{"title":"VMP Heat Exchangers \u0026 Intercoolers","description":null,"products":[{"product_id":"vmp-street-intercooler-upgrade-07-14-gt500-11-17-coyote-vmp-suc050","title":"VMP Street Intercooler Upgrade (07-14 GT500 \u0026 11-17 Coyote) - VMP-SUC050","description":"\u003cdiv\u003e\u003cstrong\u003eVMP '07-'14 GT500 \u0026amp; '11-'17 Coyote Street Intercooler upgrade\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eThis intercooler upgrade includes:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eVMP Intercooler core\u003c\/div\u003e\n\u003cdiv\u003eLoctite\u003c\/div\u003e\n\u003cdiv\u003eM6 x 20 mm flange head bolts (10)\u003c\/div\u003e\n\u003cdiv\u003eSupport rails (2)\u003c\/div\u003e\n\u003cdiv\u003eVMP-SUC030 1\" to 3\/4\" Long floating transfer tubes for GT500 with stock water manifold\u003c\/div\u003e\n\u003cdiv\u003eVMP-SUC029 1\" to 3\/4\" short floating tubes for Coyote\/Raptor with stock water manifold\u003c\/div\u003e\n\u003cdiv\u003eMust purchase 1\" short or long floating transfer tubes when using with VMP water manifolds (SUC017 or SUC027)\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e13 cooling rows vs 12 stock\u003c\/div\u003e\n\u003cdiv\u003e1\" in\/out ports vs 3\/4\" stock\u003c\/div\u003e\n\u003cdiv\u003e123 mm wide vs 110 mm stock\u003c\/div\u003e\n\u003cdiv\u003e8% increase in airflow\u003c\/div\u003e\n\u003cdiv\u003e12% increase in core volume\u003c\/div\u003e\n\u003cdiv\u003e15% increase in water flow (with supporting mods)\u003c\/div\u003e\n\u003cdiv\u003e16 FPI lanced offset\u003c\/div\u003e\n\u003cdiv\u003eLD style core\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eApplications this intercooler will fit:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e07-12 Mustang Shelby GT500 5.4 L 4v supercharged\u003c\/div\u003e\n\u003cdiv\u003e13-14 Mustang Shelby GT500 5.8 L 4v supercharged\u003c\/div\u003e\n\u003cdiv\u003e08-10 Roush 4.6 L 3v supercharged (P51A, P51B, Roush Hammer 540RH, and 4.6 L 3v cars with the Roush R2300 kit )\u003c\/div\u003e\n\u003cdiv\u003e11-17 Mustang GT\/Roush\/F-150 5.0 L 4v supercharged\u003c\/div\u003e\n\u003cdiv\u003e11-14 Raptor 6.2 L with Roush supercharger Phase 1 (421246) or Phase 2 (421432)\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eUpgrade \/ Replacement for the following Part Numbers:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eM-6775-MSVT\u003c\/div\u003e\n\u003cdiv\u003eR07060144-13-AA\u003c\/div\u003e\n\u003cdiv\u003e7R3Z-6K775-AA (07-12)\u003c\/div\u003e\n\u003cdiv\u003eDR3Z-6K775-A (13-14)\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e286 mm core length\u003c\/div\u003e\n\u003cdiv\u003e118 mm core depth\u003c\/div\u003e\n\u003cdiv\u003e123 mm core height\u003c\/div\u003e\n\u003cdiv\u003e28.58 mm water in\/out\u003c\/div\u003e\n\u003cdiv\u003e***This intercooler will only fit the above OEM intakes from Ford\/Roush. The will NOT fit an aftermarket lower intake.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e***If you have the J2 Flow Mod on your 2007-2014 GT500, then you will need 2 of the VMP-SUC043.\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eThis intercooler is 50 State Legal. E.O. D-846-1\u003c\/strong\u003e\u003c\/div\u003e","brand":"VMP Tuning","offers":[{"title":"Default Title","offer_id":48143714287874,"sku":"VMP-SUC050","price":809.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/VMP-SUC050.jpg?v=1784996242"},{"product_id":"vmp-1-to-3-4-intercooler-floating-tube-reducer-increaser-long-direct-oem-replacement-vmp-suc030","title":"VMP 1\" to 3\/4\" Intercooler Floating Tube - Reducer\/Increaser - Long (Direct OEM Replacement) - VMP-SUC030","description":"\u003cp\u003e\u003cspan\u003e1\" to 3\/4\" Long Intercooler Floating Tube - Reducer\/Increaser - 4.6 L\/5.4 L\/5.8 L (1) - #115 O-ring - (1) #119 O-ring\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003e*PRODUCT IS QTY1, MUST PURCHASE TWO AT A TIME FOR MOST\/ALL APPLICATIONS*\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan\u003eOrder two of these to use a VMP Intercooler upgrade with the stock water manifold on your:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e'07-'14 Shelby GT500 with VMP-SUC050\u003c\/li\u003e\n\u003cli id=\"ext-element-25\"\u003e'03-'04 Cobra with VMP-SUC037\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eMay also be used with a stock intercooler core and VMP's high-flow water manifolds for the '07-'14 Shelby GT500 - VMP-SUC055 and VMP-SUC056.\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan\u003eCan be installed without removing the lower intake from the car.  \u003c\/span\u003e\u003c\/p\u003e","brand":"VMP Tuning","offers":[{"title":"Default Title","offer_id":48143714746626,"sku":"VMP-SUC030","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/VMP-SUC030.jpg?v=1784996243"},{"product_id":"vmp-apex-street-intercooler-lid-required-2020-shelby-gt500-5-2l-apx030","title":"VMP Apex Street Intercooler (Lid Required) (2020+ Shelby GT500 5.2L) - APX030","description":"The Apex Street Intercooler builds on VMP's extensive intercooler R\u0026amp;D on the 2020+ GT500 platform.  We designed this intercooler core specifically for VMP's Apex Predator Lid.  The over-arcing goal of VMP's lid and street core program was to be cost effective while controlling air temps and increasing horsepower.