{"title":"Steeda Short Throw Shifters","description":null,"products":[{"product_id":"steeda-mt-82-tri-ax-race-short-throw-shifter-2015-2026-mustang-gt-555-7317","title":"Steeda MT-82 Tri-Ax Race Short Throw Shifter (2015-2026 Mustang GT) - 555-7317","description":"\u003cp\u003eSteeda S550 \/ S650 Mustang MT-82 Tri-Ax Race Short Throw Shifter (15-24 GT) - 555-7317\u003cbr\u003e\n\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSteeda's S550 \/ S650 Mustang GT MT-82 Tri-Ax Race Short Throw Shifter is a full factory shifter assembly replacement for your 2015+ Mustang GT. Our race short throw shifter eliminates all slop and deflection of the factory shifter, and still retains the factory shift knob, pull-up style reverse lockout and backup camera functionality.\u003c\/p\u003e\n\u003cp\u003eWith the replacement of your factory shifter assembly with our short throw shifter, you will notice a 30% reduction in throw between gears. Our shifter assembly will also lower the shift knob by 1\", putting it in a better 'power' shifting position. Our Steeda S550 Mustang MT-82 Tri-Ax Race Short Throw Shifter is quieter than the stock shifter during daily driving, although during race applications you may notice a slight NVH increase.\u003c\/p\u003e\n\u003cp\u003eOne of the great benefits to this shifter assembly is that it's completely top-loaded. Our short throw shifter for your 2015+ Mustang GT comes with 2 different spring set options for a fully adjustable shifting experience. The kit comes complete with 2 medium-resistance springs and 2 high-resistance springs. The Steeda Tri-Ax has adjustable return springs to fit every drivers' preference on shifter feel. Using an offset spring tension ensures that you hit your 2nd-3rd gear change every time. Since our S550 MT-82 short shifter is top-loaded, once the base plate is mounted, you can change all of your springs, levers and other options all from inside the car without taking out the full shifter assembly!\u003c\/p\u003e\n\u003cp\u003eOur Tri-Ax shifter features rigid mounting in the front and Steeda poly bushing in the rear, virtually eliminating slop and shifter deflection. With less deflection you will feel a much more direct gear change. The assembly is transmission and chassis-mounted so you don't get the 'walking' affect of a fully transmission-mounted assembly, all while still gaining a more rigid shifter feel. Factory shift shaft bushings are replaced with wider, high-quality machine-finished, low-friction bushings. Tolerances are controlled up to a half thousandth of an inch to ensure OE-quality fitment, alignment and shaft actuation. These features alone make our Steeda Tri-Ax one of the most positive feeling shifters on the market today. To top it all off, our Steeda Mustang GT shifter assembly includes Dynamat sound-deadening material to close out your transmission tunnel and ensures your S550 stays as quiet as the stock assembly.\u003c\/p\u003e\n\u003cp\u003eSteeda's S550 Mustang MT-82 Tri-Ax Race Short Throw Shifter is manufactured from high-quality aircraft-grade aluminum making it 20% lighter than the competitions' shifter assemblies. The shift lever itself on our Tri-Ax is made from heat-treated and nickel-plated 4140 steel, making it the strongest part out on the market. All hardware is stainless steel for the highest corrosion-resistance possible. Included in our kit is hardware to tighten up the factory shift knob perfectly into a locking position. These parts have been put to the test on the street and the track and are proven not to bind under extreme conditions or temperatures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e If you already have Steeda's shifter base bushing bracket, just let us know and we will be able to offer our Tri-Ax Race Short Throw Shifter at a slightly reduced price without the shifter base bushing bracket (it is required in order to use this shifter).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eU.S. Utility Patent 7,464,621\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePurchase your Steeda S550 \/ S650 Mustang MT-82 Tri-Ax Race Short Throw Shifter for your 2015+ Mustang GT at Steeda Autosports today!\u003c\/p\u003e\n\u003csection\u003e\u003cstrong\u003eProduct Benefits:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e30% throw reduction\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e20% lighter than the competition\u003c\/li\u003e\n\u003cli\u003eEliminates slop and shifter deflection\u003c\/li\u003e\n\u003cli\u003eShift knob sits 1\" lower for ideal 'power shifting' position\u003c\/li\u003e\n\u003cli\u003eTop-loaded installation with adjustable springs, in-car assembly\u003c\/li\u003e\n\u003cli\u003eRetains factory pull-up reverse lockout, OE thread pitch, and back-up camera functionality\u003c\/li\u003e\n\u003cli\u003eIncludes Steeda's Shifter Base Bushing Bracket\u003c\/li\u003e\n\u003cli\u003ePrecision-fit bushings for a direct positive feeling shift\u003c\/li\u003e\n\u003cli\u003eLifetime Steeda warranty\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003cp\u003e\u003cbr\u003e\n\u003cbr\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145516626178,"sku":"SDA-555-7317","price":629.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/steeda-s550-mustang-gt-mt-82-tri-ax-race-short-throw-shifter-15-16-gt-555-3717-00_2.jpg?v=1785004176"},{"product_id":"steeda-tri-ax-short-throw-shifter-for-tremec-3550-tko-1979-2004-mustang-555-7453","title":"Steeda Tri-Ax Short Throw Shifter for Tremec 3550 \u0026 TKO (1979-2004 Mustang) - 555-7453","description":"Steeda Tri-Ax Shifter for Tremec 3550 \u0026amp; TKO - 555-7453\u003cbr\u003e\u003cbr\u003e\u003cp\u003eUnlike other heavy-duty shifters, Steeda didn't just copy their T-5 shifter onto a Tremec base. The entire shifter mechanism was re-engineered to have the correct pivot ratio and spring tension for the beefier Tremec transmission. Your Tremec isn't the same inside as a T-5. Why should your shifter be?\u003c\/p\u003e\u003cp\u003eSteeda did keep the patented features that make the Tri-Ax the most popular shifter in the market. From the ergonomically comfortable Tri-Ax handle to the third gear assisting Offset preload mechanism. You can be sure this shifter will perform as you've come to expect a Tri-Ax shifter to perform. Giving you no miss 3rd gear shifts, short throws, and a positive, confident feel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003c\/p\u003e\u003csection\u003e\u003cul\u003e\n\u003cli\u003e\"Offset-Preload\" coil springs find third gear for you so you won't miss!