{"title":"Steeda Cold Air Intakes","description":null,"products":[{"product_id":"steeda-hardcore-maxflow-closed-cold-air-intake-2015-2023-mustang-gt-555-3220","title":"Steeda HARDCORE MaxFlow Closed Cold Air Intake (2015-2023 Mustang GT) - 555-3220","description":"\u003cp\u003eSteeda S550 Mustang ProFlow Closed Cold Air Intake 5.0L (2015-2023 GT) - 555-3220\u003cbr\u003e\n\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eHorsepower per dollar, Steeda's S550 Mustang GT MaxFlow Closed Cold Air Intake is the best choice for stock intake manifold 2015-2023 Coyote powered Mustangs. Steeda MaxFlow Mustang Cold Air Intake for your S550 opens up the induction system of Ford's 5.0 powerplant and allows it to breathe much more freely than the stock intake system allows, taking your S550 Mustang GT to the highest level of performance. The system comes with an oiled reusable high flow panel filter and a high flow dry filter is available separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e Not approved for sale in California or states that require a California E.O. #. This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and\/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws. This limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.\u003c\/p\u003e\n\u003csection\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eCAD designed air box lid and tube [sealed]\u003c\/li\u003e\n\u003cli\u003eLargest mass air meter on the market (121mm) for most airflow possible\u003c\/li\u003e\n\u003cli\u003eCoolest intake air temperatures (IATs) on the market for consistent performance\u003c\/li\u003e\n\u003cli\u003e25HP increase more then stock\u003c\/li\u003e\n\u003cli\u003e30HP increase over stock at mid-range [max gains]\u003c\/li\u003e\n\u003cli\u003eFits all 2015-2023 S550 Mustang GTs, including 2018 and newer\u003c\/li\u003e\n\u003cli\u003eIncludes our washable Steeda S550 Mustang Oiled Air Filter ( #555-3221)\u003c\/li\u003e\n\u003cli\u003eQuick and easy install\u003c\/li\u003e\n\u003cli\u003eUsed on the Steeda 'Silver Bullet', the FIRST NA 2018 Mustang to get into the 10s in the 1\/4 mile \u003c\/li\u003e\n\u003cli\u003e***TUNE REQUIRED***\u003c\/li\u003e\n\u003cli\u003eRetains all factory vacuum lines with optional sound tube delete\u003c\/li\u003e\n\u003cli\u003eUtilizes the factory grille duct\u003c\/li\u003e\n\u003cli\u003eNo turbulence due to placement of factory hood vents on 2018\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003cli\u003eSteeda has been building the best Cold Air Intakes for Ford performance vehicles longer than any other company\u003c\/li\u003e\n\u003cli\u003eCheck out the included dyno sheet for hp\/tq gains\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cdiv\u003e\u003cem\u003eNote: Drop-in air filter color may vary.\u003c\/em\u003e\u003c\/div\u003e\n\u003c\/section\u003e\n\u003cp\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145523998978,"sku":"SDA-555-3220","price":649.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/555-3220-main.jpg?v=1785004202"},{"product_id":"steeda-proflow-cold-air-intake-2015-2023-mustang-ecoboost-555-3199","title":"Steeda ProFlow Cold Air Intake (2015-2023 Mustang Ecoboost) - 555-3199","description":"Steeda ProFlow EcoBoost CAI 2015-2023 Mustang - 555-3199\u003cbr\u003e\u003cbr\u003e\u003cp\u003eSteeda Autosports, the world's largest aftermarket manufacturer of Ford performance equipment is once again leading the performance market with our High-Velocity Steeda ProFlow Mustang Cold Air Intake for 2015-2023 S550 Ford EcoBoost Mustang.\u003c\/p\u003e\u003cp\u003eThis Steeda ProFlow Mustang Cold Air Intake for 2015-2023 EcoBoost Mustang opens up the intake system of Ford's new turbocharged 2.3L L4 power plant and allows it to breathe much more freely than the stock intake system allows - taking your 2015+ EcoBoost Mustang to the next level of performance.\u003c\/p\u003e\u003cp\u003eOur engineers started with a large surface area high-flow nano-fiber air filter, added our famous 'race-tested' velocity stack entry, and then designed a black rotary-molded heat shield with a durable rubber gasket to seal the shield against the vehicle's hood.\u003c\/p\u003e\u003cp\u003eYou would think this is more than enough, but we went the extra mile and designed this intake system with a complete replacement intake tube from the CAI box to the turbo!\u003c\/p\u003e\u003cp\u003eThis Steeda ProFlow Mustang Cold Air Intake for S550 2015-2023 EcoBoost Mustang is so effective at improving airflow to the engine that simply bolting it on will increase your horsepower and torque. A performance tune can be added for maximum performance! In an effort to maximize performance and provide our customers with only the very best products we have partnered with the leader in automotive tuning - SCT Performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYou have the option to run this bolt-on CAI with or without a tune. Please reference our dyno sheet included in the images above: \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e- Baseline run (non-PP): 256.51 rwhp and 288.27 ft\/lbs tq\u003c\/p\u003e\u003cp\u003e- CAI installed (factory tune): 283.21 rwhp and 298.03 ft\/lbs tq\u003c\/p\u003e\u003cp\u003e- CAI installed with Steeda tune: 304.28 rwhp and 366.26 ft\/lbs tq\u003c\/p\u003e\u003cp\u003eWith no tune, we saw a gain of 26.7 rwhp and 9.76 ft\/lbs tq!