\u003cbr\u003e\u003cbr\u003e\n\nWith a 40% increase in thickness this core gives the air more time to cool down after exiting the supercharger discharge port.  Lower Intake Air temps allow for more spark timing and higher performance.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eFeatures:\u003cbr\u003e\u003c\/strong\u003e\nTakes advantage of the extra 1\" of volume inside the Apex lid\u003cbr\u003e\nS\/C discharge air has more contact time with core to remove heat\u003cbr\u003e\nHigh-Density core design for maximum cooling\u003cbr\u003e\n1\" water inlet \/ outlet\u003cbr\u003e\n1\" to 3\/4\" adapters included for stock water manifold or high-flow designs from VMP and others","brand":"VMP Tuning","offers":[{"title":"Default Title","offer_id":48145510301954,"sku":"VMP-APX030","price":989.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/VMP-APX030_01.jpg?v=1785004153"},{"product_id":"vmp-multi-pass-heat-exchanger-w-1-npt-fittings-vmp-mp10","title":"VMP Multi-Pass Heat Exchanger w\/ 1\" NPT Fittings - VMP-MP10","description":"\u003cdiv\u003e\n\u003cstrong\u003eVMP designed an even larger and custom configurable heat exchanger for the power-user!  Our customers wanted a thicker core and bigger fittings so we listened and are now offering the VMP-MP10.\u003c\/strong\u003e  \u003c\/div\u003e\n\u003cdiv\u003e Double row design with 50% more capacity than VMP Triple Pass\u003c\/div\u003e\n\u003cdiv\u003e3\" thick header x 13\" tall x 24.5\" wide \u003c\/div\u003e\n\u003cdiv\u003eMounting brackets for optional dual Spal 11\" fans\u003c\/div\u003e\n\u003cdiv\u003e1\" NPT inlet and outlets\u003c\/div\u003e\n\u003cdiv\u003eOption to \"flip\" the heat exchanger for upper grill mounting in leu of traditional lower grill mounting\u003c\/div\u003e\n\u003cdiv\u003eUser-configurable single or dual pass design with provided ports and fittings (two NPT ports on one side and one NPT port on the other side)\u003c\/div\u003e\n\u003cdiv\u003eSupports over 30 GPM of intercooler system flow in single pass configuration\u003c\/div\u003e\n\u003cdiv\u003eThe \"MP\" in the part number designates our multi-pass design.  We developed the heat exchanger this way so the end user may configure it for their individual setup.  In some situations it is better to take multiple cooling passes through the heat exchanger, but with the latest high-flow pumps these multiple passes may become a restriction.  When all-out flow is required the HE may be run as a single pass.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe \"10\" in the part number stands for 1.0\" inlet and outlet ports.  One side of the heat exchanger has dual 1\" NPT ports, allowing you to more easily plumb the latest supercharger systems such as the VMP Odin with its two intercooler cores.  When you need to run the heat exchanger in single pass one side is plugged and the other side is used as the inlet and outlet (see diagrams in product imagery).\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eVMP's original triple pass heat exchanger design is a great upgrade to get additional cooling from factory systems with their small low-flowing pumps.  The new Mult-pass design is intended for those looking for the ultimate cooling solution with upgraded pumps and lines.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eFitting kits are available separately to configure this heat exchange for single pass, dual pass, 3\/4\" lines, and 1\" lines.  \u003c\/div\u003e","brand":"VMP Tuning","offers":[{"title":"Default Title","offer_id":48146425970946,"sku":"VMP-MP10","price":539.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/VMP-MP10_01.jpg?v=1785007845"},{"product_id":"vmp-by-pwr-apex-race-intercooler-lid-required-2020-shelby-gt500-5-2l-apx031","title":"VMP by PWR Apex Race Intercooler (Lid Required) (2020+ Shelby GT500 5.2L) - APX031","description":"The ultimate in cooling for your 2020+ GT500 and 2023+ Raptor R with the 5.2 L engine.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003e**VMP APEX PREDATOR LID REQUIRED**\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\n\nVMP designed a larger intercooler lid to solve the cooling problems with the factory blower once and for all.  This larger lid allows for bigger intercooler bricks and more airflow.  \u003cbr\u003e\u003cbr\u003e\n\nThe VMP by PWR '20+ GT500 5.2 L Apex Race Intercooler is the culmination of two years of intercooler design and testing.  \u003cbr\u003e\u003cbr\u003e\n\nWe recommend the race core for cars making over 900 rearwheel horsepower.  Below 900 the less expensive street core may be used.\u003cbr\u003e\u003cbr\u003e\n\nThicker is not always better, the race core is built slightly thinner than the street core for optimal placement from the SC discharge to the core, and the core to the lid.  PWR's proprietary bar and plate design transfers heat so well the extra thickness is not necessary.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eRace core benefits:\u003cbr\u003e\u003c\/strong\u003e\n28 FPI design for maximum heat removal\u003cbr\u003e\n160 mm wide (stackup) for maximum air-flow vs 146 mm width of the 81 mm Race Core\u003cbr\u003e\n1\" water inlet \/ outlet\u003cbr\u003e\n1\" to 3\/4\" adapters included for stock water manifold or high-flow designs from VMP and others\u003cbr\u003e\nOptimal placement from SC discharge port to core and core to lid","brand":"VMP Tuning","offers":[{"title":"Default Title","offer_id":48146440978690,"sku":"VMP-APX031","price":1619.