\u003c\/li\u003e\n\u003cli\u003eMost comfortable hand position of any short throw shifter\u003c\/li\u003e\n\u003cli\u003eTwo position adjustable height\u003c\/li\u003e\n\u003cli\u003eShortest throw of any shifter\u003c\/li\u003e\n\u003cli\u003eSmooth, confident, precise shifts\u003c\/li\u003e\n\u003cli\u003eExclusive BootGuard (prevents damage to factory rubber inner boot)\u003c\/li\u003e\n\u003cli\u003eAdjustable positive stops prevent over extending the shift lever, preventing costly transmission damage\u003c\/li\u003e\n\u003cli\u003eCompact tower design is easier to install\u003c\/li\u003e\n\u003cli\u003eCNC machined from billet 6061 T-6 aluminum\u003c\/li\u003e\n\u003cli\u003eHeavy duty construction\u003cbr\u003eNo welds, stampings, or castings to break\u003c\/li\u003e\n\u003cli\u003eNickel plated pivot shaft won't rust or stain\u003c\/li\u003e\n\u003cli\u003eGrade 8 and stainless steel hardware\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eAccepts factory \u0026amp; Steeda knobs\u003c\/li\u003e\n\u003cli\u003eIncludes Steeda's exclusive Tri-Ax shift handle\u003c\/li\u003e\n\u003cli\u003eNo complicated, unnecessary adjustments unlike competitive designs\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003cbr\u003e\u003cbr\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145517576450,"sku":"SDA-555-7453","price":259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/555-7453_1.jpg?v=1785004180"},{"product_id":"steeda-tri-ax-short-throw-shifter-for-tremec-500-600-1979-2004-mustang-555-7456","title":"Steeda Tri-Ax Short Throw Shifter for Tremec 500\/600 (1979-2004 Mustang) - 555-7456","description":"\u003cp\u003eSteeda Tri-Ax Shifter for TKO 500\/600 - 555-7456\u003cbr\u003e\n\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIf you know of Steeda, you know we are not only famous for our fabulous suspension offerings, but are also known for our top selling line of smooth shifting short throw shifters.\u003c\/p\u003e\n\u003cp\u003eDue to the popularity of the Tremec 500\/600 transmission among the Ford faithful we proudly offer Steeda Tri-Ax shifter for the TKO 500\/600 transmissions.\u003c\/p\u003e\n\u003cp\u003eAll of the patented features that have made our other Tri-Ax shifters the top selling shifter in the market are also part of the TKO 500\/600 model. From the ergonomically comfortable Tri-Ax handle to the third gear assisting Offset preload mechanism. You can be sure this shifter will perform as you've come to expect a Tri-Ax shifter to perform. Giving you no miss 3rd gear shifts, short throws, and a positive, confident feel.\u003c\/p\u003e\n\u003cp\u003eCNC machined from 6061 T-6 aluminum right here in America, it will accept both Ford factory or Steeda Autosport shift knobs in a variety of styles.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003csection\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eOffset-Preload coil springs find third gear for you - so you won't miss!\u003c\/li\u003e\n\u003cli\u003eMost comfortable hand position of any short throw shifter\u003c\/li\u003e\n\u003cli\u003eTwo position adjustable height\u003c\/li\u003e\n\u003cli\u003eShortest throw of any shifter\u003c\/li\u003e\n\u003cli\u003eSmooth, confident, precise shifts\u003c\/li\u003e\n\u003cli\u003eExclusive BootGuard (prevents damage to factory rubber inner boot)\u003c\/li\u003e\n\u003cli\u003eAdjustable positive stops prevent over extending the shift lever, preventing costly transmission damage\u003c\/li\u003e\n\u003cli\u003eCNC machined from billet 6061 T-6 aluminum\u003c\/li\u003e\n\u003cli\u003eHeavy duty construction. No welds, stampings, or castings to break\u003c\/li\u003e\n\u003cli\u003eNickel plated pivot shaft won't rust or stain\u003c\/li\u003e\n\u003cli\u003eGrade 8 and stainless steel hardware\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eAccepts factory \u0026amp; Steeda knobs\u003c\/li\u003e\n\u003cli\u003eIncludes Steeda's exclusive Tri-Ax shift handle\u003c\/li\u003e\n\u003cli\u003eNo complicated, unnecessary adjustments unlike competitive designs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003cp\u003e\u003cbr\u003e\n\u003cbr\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145519247618,"sku":"SDA-555-7456","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/555-7456_1.jpg?v=1785004184"},{"product_id":"steeda-tri-ax-short-throw-shifter-for-tremec-t-56-1979-2004-mustang-555-7473","title":"Steeda Tri-Ax Short Throw Shifter for Tremec T-56 (1979-2004 Mustang) - 555-7473","description":"\u003cp\u003eSteeda Tri-Ax Shifter for T-56 six speed - 555-7473\u003cbr\u003e\n\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur famous line of Steeda Tri-Ax shifters extends to the 6-speed family of Tremec Ford Spec T56 transmissions as well.\u003c\/p\u003e\n\u003cp\u003eAs you would come to expect from the Steeda Tri-Ax, all of the patented features that have made our other Tri-Ax shifters the top selling shifter in the market are also part of the Tremec T56 model. From the ergonomically comfortable Tri-Axhandle to the third gear assisting Offset preload mechanism. You can be sure this shifter will perform as you've come to expect a Tri-Ax shifter to perform. Giving you no miss 3rd gear shifts, short throws, and a positive, confident feel.\u003c\/p\u003e\n\u003cp\u003eNote: This shifter fits 2003\/04 Cobra's with OEM T-56 transmission, and 1979-2004 Mustangs with AFTERMARKET TREMEC T56 conversion.\u003c\/p\u003e\n\u003csection\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\"Offset-Preload\" coil springs find third gear for you - so you won't miss\u003c\/li\u003e\n\u003cli\u003eMost comfortable hand position of any short throw shifter\u003c\/li\u003e\n\u003cli\u003eTwo position adjustable height\u003c\/li\u003e\n\u003cli\u003eShortest throw of any shifter\u003c\/li\u003e\n\u003cli\u003eSmooth, confident, precise shifts\u003c\/li\u003e\n\u003cli\u003eExclusive BootGuard (prevents damage to factory rubber inner boot)\u003c\/li\u003e\n\u003cli\u003eAdjustable positive stops prevent over extending the shift lever, preventing costly transmission damage\u003c\/li\u003e\n\u003cli\u003eCompact tower design is easier to install\u003c\/li\u003e\n\u003cli\u003eCNC machined from billet 6061 T-6 aluminum\u003c\/li\u003e\n\u003cli\u003eHeavy duty construction. No welds, stampings, or castings to break\u003c\/li\u003e\n\u003cli\u003eNickel plated pivot shaft won't rust or stain\u003c\/li\u003e\n\u003cli\u003eGrade 8 and stainless steel hardware\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eAccepts factory \u0026amp; Steeda knobs\u003c\/li\u003e\n\u003cli\u003eIncludes Steeda's exclusive Tri-Ax shift handle\u003c\/li\u003e\n\u003cli\u003eNo complicated, unnecessary adjustments unlike competitive designs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003cp\u003e\u003cbr\u003e\n\u003cbr\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145520001282,"sku":"SDA-555-7473","price":259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/steeda-555-7473-v2-1.jpg?v=1785004186"},{"product_id":"steeda-tri-ax-short-throw-shifter-t-56-magnum-xl-2005-2026-mustang-555-7474","title":"Steeda Tri-Ax Short Throw Shifter T-56 Magnum XL (2005-2026 Mustang) - 555-7474","description":"\u003cp\u003eSteeda Tri-Ax Shifter for Magnum XL \/ S-197 T-56 - 555-7474\u003cbr\u003e\n\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Tri-Ax shifter is one of the hottest selling shifters on the market thanks to it's proven track record for well over a decade of street and track use by tens of thousands of customers.\u003c\/p\u003e\n\u003cp\u003eWhen the new Tremec T-56 Magnum XL started hitting the streets, owners of current Tri-Ax shifters began coming to us asking for an upgrade. The result is our new Steeda Tri-Ax shifter for the Tremec Magnum XL transmission for 2005+ Mustang.\u003c\/p\u003e\n\u003cp\u003eThe Tremec T-56 Magnum XL is a new 6-speed manual transmission designed to replace the 2005-2010 Mustang GT 5-speed transmission with it's remote mounted shifter set up and to also replace the Getrag MT-82 transmission in the 2011+ Mustangs. The new T-56 Magnum features a much more robust direct shifter connection eliminating the remote set up on the 2005-2010 models and greatly improving durability over the Getrag MT-82 in the 2011+ models.\u003c\/p\u003e\n\u003cp\u003eOur Tri-Ax shifter for this new transmission was designed with the same standards as all our other Tri-Ax shifters. Our shifter directly replaces the Tremec shifter that is supplied with the transmission and features our offset pre-load shift mechanism for \"no miss\" 2-3 shifts, adjustable positive stops to prevent over extending the shift lever and a nickel plated pivot shaft that won't rust or stain.\u003c\/p\u003e\n\u003cp\u003eAs you would expect from our shifters they are CNC machined from 6061 T-6 aluminum with no welds, castings, or stampings that can break. Our internal design is the same design that has been repeatedly tested to over 1.5 million shifts with no measurable wear of the internal pivot mechanism. All other competitor's internal construction would never endure such a test without significant wear.\u003c\/p\u003e\n\u003cp\u003eIf you decide to step up to the new T-56 Magnum transmission, take your upgrade all the way with our Tri-Ax shifter.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTestimonial\u003cbr\u003e\u003c\/strong\u003eI am not a performance driver anymore. These days my Mustang is my daily driver and weekend cruiser. So my needs in a short throw shifter are somewhat different than those of most enthusiasts. I wanted a shifter with a somewhat shorter throw than stock but still long enough for my relaxed shifting style. But most of all, the shifter had to be as quiet as stock. I tried one of the very expensive performance shifters and liked the shorter throw but hated the amount of noise, vibration and harshness (NVH) that it introduced, so after about a month I went back to the shop and had them reinstall the stock shifter. I found out later that the NVH problem was due to damage caused by an improper installation so I don't know what it would have been like had it been properly installed.\u003cbr\u003e\n\u003cbr\u003e\nOnce back to using the stock shifter, I realized how much I still wanted a shorter throw but without the NVH so I started asking around and came to the conclusion that the Steeda Short Throw Shifter might be my best option. After some conversation with the helpful people at Steeda, I ordered and received their shifter. I had a different shop do the installation this time. Driving away after the installation, I noticed an immediate difference that brought a grin to my face. This shifter was exactly what I was looking for! It has a nice throw that is shorter than stock but not too extreme. It has very precise movement and best of all, it is just as quiet as the stock shifter! There is a slight click as it is pulled into each gear that is more felt than heard and is a reassuring confirmation that you are in the gear. The reverse lockout is positive without requiring too much effort (I had expected I would want to switch to the included lighter spring but decided it wasn't necessary once I tried it).\u003cbr\u003e\n\u003cbr\u003e\nI can't say how it would do in performance use since that's not my style but if you are looking for a reasonably priced quality shifter with great feel and no added noise then the Steeda shifter is a great choice. I could not be more pleased!\u003c\/p\u003e\n\u003csection\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\"Offset-Preload\" coil springs find third gear for you - so you won't miss!\u003c\/li\u003e\n\u003cli\u003eSmooth, confident, precise shifts with short throws\u003c\/li\u003e\n\u003cli\u003eAdjustable positive stops prevent over extending the shift lever\u003c\/li\u003e\n\u003cli\u003eHeavy duty construction. No welds, stampings, or castings to break\u003c\/li\u003e\n\u003cli\u003eHeavy duty construction and durability no competitor can match\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003cp\u003e\u003cbr\u003e\n\u003cbr\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145520328962,"sku":"SDA-555-7474","price":289.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/555-7474.jpg?v=1785004185"},{"product_id":"steeda-tri-ax-short-throw-shifter-for-tremec-tr-3650-2001-2004-mustang-555-7363","title":"Steeda Tri-Ax Short Throw Shifter for Tremec TR-3650 (2001-2004 Mustang) - 555-7363","description":"\u003cp\u003eSteeda Tri-Ax Billet Shifter for TR-3650 - 555-7363\u003cbr\u003e\n\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eLike the rest of the Tri-Ax line the new shifter has been specifically engineered for the new transmission, yet retains all the great features of the current line-up of Tri-Ax shifters.\u003c\/p\u003e\n\u003cp\u003eThe Tri-Ax starts with precision CNC machined billet aluminum body. The body's heavy-duty construction features no welds, stampings or castings for ultimate durability and precision engineering to fit right.