{"title":"Stainless Works Camaro \u0026 Corvette Headers \u0026 Exhaust","description":null,"products":[{"product_id":"stainless-works-corvette-c7-2014-headers-1-7-8in-primaries-3in-collectors-high-flow-cats-x-pipe","title":"Stainless Works C7188CAT 2014-2018 C7 Corvette 1-7\/8\" Headers with Cats (Factory Connect)","description":"Unleash the performance on your 2014-18 Corvette with this high flowing long tube header system from Stainless Works. This mandrel bent 304 stainless steel system features smooth bends and TIG welded American made fabrication. These 1-7\/8\" primaries are a perfect bolt on addition to your non-supercharged C7 engine for increased horsepower and torque. This system is tuner friendly with an additional wideband port placed directly under the hole in the tunnel brace. This allows your dyno tuners access without removing this plate to install the sensor. Features include: Port Matched Flanges, Mandrel Bent, Lifetime Warranty, 304 Stainless Steel, Fully TIG Welded, High-Flow Cats, Easy Access Wideband Port, X-Pipe Crossover, Longer Primary Tubes, Installer Friendly - Best Fitment in the Industry, Merge Spike for Scavenging\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e2014+ Corvette C7 Headers Features:\u003c\/strong\u003e\u003cbr\u003e‣ Choice of 2\" or 1-7\/8\" Primaries\u003cbr\u003e‣ Easy Access Wideband Port\u003cbr\u003e‣ 3\" dia Slip-Fit Connectors\u003cbr\u003e‣ X-Pipe Crossover\u003cbr\u003e‣ Merge Spike for Scavenging\u003cbr\u003e‣ High-Flow Cats or Off-Road leads\u003cbr\u003e‣ 3\/8\" Thick Port-Matched Flanges\u003cbr\u003e‣ Longer Primary Tubes\u003cbr\u003e‣ Fully TIG Welded \u0026amp; Mandrel Bent 304 Stainless Steel Tubing\u003cbr\u003e‣ Increases Airflow \u0026amp; Maximizes Performance\u003cbr\u003e‣ Installer Friendly - Best Fitment in the Industry\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWake the Beast!\u003c\/strong\u003e\u003cbr\u003eThe Corvette C7 becomes a monster with Stainless Works Long-Tube Headers. It sounds aggressive and powerful, and our butt dyno says we added about a million horsepower. But that’s not very scientific, so we consulted the dyno tuning experts at Big 3 Racing in Hinckley, OH. They strapped the C7 to the rollers for some tuning and we've got the gains off-the-chart!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSolid Construction\u003c\/strong\u003e\u003cbr\u003eMade to withstand grueling engine conditions, Stainless Works headers are fabricated from 304 stainless steel, which not only resist corrosion, but is more durable than its aluminized steel or 409 stainless steel counterparts.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e‣ 304 stainless steel construction\u003cbr\u003e‣ TIG welded for strength\u003cbr\u003e‣ Mandrel bent (no buckling) for optimal flow\u003cbr\u003e‣ Designed and Made in Chagrin Falls, Ohio, USA\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInnovative Design\u003c\/strong\u003e\u003cbr\u003eWe take our years of experience, and inject that knowledge into creating performance systems that maximize horsepower, torque and sound. Each system is designed for the specific vehicle with distinct features to get the most performance possible along with great fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDesigned For Choice\u003c\/strong\u003e\u003cbr\u003eOur C7 Systems give you the option to customize your system with varieties of primary tube size and emissions controls. If you're building a performance system, we offer the best to suit your needs. We've got it all, so you can customize your ride the way you want it.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFactory Connection\u003c\/strong\u003e\u003cbr\u003eStainless Works C7 Headers come in Factory Connect\u003cbr\u003e\u003cbr\u003eFactory Connect allows our headers or exhaust to connect to the factory exhaust or manifolds respectively. They connect to the factory location which is necked-down to accommodate fitment. The C7 System includes a full-length X-Pipe which allows for connections to the Factory Exhaust location, as well as many other aftermarket exhausts.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePrimary Size\u003c\/strong\u003e\u003cbr\u003eOne primary size doesn't fit all applications. Sure, 1-7\/8\" primaries are great if your running a stock motor with no major mods. But if you've got a blower on that thing and need to push more air, get a set of 2\" primaries and satisfy your need for more power.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstall-Ready\u003c\/strong\u003e\u003cbr\u003eWe want to make sure installation goes as smoothly as possible, that's why Stainless Works systems come Install-Ready.\u003cbr\u003e\u003cbr\u003eWhether clamps, O2 extensions, bolts or RTV silicone, our headers and exhausts come with all necessary accessories to make installation as smooth as possible.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLimited Lifetime Warranty\u003c\/strong\u003e\u003cbr\u003eStainless Works headers and exhausts are designed to take the punishment of your motor, and are backed by a Limited Lifetime Guarantee on material and workmanship.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIncreased Power\u003c\/strong\u003e\u003cbr\u003eFactory manifolds can be restrictive and hold back the true potential of your ride. Stainless Works' systems unlock the power of your engine. Our long tube, free-flowing design reduces back pressure, and will bring new found power that you can feel and hear.","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47091179946242,"sku":"SSWC7188CAT","price":2968.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/C7188CAT_1.jpg?v=1784946023"},{"product_id":"stainless-works-20-21-chevrolet-corvette-c8-6-2l-high-flow-catted-midpipe-kit-3in","title":"Stainless Works 2020-21 Corvette C8 Catted Midpipe Kit (2020-2025 Corvette) - C8CATLDS","description":"Stainless Works 2020-21 Corvette C8 Catted Midpipe Kit (2020-2021 Corvette) - C8CATLDS\u003cbr\u003e\u003cbr\u003eUnleash your 2020-21 Corvette C8 6.2L with these high flowing mid pipes from Stainless Works. Built by American craftsmen, these 3\" mandrel-bent midpipes feature high flow catalytic converters and can connect to either factory manifolds or Stainless Works headers.\nStainless Works Kits are built from corrosion resistant 304 stainless steel, our midpipes are TIG welded for strength and durability at our state-of-the-art facility in Streetsboro, Ohio. We stand by our products with a lifetime warranty on material and craftsmanship, and as always, our products are proudly made in the USA.\nFeatures:  \n\nFits Stock Manifolds Or Stainless Works Headers\n3\" Midpipe With High Flow Catalytic Converters\nSmooth mandrel bends optimize exhaust flow  \nFully TIG welded for strength and beauty   \n \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47091180044546,"sku":"SSWC8CATLDS","price":1420.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/c8catlds-1-primary.jpg?v=1784946023"},{"product_id":"stainless-works-16-21-camaro-ss-3in-redline-factory-connect-axle-back-w-valve-4in-quad-black-tips","title":"Stainless Works Axleback with Quad Black Chrome Tips - Factory Connect, Dual Mode Valves, Redline Sound (2016-2024 Camaro 6.2L) - CA16RVMKFRBC","description":"\u003cdiv\u003eImprove the sound and performance on your 2016+ Camaro SS with these axlebacks from Stainless Works. We've engineered a drone free aggressive muffler tuned specifically for the 6.2L engine.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eOur Legend series is designed to create our signature growl, increase volume over stock, yet maintain a comfortable cabin environment. We design Legend systems with the daily-driver in mind, improved tone with restrained loudness. A system that still gets the blood flowing, but allows for a comfortable ride.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eOur Redline series is designed to get the most aggressive sound out of your ride. We design Redline systems to maximize the volume and tone of the engine, while still eliminating any drone in the cabin. Resulting in a feeling that will make you want to high-five your friends in the face.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe \"Original\" sound is a tuned muffler designed back in 2016. The sound level is in between the Redline and Legend but has a unique tone that has become quiet popular. This system has no drone and sounds great in the vehicle without drowning out your radio.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eAvailable with or without NPP valves in the mufflers with Dual 5\" polished slash-cut double wall tips. Performance Connect is designed to connect to our long header system. The Factory connect axleback will require cutting of the stock exhaust to install. This system is built from corrosion resistant 304 stainless steel and TIG welded at our state of the art facility in Streetsboro, Ohio. As always, we stand by our products with a lifetime warranty on materials and craftsmanship.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eFeatures:\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThree Sound Levels To Choose From!\u003c\/div\u003e\n\u003cdiv\u003eStainless Works Built 3 Inch Valves For NPP\u003c\/div\u003e\n\u003cdiv\u003eYour Choice Of Polished Or Chrome Black Finish Tips\u003c\/div\u003e\n\u003cdiv\u003eSmooth Mandrel Bends Optimize Exhaust Flow\u003c\/div\u003e\n\u003cdiv\u003eFully TIG Welded For Strength And Beauty\u003c\/div\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47091180077314,"sku":"SSWCA16RVMKFRBC","price":1705.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/3293_source_1626374170.jpg?v=1784946020"},{"product_id":"stainless-works-2016-chevy-camaro-ss-3in-redline-factory-connect-axle-back-w-valve-4in-quad-tips","title":"Stainless Works CA16RVMKSFCR Redline Series Axleback Factory Connect w\/NPP Valve w\/Quad 4\" Tips (2016-2024 Camaro 6.2L \/ Factory Connect)","description":"Improve the sound and performance on your 2016+ Camaro SS with this Redline sound axleback from Stainless Works. We've engineered a drone free aggressive muffler tuned specifically for the 6.2L engine..