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/VMP-APX031_01.jpg?v=1785007875"},{"product_id":"vmp-11-fan-for-heat-exchanger-11inchfan","title":"VMP 11\" Fan for Heat Exchanger - 11INCHFAN","description":"VMP 11\" Fan for Heat Exchanger - 11INCHFAN\u003cbr\u003e\u003cbr\u003eVMP offers the 11\" Fans for the Non-Fanned Triple Pass Heat exchangers. These can also be used on other applications.\u003cbr\u003e\u003cbr\u003eWILL ADDING A SUPERCHARGER TO MY GT OR UPGRADING MY FACTORY SUPERCHARGER ON MY COBRA, ROUSH, OR GT500 WITH A VMP TVS SUPERCHARGER RUIN MY DRIVABILITY OR ON ROAD MANNERS? Nope. Notice, we said upgrade! With our expert tuning staff and the hours of R\u0026amp;amp\u003cbr\u003eD that have gone into all of our kits, we have painstakingly developed kits that help you achieve your power goals without losing drivability and the road manners you are accustomed to in the modern Mustang, GT500, and F-150.\u003cbr\u003e\u003cbr\u003eVMP operates a modern e-commerce business focused on aftermarket automotive upgrades with customers all over the world. The company?s headquarters are in New Smyrna Beach Florida on a 12 acre campus. VMP offers custom tuning and installations in addition to the line of VMP performance parts and supporting components from quality manufacturers.\u003cbr\u003e\u003cbr\u003e","brand":"VMP Tuning","offers":[{"title":"Default Title","offer_id":48146755453186,"sku":"VMP-11INCHFAN","price":62.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/VMP-11INCHFAN.1_1.jpg?v=1785009162"},{"product_id":"vmp-11-17-coyote-high-flow-3-4-hose-intercooler-tube-kit-2011-2017-mustang-scc014","title":"VMP 11-'17 Coyote High-Flow 3\/4\" Hose Intercooler Tube Kit (2011-2017 Mustang) - SCC014","description":"VMP 11-'17 Coyote High-Flow 3\/4\" Hose Intercooler Tube Kit (2011-2017 Mustang) - SCC014\u003cbr\u003e\u003cbr\u003eVMP '11-'17 Coyote High-Flow 3\/4\" Hose Intercooler Tube Kit for VMP\/Roush lower intake manifold. This kit includes a set of high flow 3\/4\" fittings that bolt onto the outside of the lower intake. They have an 65 degree angle to connect to stock 3\/4\" ID rubber hose. Internal floating water transfer tubes are NOT included. To use with stock Roush intercooler: VMP-SUC0291\" to 3\/4\" short intercooler floating transfer tube reducer\/increaser for 5.0 L VMP\/RoushTo use with VMP intercooler upgrade SUC050: VMP-SUC0171\" short intercooler floating transfer tube for 5.0 L VMP\/Roush.\u003cbr\u003e\u003cbr\u003eWILL ADDING A SUPERCHARGER TO MY GT OR UPGRADING MY FACTORY SUPERCHARGER ON MY COBRA, ROUSH, OR GT500 WITH A VMP TVS SUPERCHARGER RUIN MY DRIVABILITY OR ON ROAD MANNERS? Nope. Notice, we said upgrade! With our expert tuning staff and the hours of R\u0026amp;amp\u003cbr\u003eD that have gone into all of our kits, we have painstakingly developed kits that help you achieve your power goals without losing drivability and the road manners you are accustomed to in the modern Mustang, GT500, and F-150.\u003cbr\u003e\u003cbr\u003eVMP operates a modern e-commerce business focused on aftermarket automotive upgrades with customers all over the world. The company?s headquarters are in New Smyrna Beach Florida on a 12 acre campus. VMP offers custom tuning and installations in addition to the line of VMP performance parts and supporting components from quality manufacturers.\u003cbr\u003e\u003cbr\u003e","brand":"VMP Tuning","offers":[{"title":"Default Title","offer_id":48146759221506,"sku":"VMP-SCC014","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/VMP-SCC014_01_1.jpg?v=1785009183"},{"product_id":"vmp-suc021-dual-fan-triple-pass-heat-exchanger-2005-2014-mustang","title":"VMP SUC021 Dual Fan Triple Pass Heat Exchanger (2005-2014 Mustang)","description":"Introducing The New VMP TRIPLE Pass-Dual Fan Heat Exchanger. Three times the cooling exposure and an even BIGGER pair of 11 inch fans to help you maintain maximum performance!\u003cbr\u003eFor 2005-2014 Mustang\u003cbr\u003e\u003cbr\u003eAll new! The VMP Heat Exchanger incorporates dual 11\" fans and a 13\" tall core, the largest in the industry. Plus, TRIPLE PASS TECHNOLOGY! This is the ultimate cooling solution at the most affordable price.We developed this heat exchanger to deal with the rigors of driving our VMP TVS Supercharged Boss 302 Mustang on the road course. Through track and dyno testing we have found that our heat-exchanger keeps temps low enough to maintaining consistent power output even during a 20 minute high-speed on-track session on a brutal 90F Florida day. We stuffed the largest core possible under the stock bumper. Dual-fans help keep air moving over the core at low speeds, stoplights, and in the staging lanes. Fans are an essential part of making a larger heat exchanger work. Three passes of the water through this huge core lowers temperatures as much as possible. \u003cbr\u003e\u003cbr\u003eYour supercharged 5.0L will perform much better with cooler intake temps, this is especially critical on the high compression Coyote and Roadrunner 5.0L engines when running 10psi or more of boost.\u003cbr\u003e\u003cbr\u003eLower intake temps allow for more timing and more power, the dual fan design keeps air moving at all times for the lowest possible temperature in any situation.