\u003c\/p\u003e\u003cp\u003eWith a Steeda tune, we saw a gain of 47.77 rwhp and 77.99 ft\/lbs tq over stock!\u003c\/p\u003e\u003cp\u003ePurchase your Steeda ProFlow EcoBoost Mustang Cold Air Intake for your S550 Mustang EcoBoost at Steeda Autosports today!\u003c\/p\u003e\u003cp\u003eThis limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.\u003c\/p\u003e\u003csection\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eCARB approved for 2015-2017 Mustang EcoBoost\u003c\/li\u003e\n\u003cli\u003eDoes not get heat soaked like factory air box\u003c\/li\u003e\n\u003cli\u003eCools to ambient temperature range significantly faster than the stock unit while producing more power\u003c\/li\u003e\n\u003cli\u003eEasy bolt in installation\u003c\/li\u003e\n\u003cli\u003eBetter flowing intake system\u003c\/li\u003e\n\u003cli\u003eHP and Torque increase at all RPM ranges - not just peak power\u003c\/li\u003e\n\u003cli\u003eStock tune with Steeda EcoBoost CAI - 26.7 rwhp and 9.76 ft\/lbs\u003c\/li\u003e\n\u003cli\u003eSteeda tune with Steeda EcoBoost CAI - 47.77 rwhp and 77.99 ft\/lbs tq\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003cli\u003eSteeda has been building Cold Air Intakes for Ford performance vehicles longer than any other company!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: bold;\"\u003eCARB Approval:\u003c\/span\u003e This intake is CARB approved for 2015-2017 model years only. For these years, the intake is approved for sale in California, and states adopting California standards. For 2018-2023 models, please note that the intake is not approved for sale in California, please see the warning below for more information. \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"font-weight: bold;\"\u003eWarning: Not approved for sale in California or states that require a California E.O. #.\u003c\/span\u003e This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations. Steeda Tuning will not change, remove or alter any emissions control devices on your vehicle.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003cbr\u003e\u003cbr\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145524621570,"sku":"SDA-555-3199","price":419.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/555_3199_s550_ecoboost_cai-5.jpg?v=1785004204"},{"product_id":"steeda-cold-air-intake-kit-2003-2004-mustang-mach-1-555-3121","title":"Steeda Cold Air Intake Kit (2003-2004 Mustang Mach 1) - 555-3121","description":"\u003cp\u003eSteeda 03-04 Mach 1 Cold Air Intake Kit Velocity Stack - 555-3121\u003cbr\u003e\n\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSteeda High Velocity Cold Air Kits all feature a new Velocity Stack for improved airflow, bringing more oxygen into the cylinder for better combustion.\u003c\/p\u003e\n\u003cp\u003eDesigned to work with the Mach 1 signature Shaker Hood Scoop, this model produces measurable results on the dyno - we gained 9.7 RWHP and 14.3 lb. ft. of torque on a recent installation.\u003c\/p\u003e\n\u003cp\u003eIn addition to the Steeda Logo stainless steel airbox, the kit also includes a Steeda Lifetime Filter that can easily be cleaned and re-oiled, making maintenance a snap. All hardware required for installation is included in the kit, along with illustrated instructions.\u003c\/p\u003e\n\u003cp\u003eThe kit mounts in the same location of the factory plastic piece it replaces, and it installs simply with just a few hand tools. Plenty of performance for the bucks!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning: Not approved for sale in California or states that require a California E.O. #.\u003c\/strong\u003e This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and\/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.\u003c\/p\u003e\n\u003cp\u003eThis limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.\u003c\/p\u003e\n\u003csection\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eDoes not get heat soaked like factory air box\u003c\/li\u003e\n\u003cli\u003eCools to ambient temperature range significantly faster than the stock unit while producing more power\u003c\/li\u003e\n\u003cli\u003eAdded horsepower and torque\u003c\/li\u003e\n\u003cli\u003eLifetime filter\u003c\/li\u003e\n\u003cli\u003eKeeps hot air out, cold air in\u003c\/li\u003e\n\u003cli\u003eStainless Steel Housing \u0026amp; Shield ( \u003cstrong\u003eNot Cheap Plastic\u003c\/strong\u003e )\u003c\/li\u003e\n\u003cli\u003eSteeda has been building Cold Air Intakes for Ford performance vehicles longer than any other company!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003cp\u003e\u003cbr\u003e\n\u003cbr\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145525342466,"sku":"SDA-555-3121","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/555-3121.jpg?v=1785004204"},{"product_id":"steeda-high-flow-inlet-tube-black-black-hose-2005-2009-mustang-gt-bullitt-555-3130-b","title":"Steeda High FLow Inlet Tube - Black \/ Black Hose (2005-2009 Mustang GT \/ Bullitt) - 555-3130-B","description":"Steeda Intake Tube replacement kit for 555-3120 CAI black silicone - 555-3130-B\u003cbr\u003e\u003cbr\u003e\u003cp\u003eSteeda's Pro-Flow Inlet Elbow was designed specifically for our very popular S197 Mustang Cold Air Intake.