\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- Legend or Redline Sound - You Choose\u003cbr\u003e- 3” Mandrel Bent Tubing\u003cbr\u003e- Excellent Fitment For Easy Installation\u003cbr\u003e- Larger Active Exhaust Valves\u003cbr\u003e- 304 Stainless Steel\u003cbr\u003e- TIG Welded For Beauty And Strength\u003cbr\u003e- Lifetime Warranty On Materials And Craftsmanship\u003cbr\u003e- Proudly Made in the USA\u003cbr\u003e\u003cbr\u003eOur Redline series is designed to get the most aggressive sound out of your ride. We design Redline systems to maximize the volume and tone of the engine, while still eliminating any drone in the cabin. Resulting in a feeling that will make you want to high-five your friends in the face.\u003cbr\u003e\u003cbr\u003eThis axleback features NPP valves in the mufflers with Quad 4\"\" polished slash-cut double wall tips. Designed to fit to the factory connection points. Exits out at factory location through the rear valance. This system is built from corrosion resistant 304 stainless steel and TIG welded at our state of the art, facility in Streetsboro, Ohio. As always, we stand by our products with a lifetime warranty on materials and craftsmanship.\u003cbr\u003e\u003cbr\u003eRedline and Legend Catback and axlebacks:\u003cbr\u003e1 db difference between Legend and Redline at Idle\u003cbr\u003e2 db difference between Legend and Redline at 4500 RPM\u003cbr\u003e\u003cbr\u003eRedline Catback and Axlebacks:\u003cbr\u003e38% more exhaust flow vs stock.\u003cbr\u003e\u003cbr\u003eLegend Catback and Axlebacks:\u003cbr\u003e29% more exhaust flow vs stock.\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47091180142850,"sku":"SSWCA16RVMKSFCR","price":1614.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/ca16rvmksfcr-1-primary_1.jpg?v=1784946023"},{"product_id":"stainless-works-2016-chevy-camaro-ss-3in-redline-perf-connect-axle-back-w-valve-4in-quad-tips","title":"Stainless Works CA16RVMKSPCR Redline Series Axleback Performance Connect w\/NPP Valve w\/Quad 4\" Tips (2016-2024 Camaro 6.2L \/ Performance Connect)","description":"Improve the sound and performance on your 2016+ Camaro SS with this Redline sound axleback from Stainless Works. We've engineered a drone free aggressive muffler tuned specifically for the 6.2L engine.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- Legend or Redline Sound - You Choose\u003cbr\u003e- 3” Mandrel Bent Tubing\u003cbr\u003e- Excellent Fitment For Easy Installation\u003cbr\u003e- Larger Active Exhaust Valves\u003cbr\u003e- 304 Stainless Steel\u003cbr\u003e- TIG Welded For Beauty And Strength\u003cbr\u003e- Lifetime Warranty On Materials And Craftsmanship\u003cbr\u003e- Proudly Made in the USA\u003cbr\u003e\u003cbr\u003eOur Redline series is designed to get the most aggressive sound out of your ride. We design Redline systems to maximize the volume and tone of the engine, while still eliminating any drone in the cabin. Resulting in a feeling that will make you want to high-five your friends in the face.\u003cbr\u003e\u003cbr\u003eThis axleback features NPP valves in the mufflers with Quad 4\"\" polished slash-cut double wall tips. Designed to fit to the performance connection points. Exits out at factory location through the rear valance. This system is built from corrosion resistant 304 stainless steel and TIG welded at our state of the art, facility in Streetsboro, Ohio. As always, we stand by our products with a lifetime warranty on materials and craftsmanship.\u003cbr\u003e\u003cbr\u003eRedline and Legend Catback and axlebacks:\u003cbr\u003e1 db difference between Legend and Redline at Idle\u003cbr\u003e2 db difference between Legend and Redline at 4500 RPM\u003cbr\u003e\u003cbr\u003eRedline Catback and Axlebacks:\u003cbr\u003e38% more exhaust flow vs stock.\u003cbr\u003e\u003cbr\u003eLegend Catback and Axlebacks:\u003cbr\u003e29% more exhaust flow vs stock.\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47091180175618,"sku":"SSWCA16RVMKSPCR","price":1614.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/ca16rvmkspcr-1-primary.jpg?v=1784946018"},{"product_id":"stainless-works-2014-18-corvette-6-2l-headers-2in-primaries-w-high-flow-cats-x-pipe","title":"Stainless Works C72CAT 2014-2018 C7 Corvette 2\" Headers with Cats (Factory Connect)","description":"Unleash the performance on your 2014-18 Corvette with this high flowing long tube header system from Stainless Works. This mandrel bent 304 stainless steel system features smooth bends and TIG welded American made fabrication. These 2\" primaries were developed for a performance upgraded Corvette with major power adders that need the increased capacity for exhaust flow. This system is tuner friendly with an additional wideband port placed directly under the hole in the tunnel brace. This allows your dyno tuners access without removing this plate to install the sensor.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e2014+ Corvette C7 Headers Features:\u003c\/strong\u003e\u003cbr\u003e‣ Choice of 2\" or 1-7\/8\" Primaries\u003cbr\u003e‣ Easy Access Wideband Port\u003cbr\u003e‣ 3\" dia Slip-Fit Connectors\u003cbr\u003e‣ X-Pipe Crossover\u003cbr\u003e‣ Merge Spike for Scavenging\u003cbr\u003e‣ High-Flow Cats or Off-Road leads\u003cbr\u003e‣ 3\/8\" Thick Port-Matched Flanges\u003cbr\u003e‣ Longer Primary Tubes\u003cbr\u003e‣ Fully TIG Welded \u0026amp; Mandrel Bent 304 Stainless Steel Tubing\u003cbr\u003e‣ Increases Airflow \u0026amp; Maximizes Performance\u003cbr\u003e‣ Installer Friendly - Best Fitment in the Industry\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWake the Beast!\u003c\/strong\u003e\u003cbr\u003eThe Corvette C7 becomes a monster with Stainless Works Long-Tube Headers. It sounds aggressive and powerful, and our butt dyno says we added about a million horsepower. But that’s not very scientific, so we consulted the dyno tuning experts at Big 3 Racing in Hinckley, OH. They strapped the C7 to the rollers for some tuning and we've got the gains off-the-chart!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSolid Construction\u003c\/strong\u003e\u003cbr\u003eMade to withstand grueling engine conditions, Stainless Works headers are fabricated from 304 stainless steel, which not only resist corrosion, but is more durable than its aluminized steel or 409 stainless steel counterparts.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e‣ 304 stainless steel construction\u003cbr\u003e‣ TIG welded for strength\u003cbr\u003e‣ Mandrel bent (no buckling) for optimal flow\u003cbr\u003e‣ Designed and Made in Chagrin Falls, Ohio, USA\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInnovative Design\u003c\/strong\u003e\u003cbr\u003eWe take our years of experience, and inject that knowledge into creating performance systems that maximize horsepower, torque and sound. Each system is designed for the specific vehicle with distinct features to get the most performance possible along with great fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDesigned For Choice\u003c\/strong\u003e\u003cbr\u003eOur C7 Systems give you the option to customize your system with varieties of primary tube size and emissions controls. If you're building a performance system, we offer the best to suit your needs. We've got it all, so you can customize your ride the way you want it.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFactory Connection\u003c\/strong\u003e\u003cbr\u003eStainless Works C7 Headers come in Factory Connect\u003cbr\u003e\u003cbr\u003eFactory Connect allows our headers or exhaust to connect to the factory exhaust or manifolds respectively. They connect to the factory location which is necked-down to accommodate fitment. The C7 System includes a full-length X-Pipe which allows for connections to the Factory Exhaust location, as well as many other aftermarket exhausts.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePrimary Size\u003c\/strong\u003e\u003cbr\u003eOne primary size doesn't fit all applications. Sure, 1-7\/8\" primaries are great if your running a stock motor with no major mods. But if you've got a blower on that thing and need to push more air, get a set of 2\" primaries and satisfy your need for more power.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstall-Ready\u003c\/strong\u003e\u003cbr\u003eWe want to make sure installation goes as smoothly as possible, that's why Stainless Works systems come Install-Ready.\u003cbr\u003e\u003cbr\u003eWhether clamps, O2 extensions, bolts or RTV silicone, our headers and exhausts come with all necessary accessories to make installation as smooth as possible.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLimited Lifetime Warranty\u003c\/strong\u003e\u003cbr\u003eStainless Works headers and exhausts are designed to take the punishment of your motor, and are backed by a Limited Lifetime Guarantee on material and workmanship.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIncreased Power\u003c\/strong\u003e\u003cbr\u003eFactory manifolds can be restrictive and hold back the true potential of your ride. Stainless Works' systems unlock the power of your engine. Our long tube, free-flowing design reduces back pressure, and will bring new found power that you can feel and hear.","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47155433406722,"sku":"SSWC72CAT","price":2968.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/c72cat-1-primary.jpg?v=1784947361"},{"product_id":"stainless-works-2016-18-camaro-ss-headers-2in-primaries-3in-high-flow-cats-x-pipe-afm-delete","title":"Stainless Works CA16HCAT 2016-2024 Camaro SS Headers: 2\" Primaries, Catted, No Valves","description":"\u003cstrong\u003eDetails\u003c\/strong\u003e\u003cbr\u003e2016-18 Camaro SS headers featuring port-matched flanges and mandrel-bent 2\" primaries and 3\" catted leads, x-pipe and tailpipes.\u003cbr\u003e\u003cbr\u003eOur Camaro SS System includes adapters for both Factory and Performance connections, making it easy to install whether you have the stock axleback or our Stainless Works Performance Axleback Systems. Our tailpipes include a valve delete plate that allows you to mount the electric motor and alleviate any AFM engine codes on the dash.