\u003c\/p\u003e\n\u003cp\u003eInside, the pivot shaft has been specially designed to have the correct pivot ratio and short shift-throw for theTR-3650. The nickel-plated shaft won't rust or stain, and has been machined to exacting tolerances for smooth, precise operation. Offset pre-load springs make sure you find third gear every time and adjustable positive stops prevent damage to the transmission. Up top, the Tri-Ax features an exclusive boot guard to prevent damage to the factory inner boot, two-position adjustable handle height and a new forged Tri-Ax shift handle. The forged aluminum handle is strongest and lightest handle available on the market. Its unique three-axis bend places the shift knob closer to the driver for fast, precise and comfortable shifts.\u003c\/p\u003e\n\u003csection\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate durability and precision engineering\u003c\/li\u003e\n\u003cli\u003eWon't rust or stain\u003c\/li\u003e\n\u003cli\u003eFast, precise, comfortable shifts\u003c\/li\u003e\n\u003cli\u003eNo complicated, unnecessary adjustments unlike competitive designs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003cp\u003e\u003cbr\u003e\n\u003cbr\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145520525570,"sku":"SDA-555-7363","price":249.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/555-7363.jpg?v=1785004187"},{"product_id":"steeda-tri-ax-shifter-handle-1979-2004-mustang-555-7153","title":"Steeda Tri-Ax Shifter Handle (1979-2004 Mustang) - 555-7153","description":"Steeda Tri-Ax Shifter Handle - 555-7153\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe Steeda Tri-Ax stick shift handle combines the quick shifts of a short handle shifter lever with an easy to reach, ergonomic design. The exclusive three axis bend positions your hand perfectly, for short, precise, and comfortable shifts. (You won't have to bend over to reach 5th gear like you do with those other handles)..\u003c\/p\u003e\u003cp\u003eAs a result of Steeda's never ending search to provide the very best performance parts, all Tri-Ax manual transmission handles are now Forged from high strength aluminum alloy. The new forging features a tapered thread boss and military spec radius-root threads to increase strength by over 70%. This high-strength light weight design reduces inertia, for quicker and more precise shifts than are possible with bulky steel handles.\u003c\/p\u003e\u003cp\u003eThe Tri-Ax handle fits the stock 5 speed T-5 \u0026amp; T-56 shifter as well as many other popular shifters, and is standard equipment on Steeda's complete Tri-Ax billet shifter assemblies for 1979-2004 stick shift Fox body, SN95, and New Edge Ford Mustangs.\u003c\/p\u003e\u003cp\u003eUS Patent 449,809\u003c\/p\u003e\u003csection\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eErgonomic design\u003c\/li\u003e\n\u003cli\u003eShort, precise, comfortable shifts\u003c\/li\u003e\n\u003cli\u003eHigh strength forged alloy offers long lasting durability\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003cbr\u003e\u003cbr\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145521213698,"sku":"SDA-555-7153","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/555-7153_1.jpg?v=1785004189"},{"product_id":"steeda-tri-ax-billet-shifter-for-t-5-t-45-555-7353","title":"Steeda Shifter Base and Handle Gasket - T5 \/ T45 \u0026 TR3650 (1982-2004 Mustang) - 555-7353","description":"Steeda Tri-Ax Billet Shifter for T-5 \u0026amp; T-45 - 555-7353\u003cbr\u003e\u003cbr\u003e\u003cp\u003eSteeda has re-invented the Short Throw Shifter for the Fox Body and SN95 Mustang! This shifter is CNC machined from billet 6061 T-6 aluminum and has a heavy duty construction and design. It has a nickel plated pivot shaft so it will not rust or stain. Also, the hardware is made from grade 8 and stainless steel. This shifter comes with an Exclusive BootGuard which will help prevent damage to the factory inner boot. This shifter is the smoothest, most comfortable, quickest shifting, shortest throw shifter on the market.\u003c\/p\u003e\u003cp\u003eThe short throw shifter incorporates adjustable positive stops which prevent over extending the shift lever, preventing costly transmission damage. (The T-5 does not have internal stops, so if shifting too hard, the shift forks can bend)\u003c\/p\u003e\u003cp\u003eNot all Mustang shifters are created equal. Learn more about what makes Steeda stand out from the crowd: \u003ca href=\"https:\/\/www.steedablog.com\/2010\/04\/tri-ax-shifter-extreme-engineering\/\"\u003ehttps:\/\/www.steedablog.com\/2010\/04\/tri-ax-shifter-extreme-engineering\/\u003c\/a\u003e\u003c\/p\u003e\u003csection\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e\"Offset-Preload\" coil springs find third gear for you - so you won't miss!\u003c\/li\u003e\n\u003cli\u003eMost comfortable hand position of any short throw shifter\u003c\/li\u003e\n\u003cli\u003eTwo position adjustable height\u003c\/li\u003e\n\u003cli\u003eShortest throw of any shifter\u003c\/li\u003e\n\u003cli\u003eSmooth, confident, precise shifts\u003c\/li\u003e\n\u003cli\u003eExclusive BootGuard (prevents damage to factory rubber inner boot)\u003c\/li\u003e\n\u003cli\u003eAdjustable positive stops prevent over extending the shift lever, preventing costly transmission damage\u003c\/li\u003e\n\u003cli\u003eCompact tower design is easier to install\u003c\/li\u003e\n\u003cli\u003eCNC machined from billet 6061 T-6 aluminum\u003c\/li\u003e\n\u003cli\u003eHeavy duty construction. No welds, stampings, or castings to break\u003c\/li\u003e\n\u003cli\u003eNickel plated pivot shaft won't rust or stain\u003c\/li\u003e\n\u003cli\u003eGrade 8 and stainless steel hardware\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eAccepts factory \u0026amp; Steeda knobs\u003c\/li\u003e\n\u003cli\u003eIncludes Steeda's exclusive Tri-Ax shift handle\u003c\/li\u003e\n\u003cli\u003eNo complicated, unnecessary adjustments unlike competitive designs\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003cbr\u003e\u003cbr\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145521475842,"sku":"SDA-555-7353","price":259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/steeda-555-7353-v2-1-1.jpg?v=1785004188"},{"product_id":"steeda-tri-ax-short-throw-shifter-2011-14-mustang-gt-boss-302-v6-555-7312","title":"Steeda Tri-Ax Short Throw Shifter (2011-14 Mustang GT \/ Boss 302 \/ V6) - 555-7312","description":"\u003cp\u003eSteeda's Tri-Ax shifter for the 2011 and up Mustang V6 and GT is crafted from billet aluminum, steel, and composite components for solid construction and to provide no increase in shifter NVH. This shifter will provide a 20% shorter throw and retains full reverse lockout functionality of the factory shifter and also allows for spring pressure adjustment.