\u003c\/p\u003e\u003cp\u003eThe Pro-Flow intake tube is available in a high temperature heat resistant plastic, or available in real carbon fiber.\u003c\/p\u003e\u003cp\u003eThe high quality construction allows for colder air induction system temperatures resulting in less heat soak and lower air charge temperatures than competitive brands using metal tubes.\u003c\/p\u003e\u003cp\u003eWe have seen gains up to 8 horsepower and 8 ft lbs of torque to the tires throughout the entire power-band!!!\u003c\/p\u003e\u003cp\u003eNo additional tune is needed for this kit if you are already using a Steeda cold air intake with SCT or Diablo tuning package and installation is quick and simple. This kit includes gloss blue, or black, 4 ply silicone hose connectors, stainless steel hose clamps and instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e555-3141 - Black Silicone Hose Upgrade\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis Black Silicone upgrade kit is designed for the S197 GT Mustangs. You can replace the blue hoses with these black ones to match your car better! Fit's Steeda CAI for GT S197's (555-3130 \u0026amp; 555-3131) and Ford Racing CAI with the Steeda upgraded elbow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003e Will work with FRPP intakes but will require retuning if using FRPP's tune with one of our SCT tuners.\u003c\/p\u003e\u003csection\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHigh quality plastic inlet elbow allows for colder air charge than competitive metal brands.\u003c\/li\u003e\n\u003cli\u003eEasily installs in minutes and Looks great!\u003c\/li\u003e\n\u003cli\u003eSmooths incoming air for more Horsepower and Torque to the rear tires!\u003c\/li\u003e\n\u003cli\u003ePerfect upgrade to your Steeda or Ford Racing Cold Air Intake Kit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003cbr\u003e\u003cbr\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145525637378,"sku":"SDA-555-3130-B","price":159.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/555-3130-b_1.jpg?v=1785004205"},{"product_id":"steeda-cold-air-intake-kit-velocity-stack-2005-2009-mustang-v6-555-3124","title":"Steeda  Cold Air Intake Kit Velocity Stack (2005-2009 Mustang V6) - 555-3124","description":"\u003cp\u003eSteeda 2005 Mustang V6 Cold Air Intake Kit Velocity Stack - 555-3124\u003cbr\u003e\n\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIncrease horsepower and torque with our high velocity cold air intake for your 2005-09 4.0L V6 Mustang.\u003c\/p\u003e\n\u003cp\u003eSteeda's high velocity cold air intake earns it's name due to the exclusive velocity stack design.\u003c\/p\u003e\n\u003cp\u003eThe radiused entry of the velocity stack design increases and straightens airflow into the mass air for greater power and a cleaner MAF signal.\u003c\/p\u003e\n\u003cp\u003eWith a clean MAF signal you get better drivability than other designs and makes it easier to tune resulting in better power and the best drivability possible.\u003c\/p\u003e\n\u003cp\u003eIncludes a serviceable lifetime dual cone air filter that can be cleaned and re-oiled, but the big news here is that we've streamlined the airflow in the V6 S197 Mustang to the point that a computer re-flash isn't just an option, it's required! Check out the SCT X4 - the perfect tool for the job!\u003c\/p\u003e\n\u003cp\u003eSteeda's intake is supplied with a stainless steel air box and CNC billet aluminum mass air meter. It mounts in the factory location with the supplied rubber trim to seal it against the hood \u0026amp; fender to keep the hot air isolated from the filter. Our tests showed inlet temps a mere 10 degrees above ambient temperature. The Steeda Lifetime Filter can easily be cleaned and re-oiled, making maintenance a snap. All hardware required for installation is included in the kit.\u003c\/p\u003e\n\u003cp\u003eWe've found between 16 -20 more rear wheel horsepower with this kit combined with the required SCT tune. Power you can feel!\u003c\/p\u003e\n\u003cp\u003eRead more about the advantages in Steeda Mustang Cold Air Intakes over the competitors on our blog: https:\/\/www.steedablog.com\/2012\/03\/mustang-cold-air-intake-truth\/\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning: Not approved for sale in California or states that require a California E.O. #.\u003c\/strong\u003e This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and\/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.\u003c\/p\u003e\n\u003cp\u003eThis limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.\u003c\/p\u003e\n\u003csection\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eDoes not get heat soaked like factory air box\u003c\/li\u003e\n\u003cli\u003eCools to ambient temperature range significantly faster than the stock unit while producing more power\u003c\/li\u003e\n\u003cli\u003eAdded horsepower and torque\u003c\/li\u003e\n\u003cli\u003eLifetime filter\u003c\/li\u003e\n\u003cli\u003eKeeps hot air out, cold air in\u003c\/li\u003e\n\u003cli\u003eSteeda has been building Cold Air Intakes for Ford performance vehicles longer than any other company!