\u003cbr\u003e\u003cbr\u003eHeat exchanger is 13.25\" tall, 28\" wide, and 2\" thick. Measurements do not include fans, mounting brackets or inlet\/outlet.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003eVMP Heat exchanger with twin 11\" Spal fans\u003cbr\u003eSealed Dual Relay\/Sealed Dual Fuse wiring harness - Plug and Play for your application\u003cbr\u003eMouting hardware for heat exchanger\u003cbr\u003eMounting bracket for intercooler pump (excluding 13-14 GT500)\u003cbr\u003eNOTE: 4.6L '05-'10 GT USES 07-12 GT500 DUAL RELAY HARNESS\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures of the VMP Heat Exchanger:\u003c\/strong\u003e\u003cbr\u003eWorks with Whipple, Kenne Bell, Roush, Magnuson, Edelbrock superchargers\u003cbr\u003eWorks with air-water intercoolers on Vortech centrifugal superchargers\u003cbr\u003eHigh efficient triple pass design cools the water three times for lower temps vs. OEM single pass\u003cbr\u003eIncreased HP due to intake temperature drop compared to stock\u003cbr\u003ePlug and play harness connects inline with the intercooler pump circuit to trigger fan relays\u003cbr\u003eDrop in intake temp at wide open throttle due to the improved capacity\u003cbr\u003eCool-down in the staging lanes possible by running fans and pump\u003cbr\u003eQuicker cool down in between runs at the track\u003cbr\u003eHelps prevent heat soak and detonation due to increased intake temps\u003cbr\u003eMoves the intercooler pump out of the grill for improved airflow\u003cbr\u003eSimple do-it-yourself bolt on installation\u003cbr\u003eIncreases coolant capacity\u003cbr\u003eFurnace brazed core (no epoxies) with beautifully tig welded tank construction\u003cbr\u003eDual 11\" fans provide the ultimate in airflow at all vehicle speeds\u003cbr\u003eEach unit is pressure-tested before it is shipped.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003cbr\u003e11-12 5.0L require trimming of the lower bumper valance to make room for this huge heat exchanger.\u003cbr\u003e\u003cbr\u003e*For all models (except 13-14 GT500) the intercooler pump is mounted below the drivers side headlight with the supplied \"Z bracket\"","brand":"VMP Tuning","offers":[{"title":"Default Title","offer_id":48150150086914,"sku":"VMP-SUC021","price":809.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/VMP-SUC021.VMP-HeatExchangerKit-05-14-Mustang.1.jpg?v=1785025511"},{"product_id":"vmp-dual-fan-triple-pass-heat-exchanger-2015-2023-mustangs-suc022","title":"VMP Dual Fan Triple Pass Heat Exchanger (2015-2023 Mustangs) - SUC022","description":"\u003cp\u003eIntroducing The New VMP TRIPLE Pass-Dual Fan Heat Exchanger. Three times the cooling exposure and an even BIGGER pair of 11 inch fans to help you maintain maximum performance! For 2015+ Mustang\u003cbr\u003e\u003cbr\u003eAll new! The VMP Heat Exchanger incorporates dual 11\" fans and a 13\" tall core, the largest in the industry. Plus, TRIPLE PASS TECHNOLOGY! This is the ultimate cooling solution at the most affordable price.We developed this heat exchanger to deal with the rigors of driving our VMP TVS Supercharged Boss 302 Mustang on the road course. Through track and dyno testing we have found that our heat-exchanger keeps temps low enough to maintaining consistent power output even during a 20 minute high-speed on-track session on a brutal 90F Florida day. We stuffed the largest core possible under the stock bumper. Dual-fans help keep air moving over the core at low speeds, stoplights, and in the staging lanes. Fans are an essential part of making a larger heat exchanger work. Three passes of the water through this huge core lowers temperatures as much as possible. \u003cbr\u003e\u003cbr\u003eYour supercharged 5.0L will perform much better with cooler intake temps, this is especially critical on the high compression Coyote and Roadrunner 5.0L engines when running 10psi or more of boost.\u003cbr\u003e\u003cbr\u003eLower intake temps allow for more timing and more power, the dual fan design keeps air moving at all times for the lowest possible temperature in any situation.\u003cbr\u003e\u003cbr\u003eHeat exchanger is 13.25\" tall, 28\" wide, and 2\" thick. Measurements do not include fans, mounting brackets or inlet\/outlet.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003eVMP Heat exchanger with twin 11\" Spal fans\u003cbr\u003eSealed Dual Relay\/Sealed Dual Fuse wiring harness - Plug and Play for your application (select when ordering)\u003cbr\u003eMouting hardware for heat exchanger\u003cbr\u003eMounting bracket for intercooler pump (excluding 13-14 GT500)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures of the VMP Heat Exchanger:\u003c\/strong\u003e\u003cbr\u003eWorks with Whipple, Kenne Bell, Roush, Magnuson, Edelbrock superchargers\u003cbr\u003eWorks with air-water intercoolers on Vortech centrifugal superchargers\u003cbr\u003eHigh efficient triple pass design cools the water three times for lower temps vs. OEM single pass\u003cbr\u003eIncreased HP due to intake temperature drop compared to stock\u003cbr\u003ePlug and play harness connects inline with the intercooler pump circuit to trigger fan relays\u003cbr\u003eDrop in intake temp at wide open throttle due to the improved capacity\u003cbr\u003eCool-down in the staging lanes possible by running fans and pump\u003cbr\u003eQuicker cool down in between runs at the track\u003cbr\u003eHelps prevent heat soak and detonation due to increased intake temps\u003cbr\u003eMoves the intercooler pump out of the grill for improved airflow\u003cbr\u003eSimple do-it-yourself bolt on installation\u003cbr\u003eIncreases coolant capacity\u003cbr\u003eFurnace brazed core (no epoxies) with beautifully tig welded tank construction\u003cbr\u003eDual 11\" fans provide the ultimate in airflow at all vehicle speeds\u003cbr\u003eEach unit is pressure-tested before it is shipped.