\u003cbr\u003e\u003cbr\u003eGet the most out of your Chevy Camaro with Stainless Works exhaust and headers.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e3\" diameter system\u003cbr\u003e3\" high-flow catted leads\u003cbr\u003e304 stainless steel construction\u003cbr\u003eTIG welded for strength\u003cbr\u003eMandrel bent (no buckling) for optimal flow\u003cbr\u003eDesign and Made in Chagrin Falls, Ohio, USA\u003cbr\u003e\u003cbr\u003ePerformance and Sound Proudly Made in the USA\u003cbr\u003e\u003cbr\u003eInnovative Design: We take our years of experience, and inject that knowledge into creating performance systems that maximize horsepower, torque and sound. Each system is designed for the specific vehicle with distinct features to get the most performance possible along with great fitment.\u003cbr\u003e\u003cbr\u003eSolid Construction: Made to withstand grueling engine conditions, Stainless Works exhaust and headers are fabricated from 304 stainless steel, which not only resist corrosion, but is stronger than its aluminum or steel counterparts.\u003cbr\u003e\u003cbr\u003eIncreased Power: Factory manifolds can be restrictive and hold back the true potential of your ride. Stainless Works' systems unlock the power of your engine. Our long tube, free-flowing design reduces back pressure, and will bring new found power that you can feel and hear.\u003cbr\u003e\u003cbr\u003eLimited Lifetime Warranty: Stainless Works headers and exhausts are designed to take the punishment of your motor, and are backed by a Limited Lifetime Guarantee on material and workmanship.\u003cbr\u003e\u003cbr\u003eInstall-Ready: We want to make sure installation goes as smoothly as possible, that's why Stainless Works systems come Install-Ready. Whether clamps, O2 extensions, bolts or RTV silicone, our headers and exhausts come with all necessary accessories to make installation as smooth as possible.\u003cbr\u003e\u003cbr\u003eChoose Your Connection: Stainless Works Camaro systems come in two configurations: Factory Connect and Performance Connect.\u003cbr\u003e\u003cbr\u003eFactory Connect allows our headers or exhaust to easily bolt to the factory exhaust or manifolds respectively. They connect at the factory location which is necked-down to accommodate fitment.\u003cbr\u003e\u003cbr\u003ePerformance Connect is designed to take advantage of performance gains not possible with the standard factory connection point. Both SW headers and SW exhaust are used in this configuration. We've developed a system which maintains a full 3\" diameter and X-pipe which creates the ultimate horsepower experience.\u003cbr\u003e\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47221561819394,"sku":"SSWCA16HCAT","price":2845.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/CA16HCAT_1.jpg?v=1784947599"},{"product_id":"stainless-works-hot-rod-box-exhaust-tips-2in-inlet","title":"Stainless Works 1970-72 Corvette Hot Rod Style 2\" Inlet - 7010200","description":"Stainless Works Stainless Works 1970-72 Corvette Hot Rod Style 2\" Inlet - 7010200\u003cbr\u003e\u003cbr\u003ePair of Hot Rod style version of the 1970- 72 Corvette tips, with 2\" ID inlet, 5-3\/4\" x 2-5\/8\" outlet with an overall length of 8\" Can be clamped or welded in place. Made from 304 stainless steel for maximum corrosion resistance. Hand mirror polished finish. The quality of our tips is far superior to the less expensive tips on the market. These are TIG welded for strength and durability. These kits come with a lifetime warranty and proudly made in the USA.\u003cbr\u003e\u003cbr\u003eStainless Works is an industry-leader in stainless steel performance headers and exhaust systems.\u003cbr\u003e\u003cbr\u003eIn addition to designing our wide range of after-market headers and exhausts, we manufacture them on-site, right here in the United States.; We are constantly adding new products for a variety of new car and truck models as well as the classics.; Our systems have proven performance increases through pre and post-dyno testing of vehicles.; Our stainless steel products are made from only the finest materials, and are manufactured with exacting specifications by skilled American craftsmen.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eList Info\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePRODUCT NOTES:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of Stainless Works products!\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853030736130,"sku":"SSW7010200","price":379.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/7010200-1-primary.jpg?v=1784961630"},{"product_id":"stainless-works-70-72-corvette-factory-style-exhaust-tips","title":"Stainless Works 1970-72 Corvette tips 2\" Inlet - 7010200CV","description":"Stainless Works Stainless Works 1970-72 Corvette tips 2\" Inlet - 7010200CV\u003cbr\u003e\u003cbr\u003ePair of Correct version of 1970-72 Corvette tips TIG welded, smoothed and notched. These 5-3\/4\" x 2-3\/4\" outlet, 2\" inlet, and an overall length 8\". Made from 304 stainless steel for maximum corrosion resistance. Hand mirror polished finish. The quality of our tips is far superior to the less expensive tips on the market. These tips come with a lifetime warranty and proudly made in the USA.\u003cbr\u003e\u003cbr\u003eStainless Works is an industry-leader in stainless steel performance headers and exhaust systems.\u003cbr\u003e\u003cbr\u003eIn addition to designing our wide range of after-market headers and exhausts, we manufacture them on-site, right here in the United States.; We are constantly adding new products for a variety of new car and truck models as well as the classics.; Our systems have proven performance increases through pre and post-dyno testing of vehicles.; Our stainless steel products are made from only the finest materials, and are manufactured with exacting specifications by skilled American craftsmen.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eList Info\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePRODUCT NOTES:\u003c\/b\u003e\u003cbr\u003eBrand - Stainless Works\u003cbr\u003eCalifornia Legal - Yes\u003cbr\u003eCategory - Tips\u003cbr\u003eFinish - Polished\u003cbr\u003eInlet Size - 2\u003cbr\u003eLength - 8\u003cbr\u003eMaterial - 304 Stainless Steel\u003cbr\u003eTip Body Size - 2-5\/8 x 5-3\/4\u003cbr\u003eTip Style - Factory Type\u003cbr\u003eTip Type - Single Wall\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of Stainless Works products!\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853031588098,"sku":"SSW7010200CV","price":379.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/7010200cv-1-primary.jpg?v=1784961633"},{"product_id":"stainless-works-hot-rod-box-exhaust-tips-2-25in-inlet","title":"Stainless Works 1970-72 Corvette Hot Rod Style 2-1\/4\" Inlet - 7010225","description":"Stainless Works Stainless Works 1970-72 Corvette Hot Rod Style 2-1\/4\" Inlet - 7010225\u003cbr\u003e\u003cbr\u003ePair of Hot Rod style version of the 1970- 72 Corvette tips, with 2-1\/4\" ID inlet, 5-3\/4\" x 2-5\/8\" outlet with an overall length of 8\" Can be clamped or welded in place. Made from 304 stainless steel for maximum corrosion resistance. Hand mirror polished finish. The quality of our tips is far superior to the less expensive tips on the market. These are TIG welded for strength and durability. These kits come with a lifetime warranty and proudly made in the USA.\u003cbr\u003e\u003cbr\u003eStainless Works is an industry-leader in stainless steel performance headers and exhaust systems.\u003cbr\u003e\u003cbr\u003eIn addition to designing our wide range of after-market headers and exhausts, we manufacture them on-site, right here in the United States.; We are constantly adding new products for a variety of new car and truck models as well as the classics.; Our systems have proven performance increases through pre and post-dyno testing of vehicles.; Our stainless steel products are made from only the finest materials, and are manufactured with exacting specifications by skilled American craftsmen.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eList Info\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePRODUCT NOTES:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of Stainless Works products!\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853031751938,"sku":"SSW7010225","price":379.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/7010225-1-primary.jpg?v=1784961626"},{"product_id":"stainless-works-hot-rod-box-exhaust-tips-2-5in-inlet","title":"Stainless Works 1970-72 Corvette Hot Rod Style 2-1\/2\" Inlet - 7010250","description":"Stainless Works Stainless Works 1970-72 Corvette Hot Rod Style 2-1\/2\" Inlet - 7010250\u003cbr\u003e\u003cbr\u003ePair of Hot Rod style version of the 1970- 72 Corvette tips, with 2-1\/2\" ID inlet, 5-3\/4\" x 2-5\/8\" outlet with an overall length of 8\" Can be clamped or welded in place. Made from 304 stainless steel for maximum corrosion resistance. Hand mirror polished finish. The quality of our tips is far superior to the less expensive tips on the market. These are TIG welded for strength and durability. These kits come with a lifetime warranty and proudly made in the USA.\u003cbr\u003e\u003cbr\u003eStainless Works is an industry-leader in stainless steel performance headers and exhaust systems.\u003cbr\u003e\u003cbr\u003eIn addition to designing our wide range of after-market headers and exhausts, we manufacture them on-site, right here in the United States.; We are constantly adding new products for a variety of new car and truck models as well as the classics.; Our systems have proven performance increases through pre and post-dyno testing of vehicles.; Our stainless steel products are made from only the finest materials, and are manufactured with exacting specifications by skilled American craftsmen.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eList Info\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePRODUCT NOTES:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of Stainless Works products!