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003cp\u003e\u003cbr\u003e\n\u003cbr\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145527046402,"sku":"SDA-555-3124","price":314.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/555-3124_1.jpg?v=1785004207"},{"product_id":"steeda-cold-air-intake-black-inlet-w-black-hoses-2005-2009-mustang-gt-bullitt-555-3131-b","title":"Steeda Cold Air Intake - Black Inlet w\/ Black Hoses (2005-2009 Mustang GT \/ Bullitt) - 555-3131-B","description":"\u003cp\u003eSteeda's new Cold Air Kit for the S197 produces the greatest power gains of any Cold Air Kit on the market. Testing has shown increases of up to 38 HP and 30 ft lbs of Torque to the rear wheels with Steeda's Cold Air Kit combined with our Custom SCT Tune.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\" \u003cstrong\u003eSCT has seen the highest horsepower and torque results while using Steeda's Cold Air Kit, over any other brand.\u003c\/strong\u003e \" - \u003cem\u003eChris Johnson, President of SCT Tuning\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eSteeda's lifetime filter can be cleaned and re-oiled, but the big news here is that we've streamlined the airflow in the S197 Mustang to the point that a computer re-flash isn't just an option, it's required! Check out the SCT X4 - the perfect tool for the job! Or check out our power pack featuring a package savings on our cold air\/tuner combo!\u003c\/p\u003e\n\u003cp\u003eThe kit is supplied with a stainless steel air box with built-in velocity stack. It mounts in the factory location with the supplied rubber trim to seal it against the hood \u0026amp; fender to keep the hot air out. Our tests showed inlet temps a mere 5 degrees above ambient temperature. The Steeda Lifetime Filter can easily be cleaned and re-oiled, making maintenance a snap. All hardware required for installation is included in the kit.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: bold;\"\u003eWarning:\u003c\/span\u003e Not approved for sale in California or states that require a California E.O. #. This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Use of Steeda's Cold Air Intake REQUIRES a tune under if not used with our Steeda CAI Restrictor which requires NO TUNE\u003c\/p\u003e\n\u003cp\u003eIndependent test results have proven gains of over 4 HP and 5 ft\/lbs of Torque over the entire RPM range of the so called 'leading brands'.\u003c\/p\u003e\n\u003cp\u003eUsed by the top tuners in the industry.\u003c\/p\u003e\n\u003cp\u003eRead more about the advantages in Steeda Mustang Cold Air Intakes over the competitors on our blog: https:\/\/www.steedablog.com\/2012\/03\/mustang-cold-air-intake-truth\/\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003csection\u003e\n\u003cul\u003e\n\u003cli\u003eDoes not get heat soaked like factory air box\u003c\/li\u003e\n\u003cli\u003eCools to ambient temperature range significantly faster than the stock unit while producing more power\u003c\/li\u003e\n\u003cli\u003eAdded horsepower and torque\u003c\/li\u003e\n\u003cli\u003eLifetime filter\u003c\/li\u003e\n\u003cli\u003eKeeps hot air out, cold air in\u003c\/li\u003e\n\u003cli\u003eStainless Steel Housing \u0026amp; Shield ( \u003cstrong\u003eNot Cheap Plastic\u003c\/strong\u003e )\u003c\/li\u003e\n\u003cli\u003eThe highest horsepower and torque rating on the market*\u003c\/li\u003e\n\u003cli\u003eIncludes Velocity Stack Air Inlet Guide to reduce air turbulence\u003c\/li\u003e\n\u003cli\u003eSteeda has been building Cold Air Intakes for Ford performance vehicles longer than any other company!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003cp\u003e\u003cbr\u003e\n\u003cbr\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145528488194,"sku":"SDA-555-3131-B","price":499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/555-3131-b.jpg?v=1785004213"},{"product_id":"steeda-aluminum-cold-air-inlet-tube-intake-2015-2018-focus-st-555-3208","title":"Steeda Aluminum Cold Air Inlet Tube Intake (2015-2018 Focus ST) - 555-3208","description":"\u003cp\u003eAfter you free up the majority of the turbo air intake restriction with our Steeda Cold Air intake for your 2.0L EcoBoost Focus ST, you can finish the intake system off and gain up to 5 more horsepower over the 10 to 12 horsepower the cold air kit already provides with our Steeda Focus ST Cold Air Inlet Tube Intake for 2015-2018 MK3 Ford Focus ST.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eManufactured from high-quality aluminum material, this Steeda Focus ST Cold Air Inlet Tube Intake directly replaces the air intake hose between the cold air intake box and the turbo inlet, removing what little restriction is left in the intake system. Being made from aluminum will keep the weight down and crank the performance up!\u003c\/p\u003e\n\u003cp\u003ePurchase your Steeda Focus ST Cold Air Inlet Tube Intake for your EcoBoost at Steeda Autosports today!