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eRe-engineered pivot mechanism to provide no change in shifter knob height to preserve shifter ergonomics while still providing a shorter throw. Nickel plated finish for great looks and corrosion protection.\u003c\/p\u003e\n\u003cp\u003eAccepts factory shift knobs and aftermarket knobs with M12 x 1.25 thread pitch. Easy to install and does not require any permanent modifications to your vehicle. Comes with a lifetime warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTestimonial\u003cbr\u003e\u003c\/strong\u003eI am not a performance driver anymore. These days my Mustang is my daily driver and weekend cruiser. So my needs in a short throw shifter are somewhat different than those of most enthusiasts. I wanted a shifter with a somewhat shorter throw than stock but still long enough for my relaxed shifting style. But most of all, the shifter had to be as quiet as stock. I tried one of the very expensive performance shifters and liked the shorter throw but hated the amount of noise, vibration and harshness (NVH) that it introduced, so after about a month I went back to the shop and had them reinstall the stock shifter. I found out later that the NVH problem was due to damage caused by an improper installation so I don't know what it would have been like had it been properly installed.\u003cbr\u003e\n\u003cbr\u003e\nOnce back to using the stock shifter, I realized how much I still wanted a shorter throw but without the NVH so I started asking around and came to the conclusion that the Steeda Short Throw Shifter might be my best option. After some conversation with the helpful people at Steeda, I ordered and received their shifter. I had a different shop do the installation this time. Driving away after the installation, I noticed an immediate difference that brought a grin to my face. This shifter was exactly what I was looking for! It has a nice throw that is shorter than stock but not too extreme. It has very precise movement and best of all, it is just as quiet as the stock shifter! There is a slight click as it is pulled into each gear that is more felt than heard and is a reassuring confirmation that you are in the gear. The reverse lockout is positive without requiring too much effort (I had expected I would want to switch to the included lighter spring but decided it wasn't necessary once I tried it).\u003cbr\u003e\n\u003cbr\u003e\nI can't say how it would do in performance use since that's not my style but if you are looking for a reasonably priced quality shifter with great feel and no added noise then the Steeda shifter is a great choice. I could not be more pleased!\u003c\/p\u003e\n\u003csection\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e20 % throw reduction\u003c\/li\u003e\n\u003cli\u003eMade of high quality billet materials\u003c\/li\u003e\n\u003cli\u003eNo increase in shifter NVH (Noise, vibration and harshness)\u003c\/li\u003e\n\u003cli\u003eRetains reverse lock-out\u003c\/li\u003e\n\u003cli\u003eComes with a LIFETIME warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003cp\u003e\u003cbr\u003e\n\u003cbr\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145521606914,"sku":"SDA-555-7312","price":329.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/555-7312-v2-1.jpg?v=1785004191"},{"product_id":"steeda-tri-ax-race-short-throw-shifter-2015-2023-mustang-ecoboost-555-7318","title":"Steeda Tri-Ax Race Short Throw Shifter (2015-2023 Mustang EcoBoost) - 555-7318","description":"Steeda S550 Mustang MT-82 Tri-Ax Race Short Throw Shifter (15-2023 EcoBoost) - 555-7318\u003cbr\u003e\u003cbr\u003e\u003cp\u003eSteeda's S550 Mustang EcoBoost MT-82 Tri-Ax Race Short Throw Shifter is a full factory shifter assembly replacement for your 2015-2023 Mustang EcoBoost. Our race short throw shifter eliminates all slop and deflection of the factory shifter, and still retains the factory shift knob, pull-up style reverse lockout and backup camera functionality.\u003c\/p\u003e\u003cp\u003eWith the replacement of your factory shifter assembly with our short throw shifter, you will notice a 30% reduction in throw between gears. Our shifter assembly will also lower the shift knob by 1\", putting it in a better 'power' shifting position. Our Steeda S550 Mustang MT-82 Tri-Ax Race Short Throw Shifter is quieter than the stock shifter during daily driving, although during race applications you may notice a slight NVH increase.\u003c\/p\u003e\u003cp\u003eOne of the great benefits to this shifter assembly is that it's completely top-loaded. Our short throw shifter for your 2015-2023 Mustang EcoBoost comes with 2 different spring set options for a fully adjustable shifting experience. The kit comes complete with 2 medium-resistance springs and 2 high-resistance springs. The Steeda Tri-Ax has adjustable return springs to fit every drivers' preference on shifter feel. Using an offset spring tension ensures that you hit your 2nd-3rd gear change every time. Since our S550 MT-82 short shifter is top-loaded, once the base plate is mounted, you can change all of your springs, levers and other options all from inside the car without taking out the full shifter assembly!\u003c\/p\u003e\u003cp\u003eOur Tri-Ax shifter features rigid mounting in the front and Steeda poly bushing in the rear, virtually eliminating slop and shifter deflection. With less deflection, you will feel a much more direct gear change. The assembly is transmission and chassis-mounted so you don't get the 'walking' affect of a fully transmission-mounted assembly, all while still gaining a more rigid shifter feel. Factory shift shaft bushings are replaced with wider, high-quality machine-finished, low-friction bushings. Tolerances are controlled up to a half thousandth of an inch to ensure OE-quality fitment, alignment and shaft actuation. These features alone make our Steeda Tri-Ax one of the most positive feeling shifters on the market today. To top it all off, our Steeda Mustang EcoBoost shifter assembly includes Dynamat sound-deadening material to close out your transmission tunnel and ensures your S550 stays as quiet as the stock assembly.