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003cbr\u003e13-18 5.0L the VMP HE is a direct drop in due to this bumper being much larger like the GT500\u003cbr\u003e\u003cbr\u003e*In 2014 the VMP HE became a triple pass design, water goes in the driver side, and out the passenger side, Afco and older VMP models were a double pass design and thus had a different hose routing.\u003cbr\u003e*For all models (except 13-14 GT500) the intercooler pump is mounted below the drivers side headlight with the supplied \"Z bracket\"\u003c\/p\u003e","brand":"VMP Tuning","offers":[{"title":"Default Title","offer_id":48150150185218,"sku":"VMP-SUC022","price":809.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/VMP-SUC022.VMP-HeatExchangerKit-15-Mustang.1.jpg?v=1785025511"},{"product_id":"vmp-suc020-dual-fan-triple-pass-heat-exchanger-2013-2014-shelby-gt500","title":"VMP SUC020 Dual Fan Triple Pass Heat Exchanger (2013-2014 Shelby GT500)","description":"Introducing The New VMP TRIPLE Pass-Dual Fan Heat Exchanger. Three times the cooling exposure and an even BIGGER pair of 11 inch fans to help you maintain maximum performance!\u003cbr\u003eFor 13-14 GT500\u003cbr\u003e\u003cbr\u003eNOTE: 3X tank does NOT fit 2013-14 GT500\u003cbr\u003e\u003cbr\u003eAll new! The VMP Heat Exchanger incorporates dual 11\" fans and a 13\" tall core, the largest in the industry. Plus, TRIPLE PASS TECHNOLOGY! This is the ultimate cooling solution at the most affordable price.We developed this heat exchanger to deal with the rigors of driving our VMP TVS Supercharged Boss 302 Mustang on the road course. Through track and dyno testing we have found that our heat-exchanger keeps temps low enough to maintaining consistent power output even during a 20 minute high-speed on-track session on a brutal 90F Florida day. We stuffed the largest core possible under the stock bumper. Dual-fans help keep air moving over the core at low speeds, stoplights, and in the staging lanes. Fans are an essential part of making a larger heat exchanger work. Three passes of the water through this huge core lowers temperatures as much as possible. \u003cbr\u003e\u003cbr\u003eThe 2013-2014 GT500 features the best cooling system to ever come from the factory in a Shelby, but lacks fans for low speed cooling on the street and strip. In a drag race situation where you are sitting in the staging lanes between runs the intercooler fluid just becomes more and more heat soaked. By running the pump and fans between runs you can easily see .2-.3 drop in ET. Our triple pass design also provides lower IATs than the OE unit.\u003cbr\u003e\u003cbr\u003eLower intake temps allow for more timing and more power, the dual fan design keeps air moving at all times for the lowest possible temperature in any situation.\u003cbr\u003e\u003cbr\u003eHeat exchanger is 13.25\" tall, 28\" wide, and 2\" thick. Measurements do not include fans, mounting brackets or inlet\/outlet.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003eVMP Heat exchanger with twin 11\" Spal fans\u003cbr\u003eSealed Dual Relay\/Sealed Dual Fuse wiring harness - Plug and Play for your application (select when ordering)\u003cbr\u003eMouting hardware for heat exchanger\u003cbr\u003eMounting bracket for intercooler pump (excluding 13-14 GT500)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures of the VMP Heat Exchanger:\u003c\/strong\u003e\u003cbr\u003eWorks with Whipple, Kenne Bell, Roush, Magnuson, Edelbrock superchargers\u003cbr\u003eWorks with air-water intercoolers on Vortech centrifugal superchargers\u003cbr\u003eHigh efficient triple pass design cools the water three times for lower temps vs. OEM single pass\u003cbr\u003eIncreased HP due to intake temperature drop compared to stock\u003cbr\u003ePlug and play harness connects inline with the intercooler pump circuit to trigger fan relays\u003cbr\u003eDrop in intake temp at wide open throttle due to the improved capacity\u003cbr\u003eCool-down in the staging lanes possible by running fans and pump\u003cbr\u003eQuicker cool down in between runs at the track\u003cbr\u003eHelps prevent heat soak and detonation due to increased intake temps\u003cbr\u003eMoves the intercooler pump out of the grill for improved airflow\u003cbr\u003eSimple do-it-yourself bolt on installation\u003cbr\u003eIncreases coolant capacity\u003cbr\u003eFurnace brazed core (no epoxies) with beautifully tig welded tank construction\u003cbr\u003eDual 11\" fans provide the ultimate in airflow at all vehicle speeds\u003cbr\u003eEach unit is pressure-tested before it is shipped.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003cbr\u003e13-14 GT500 the VMP HE is a direct drop in on regular and track-pak cars, minor trimming of the plastic shields above the HE is required.\u003cbr\u003e\u003cbr\u003e*In 2014 the VMP HE became a triple pass design, water goes in the driver side, and out the passenger side, Afco and older VMP models were a double pass design and thus had a different hose routing.