\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853031817474,"sku":"SSW7010250","price":379.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/7010250-1-primary.jpg?v=1784961630"},{"product_id":"stainless-works-70-72-corvette-factory-style-exhaust-tips-1","title":"Stainless Works 1970-72 Corvette tips 2-1\/2\" Inlet - 7010250CV","description":"Stainless Works Stainless Works 1970-72 Corvette tips 2-1\/2\" Inlet - 7010250CV\u003cbr\u003e\u003cbr\u003ePair of Correct version of 1970-72 Corvette tips TIG welded, smoothed and notched. These 5-3\/4\" x 2-3\/4\" outlet, 2-1\/2\" inlet, and an overall length 8\". Made from 304 stainless steel for maximum corrosion resistance. Hand mirror polished finish. The quality of our tips is far superior to the less expensive tips on the market. These tips come with a lifetime warranty and proudly made in the USA.\u003cbr\u003e\u003cbr\u003eStainless Works is an industry-leader in stainless steel performance headers and exhaust systems.\u003cbr\u003e\u003cbr\u003eIn addition to designing our wide range of after-market headers and exhausts, we manufacture them on-site, right here in the United States.; We are constantly adding new products for a variety of new car and truck models as well as the classics.; Our systems have proven performance increases through pre and post-dyno testing of vehicles.; Our stainless steel products are made from only the finest materials, and are manufactured with exacting specifications by skilled American craftsmen.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eList Info\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePRODUCT NOTES:\u003c\/b\u003e\u003cbr\u003eBrand - Stainless Works\u003cbr\u003eCalifornia Legal - Yes\u003cbr\u003eCategory - Tips\u003cbr\u003eFinish - Polished\u003cbr\u003eInlet Size - 2-1\/2\u003cbr\u003eLength - 8\u003cbr\u003eMaterial - 304 Stainless Steel\u003cbr\u003eTip Body Size - 2-5\/8 x 5-3\/4\u003cbr\u003eTip Style - Factory Type\u003cbr\u003eTip Type - Single Wall\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of Stainless Works products!\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853031981314,"sku":"SSW7010250CV","price":426.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/7010250cv-1-primary.jpg?v=1784961626"},{"product_id":"stainless-works-wide-oval-c4-corvette-2-1-2in-inlet-tips-priced-per-pair","title":"Stainless Works Corvette C4 Wide Oval Tips - 784250","description":"Stainless Works Stainless Works Corvette C4 Wide Oval Tips - 784250\u003cbr\u003e\u003cbr\u003ePair of C4 Corvette Wide oval style tips, with 2-5\/8\" x 9-1\/2\" Oval slash style outlet, 2-1\/2\" ID, 2-3\/4\" long inlet stub, With a body of 5\" long at top and 3\" at bottom. Can be clamped or welded in place. Made from 304 stainless steel for maximum corrosion resistance. Hand mirror polished finish. The quality of our tips is far superior to the less expensive tips on the market. These are TIG welded for strength and durability. These kits come with a lifetime warranty and proudly made in the USA.\u003cbr\u003e\u003cbr\u003eStainless Works is an industry-leader in stainless steel performance headers and exhaust systems.\u003cbr\u003e\u003cbr\u003eIn addition to designing our wide range of after-market headers and exhausts, we manufacture them on-site, right here in the United States.; We are constantly adding new products for a variety of new car and truck models as well as the classics.; Our systems have proven performance increases through pre and post-dyno testing of vehicles.; Our stainless steel products are made from only the finest materials, and are manufactured with exacting specifications by skilled American craftsmen.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eList Info\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePRODUCT NOTES:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of Stainless Works products!\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853036568834,"sku":"SSW784250","price":185.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/784250-1-primary.jpg?v=1784961625"},{"product_id":"stainless-works-wide-oval-zr1-corvette-2-1-2in-dual-inlet-tips-priced-per-pair","title":"Stainless Works Corvette ZR1 Wide Oval Tips - 785250","description":"Stainless Works Stainless Works Corvette ZR1 Wide Oval Tips - 785250\u003cbr\u003e\u003cbr\u003ePair of ZR1 Corvette Wide oval dual inlet style tips, with 2-5\/8\" x 9-1\/2\" Oval slash style outlet, 2-1\/2\" ID, 2\" long inlet stub, With a body of 5\" long at top and 3\" at bottom. Can be clamped or welded in place. Made from 304 stainless steel for maximum corrosion resistance. Hand mirror polished finish. The quality of our tips is far superior to the less expensive tips on the market. These are TIG welded for strength and durability. These kits come with a lifetime warranty and proudly made in the USA.\u003cbr\u003e\u003cbr\u003eStainless Works is an industry-leader in stainless steel performance headers and exhaust systems.\u003cbr\u003e\u003cbr\u003eIn addition to designing our wide range of after-market headers and exhausts, we manufacture them on-site, right here in the United States.; We are constantly adding new products for a variety of new car and truck models as well as the classics.; Our systems have proven performance increases through pre and post-dyno testing of vehicles.; Our stainless steel products are made from only the finest materials, and are manufactured with exacting specifications by skilled American craftsmen.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eList Info\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePRODUCT NOTES:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of Stainless Works products!\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853036634370,"sku":"SSW785250","price":451.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/785250-1-primary.jpg?v=1784961621"},{"product_id":"stainless-works-82-92-sbc-camaro-headers","title":"Stainless Works 82-92 SBC Camaro Headers","description":"Stainless Works 82-92 SBC Camaro Headers","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853041221890,"sku":"SSW829217525C","price":1723.3,"currency_code":"USD","in_stock":true}]},{"product_id":"stainless-works-82-92-sbc-camaro-headers-3-in-slip-fit-collectors","title":"Stainless Works 82-92 SBC Camaro Headers - 3 in Slip-fit Collectors","description":"Stainless Works 82-92 SBC Camaro Headers - 3 in Slip-fit Collectors","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853041287426,"sku":"SSW82921753C","price":1848.7,"currency_code":"USD","in_stock":true}]},{"product_id":"stainless-works-chevy-camaro-1982-92-exhaust-3in-system-w-turndown-tailpipes","title":"Stainless Works Dual Outlet Chambered Muffler Factory Connect (1982-2002 Camaro) - 829239","description":"Stainless Works Stainless Works Dual Outlet Chambered Muffler Factory Connect (1982-2002 Camaro) - 829239\u003cbr\u003e\u003cbr\u003e1982-02 SBC Camaro, Made from 304 stainless steel, for maximum corrosion resistance. All tubes are CNC mandrel bent for optimal flow. 3\" exhaust system, with 2-1\/2\" tails as turn-down tips. All TIG welded for strength and durability. These kits come with a lifetime warranty and proudly made in the USA.\u003cbr\u003e\u003cbr\u003eStainless Works is an industry-leader in stainless steel performance headers and exhaust systems.\u003cbr\u003e\u003cbr\u003eIn addition to designing our wide range of after-market headers and exhausts, we manufacture them on-site, right here in the United States.; We are constantly adding new products for a variety of new car and truck models as well as the classics.; Our systems have proven performance increases through pre and post-dyno testing of vehicles.; Our stainless steel products are made from only the finest materials, and are manufactured with exacting specifications by skilled American craftsmen.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eList Info\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePRODUCT NOTES:\u003c\/b\u003e\u003cbr\u003eActive Exhaust Valves - No\u003cbr\u003eAFM Valves Included - No\u003cbr\u003eBrand - Stainless Works\u003cbr\u003eCalifornia Legal - Yes\u003cbr\u003eCategory - Headers \u0026amp; Exhaust\u003cbr\u003eConnection Point - Factory Connect\u003cbr\u003eExhaust Size - 3\u003cbr\u003eFinish - Mill\u003cbr\u003eMaterial - 304 Stainless Steel\u003cbr\u003eMuffler Style - Dual Outlet\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of Stainless Works products!\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853041352962,"sku":"SSW829239","price":1462.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/829239-1-primary.jpg?v=1784961643"},{"product_id":"stainless-works-1992-96-corvette-lt1-lt4-1-5-8in-primaries-2-1-2in-leads-high-flow-cats","title":"Stainless Works Headers 1-5\/8\" With Catted Leads Factory Connect (1992-1996 Corvette) - C492-96CAT","description":"Stainless Works Stainless Works Headers 1-5\/8\" With Catted Leads Factory Connect (1992-1996 Corvette) - C492-96CAT\u003cbr\u003e\u003cbr\u003e1992-96 Corvette LT1\/LT4 1 5\/8\" Primaries with 2 1\/2\" lead pipes and high flow catalytic converters. Long tube design makes great mid range and top end power, CNC laser cut 3\/8\" stainless flanges, CNC mandrel bent 304 s\/s primary tubes. Fits factory exhaust or Stainless Works exhaust (P\/N C492-96EXH).\u003cbr\u003e\u003cbr\u003eStainless Works is an industry-leader in stainless steel performance headers and exhaust systems.\u003cbr\u003e\u003cbr\u003eIn addition to designing our wide range of after-market headers and exhausts, we manufacture them on-site, right here in the United States.; We are constantly adding new products for a variety of new car and truck models as well as the classics.; Our systems have proven performance increases through pre and post-dyno testing of vehicles.; Our stainless steel products are made from only the finest materials, and are manufactured with exacting specifications by skilled American craftsmen.