\u003c\/p\u003e\u003cp\u003eSteeda's S550 Mustang EcoBoost MT-82 Tri-Ax Race Short Throw Shifter is manufactured from high-quality aircraft-grade aluminum making it 20% lighter than the competitions' shifter assemblies. The shift lever itself on our Tri-Ax is made from heat-treated and nickel-plated 4140 steel, making it the strongest part out on the market. All hardware is stainless steel for the highest corrosion-resistance possible. Included in our kit is hardware to tighten up the factory shift knob perfectly into a locking position. These parts have been put to the test on the street and the track and are proven not to bind under extreme conditions or temperatures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003e If you already have Steeda's shifter base bushing bracket, just let us know and we will be able to offer our Tri-Ax Race Short Throw Shifter at a slightly reduced price without the shifter base bushing bracket (it is required in order to use this shifter).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eU.S. Utility Patent 7,464,621\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePurchase your Steeda S550 Mustang EcoBoost MT-82 Tri-Ax Race Short Throw Shifter for your 2015--2023 Mustang EcoBoost at Steeda Autosports today!\u003c\/p\u003e\u003csection\u003e \u003cstrong\u003eProduct Benefits: \u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003e \u003cstrong\u003e30% throw reduction\u003c\/strong\u003e \u003c\/li\u003e\n\u003cli\u003e20% lighter than the competition\u003c\/li\u003e\n\u003cli\u003eEliminates slop and shifter deflection\u003c\/li\u003e\n\u003cli\u003eShift knob sits 1\" lower for ideal 'power shifting' position\u003c\/li\u003e\n\u003cli\u003eTop-loaded installation with adjustable springs, in-car assembly\u003c\/li\u003e\n\u003cli\u003eRetains factory pull-up reverse lockout, OE thread pitch, and back-up camera functionality\u003c\/li\u003e\n\u003cli\u003eIncludes Steeda's Shifter Base Bushing Bracket\u003c\/li\u003e\n\u003cli\u003ePrecision-fit bushings for a direct positive feeling shift\u003c\/li\u003e\n\u003cli\u003eLifetime Steeda warranty\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003c\/section\u003e\u003cbr\u003e\u003cbr\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145522229506,"sku":"SDA-555-7318","price":609.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/steeda-s550-mustang-ecoboost-mt-82-tri-ax-race-short-throw-shifter-15-16-ecoboost-555-3718-00.jpg?v=1785004194"},{"product_id":"steeda-tri-ax-short-throw-shifter-2005-2010-mustang-gt-555-7305","title":"Steeda Tri-Ax Short Throw Shifter (2005-2010 Mustang GT) - 555-7305","description":"Steeda 2005-10 Tri-Ax Shifter - 555-7305\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe Steeda Tri-Ax shifter has always led the way in performance. With this latest revision the evolution of this shifter continues for the 2005-2010 Mustang GT, and is the best version yet!\u003c\/p\u003e\u003cp\u003eThe factory steel mounting rail is replaced with a substantial billet beam for more positive location; and upgraded rear mounting bushings are supplied to further reduce deflection under hard shifting. The shifter base, handle, and beam are all CNC machined by Steeda from 6061 aluminum.\u003c\/p\u003e\u003cp\u003eFor the ultimate in accuracy and precision, the internal shift lever mechanism now pivots off a high quality spherical bearing that has been thoroughly tested to insure it withstands our standard of 1.5 million+ shifts without failure. Our 2 position handle height, a Steeda exclusive allows you to tailor the shifter for the best combination of throw length and comfortable reach.\u003c\/p\u003e\u003cp\u003eCheck out the great reviews for our shifter and place an order for the best shifter on the market today.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eU.S. Utility Patent 7,464,621\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTestimonial\u003cbr\u003e\u003c\/strong\u003eI am not a performance driver anymore. These days my Mustang is my daily driver and weekend cruiser. So my needs in a short throw shifter are somewhat different than those of most enthusiasts. I wanted a shifter with a somewhat shorter throw than stock but still long enough for my relaxed shifting style. But most of all, the shifter had to be as quiet as stock. I tried one of the very expensive performance shifters and liked the shorter throw but hated the amount of noise, vibration and harshness (NVH) that it introduced, so after about a month I went back to the shop and had them reinstall the stock shifter. I found out later that the NVH problem was due to damage caused by an improper installation so I don't know what it would have been like had it been properly installed.\u003cbr\u003e\u003cbr\u003eOnce back to using the stock shifter, I realized how much I still wanted a shorter throw but without the NVH so I started asking around and came to the conclusion that the Steeda Short Throw Shifter might be my best option. After some conversation with the helpful people at Steeda, I ordered and received their shifter. I had a different shop do the installation this time. Driving away after the installation, I noticed an immediate difference that brought a grin to my face. This shifter was exactly what I was looking for! It has a nice throw that is shorter than stock but not too extreme. It has very precise movement and best of all, it is just as quiet as the stock shifter! There is a slight click as it is pulled into each gear that is more felt than heard and is a reassuring confirmation that you are in the gear. The reverse lockout is positive without requiring too much effort (I had expected I would want to switch to the included lighter spring but decided it wasn't necessary once I tried it).\u003cbr\u003e\u003cbr\u003eI can't say how it would do in performance use since that's not my style but if you are looking for a reasonably priced quality shifter with great feel and no added noise then the Steeda shifter is a great choice. I could not be more pleased!\u003c\/p\u003e\u003csection\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eSuperior, patented Steeda technology!\u003c\/li\u003e\n\u003cli\u003ePrevent damage to the transmission and linkage under hard usage\u003c\/li\u003e\n\u003cli\u003eNever miss 3rd gear!\u003c\/li\u003e\n\u003cli\u003eNo complicated, unnecessary adjustments unlike competitive designs\u003c\/li\u003e\n\u003cli\u003eProper shorter throw engineered to make shifting easy, unlike other extremely short shifters that end up increasing shift effort making shifting more difficult and uncomfortable\u003c\/li\u003e\n\u003cli\u003eNo rubber used on main shifter shaft to wear out and cover up NVH\u003c\/li\u003e\n\u003cli\u003e3 lbs lighter than other (so-called) competing brands (Weight is the enemy of performance.)