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: To be used with Steeda Cold Air Intake ONLY\u003c\/strong\u003e\u003c\/p\u003e\n\u003csection\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces your entire inlet system\u003c\/li\u003e\n\u003cli\u003eLightweight aluminum design\u003c\/li\u003e\n\u003cli\u003eKeeps the air intake temps down\u003c\/li\u003e\n\u003cli\u003eDirect bolt on replacement\u003c\/li\u003e\n\u003cli\u003eUp to 5 more horsepower above what our cold air intake gains\u003c\/li\u003e\n\u003cli\u003eWrinkle black finish\u003c\/li\u003e\n\u003cli\u003eSteeda has been building Cold Air Intakes for Ford performance vehicles longer than any other company!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003cp\u003e\u003cbr\u003e\n\u003cbr\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145530749186,"sku":"SDA-555-3208","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/steeda-focus-st-cold-air-inlet-tube-intake-13-15-st-555-3175-0_1xxp-xw.jpg?v=1785004222"},{"product_id":"steeda-cold-air-intake-2016-2018-focus-rs-555-3213","title":"Steeda Cold Air Intake (2016-2018 Focus RS) - 555-3213","description":"Steeda Focus RS Cold Air IntakeÊ(16+ RS) - 555-3213\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe new 2016 MK3 Ford Focus RS is a fantastic performance platform that while already very good, can still be taken to the next level. Take the intake system of your 2.3L EcoBoost Focus RS to the next level with our in-house designed, tested, and manufactured Steeda Focus RS Cold Air Intake.\u003c\/p\u003e\u003cp\u003eThis Steeda Focus RS Cold Air Intake for the 2016 Focus RS does not require any ECM tuning making it an easy direct bolt-on. With peak to peak gains of 10 horsepower at the wheels and max gains of up to 16 horsepower, these are performance gains you will definitely feel. Our system incorporates a roto-molded thermoplastic airbox with a thermoplastic velocity stack, a high-flow serviceable air filter, and a silicone intake tube.\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-weight: bold;\"\u003eBetter intake temperatures.\u003c\/span\u003e The Steeda cold air intake gives your Mk3 Focus RS better intake air temperatures, this results in better performance and improved fuel economy. The lower IATs are a result of the design of the airbox, high flow filter, and the precision-molded thermoplastic velocity stack. The airbox was designed to utilize the cold air feed coming from the grille while sealing directly to the hood liner to ensure a cool, dense air charge to the engine. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarning: Not approved for sale in California or states that require a California E.O. #.\u003c\/strong\u003e This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003e Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and\/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.\u003c\/p\u003e\u003cp\u003eThis limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.\u003c\/p\u003e\u003csection\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eDoes not get heat soaked like factory air box\u003c\/li\u003e\n\u003cli\u003eCools to ambient temperature range significantly faster than the stock unit while producing more power\u003c\/li\u003e\n\u003cli\u003eUtilizes the factory cold air feed duct from the grille\u003c\/li\u003e\n\u003cli\u003ePrecision-molded thermoplastic velocity stack\u003c\/li\u003e\n\u003cli\u003eDoes not require any engine tuning\u003c\/li\u003e\n\u003cli\u003eGreatly increased intake resonance\u003c\/li\u003e\n\u003cli\u003eLooks great under the hood\u003c\/li\u003e\n\u003cli\u003eSteeda has been building Cold Air Intakes for Ford performance vehicles longer than any other company!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003c\/section\u003e\u003cbr\u003e\u003cbr\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145531830530,"sku":"SDA-555-3213","price":314.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/3213_1.jpg?v=1785004225"},{"product_id":"steeda-cold-air-intake-kit-2017-2020-fusion-sport-2-7l-555-3214","title":"Steeda Cold Air Intake Kit (2017-2020 Fusion Sport 2.7L) - 555-3214","description":"Steeda Fusion Sport 2017+ CAI - 555-3214\u003cbr\u003e\u003cbr\u003e\u003cp\u003eWhen Ford released the awesome new 2.7l Twin Turbo EcoBoost V6 Fusion Sport, the team at Steeda couldn't wait to get their hands on one! While it's a nice improvement having some extra cubic inches and an additional turbo, the team at Steeda knew we could squeak some more horsepower out of it. Introducing our hot new Twin Turbo Fusion Cold Air kit from Steeda! Featuring an in-house CAD-designed custom Roto-molded air box that seals directly to the hood liner and utilizes 2 high-flow velocity stacks and the factory cold air feeds. It keeps the hot air out while keeping both air filters cool. That's right, we incorporated 2 high-flow, million-mile warranty air filters into this kit. Both feature Steeda's exclusive velocity stacks to help this twin-turbo beast breathe as freely as possible. What makes this kit even better is the fact that it does not require any ECM tuning, making it an easy direct bolt-on!! In addition, under steady-state driving conditions, an increase in gas mileage should be noticed.