\u003cbr\u003e\u003cbr\u003e","brand":"VMP Tuning","offers":[{"title":"Default Title","offer_id":48150150217986,"sku":"VMP-SUC020","price":809.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/VMP-SUC020.VMP-HeatExchangerKit-13-14-GT500.1.jpg?v=1785025508"},{"product_id":"vmp-suc023-dual-fan-triple-pass-heat-exchanger-2011-2014-ford-f150-5-0l","title":"VMP SUC023 Dual Fan Triple Pass Heat Exchanger (2011-2014 Ford F150 5.0L)","description":"Introducing The New VMP TRIPLE Pass-Dual Fan Heat Exchanger. Three times the cooling exposure and an even BIGGER pair of 11 inch fans to help you maintain maximum performance!\u003cbr\u003eFits on 11-14 F-150 Supercharged Coyote\u003cbr\u003e\u003cbr\u003eIncludes mounting brackets\u003cbr\u003e\u003cbr\u003eAll new! The VMP Heat Exchanger incorporates dual 11\" fans and a 13\" tall core, the largest in the industry. Plus, TRIPLE PASS TECHNOLOGY! This is the ultimate cooling solution at the most affordable price.We developed this heat exchanger to deal with the rigors of driving our VMP TVS Supercharged Boss 302 Mustang on the road course. Through track and dyno testing we have found that our heat-exchanger keeps temps low enough to maintaining consistent power output even during a 20 minute high-speed on-track session on a brutal 90F Florida day. We stuffed the largest core possible under the stock bumper. Dual-fans help keep air moving over the core at low speeds, stoplights, and in the staging lanes. Fans are an essential part of making a larger heat exchanger work. Three passes of the water through this huge core lowers temperatures as much as possible. \u003cbr\u003e\u003cbr\u003eWhen increasing boost above 15psi on your Supercharged F-150 this is an essential upgrade. \u003cbr\u003e\u003cbr\u003eYour supercharged 5.0L will perform much better with cooler intake temps, this is especially critical on the high compression Coyote and Roadrunner 5.0L engines when running 10psi or more of boost.\u003cbr\u003e\u003cbr\u003eLower intake temps allow for more timing and more power, the dual fan design keeps air moving at all times for the lowest possible temperature in any situation.\u003cbr\u003e\u003cbr\u003eWe decided to move the intercooler pump out of the grill to get more airflow to the radiator. Intercooler pump mounting bracket included.\u003cbr\u003e\u003cbr\u003eHeat exchanger is 13.25\" tall, 28\" wide, and 2\" thick. Measurements do not include fans, mounting brackets or inlet\/outlet.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003eVMP Heat exchanger with twin 11\" Spal fans\u003cbr\u003eSealed Dual Relay\/Sealed Dual Fuse wiring harness - Plug and Play for your application (select when ordering)\u003cbr\u003eMouting hardware for heat exchanger\u003cbr\u003eMounting bracket for intercooler pump \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures of the VMP Heat Exchanger:\u003c\/strong\u003e\u003cbr\u003eFits 2011-2014 Supercharged Coyote F-150\u003cbr\u003eStandard on the VMP TVS Stage 2 for the 5.0L F-150\u003cbr\u003eWorks with Whipple, Kenne Bell, Roush, Magnuson, Edelbrock superchargers\u003cbr\u003eWorks with air-water intercoolers on Vortech centrifugal superchargers\u003cbr\u003eHigh efficient triple pass design cools the water three times for lower temps vs. OEM single pass\u003cbr\u003eIncreased HP due to intake temperature drop compared to stock\u003cbr\u003ePlug and play harness connects inline with the intercooler pump circuit to trigger fan relays\u003cbr\u003eDrop in intake temp at wide open throttle due to the improved capacity\u003cbr\u003eCool-down in the staging lanes possible by running fans and pump\u003cbr\u003eQuicker cool down in between runs at the track\u003cbr\u003eHelps prevent heat soak and detonation due to increased intake temps\u003cbr\u003eMoves the intercooler pump out of the grill for improved airflow\u003cbr\u003eSimple do-it-yourself bolt on installation\u003cbr\u003eIncreases coolant capacity\u003cbr\u003eFurnace brazed core (no epoxies) with beautifully tig welded tank construction\u003cbr\u003eDual 11\" fans provide the ultimate in airflow at all vehicle speeds\u003cbr\u003eEach unit is pressure-tested before it is shipped.\u003cbr\u003e\u003cbr\u003e*In 2014 the VMP HE became a triple pass design, water goes in the driver side, and out the passenger side, Afco and older VMP models were a double pass design and thus had a different hose routing.\u003cbr\u003e*For all models (except 13-14 GT500) the intercooler pump is mounted below the drivers side headlight with the supplied \"Z bracket\"\u003cbr\u003e","brand":"VMP Tuning","offers":[{"title":"Default Title","offer_id":48150150283522,"sku":"VMP-SUC023","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/VMP-SUC023.VMP-HeatExchangerKit-11-14-F150.1.jpg?v=1785025510"},{"product_id":"vmp-suc019-dual-fan-triple-pass-heat-exchanger-2007-2012-shelby-gt500","title":"VMP SUC019 Dual Fan Triple Pass Heat Exchanger (2007-2012 Shelby GT500)","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this heat exchanger is now only available in Black.\u003c\/strong\u003e\u003c\/p\u003e\u003cbr\u003eIntroducing The New VMP TRIPLE Pass-Dual Fan Heat Exchanger. Three times the cooling exposure and an even BIGGER pair of 11 inch fans to help you maintain maximum performance!