\u003c\/li\u003e\n\u003cli\u003eNatural shifting feel, not awkward to shift like other brands\u003c\/li\u003e\n\u003cli\u003eNo nylon bushing used in pivot to wear out like competitors. Tri-Ax was tested to 1.5 million shifts with no measurable wear!\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003cbr\u003e\u003cbr\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145523966210,"sku":"SDA-555-7305","price":389.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/555-7305.jpg?v=1785004199"},{"product_id":"steeda-short-throw-shifter-2002-2011-focus-555-7224","title":"Steeda Short Throw Shifter (2002-2011 Focus) - 555-7224","description":"Steeda Focus Tri-Ax\/F Shifter Mid 02-09 MTX75 - 555-7224\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe Steeda Focus Short Throw Shifter for late 2002-2011 Focus was built for performance without compromising comfort. Rather than just chopping down the stick like the 'other' short throw shifters, we decided to re-engineer the entire shift mechanism with an improved pivot ratio and a more natural knob height. This results in shorter throws without making you bend over to reach the shifter. It's the best of both worlds in a CNC-machined billet steel package that a do-it-yourselfer can install in about an hour. This is the slickest shifting Tri-Ax yet!\u003c\/p\u003e\u003cp\u003ePurchase your Steeda Focus Short Throw Shifter for your late 2002-2011 Focus at Steeda Autosports today!\u003c\/p\u003e\u003csection\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eReduce shifting throw\u003c\/li\u003e\n\u003cli\u003eAccepts factory or aftermarket shifter knobs\u003c\/li\u003e\n\u003cli\u003eImproved shift feel and accuracy\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003cbr\u003e\u003cbr\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145526423810,"sku":"SDA-555-7224","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/steeda-focus-short-throw-shifter-late-02-11-all-555-7224-0.jpg?v=1785004208"},{"product_id":"steeda-short-throw-shifter-2002-2004-focus-svt-555-7233","title":"Steeda Short Throw Shifter (2002-2004 Focus SVT) - 555-7233","description":"\u003cp\u003eThe Steeda Focus SVT Short Throw Shifter for 2002-2004 Focus SVT is more than just a short handle. We re-engineered the entire shift mechanism with an improved pivot ratio so you can enjoy faster shifts without having to bend down to reach the shift knob. The throws are shorter and the shift knob is located in a more comfortable position than the factory shifter, without being too short like other \"short throw\" shifters that are really nothing more than a chopped down stick.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Tri-Ax is manufactured with heavy-duty parts to withstand abuse. Installation can be done by the do-it-yourselfer with basic hand tools. The Tri-Ax is available for all Zetec and SVT Focus with a manual transmission.\u003c\/p\u003e\n\u003cp\u003ePurchase your Steeda Focus SVT Short Throw Shifter for your 2002-2004 Focus SVT at Steeda Autosports today!\u003c\/p\u003e\n\u003csection\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eReduce shifting throw\u003c\/li\u003e\n\u003cli\u003eAccepts factory or aftermarket shifter knobs\u003c\/li\u003e\n\u003cli\u003eImproved shift feel and accuracy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003cp\u003e\u003cbr\u003e\n\u003cbr\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145530126594,"sku":"SDA-555-7233","price":189.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/steeda-focus-svt-short-throw-shifter-02-04-svt-555-7233-0.jpg?v=1785004222"},{"product_id":"steeda-tri-ax-f-shifter-w-o-knob-2000-2002-5-focus-555-7213","title":"Steeda Tri-Ax\/F Shifter w\/o knob (2000-2002.5 Focus) - 555-7213","description":"Steeda Focus Tri-Ax\/F Shifter w\/o knob  00-Early 02 - 555-7213\u003cbr\u003e\u003cbr\u003e\u003cp\u003eSteeda re-invented the short-throw shifter! Steeda's Tri-Ax shifters are one of the smoothest, most comfortable, quickest shifting, shifters available for your Ford Focus. Their exclusive revised-geometry pivot mechanism gives the Tri-Ax a short throw without sacrificing comfort. Shifters are made from CNC machined billet 6061 T-6 aluminum and feature no welds, stampings, or castings. Includes grade 8 and stainless hardware. \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-weight: bold;\"\u003eFeatures and Benefits: \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrecisely-calibrated spring tension ''finds'' 3rd gear \u003c\/li\u003e\n\u003cli\u003eTwo position adjustment height \u003c\/li\u003e\n\u003cli\u003eShortest throw of any shifter \u003c\/li\u003e\n\u003cli\u003eSmooth, confident, precise shifts \u003c\/li\u003e\n\u003cli\u003eExclusive Boot Guard prevents damage to factory inner boot \u003c\/li\u003e\n\u003cli\u003eAdjustable positive stops prevent over extending the lever \u003c\/li\u003e\n\u003cli\u003eNickel-plated pivot shaft will not rust or stain. \u003c\/li\u003e\n\u003cli\u003eAccepts stock and most aftermarket shift knobs\u003c\/li\u003e\n\u003cli\u003eDirect fit for 2000-2002.5 Focus Except SVT \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145533665538,"sku":"SDA-555-7213","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/steeda-555-7213-v2-1.jpg?v=1785004231"},{"product_id":"steeda-focus-st-shifter-shifter-and-bracket-kit-13-555-7239","title":"Steeda Shifter Shifter and Bracket Kit (2013-2018 Focus ST) - 555-7239","description":"Steeda Focus ST Shifter Shifter and Bracket Kit 13+ - 555-7239\u003cbr\u003e\u003cbr\u003e\u003cp\u003eSteeda Focus ST Short Throw Shifter Kit for the 2013-2018 Focus ST contains everything you need to significantly reduce the shifter throw and improve shift feel and accuracy making your Focus much more fun to drive.\u003c\/p\u003e\u003cp\u003eManufactured and designed in house by Steeda's engineering team. 3 position adjustment at the shifter combined with the shifter bracket allows throw reductions of 32, 38, and 44 percent.\u003c\/p\u003e\u003cp\u003eOur shifter retains the full functionality of the reverse lockout and this kit comes complete with all required hardware and instructions.\u003c\/p\u003e\u003cp\u003ePurchase your Steeda Focus ST Short Throw Shifter Kit for your 2013-2018 MK3 Ford Focus ST at Steeda Autosports today!