\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-weight: bold;\"\u003eCooler IATs.\u003c\/span\u003e The Steeda cold air intake gives your Fusion better intake air temperatures, this results in better performance and improved fuel economy. The lower IATs are a result of the design of the airbox, high flow filters, and the precision-molded thermoplastic velocity stack. The airbox shields your intake from the heat in the engine bay, and features an inlet scoop that draws cool fresh air into the intake. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarning: Not approved for sale in California or states that require a California E.O. #.\u003c\/strong\u003e This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003e Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and\/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.\u003c\/p\u003e\u003cp\u003eThis limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.\u003c\/p\u003e\u003csection\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eMore Horsepower and Torque\u003c\/li\u003e\n\u003cli\u003eNo tuning required\u003c\/li\u003e\n\u003cli\u003eDoes not get heat soaked like factory air box\u003c\/li\u003e\n\u003cli\u003eCools to ambient temperature range significantly faster than the stock unit while producing more power\u003c\/li\u003e\n\u003cli\u003ePrecision molded velocity stacks\u003c\/li\u003e\n\u003cli\u003eBetter gas mileage\u003c\/li\u003e\n\u003cli\u003eReusable, cleanable filters\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003c\/section\u003e\u003cbr\u003e\u003cbr\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145532092674,"sku":"SDA-555-3214","price":389.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/555-3214-v2-3.jpg?v=1785004228"},{"product_id":"steeda-cai-for-gt350-intake-555-3218","title":"Steeda ProFlow Cold Air Intake - Tune Required (2015-2017 Mustang GT with GT350 Manifold) - 555-3218","description":"Steeda CAI for GT350 Intake - 555-3218\u003cbr\u003e\u003cbr\u003e\u003cp\u003eSteeda's popular cold air intake is not only a great choice for stock manifold 2015-2017 Mustangs but now thanks to our new kit, the GT350 manifold as well! This kit comes with a silicone adapter that will allow the Steeda ProFlow tune required S550 Cold air intake to work with the GT350 intake manifold.\u003cbr\u003eSteeda ProFlow Mustang Cold Air Intake for your S550 opens up the intake system of Ford's 5.0 powerplant and allows it to breathe much more freely than the stock intake system allows, taking your S550 Mustang GT to the next level of performance. Steeda's engineers utilized the OE cold air feed and a large surface area high-flow nano-fiber air filter, added our famous 'race-tested' velocity stack entry and then designed an advanced heat shield with a durable rubber gasket to seal the shield against the vehicle's hood. Steeda's precision CNC mass air housing provides the cleanest mass air signal on the market, resulting in smooth off-throttle to on-throttle response.\u003cbr\u003e\u003cbr\u003eWarning: Not approved for sale in California or states that require a California E.O. #. This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations. Note: Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and\/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws. This limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProduct Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOver 30 rwhp and 23 ft\/lb tq gain with a tune!\u003c\/li\u003e\n\u003cli\u003eOutperforms all other cold air intakes on the market today\u003c\/li\u003e\n\u003cli\u003ePower increase at all RPM ranges, not just peak power\u003c\/li\u003e\n\u003cli\u003ePrecision CNC mass air housing equals clean mass air signal resulting in smooth off-throttle to on-throttle acceleration\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145532387586,"sku":"SDA-555-3218","price":529.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/thumbnail-3_1.jpg?v=1785004229"},{"product_id":"steeda-cold-air-intake-2003-2004-cobra-555-3127","title":"Steeda Cold Air Intake (2003-2004 Cobra)- 555-3127","description":"Steeda's cold air high-flow intake for the 03-04 Cobra features a reusable dual cone filter with more surface area than single cone models to flow the most air.\u003cp\u003eThe Steeda high velocity air intake features a stainless steel heat shield that seals against the hood shielding more of the air from the engine compartment heat than the competitions models.\u003c\/p\u003e\u003cp\u003eThis intake is good for 14 to 18 RWHP on a stock Cobra and has been dyno tested in our Pompano Beach facility to add up to 25 RWHP on a modified Cobra.\u003c\/p\u003e\u003cp\u003eAll the necessary hardware is included for a direct bolt-on installation. Used in cars exceeding 600 rear wheel horsepower!\u003c\/p\u003e\u003cp\u003eRead more about the advantages in Steeda Mustang Cold Air Intakes over the competitors on our blog: \u003ca href=\"https:\/\/www.steedablog.com\/2012\/03\/mustang-cold-air-intake-truth\/\"\u003ehttps:\/\/www.steedablog.com\/2012\/03\/mustang-cold-air-intake-truth\/\u003c\/a\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarning: Not approved for sale in California or states that require a California E.O. #.