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eList Info\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePRODUCT NOTES:\u003c\/b\u003e\u003cbr\u003eAir Tubes Included - Yes\u003cbr\u003eBrand - Stainless Works\u003cbr\u003eCalifornia Legal - No\u003cbr\u003eCategory - Headers \u0026amp; Exhaust\u003cbr\u003eCollector Outlet Size - 2-1\/2\u003cbr\u003eConnection Point - Factory Connect\u003cbr\u003eEmissions - High-Flow Cats\u003cbr\u003eFinish - Mill\u003cbr\u003eHeader Type - Long Tube\u003cbr\u003eMaterial - 304 Stainless Steel\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of Stainless Works products!\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853041844482,"sku":"SSWC492-96CAT","price":2560.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/C492-96CAT_1.jpg?v=1784961658"},{"product_id":"stainless-works-1992-96-corvette-c4-lt1-lt4-2-1-2in-exhaust-system-x-pipe-chambered-turbo-mufflers","title":"Stainless Works Catback Dual Turbo Chambered Mufflers Performance Connect (1992-1996 Corvette) - C49296EXH","description":"Stainless Works Stainless Works Catback Dual Turbo Chambered Mufflers Performance Connect (1992-1996 Corvette) - C49296EXH\u003cbr\u003e\u003cbr\u003e1992-96 Corvette C4 LT1\/LT4 2-1\/2\" Exhaust. All tubes are CNC mandrel bent for optimal flow. Made from 304 stainless steel for maximum corrosion resistance. Features x-pipe, chambered turbo mufflers, polished tips and all clamps. These are TIG welded for strength and durability. These kits come with a lifetime warranty and proudly made in the USA.\u003cbr\u003e\u003cbr\u003eStainless Works is an industry-leader in stainless steel performance headers and exhaust systems.\u003cbr\u003e\u003cbr\u003eIn addition to designing our wide range of after-market headers and exhausts, we manufacture them on-site, right here in the United States.; We are constantly adding new products for a variety of new car and truck models as well as the classics.; Our systems have proven performance increases through pre and post-dyno testing of vehicles.; Our stainless steel products are made from only the finest materials, and are manufactured with exacting specifications by skilled American craftsmen.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eList Info\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePRODUCT NOTES:\u003c\/b\u003e\u003cbr\u003eActive Exhaust Valves - No\u003cbr\u003eAFM Valves Included - No\u003cbr\u003eBrand - Stainless Works\u003cbr\u003eCalifornia Legal - Yes\u003cbr\u003eCategory - Headers \u0026amp; Exhaust\u003cbr\u003eConnection Point - Factory Connect\u003cbr\u003eCrossover Style - X-Pipe\u003cbr\u003eExhaust Size - 2-1\/2\u003cbr\u003eFinish - Mill\u003cbr\u003eMaterial - 304 Stainless Steel\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of Stainless Works products!\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853042139394,"sku":"SSWC49296EXH","price":1946.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/C49296EXH_1.jpg?v=1784961650"},{"product_id":"stainless-works-1992-96-lt1-lt4-corvette-2-1-2in-exhaust-system-x-pipe-turbo-s-tube-mufflers-tips","title":"Stainless Works Catback Dual Turbo S-Tube Mufflers Performance Connect (1992-1996 Corvette) - C49296EXHLMF","description":"Stainless Works Stainless Works Catback Dual Turbo S-Tube Mufflers Performance Connect (1992-1996 Corvette) - C49296EXHLMF\u003cbr\u003e\u003cbr\u003e1992-96 LT1\/LT4 Corvette - 2-1\/2\" stainless steel exhaust system with X-Pipe, turbo S-Tube mufflers, polished tips \u0026amp; all clamps - fits factory connection point for use with factory manifolds or Stainless Works Factory Connect headers.\u003cbr\u003e\u003cbr\u003eStainless Works is an industry-leader in stainless steel performance headers and exhaust systems.\u003cbr\u003e\u003cbr\u003eIn addition to designing our wide range of after-market headers and exhausts, we manufacture them on-site, right here in the United States.; We are constantly adding new products for a variety of new car and truck models as well as the classics.; Our systems have proven performance increases through pre and post-dyno testing of vehicles.; Our stainless steel products are made from only the finest materials, and are manufactured with exacting specifications by skilled American craftsmen.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eList Info\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePRODUCT NOTES:\u003c\/b\u003e\u003cbr\u003eActive Exhaust Valves - No\u003cbr\u003eAFM Valves Included - No\u003cbr\u003eBrand - Stainless Works\u003cbr\u003eCalifornia Legal - Yes\u003cbr\u003eCategory - Headers \u0026amp; Exhaust\u003cbr\u003eConnection Point - Factory Connect\u003cbr\u003eCrossover Style - X-Pipe\u003cbr\u003eExhaust Size - 2-1\/2\u003cbr\u003eFinish - Mill\u003cbr\u003eMaterial - 304 Stainless Steel\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of Stainless Works products!\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853042204930,"sku":"SSWC49296EXHLMF","price":1946.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/C49296EXHLMF_1.jpg?v=1784961650"},{"product_id":"stainless-works-2001-04-c5-corvette-1-7-8in-headers-3in-x-pipe-high-flow-cats","title":"Stainless Works Headers 1-7\/8\" With Catted Leads Factory Connect (2001-2004 Corvette) - C5LS103CATBT","description":"Stainless Works Stainless Works Headers 1-7\/8\" With Catted Leads Factory Connect (2001-2004 Corvette) - C5LS103CATBT\u003cbr\u003e\u003cbr\u003e2001-04 C5 Corvette 1 7\/8\" headers and 3\" center section with x pipe and high flow converters. Bolt on installation with no cutting and welding required. Manufactured from 304 Stainless, the headers feature 3\/8\" thick, CNC laser cut flanges, and CNC mandrel bent 1 7\/8\" primary tubes. The headers are completely tig welded together, and have the AIR tubes and Oxygen sensors bungs installed. The headers have shown gains of 40+ rear wheel horsepower on highly modified engines. The 1 7\/8\" headers are perfect for large cubic inch, forced induction, or nitrous oxide applications. Also available as part #C5LS103BT as headers only, or C5LS103ORBT with off road 3\" x pipe.\u003cbr\u003e\u003cbr\u003eStainless Works is an industry-leader in stainless steel performance headers and exhaust systems.\u003cbr\u003e\u003cbr\u003eIn addition to designing our wide range of after-market headers and exhausts, we manufacture them on-site, right here in the United States.; We are constantly adding new products for a variety of new car and truck models as well as the classics.; Our systems have proven performance increases through pre and post-dyno testing of vehicles.; Our stainless steel products are made from only the finest materials, and are manufactured with exacting specifications by skilled American craftsmen.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eList Info\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePRODUCT NOTES:\u003c\/b\u003e\u003cbr\u003eAir Tubes Included - Yes\u003cbr\u003eBrand - Stainless Works\u003cbr\u003eCalifornia Legal - No\u003cbr\u003eCategory - Headers \u0026amp; Exhaust\u003cbr\u003eCollector Outlet Size - 3\u003cbr\u003eConnection Point - Factory Connect\u003cbr\u003eCrossover Style - X-Pipe\u003cbr\u003eEmissions - High-Flow Cats\u003cbr\u003eFinish - Mill\u003cbr\u003eHeader Type - Long Tube\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of Stainless Works products!\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853042270466,"sku":"SSWC5LS103CATBT","price":2968.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/C5LS103CATBT_1.jpg?v=1784961651"},{"product_id":"stainless-works-1997-00-c5-corvette-1-7-8in-headers-3in-x-pipe-high-flow-cats","title":"Stainless Works Headers 1-7\/8\" With Catted Leads Factory Connect (1997-2000 Corvette) - C5LS178CAT","description":"Stainless Works Stainless Works Headers 1-7\/8\" With Catted Leads Factory Connect (1997-2000 Corvette) - C5LS178CAT\u003cbr\u003e\u003cbr\u003e1997-00 C5 Corvette 1 7\/8\" headers and 3\" center section with x pipe and high flow converters. Bolt on installation with no cutting and welding required. Manufactured from 304 Stainless, the headers feature 3\/8\" thick, CNC laser cut flanges, and CNC mandrel bent 1 7\/8\" primary tubes. The headers are completely tig welded together, and have the AIR tubes and Oxygen sensors installed. The headers have shown gains of 40+ rear wheel horsepower on highly modified engines. The 1 7\/8\" headers are perfect for large cubic inch, forced induction, or nitrous oxide applications. Also available as part #C5LS178 as headers only, or C5LS178OR with 3\" connector pipes and x pipe.\u003cbr\u003e\u003cbr\u003eStainless Works is an industry-leader in stainless steel performance headers and exhaust systems.\u003cbr\u003e\u003cbr\u003eIn addition to designing our wide range of after-market headers and exhausts, we manufacture them on-site, right here in the United States.; We are constantly adding new products for a variety of new car and truck models as well as the classics.; Our systems have proven performance increases through pre and post-dyno testing of vehicles.; Our stainless steel products are made from only the finest materials, and are manufactured with exacting specifications by skilled American craftsmen.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eList Info\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePRODUCT NOTES:\u003c\/b\u003e\u003cbr\u003eAir Tubes Included - Yes\u003cbr\u003eBrand - Stainless Works\u003cbr\u003eCalifornia Legal - No\u003cbr\u003eCategory - Headers \u0026amp; Exhaust\u003cbr\u003eCollector Outlet Size - 3\u003cbr\u003eConnection Point - Factory Connect\u003cbr\u003eCrossover Style - X-Pipe\u003cbr\u003eEmissions - High-Flow Cats\u003cbr\u003eFinish - Mill\u003cbr\u003eHeader Type - Long Tube\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of Stainless Works products!\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853042336002,"sku":"SSWC5LS178CAT","price":2968.