\u003cbr\u003eFor 07-14 Shelby GT500\u003cbr\u003e\u003cbr\u003eAll new! The VMP Heat Exchanger incorporates dual 11\" fans and a 13\" tall core, the largest in the industry. Plus, TRIPLE PASS TECHNOLOGY! This is the ultimate cooling solution at the most affordable price.We developed this heat exchanger to deal with the rigors of driving our VMP TVS Supercharged Boss 302 Mustang on the road course. Through track and dyno testing we have found that our heat-exchanger keeps temps low enough to maintaining consistent power output even during a 20 minute high-speed on-track session on a brutal 90F Florida day. We stuffed the largest core possible under the stock bumper. Dual-fans help keep air moving over the core at low speeds, stoplights, and in the staging lanes. Fans are an essential part of making a larger heat exchanger work. Three passes of the water through this huge core lowers temperatures as much as possible. \u003cbr\u003e\u003cbr\u003eWhen increasing boost above 15psi on your 07-12 GT500 this is an essential upgrade. \u003cbr\u003e\u003cbr\u003eLower intake temps allow for more timing and more power, the dual fan design keeps air moving at all times for the lowest possible temperature in any situation.\u003cbr\u003e\u003cbr\u003eWe decided to move the intercooler pump out of the grill to get more airflow to the radiator. Intercooler pump mounting bracket included.\u003cbr\u003e\u003cbr\u003eHeat exchanger is 13.25\" tall, 28\" wide, and 2\" thick. Measurements do not include fans, mounting brackets or inlet\/outlet.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003eVMP Heat exchanger with twin 11\" Spal fans\u003cbr\u003eSealed Dual Relay\/Sealed Dual Fuse wiring harness - Plug and Play for your application\u003cbr\u003eMouting hardware for heat exchanger\u003cbr\u003eMounting bracket for intercooler pump \u003cbr\u003eNOTE: 4.6L '05-'10 GT USES 07-12 GT500 DUAL RELAY HARNESS\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures of the VMP Heat Exchanger:\u003c\/strong\u003e\u003cbr\u003eFits 2007-2014 Shelby GT500\u003cbr\u003eFits 2011-2018 Mustang GT 5.0L with positive-displacement supercharger\u003cbr\u003eFits 2005-2010 Mustang GT 4.6L with positive-displacement supercharger\u003cbr\u003eStandard on the VMP TVS Stage 2 for the 5.0L Mustang\u003cbr\u003eWorks with Whipple, Kenne Bell, Roush, Magnuson, Edelbrock superchargers\u003cbr\u003eWorks with air-water intercoolers on Vortech centrifugal superchargers\u003cbr\u003eHigh efficient triple pass design cools the water three times for lower temps vs. OEM single pass\u003cbr\u003eIncreased HP due to intake temperature drop compared to stock\u003cbr\u003ePlug and play harness connects inline with the intercooler pump circuit to trigger fan relays\u003cbr\u003eDrop in intake temp at wide open throttle due to the improved capacity\u003cbr\u003eCool-down in the staging lanes possible by running fans and pump\u003cbr\u003eQuicker cool down in between runs at the track\u003cbr\u003eHelps prevent heat soak and detonation due to increased intake temps\u003cbr\u003eMoves the intercooler pump out of the grill for improved airflow\u003cbr\u003eSimple do-it-yourself bolt on installation\u003cbr\u003eIncreases coolant capacity\u003cbr\u003eStock 07-10 GT500 holds 1 gallon, our HE and 3x reservoir nearly doubles this\u003cbr\u003eFurnace brazed core (no epoxies) with beautifully tig welded tank construction\u003cbr\u003eDual 11\" fans provide the ultimate in airflow at all vehicle speeds\u003cbr\u003eEach unit is pressure-tested before it is shipped.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003cbr\u003e07-09 GT500: the radiator side shields should be pushed to the side. We recommend flipping the \"wings\" around and clipping them to the inside of the bumper cover to help airflow into the heat exchanger. The power steering cooler is a tight fit but will sit behind the fans of the HE.\u003cbr\u003e2010 GT500: this year only has a larger finned power steering cooler, it should be pushed out of the way and mounted above the HE.\u003cbr\u003e11-12 GT500 the VMP HE is a direct drop in, no power steering cooler to get in the way on 11+\u003cbr\u003e\u003cbr\u003e*For all models (except 13-14 GT500) the intercooler pump is mounted below the drivers side headlight with the supplied \"Z bracket\"\u003cbr\u003e\u003cbr\u003eFLUID NOTE: STOCK 07-12 GT500s hold 4.0qt of fluid. Add 2qt for VMP 3x tank. Add approx 1.5qt for VMP Triple Pass. If you're replacing all the fluid, you should have 8qts available. You may not use it all, but it will be close.","brand":"VMP Tuning","offers":[{"title":"Default Title","offer_id":48150150381826,"sku":"VMP-SUC019","price":809.