\u003c\/strong\u003e This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003e Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and\/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.\u003c\/p\u003e\u003cp\u003eThis limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.\u003c\/p\u003e\u003csection\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eDoes not get heat soaked like factory air box\u003c\/li\u003e\n\u003cli\u003eCools to ambient temperature range significantly faster than the stock unit while producing more power\u003c\/li\u003e\n\u003cli\u003eAdded horsepower and torque\u003c\/li\u003e\n\u003cli\u003eLifetime filter\u003c\/li\u003e\n\u003cli\u003eKeeps hot air out, cold air in\u003c\/li\u003e\n\u003cli\u003eStainless Steel Housing \u0026amp; Shield\u003c\/li\u003e\n\u003cli\u003eSteeda has been building Cold Air Intakes for Ford performance vehicles longer than any other company!\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003cbr\u003e\u003cbr\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145533239554,"sku":"SDA-555-3127","price":219.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/555-3127.jpg?v=1785004229"},{"product_id":"steeda-cold-air-intake-restrictor-no-tune-required-2011-2014-mustang-gt-555-3189","title":"Steeda Cold Air Intake Restrictor - No Tune Required (2011-2014 Mustang GT) - 555-3189","description":"Steeda Cold Air Intake Restrictor 11-14 for 555-3155 \u0026amp; 3156 - 555-3189\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThis billet 6061 aluminum insert fits all Steeda CAI's with a 101mm mass air meters and allows for you to flash your computer back to stock. This is due to Steeda's exclusive velocity stack design and high flow air filter while maintaining all the factory cold air feeds.\u003c\/p\u003e\u003cp\u003eThe best part of both these kits is, once you want to upgrade to a Steeda performance tune you can! Simply remove the billet insert from the mass air meter and enjoy even more tire burning horse power and torque!!\u003c\/p\u003e\u003cp\u003eLike all Steeda manufactured parts, this too features an exclusive lifetime warranty.\u003c\/p\u003e\u003csection\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e555-3190 is for manual 5.0 liters 2011-2014 and comes with the restrictor so there is no tune required.\u003c\/li\u003e\n\u003cli\u003e555-3191 is for automatic 5.0 liters 2011-2014 and also comes with the restrictor so there is no tune required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eAllows you to maintain your factory tune!\u003c\/li\u003e\n\u003cli\u003eMore horse power and torque to the rear tires!\u003c\/li\u003e\n\u003cli\u003eLifetime warranty!\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003cp\u003eThis part is not approved for sale in California or states that require a California E.O. # and is intended for off-road and competition use only. Installation of this part on a vehicle that is driven on public roads may violate U.S. laws and\/or regulations. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws. For more information, please visit our Terms \u0026amp; Conditions page.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145534058754,"sku":"SDA-555-3189","price":94.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/555-3189_1.jpg?v=1785004235"},{"product_id":"steeda-cold-air-intake-kit-velocity-stack-1996-1999-2001-mustang-gt-cobra-555-3123","title":"Steeda Cold Air Intake Kit Velocity Stack (1996-1999\/2001 Mustang GT \/ Cobra) - 555-3123","description":"Get 7-10 dyno tested HP over a stock intake! With less restriction and more surface area this High-Flow Air Kit is a great source of power. Dyno-proven to outperform other air intake systems available today. An easy bolt-on for the garage mechanic and can be done in under one hour. Will not trip check engine light.\u003cp\u003eRead more about the advantages in Steeda Mustang Cold Air Intakes over the competitors on our blog: \u003ca href=\"https:\/\/www.steedablog.com\/2012\/03\/mustang-cold-air-intake-truth\/\"\u003ehttps:\/\/www.steedablog.com\/2012\/03\/mustang-cold-air-intake-truth\/\u003c\/a\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarning: Not approved for sale in California or states that require a California E.O. #.\u003c\/strong\u003e This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003e Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and\/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.\u003c\/p\u003e\u003cp\u003eThis limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.\u003c\/p\u003e\u003csection\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eDoes not get heat soaked like factory air box\u003c\/li\u003e\n\u003cli\u003eCools to ambient temperature range significantly faster than the stock unit while producing more power\u003c\/li\u003e\n\u003cli\u003eAdded horsepower and torque\u003c\/li\u003e\n\u003cli\u003eLifetime filter\u003c\/li\u003e\n\u003cli\u003eKeeps hot air out, cold air in\u003c\/li\u003e\n\u003cli\u003eStainless Steel Housing \u0026amp; Shield\u003c\/li\u003e\n\u003cli\u003eSteeda has been building Cold Air Intakes for Ford performance vehicles longer than any other company!