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/C5LS178CAT_1.jpg?v=1784961647"},{"product_id":"stainless-works-chevy-corvette-2005-08-headers-1-7-8in-primaries-x-pipe-with-converters","title":"Stainless Works Headers 1-7\/8\" With Catted Leads Factory Connect (2005-2008 Corvette) - C605178HCAT","description":"Stainless Works Stainless Works Headers 1-7\/8\" With Catted Leads Factory Connect (2005-2008 Corvette) - C605178HCAT\u003cbr\u003e\u003cbr\u003e2005-08 Chevy C6 Corvette headers, 1-7\/8\" Primaries. All tubes are CNC mandrel bent for optimal flow. Made from 304 stainless steel for maximum corrosion resistance. 3\/8\" thick CNC laser cut flanges. Headers flow into high-flow catalytic converters into 3\" x-pipe and center section. Long tube design makes great power and fits undercarriage perfectly. They come with O2 extensions, Stainless steel clamps, also comes with oil cooler lines, compression fittings, zip ties, cable clamps, etc. Fits factory 2.5\" dia. Axle-back connection point. Mill finish, All TIG welded for strength and durability. These kits come with a lifetime warranty and proudly made in the USA.\u003cbr\u003e\u003cbr\u003eStainless Works is an industry-leader in stainless steel performance headers and exhaust systems.\u003cbr\u003e\u003cbr\u003eIn addition to designing our wide range of after-market headers and exhausts, we manufacture them on-site, right here in the United States.; We are constantly adding new products for a variety of new car and truck models as well as the classics.; Our systems have proven performance increases through pre and post-dyno testing of vehicles.; Our stainless steel products are made from only the finest materials, and are manufactured with exacting specifications by skilled American craftsmen.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eList Info\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePRODUCT NOTES:\u003c\/b\u003e\u003cbr\u003eAir Tubes Included - No\u003cbr\u003eBrand - Stainless Works\u003cbr\u003eCalifornia Legal - No\u003cbr\u003eCategory - Headers \u0026amp; Exhaust\u003cbr\u003eCollector Outlet Size - 3\u003cbr\u003eConnection Point - Factory Connect\u003cbr\u003eCrossover Style - X-Pipe\u003cbr\u003eEmissions - High-Flow Cats\u003cbr\u003eFinish - Mill\u003cbr\u003eHeader Type - Long Tube\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of Stainless Works products!\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853042401538,"sku":"SSWC605178HCAT","price":2968.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/c605178hcat-1-primary.jpg?v=1784961652"},{"product_id":"stainless-works-chevy-corvette-2005-08-headers-2in-primaries-x-pipe-with-converters","title":"Stainless Works Headers 2\" With Catted Leads Factory Connect (2005-2008 Corvette) - C6052HCAT","description":"Stainless Works Stainless Works Headers 2\" With Catted Leads Factory Connect (2005-2008 Corvette) - C6052HCAT\u003cbr\u003e\u003cbr\u003e2005-08 Chevy C6 Corvette headers, 2\" Primaries. All tubes are CNC mandrel bent for optimal flow. Made from 304 stainless steel for maximum corrosion resistance. 3\/8\" thick CNC laser cut flanges. Headers flow into high-flow catalytic converters into 3\" x-pipe and center section. Long tube design makes great power and fits undercarriage perfectly. They come with O2 extensions, Stainless steel clamps, also comes with oil cooler lines, compression fittings, zip ties, cable clamps, etc. Fits factory 2.5\" dia. Axle-back connection point. Mill finish, All TIG welded for strength and durability. These kits come with a lifetime warranty and proudly made in the USA.\u003cbr\u003e\u003cbr\u003eStainless Works is an industry-leader in stainless steel performance headers and exhaust systems.\u003cbr\u003e\u003cbr\u003eIn addition to designing our wide range of after-market headers and exhausts, we manufacture them on-site, right here in the United States.; We are constantly adding new products for a variety of new car and truck models as well as the classics.; Our systems have proven performance increases through pre and post-dyno testing of vehicles.; Our stainless steel products are made from only the finest materials, and are manufactured with exacting specifications by skilled American craftsmen.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eList Info\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePRODUCT NOTES:\u003c\/b\u003e\u003cbr\u003eAir Tubes Included - No\u003cbr\u003eBrand - Stainless Works\u003cbr\u003eCalifornia Legal - No\u003cbr\u003eCategory - Headers \u0026amp; Exhaust\u003cbr\u003eCollector Outlet Size - 3\u003cbr\u003eConnection Point - Factory Connect\u003cbr\u003eCrossover Style - X-Pipe\u003cbr\u003eEmissions - High-Flow Cats\u003cbr\u003eFinish - Mill\u003cbr\u003eHeader Type - Long Tube\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of Stainless Works products!\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853042467074,"sku":"SSWC6052HCAT","price":2968.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/c6052hcat-1-primary.jpg?v=1784961658"},{"product_id":"stainless-works-05-08-chevrolet-corvette-c6-2-5in-axle-back-exhaust-system","title":"Stainless Works Axleback Dual Turbo Chambered Mufflers Factory Connect (2005-2008 Corvette) - C605CBQUAD","description":"Stainless Works Stainless Works Axleback Dual Turbo Chambered Mufflers Factory Connect (2005-2008 Corvette) - C605CBQUAD\u003cbr\u003e\u003cbr\u003e2005-08 Chevy C6 Corvette axle-back 2-1\/2\" exhaust system. All tubes are CNC mandrel bent for optimal flow. Made from 304 stainless steel for maximum corrosion resistance. Dual chambered turbo mufflers and Quad 4\" slash cut conical double wall polished tips.  Includes all clamps and hangers.  Mates to factory slip joint in front of the rear axle. Mill finish, All TIG welded for strength and durability. These kits come with a lifetime warranty and proudly made in the USA.\u003cbr\u003e\u003cbr\u003eStainless Works is an industry-leader in stainless steel performance headers and exhaust systems.\u003cbr\u003e\u003cbr\u003eIn addition to designing our wide range of after-market headers and exhausts, we manufacture them on-site, right here in the United States.; We are constantly adding new products for a variety of new car and truck models as well as the classics.; Our systems have proven performance increases through pre and post-dyno testing of vehicles.; Our stainless steel products are made from only the finest materials, and are manufactured with exacting specifications by skilled American craftsmen.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eList Info\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePRODUCT NOTES:\u003c\/b\u003e\u003cbr\u003eActive Exhaust Valves - No\u003cbr\u003eBrand - Stainless Works\u003cbr\u003eCalifornia Legal - Yes\u003cbr\u003eCategory - Headers \u0026amp; Exhaust\u003cbr\u003eConnection Point - Factory Connect\u003cbr\u003eExhaust Size - 2-1\/2\u003cbr\u003eFabrication Required - Yes\u003cbr\u003eFinish - Mill\u003cbr\u003eMaterial - 304 Stainless Steel\u003cbr\u003eMuffler Style - Turbo Chambered\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of Stainless Works products!\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853042532610,"sku":"SSWC605CBQUAD","price":1895.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/c605cbquad-1-primary.jpg?v=1784961654"},{"product_id":"stainless-works-2009-13-c6-corvette-headers-1-7-8in-primaries-3in-collectors-x-pipe-high-flow-cats","title":"Stainless Works C609178HCAT 2009-2013 Chevrolet Corvette C6 1-7\/8\" Longtube Headers with Cats (Factory Connect)","description":"2009-13 C6 Corvette Headers with 1-7\/8\" dia. 31\" long primaries and 3\" slip fit collectors. Includes 3\" X-pipe, metallic substrate high flow converters, O2 extensions, Accuseal clamps, oil cooler lines, compression fittings, zip ties, cable clamps, etc. Fits factory 2.5\" dia. axleback connection point.\u003cbr\u003e\u003cbr\u003e2009-13 C6 Corvette Headers with with 31\" long primaries and 3\" slip fit collectors. Includes 3\" X-pipe, O2 extensions, Accuseal clamps, oil cooler lines, compression fittings, zip ties, cable clamps, etc.\u003cbr\u003e\u003cbr\u003eChoose between 2\" and 1-7\/8\" diameter primaries, as well as high-flow cats and off-road pipes for your system lead pipes.\u003cbr\u003e\u003cbr\u003eFits factory axleback connection point or Stainless Works 2.5\" diameter axleback.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e2009-2013 Chevy Corvette C6 Header \u0026amp; Exhaust Systems\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eGive your C6 Corvette a boost of horsepower and sound with Stainless Works. 2009-13 C6 Corvette headers and axleback exhaust from Stainless Works. Our headers are available in both 2\" and 1-7\/8\" diameter primaries, and your choice of high-flow catted or off-road leads. Our headers include our 3\" X-pipe and all necessary clamps, cables etc. Our C6 axleback exhaust system is 2-1\/2\", CNC mandrel bent with dual chambered turbo mufflers and Quad 4\" slash cut conical double wall polished tips. Includes all clamps and hangers. Stainless Works performance exhausts and headers are proudly made in the USA and come with a lifetime warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003cbr\u003e• 304L Stainless Steel USA Sourced\u003cbr\u003e• Fully tig-welded \u0026amp; CNC mandrel bends\u003cbr\u003e• Lifetime guarantee on materials and workmanship\u003cbr\u003e• Optional Factory connect or performance connect\u003cbr\u003e• Includes all necessary hardware for installation\u003cbr\u003e\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853042598146,"sku":"SSWC609178HCAT","price":2968.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/C609178HCAT_1.jpg?v=1784961656"},{"product_id":"stainless-works-2009-13-c6-corvette-headers-2in-primaries-3in-collectors-3in-x-pipe-high-flow-cats","title":"Stainless Works C6092HCAT 2009-2013 Chevrolet Corvette C6 2\" Longtube Headers with Cats (Factory Connect)","description":"2009-13 C6 Corvette Headers with 2\" dia. 31\" long primaries and 3\" slip fit collectors. Includes 3\" X-pipe, metallic substrate high flow converters, O2 extensions, Accuseal clamps, oil cooler lines, compression fittings, zip ties, cable clamps, etc. Fits factory 2.5\" dia. axleback connection point.