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/VMP-SUC019.Heat-ExchangerKit-07-12-GT500.1.jpg?v=1785025510"},{"product_id":"vmp-by-pwr-intercooler-upgrade-2003-2004-cobra-terminator-vmp-suc037","title":"VMP by PWR Intercooler Upgrade (2003-2004 Cobra Terminator) - VMP-SUC037","description":"\u003cp\u003eVMP by PWR 03-04 Cobra \"Terminator\" intercooler core upgrade\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement with stock-sized flow tubes (PN: VMP-SUC030)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTransition flow tubes available for other brand 1\" lines (PN: VMP-SUC043)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBar and plate style for efficiency and durability\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e87mm thick core for the best cooling performance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e13% or 12mm wider than stock (maximum width allowed by mounting bolt pattern)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreased flow area reduces pressure drop and improves cooling\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e25% decrease in peak downstream air temps during a WOT pull or 1\/4mi pass\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eImproved tube design compared to stock\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMore efficient air-side fine design compared to stock\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLow water-side restriction allows high performance pumps (EMP, etc) to see a drastic increase in flow over the restrictive stock core.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e50 State Legal E.O # D-846-1\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003eIncludes: 10x black allen head M5 x .8 x 16mm bolts and loctite for mounting the intercooler core.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eAfter extensive field testing its here! Finally an 03-04 Cobra intercooler upgrade that performs.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe VMP by PWR core is designed to be an upgrade for Cobras at all power and boost levels.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe core is designed to work with the stock water manifold using the optional transition tubes (see related items), or can be used with \"flow mods\" currently on the market.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eHigher flowing pumps will help, but are not required for this core to work. Minimum water flow rate 4.5 GPM (OEM Bosch pump).\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eCobra Engineering water manifold will is be available for this core with 1\" in\/out fittings. (VMP-SUC061)\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e***Flow Tubes MUST be purchased to make this intercooler work in your car unless you are using the VMP-SUC061. See related items below to identify the flow tubes needed.\u003c\/div\u003e\n\u003c\/div\u003e","brand":"VMP Tuning","offers":[{"title":"Default Title","offer_id":48150388080898,"sku":"VMP-SUC037","price":1619.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/VMP-SUC037.jpg?v=1785026865"},{"product_id":"vmp-by-pwr-103mm-high-boost-race-intercooler-core-2003-2004-cobra-terminator-vmp-suc039","title":"VMP by PWR 103mm High-Boost Race Intercooler Core (2003-2004 Cobra Terminator) - VMP-SUC039","description":"\u003cdiv\u003eVMP by PWR 103 mm High-Boost Race Intercooler core '03-'04 Cobra Terminator\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThis part is a continuation of our intercooler core development for the '03-04 Cobra “Terminator”.  Through extensive testing on some of the fastest Cobras in the world, we have found a benefit to increasing air side fin size from 4.85mm to 7mm.  The downside of more air-flow area is less water channels.  The thicker design of this core compensates for that somewhat, however, we only recommend this core in race applications.  Race setups should have high flow pumps installed, minimum 12 GPM water flow.  See our ice tank and CMAX pump combo VMP-ICE300.  \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eStreet application should continue to use the higher-density VMP-SUC037 87 mm race core.  The additional cooling this core provides ensures the most possible timing on pump fuels.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eUses the same water manifold as the 87 mm core VMP-SUC037.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eBar and plate style for efficiency and durability\u003c\/div\u003e\n\u003cdiv\u003e103 mm thick core for the best cooling performance\u003c\/div\u003e\n\u003cdiv\u003e7mm air side fin\u003c\/div\u003e\n\u003cdiv\u003eRecommended for 900 rwhp and above to reduce pressure drop across the core\u003c\/div\u003e\n\u003cdiv\u003e13% or 12mm wider than stock (maximum width allowed by mounting bolt pattern)\u003c\/div\u003e\n\u003cdiv\u003eIncreased flow area reduces pressure drop and improves cooling\u003c\/div\u003e\n\u003cdiv\u003e25% decrease in peak downstream air temps during a WOT pull or 1\/4mi pass\u003c\/div\u003e\n\u003cdiv\u003eImproved tube design compared to stock\u003c\/div\u003e\n\u003cdiv\u003eMore efficient air-side fine design compared to stock\u003c\/div\u003e\n\u003cdiv\u003eLow water-side restriction allows high performance pumps (EMP, etc) to see a drastic increase in flow over the restrictive stock core.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eIncludes: \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eIntercooler support rails\u003c\/div\u003e\n\u003cdiv\u003e10x black allen head M5 x .8 x 16mm bolts and loctite for mounting the intercooler core.\u003c\/div\u003e","brand":"VMP Tuning","offers":[{"title":"Default Title","offer_id":48150666608898,"sku":"VMP-SUC039","price":1619.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/vmp-suc039.1.jpg?v=1785028492"}],"url":"https:\/\/www.lethalperformance.com\/collections\/vmp-cooling-heat-exchangers.oembed","provider":"Lethal Performance","version":"1.0","type":"link"}