\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003cbr\u003e\u003cbr\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145534288130,"sku":"SDA-555-3123","price":209.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/555-3123_1.jpg?v=1785004231"},{"product_id":"steeda-ram-air-intake-scoop-2013-2018-focus-st-555-3196","title":"Steeda Ram Air Intake Scoop (2013-2018 Focus ST) - 555-3196","description":"Steeda Focus ST Ram Air Intake Scoop - 555-3196\u003cbr\u003e\u003cbr\u003e\u003cp\u003eSteeda's Focus ST Ram Air Intake Scoop for 2013-2018 MK3 Ford Focus ST allows your intake to receive the most direct and non-turbulent cold air straight from the front of the car. The more direct induction of fresh air creates lower air inlet temperatures, resulting in horsepower and torque increase.\u003c\/p\u003e\u003cp\u003eUnlike our competitors' products, the Steeda Focus ST Ram Air Intake Scoop is far superior in that it allows for a more natural \"velocity effect,\" in which air flows from a large opening to a smaller entrance in the intake - resulting in direct, free-flowing, and cooler air. Best of all, it's compatible with stock and aftermarket cold air intakes!\u003c\/p\u003e\u003cp\u003ePurchase your Steeda Focus ST Ram Air Intake Scoop for your 2013-2018 2.0L EcoBoost Focus ST at Steeda Autosports today!\u003c\/p\u003e\u003csection\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eReduce air inlet temperatures\u003c\/li\u003e\n\u003cli\u003eIncreased hp \u0026amp; torque\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003cbr\u003e\u003cbr\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145534615810,"sku":"SDA-555-3196","price":144.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/steeda-focus-st-ram-air-intake-scoop-13-15-st-555-3196-0.jpg?v=1785004235"},{"product_id":"steeda-cold-air-intake-2013-2018-focus-st-555-3169","title":"Steeda Cold Air Intake (2013-2018 Focus ST) - 555-3169","description":"\u003cp\u003eThe MK3 2013-2018 Ford Focus ST is a fantastic performance platform that while already very good, can still be taken to the next level. Take the intake system of your 2.0L EcoBoost Focus ST to the next level with our in-house designed, tested, and manufactured Steeda Focus ST Cold Air Intake.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis Steeda Focus ST Cold Air Intake for 2013-2016 Focus ST does not require any ECM tuning making it an easy direct bolt on. With peak to peak gains of 10 horsepower at the wheels and max gains of up to 16 horsepower, these are performance gains you will definitely feel. Our system incorporates a roto-molded thermoplastic airbox, a precision-molded thermoplastic velocity stack, a high-flow serviceable air filter, and a silicone intake tube.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: bold;\"\u003eLower IATs.\u003c\/span\u003e The Steeda cold air intake gives your Mk3 Focus better intake air temperatures, this results in better performance and improved fuel economy. The lower IATs are a result of the design of the airbox, high flow filter, and the precision-molded thermoplastic velocity stack. The airbox was designed to utilize the cold air feed coming from the grille while sealing directly to the hood liner to ensure a cool, dense air charge to the engine. \u003c\/p\u003e\n\u003cp\u003eA suggested add-on is Steeda's Focus ST Ram Air Intake Scoop for 13-18 ST.\u003c\/p\u003e\n\u003cp\u003ePurchase your Steeda Focus ST Cold Air Intake for your 20132018 Focus ST at Steeda Autosports today!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning: Not approved for sale in California or states that require a California E.O. #.\u003c\/strong\u003e This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and\/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.\u003c\/p\u003e\n\u003cp\u003eThis limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.\u003c\/p\u003e\n\u003csection\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eDoes not get heat soaked like factory air box\u003c\/li\u003e\n\u003cli\u003eCools to ambient temperature range significantly faster than the stock unit while producing more power\u003c\/li\u003e\n\u003cli\u003eUtilizes the factory cold air feed duct from the grille\u003c\/li\u003e\n\u003cli\u003ePrecision-molded thermoplastic velocity stack\u003c\/li\u003e\n\u003cli\u003eDoes not require any engine tuning\u003c\/li\u003e\n\u003cli\u003eGreatly increased intake resonance\u003c\/li\u003e\n\u003cli\u003eLooks great under the hood\u003c\/li\u003e\n\u003cli\u003eSteeda has been building Cold Air Intakes for Ford performance vehicles longer than any other company!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003cp\u003e\u003cbr\u003e\n\u003cbr\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48150480617730,"sku":"SDA-555-3169","price":314.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/steeda-focus-st-cold-air-intake-13-15-st-555-3169-0.jpg?v=1785027385"}],"url":"https:\/\/www.lethalperformance.com\/collections\/steeda-cold-air-intakes.oembed","provider":"Lethal Performance","version":"1.0","type":"link"}