003cbr\u003e\nAll required fittings\u003cbr\u003e\n#8 stainless steel braided teflon crossover line\u003cbr\u003e\u003cbr\u003e\n\nOptional tall mounts allow shorter 48mm injectors to be used without height adapter.","brand":"VMP Tuning","offers":[{"title":"Default Title","offer_id":48150231089410,"sku":"VMP-ENF035","price":359.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/VMP-ENF035.1.jpg?v=1785025997"},{"product_id":"vmp-aluminum-fuel-rail-kit-for-non-positive-displacement-supercharged-cars-2018-mustang-gt-vmp-enf039","title":"VMP Aluminum Fuel Rail Kit for Non-Positive Displacement Supercharged Cars (2018 Mustang GT) - VMP-ENF039","description":"Easy direct fit installation, no modifications needed\u003cbr\u003e\nIncludes all Plumbing needed \u003cbr\u003e\nConstructed of high-quality billet aluminum\u003cbr\u003e\nDirect Replacement for 18+ Coyote 5.0 L\u003cbr\u003e\nAssembly Instructions Included\u003cbr\u003e\u003cbr\u003e\nThis fuel rail kit is designed for vehicles utilizing the stock intake manifold or manifolds that would use stock fuel rails such as centrifugal supercharged, turbocharged, or nitrous applications that demand more fuel flow delivery to the engine.\u003cbr\u003e\u003cbr\u003e\n\n \n\nVMP designed our fuel rail kit to flow more fuel at a consistent output, allowing greater power delivery and improved throttle response. \u003cbr\u003e\u003cbr\u003e\n\nIt is constructed of high-quality billet aluminum to be lightweight, strong and durable. We chose an anodized finish for corrosion resistance and for long service life. \u003cbr\u003e\u003cbr\u003e\n\n\n\nThe plumbing kit comes standard with this kit so your install to the OE Retunless Style Fuel system found in the 18+ Coyotes is seamless and doesn't leave you running to the part store!","brand":"VMP Tuning","offers":[{"title":"Default Title","offer_id":48150231318786,"sku":"VMP-ENF039","price":359.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/VMP-ENF039.jpg?v=1785025996"},{"product_id":"vmp-plug-play-return-style-fuel-system-2018-mustang-gt-vmp-enf043","title":"VMP Plug \u0026 Play Return Style Fuel System (2018+ Mustang GT) - VMP-ENF043","description":"\u003cp\u003e-Easy plug and play installation\u003cbr\u003e\n-8 PTFE braided stainless steel feed line for maximum flow and NO fuel vapor odors\u003cbr\u003e\n-All fittings, hose, and hardware for basic installation included*\u003cbr\u003e\n-Pump, E85, and race gas compatible\u003cbr\u003e\n-Fits 2018+ Mustang GT equipped with aftermarket fuel rails that accept -8an feed.\u003cbr\u003e\n-Dual high-pressure DW 400 Fuel Pumps\u003cbr\u003e\n-Proven to support 1100+ rwhp\u003cbr\u003e\n-All lines are pre-cut and have fittings pre-crimped\u003cbr\u003e\n-Includes our custom plug and play wiring harness for ease of installation\u003cbr\u003e\n-Dual relay harness design provides a dedicated circuit for each pump, minimizing voltage drop\u003cbr\u003e\n-Retains factory FPDM for key-on prime, for ease of tuning, installation, and to prevent dead batteries from \"always on\" fuel pump wiring\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eNote\u003c\/strong\u003e: This kit required aftermarket fuel rails.\u003c\/div\u003e","brand":"VMP Tuning","offers":[{"title":"Default Title","offer_id":48150241345794,"sku":"VMP-ENF043","price":1979.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/VMP-ENF043.jpg?v=1785026059"},{"product_id":"vmp-plug-play-return-style-fuel-system-2011-2017-mustang-gt-vmp-enf024","title":"VMP Plug \u0026 Play Return Style Fuel System (2011-2017 Mustang GT) - VMP-ENF024","description":"\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEasy plug and play installation\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e-8 PTFE braided stainless steel feed line for maximum flow and NO fuel vapor odors\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll fittings, hose, and hardware for basic installation included*\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePump, E85, and race gas compatible\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFits 2011-2017 Ford Mustang GT\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDual high-pressure DW Pumps 400 fuel pumps\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eProven to support 1100+ rwhp\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll lines are pre-cut and have fittings pre-crimped\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIncludes our custom plug and play wiring harness for ease of installation\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDual relay harness design provides a dedicated circuit for each pump, minimizing voltage drop\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRetains factory FPDM for key-on prime, for ease of tuning, installation, and to prevent dead batteries from \"always on\" fuel pump wiring\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VMP Tuning","offers":[{"title":"Default Title","offer_id":48150241640706,"sku":"VMP-ENF024","price":1979.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/VMP-ENF024.Plug-Play-Fuel-System.1.jpg?v=1785026061"}],"url":"https:\/\/www.lethalperformance.com\/collections\/vmp-fuel-system.oembed","provider":"Lethal Performance","version":"1.0","type":"link"}