\u003c\/p\u003e\u003csection\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eAdjustable throw reduction, up to 44% reduction\u003c\/li\u003e\n\u003cli\u003eLightweight aluminum construction\u003c\/li\u003e\n\u003cli\u003eImproved shift feel and accuracy\u003c\/li\u003e\n\u003cli\u003eFull reverse lockout retention\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003cbr\u003e\u003cbr\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145534681346,"sku":"SDA-555-7239","price":244.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/steeda-focus-st-short-throw-shifter-kit-13-15-st-555-7239-0.jpg?v=1785004235"},{"product_id":"steeda-mt-82-tri-ax-short-throw-sport-shifter-2015-2026-mustang-gt-555-7320","title":"Steeda MT-82 Tri-Ax Short Throw Sport Shifter (2015-2026 Mustang GT) - 555-7320","description":"\u003cdiv\u003eSteeda's S650 Mustang Tri-Ax Short Throw Sport Shifter for the 2015+ Mustang dramatically improves your Mustang's gear shifting. Refresh your MT-82's shifter feel and make your drive more exhilarating with this shifter.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eShorter throw. Steeda's Mustang Tri-Ax Short Throw Sport Shifter for the S550\/S650 MT-82 uses a re-engineered pivot mechanism to provide a 15% shorter throw and improved shifter movement. The included solid front shifter mount arm mount bushings reduce movement in the shifter for more precise shifting.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eDIY installation. This straightforward install takes only about an hour and a half and you probably have all the tools you need sitting in your tool box. Dramatically improve the driving experience with this short throw shifter! Our Steeda S550\/S650 Mustang Tri-Ax Street Short Throw Sport Shifter is manufactured from 4140 heat-treated and nickel-plated steel for the strongest, corrosion-resistant shift lever out there.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e15% throw reduction\u003c\/div\u003e\n\u003cdiv\u003eDoes not require any permanent modifications to your vehicle\u003c\/div\u003e\n\u003cdiv\u003eTighter, more accurate, and more crisp shifts\u003c\/div\u003e\n\u003cdiv\u003eSolid, one-piece shift lever design\u003c\/div\u003e\n\u003cdiv\u003eNo increase in shifter NVH (noise, vibration, harshness)\u003c\/div\u003e\n\u003cdiv\u003eRetains factory shift knob thread M12 x 1.25 pitch\u003c\/div\u003e\n\u003cdiv\u003eRetains factory reverse lock-out\u003c\/div\u003e\n\u003cdiv\u003eMade of high-quality 4140 heat-treated and nickel-plated steel\u003c\/div\u003e\n\u003cdiv\u003eComes with a limited lifetime warranty\u003c\/div\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48149041414402,"sku":"SDA-555-7320","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/555-7320-v1-1__42471.1747842372.jpg?v=1785018815"},{"product_id":"steeda-tri-ax-short-shifter-and-bracket-kit-2011-2014-mustang-gt-boss-302-v6-555-7313","title":"Steeda Tri-Ax Short Shifter and Bracket Kit (2011-2014 Mustang GT \/ Boss 302 \/ V6) - 555-7313","description":"\u003cp\u003eSteeda's Tri-Ax short throw shifter and bracket kit combines two popular items in to one convenient kit. Dramatically improve your Mustang's gear shifting by upgrading to the Steeda short shifter for the 2011+ Mustang kit. Included in the kit is our wildly popular short throw shifter and shifter base bushing with bracket.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis straight forward install takes only about an hour and a half and you probably have all the tools you need sitting in your tool box. Dramatically improve the driving experience with this short throw shifter kit!\u003c\/p\u003e\n\u003cp\u003eNot all Mustang shifters are created equal. Learn more about what makes Steeda stand out from the crowd: \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTestimonial\u003cbr\u003e\u003c\/strong\u003eI am not a performance driver anymore. These days my Mustang is my daily driver and weekend cruiser. So my needs in a short throw shifter are somewhat different than those of most enthusiasts. I wanted a shifter with a somewhat shorter throw than stock but still long enough for my relaxed shifting style. But most of all, the shifter had to be as quiet as stock. I tried one of the very expensive performance shifters and liked the shorter throw but hated the amount of noise, vibration and harshness (NVH) that it introduced, so after about a month I went back to the shop and had them reinstall the stock shifter. I found out later that the NVH problem was due to damage caused by an improper installation so I don't know what it would have been like had it been properly installed.\u003cbr\u003e\n\u003cbr\u003e\nOnce back to using the stock shifter, I realized how much I still wanted a shorter throw but without the NVH so I started asking around and came to the conclusion that the Steeda Short Throw Shifter might be my best option. After some conversation with the helpful people at Steeda, I ordered and received their shifter. I had a different shop do the installation this time. Driving away after the installation, I noticed an immediate difference that brought a grin to my face. This shifter was exactly what I was looking for! It has a nice throw that is shorter than stock but not too extreme. It has very precise movement and best of all, it is just as quiet as the stock shifter! There is a slight click as it is pulled into each gear that is more felt than heard and is a reassuring confirmation that you are in the gear. The reverse lockout is positive without requiring too much effort (I had expected I would want to switch to the included lighter spring but decided it wasn't necessary once I tried it).\u003cbr\u003e\n\u003cbr\u003e\nI can't say how it would do in performance use since that's not my style but if you are looking for a reasonably priced quality shifter with great feel and no added noise then the Steeda shifter is a great choice. I could not be more pleased!\u003c\/p\u003e\n\u003csection\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e20 % throw reduction\u003c\/li\u003e\n\u003cli\u003eMade of high quality billet materials\u003c\/li\u003e\n\u003cli\u003eNo increase in shifter NVH (Noise, vibration and harshness)\u003c\/li\u003e\n\u003cli\u003eRetains reverse lock-out\u003c\/li\u003e\n\u003cli\u003eComes with a LIFETIME warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003cp\u003e\u003cbr\u003e\n\u003cbr\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48150480584962,"sku":"SDA-555-7313","price":359.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/555-7313-v2-1.jpg?v=1785027382"}],"url":"https:\/\/www.lethalperformance.com\/collections\/steeda-short-throw-shifters.oembed","provider":"Lethal Performance","version":"1.0","type":"link"}