\u003cbr\u003e\u003cbr\u003e2009-13 C6 Corvette Headers with with 31\" long primaries and 3\" slip fit collectors. Includes 3\" X-pipe, O2 extensions, Accuseal clamps, oil cooler lines, compression fittings, zip ties, cable clamps, etc.\u003cbr\u003e\u003cbr\u003eChoose between 2\" and 1-7\/8\" diameter primaries, as well as high-flow cats and off-road pipes for your system lead pipes.\u003cbr\u003e\u003cbr\u003eFits factory axleback connection point or Stainless Works 2.5\" diameter axleback.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e2009-2013 Chevy Corvette C6 Header \u0026amp; Exhaust Systems\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eGive your C6 Corvette a boost of horsepower and sound with Stainless Works. 2009-13 C6 Corvette headers and axleback exhaust from Stainless Works. Our headers are available in both 2\" and 1-7\/8\" diameter primaries, and your choice of high-flow catted or off-road leads. Our headers include our 3\" X-pipe and all necessary clamps, cables etc. Our C6 axleback exhaust system is 2-1\/2\", CNC mandrel bent with dual chambered turbo mufflers and Quad 4\" slash cut conical double wall polished tips. Includes all clamps and hangers. Stainless Works performance exhausts and headers are proudly made in the USA and come with a lifetime warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003cbr\u003e• 304L Stainless Steel USA Sourced\u003cbr\u003e• Fully tig-welded \u0026amp; CNC mandrel bends\u003cbr\u003e• Lifetime guarantee on materials and workmanship\u003cbr\u003e• Optional Factory connect or performance connect\u003cbr\u003e• Includes all necessary hardware for installation\u003cbr\u003e\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853042663682,"sku":"SSWC6092HCAT","price":2968.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/C6092HCAT_1.jpg?v=1784961656"},{"product_id":"stainless-works-2009-13-c6-corvette-axle-back-2-1-2in-dual-chambered-turbo-mufflers-quad-4in-tips","title":"Stainless Works C609CBQUAD 2009-2013 Chevrolet Corvette C6 2.5\" Axleback Exhaust (Factory Connect)","description":"2009-13 C6 Corvette axle back 2-1\/2\" exhaust system, CNC mandrel bent with dual chambered turbo mufflers and Quad 4\" slash cut conical double wall polished tips. Includes all clamps and hangers. Mates to factory slip joint in front of the rear axle.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e2009-2013 Chevy Corvette C6 Header \u0026amp; Exhaust Systems\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eGive your C6 Corvette a boost of horsepower and sound with Stainless Works. 2009-13 C6 Corvette headers and axleback exhaust from Stainless Works. Our headers are available in both 2\" and 1-7\/8\" diameter primaries, and your choice of high-flow catted or off-road leads. Our headers include our 3\" X-pipe and all necessary clamps, cables etc. Our C6 axleback exhaust system is 2-1\/2\", CNC mandrel bent with dual chambered turbo mufflers and Quad 4\" slash cut conical double wall polished tips. Includes all clamps and hangers. Stainless Works performance exhausts and headers are proudly made in the USA and come with a lifetime warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003cbr\u003e• 304L Stainless Steel USA Sourced\u003cbr\u003e• Fully tig-welded \u0026amp; CNC mandrel bends\u003cbr\u003e• Lifetime guarantee on materials and workmanship\u003cbr\u003e• Optional Factory connect or performance connect\u003cbr\u003e• Includes all necessary hardware for installation\u003cbr\u003e\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853042729218,"sku":"SSWC609CBQUAD","price":1895.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/C609CBQUAD_1.jpg?v=1784961658"},{"product_id":"stainless-works-20-21-chevrolet-corvette-c8-6-2l-header-kit-1-7-8in-primaries-3in-collectors","title":"Stainless Works 2020-21 Corvette C8 1-7\/8\" Header Kit (2020-2025 Corvette) - C8188H","description":"Stainless Works 2020-21 Corvette C8 1-7\/8\" Header Kit (2020-2021 Corvette) - C8188H\u003cbr\u003e\u003cbr\u003eImprove the sound and performance on your Corvette with premium headers from Stainless Works. American-Made and designed for the 2020-21 Corvette C8 6.2L, these headers feature 1-7\/8\" primary tubes that are CNC mandrel bent to increase air flow, and engineered to create power. These headers come with 3\" collectors welded to a flange for easy connection to the stock catalytic converters or Stainless Works mid pipe kit.\nStainless Works Header Kits are built from corrosion resistant 304 stainless steel, our headers are TIG welded for strength and durability at our state-of-the-art facility in Streetsboro, Ohio. We stand by our products with a lifetime warranty on material and craftsmanship, and as always, our products are proudly made in the USA.\nFeatures:  \n\nDyno Tested And Gained 16HP Without A Tune\n1-7\/8\" Primary Tubes\n3\" Collector With Flange\nSmooth mandrel bends optimize exhaust flow  \nFully TIG welded for strength and beauty   \n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853042794754,"sku":"SSWC8188H","price":1757.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/c8188h-1-primary.jpg?v=1784961658"},{"product_id":"stainless-works-20-21-chevrolet-corvette-c8-6-2l-header-kit-2in-primaries-3in-collectors","title":"Stainless Works 2020-21 Corvette C8 2\" Header Kit (2020-2025 Corvette) - C82H","description":"Stainless Works 2020-21 Corvette C8 2\" Header Kit (2020-2021 Corvette) - C82H\u003cbr\u003e\u003cbr\u003eImprove the sound and performance on your Corvette with premium headers from Stainless Works. American-Made and designed for the 2020-21 Corvette C8 6.2L, these headers feature 2\" primary tubes that are CNC mandrel bent to increase air flow, and engineered to create power. These headers come with 3\" collectors welded to a flange for easy connection to the stock catalytic converters or Stainless Works mid pipe kit.\nStainless Works Header Kits are built from corrosion resistant 304 stainless steel, our headers are TIG welded for strength and durability at our state-of-the-art facility in Streetsboro, Ohio. We stand by our products with a lifetime warranty on material and craftsmanship, and as always, our products are proudly made in the USA.\nFeatures:  \n\n2\" Primary Tubes\n3\" Collector With Flange\nSmooth mandrel bends optimize exhaust flow  \nFully TIG welded for strength and beauty   \n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853042860290,"sku":"SSWC82H","price":1757.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/c82h-1-primary.jpg?v=1784961662"},{"product_id":"stainless-works-20-21-chevrolet-corvette-c8-6-2l-legend-cat-back-exhaust-w-polished-tips","title":"Stainless Works 2020-21 Corvette C8 Legend Exhaust System (2020-2025 Corvette) - C8CBL","description":"Stainless Works 2020-21 Corvette C8 Legend Exhaust System (2020-2021 Corvette) - C8CBL\u003cbr\u003e\u003cbr\u003eImprove the sound and performance on your 2020-21 Corvette C8 with this Legend sound catback from Stainless Works. We've engineered a drone free aggressive muffler tuned specifically for the 6.2L engine. This system features an X-pipe, tuned mufflers and quad 4-1\/2\" polished slash-cut double wall tips. Designed to fit to Stainless Works Midpipes or the stock manifolds and cats.\nThis system includes high flowing 3\" valve replacements for the AFM and Mode Switching electronics. Your Corvette will retain all valve functionality of the stock exhaust but with increased flow and improved sound.\nOur Legend series is designed to create our signature growl, increase volume over stock, yet maintain a comfortable cabin environment. We design Legend systems with the daily-driver in mind, improved tone with restrained loudness. A system that still gets the blood flowing, but allows for a comfortable ride.\nStainless Works Kits are built from corrosion resistant 304 stainless steel, our headers are TIG welded for strength and durability at our state-of-the-art facility in Streetsboro, Ohio. We stand by our products with a lifetime warranty on material and craftsmanship, and as always, our products are proudly made in the USA.\nFeatures:  \n  \nLegend Sound\nQuad Polished Slash Cut Tips\nRetains All Valve Functionality With Improved Exhaust Flow     \nSmooth Mandrel Bends Optimize Exhaust Flow  \nFully TIG Welded For Strength And Beauty\n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853042925826,"sku":"SSWC8CBL","price":3985.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/c8cbl-1-primary.jpg?v=1784961660"},{"product_id":"stainless-works-20-21-chevrolet-corvette-c8-6-2l-legend-cat-back-exhaust-w-matte-black-tips","title":"Stainless Works 2020-21 Corvette C8 Legend Exhaust System (2020-2025 Corvette) - C8CBL-B","description":"Stainless Works 2020-21 Corvette C8 Legend Exhaust System (2020-2021 Corvette) - C8CBL-B\u003cbr\u003e\u003cbr\u003eImprove the sound and performance on your 2020-21 Corvette C8 with this Legend sound catback from Stainless Works. We've engineered a drone free aggressive muffler tuned specifically for the 6.2L engine. This system features an X-pipe, tuned mufflers and quad 4-1\/2\" matte black slash-cut double wall tips. Designed to fit to Stainless Works Midpipes or the stock manifolds and cats.\nThis system includes high flowing 3\" valve replacements for the AFM and Mode Switching electronics. Your Corvette will retain all valve functionality of the stock exhaust but with increased flow and improved sound.\nOur Legend series is designed to create our signature growl, increase volume over stock, yet maintain a comfortable cabin environment. We design Legend systems with the daily-driver in mind, improved tone with restrained loudness. A system that still gets the blood flowing, but allows for a comfortable ride.\nStainless Works Kits are built from corrosion resistant 304 stainless steel, our headers are TIG welded for strength and durability at our state-of-the-art facility in Streetsboro, Ohio. We stand by our products with a lifetime warranty on material and craftsmanship, and as always, our products are proudly made in the USA.\nFeatures:  \n  \nLegend Sound\nQuad Matte Black Slash Cut Tips\nRetains All Valve Functionality With Improved Exhaust Flow     \nSmooth Mandrel Bends Optimize Exhaust Flow  \nFully TIG Welded For Strength And Beauty\n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853042991362,"sku":"SSWC8CBL-B","price":4175.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/c8cbl-b-1-primary.jpg?v=1784961655"},{"product_id":"stainless-works-20-21-chevrolet-corvette-c8-6-2l-redline-cat-back-exhaust-w-polished-tips","title":"Stainless Works 2020-21 Corvette C8 Redline Exhaust System (2020-2025 Corvette) - C8CBR","description":"Stainless Works 2020-21 Corvette C8 Redline Exhaust System (2020-2021 Corvette) - C8CBR\u003cbr\u003e\u003cbr\u003eImprove the sound and performance on your 2020-21 Corvette C8 with this Redline sound catback from Stainless Works. We've engineered a drone free aggressive muffler tuned specifically for the 6.2L engine. This system features an X-pipe, tuned mufflers and quad 4-1\/2\" polished slash-cut double wall tips. Designed to fit to Stainless Works Midpipes or the stock manifolds and cats.\nThis system includes high flowing 3\" valve replacements for the AFM and Mode Switching electronics. Your Corvette will retain all valve functionality of the stock exhaust but with increased flow and improved sound.\nOur Redline series is designed to get the most aggressive sound out of your ride. We design Redline systems to maximize the volume and tone of the engine, while still eliminating any drone in the cabin. Resulting in a feeling that will make you want to high-five your friends in the face.\nStainless Works Kits are built from corrosion resistant 304 stainless steel, our headers are TIG welded for strength and durability at our state-of-the-art facility in Streetsboro, Ohio. We stand by our products with a lifetime warranty on material and craftsmanship, and as always, our products are proudly made in the USA.\nFeatures:  \n  \nRedline Sound\nQuad Polished Slash Cut Tips\nRetains All Valve Functionality With Improved Exhaust Flow     \nSmooth Mandrel Bends Optimize Exhaust Flow  \nFully TIG Welded For Strength And Beauty\n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853043056898,"sku":"SSWC8CBR","price":3985.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/c8cbr-1-primary.jpg?v=1784961664"},{"product_id":"stainless-works-20-21-chevrolet-corvette-c8-6-2l-redline-cat-back-exhaust-w-matte-black-tips","title":"Stainless Works 2020-21 Corvette C8 Redline Exhaust System (2020-2025 Corvette) - C8CBR-B","description":"Stainless Works 2020-21 Corvette C8 Redline Exhaust System (2020-2021 Corvette) - C8CBR-B\u003cbr\u003e\u003cbr\u003eImprove the sound and performance on your 2020-21 Corvette C8 with this Redline sound catback from Stainless Works. We've engineered a drone free aggressive muffler tuned specifically for the 6.2L engine. This system features an X-pipe, tuned mufflers and quad 4-1\/2\" matte black slash-cut double wall tips. Designed to fit to Stainless Works Midpipes or the stock manifolds and cats.\nThis system includes high flowing 3\" valve replacements for the AFM and Mode Switching electronics. Your Corvette will retain all valve functionality of the stock exhaust but with increased flow and improved sound.\nOur Redline series is designed to get the most aggressive sound out of your ride. We design Redline systems to maximize the volume and tone of the engine, while still eliminating any drone in the cabin. Resulting in a feeling that will make you want to high-five your friends in the face.\nStainless Works Kits are built from corrosion resistant 304 stainless steel, our headers are TIG welded for strength and durability at our state-of-the-art facility in Streetsboro, Ohio. We stand by our products with a lifetime warranty on material and craftsmanship, and as always, our products are proudly made in the USA.\nFeatures:  \n  \nRedline Sound\nQuad Matte Black Slash Cut Tips\nRetains All Valve Functionality With Improved Exhaust Flow     \nSmooth Mandrel Bends Optimize Exhaust Flow  \nFully TIG Welded For Strength And Beauty\n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853043122434,"sku":"SSWC8CBR-B","price":4175.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/c8cbr-b-1-primary.jpg?v=1784961663"},{"product_id":"stainless-works-chevy-camaro-firebird-2000-02-exhaust-catted","title":"Stainless Works Catted Y-Pipe For Factory Manifolds (2000-2002 Firebird,2000-2002 Camaro) - CA0002DC","description":"Stainless Works Stainless Works Catted Y-Pipe For Factory Manifolds (2000-2002 Firebird,2000-2002 Camaro) - CA0002DC\u003cbr\u003e\u003cbr\u003e2000-02 F-Body, LS1, Made from 304 stainless steel, for maximum corrosion resistance. All tubes are CNC mandrel bent for optimal flow. 2-1\/2\" stainless steel. Designed to fit factory manifolds and shorty aftermarket headers using factory y-pipes. Includes dual high flow catalytic converters. All TIG welded for strength and durability. These kits come with a lifetime warranty and proudly made in the USA.\u003cbr\u003e\u003cbr\u003eStainless Works is an industry-leader in stainless steel performance headers and exhaust systems.\u003cbr\u003e\u003cbr\u003eIn addition to designing our wide range of after-market headers and exhausts, we manufacture them on-site, right here in the United States.; We are constantly adding new products for a variety of new car and truck models as well as the classics.; Our systems have proven performance increases through pre and post-dyno testing of vehicles.; Our stainless steel products are made from only the finest materials, and are manufactured with exacting specifications by skilled American craftsmen.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eList Info\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePRODUCT NOTES:\u003c\/b\u003e\u003cbr\u003eActive Exhaust Valves - No\u003cbr\u003eAFM Valves Included - No\u003cbr\u003eBrand - Stainless Works\u003cbr\u003eCalifornia Legal - No\u003cbr\u003eCategory - Headers \u0026amp; Exhaust\u003cbr\u003eConnection Point - Factory Connect\u003cbr\u003eCrossover Style - Y-Pipe\u003cbr\u003eEmissions - High-Flow Cats\u003cbr\u003eExhaust Size - 2-1\/2\u003cbr\u003eFinish - Mill\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of Stainless Works products!\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853043187970,"sku":"SSWCA0002DC","price":783.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/ca0002dc-1-primary.jpg?v=1784961658"},{"product_id":"stainless-works-chevy-camaro-firebird-2000-headers-catted-y-pipe","title":"Stainless Works Headers 1-3\/4\" With Catted Leads Factory Connect (2000-2000 Firebird,2000-2000 Camaro) - CA00CAT","description":"Stainless Works Stainless Works Headers 1-3\/4\" With Catted Leads Factory Connect (2000-2000 Firebird,2000-2000 Camaro) - CA00CAT\u003cbr\u003e\u003cbr\u003e2000 LS1 Camaro, Firebird Made from 304 stainless steel, for maximum corrosion resistance. All tubes are CNC mandrel bent for optimal flow.1-3\/4\" primaries with 2-1\/2\" y-pipe and high flow catalytic converters. All TIG welded for strength and durability. These kits come with a lifetime warranty and proudly made in the USA.\u003cbr\u003e\u003cbr\u003eStainless Works is an industry-leader in stainless steel performance headers and exhaust systems.\u003cbr\u003e\u003cbr\u003eIn addition to designing our wide range of after-market headers and exhausts, we manufacture them on-site, right here in the United States.; We are constantly adding new products for a variety of new car and truck models as well as the classics.; Our systems have proven performance increases through pre and post-dyno testing of vehicles.; Our stainless steel products are made from only the finest materials, and are manufactured with exacting specifications by skilled American craftsmen.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eList Info\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePRODUCT NOTES:\u003c\/b\u003e\u003cbr\u003eAir Tubes Included - No\u003cbr\u003eBrand - Stainless Works\u003cbr\u003eCalifornia Legal - No\u003cbr\u003eCategory - Headers \u0026amp; Exhaust\u003cbr\u003eCollector Outlet Size - 2-1\/2\u003cbr\u003eConnection Point - Factory Connect\u003cbr\u003eCrossover Style - Y-Pipe\u003cbr\u003eEmissions - High-Flow Cats\u003cbr\u003eFinish - Mill\u003cbr\u003eHeader Type - Long Tube\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of Stainless Works products!\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853043220738,"sku":"SSWCA00CAT","price":2275.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/ca00cat-1-primary.jpg?v=1784961657"},{"product_id":"stainless-works-chevy-camaro-firebird-2001-2002-headers-catted-y-pipe","title":"Stainless Works Headers 1-3\/4\" With Catted Leads Factory Connect (2001-2002 Camaro,2001-2002 Firebird) - CA0102CAT","description":"Stainless Works Stainless Works Headers 1-3\/4\" With Catted Leads Factory Connect (2001-2002 Camaro,2001-2002 Firebird) - CA0102CAT\u003cbr\u003e\u003cbr\u003e2001-02 LS1 Chevy Camaro, Firebird long tube headers with 1-3\/4\" primaries. Made from 304 stainless steel, for maximum corrosion resistance. All tubes are CNC mandrel bent for optimal flow, high flow catalytic converters, with 2-1\/2\" y-pipe. All TIG welded for strength and durability. These kits come with a lifetime warranty and proudly made in the USA.\u003cbr\u003e\u003cbr\u003eStainless Works is an industry-leader in stainless steel performance headers and exhaust systems.\u003cbr\u003e\u003cbr\u003eIn addition to designing our wide range of after-market headers and exhausts, we manufacture them on-site, right here in the United States.; We are constantly adding new products for a variety of new car and truck models as well as the classics.; Our systems have proven performance increases through pre and post-dyno testing of vehicles.; Our stainless steel products are made from only the finest materials, and are manufactured with exacting specifications by skilled American craftsmen.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eList Info\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePRODUCT NOTES:\u003c\/b\u003e\u003cbr\u003eAir Tubes Included - No\u003cbr\u003eBrand - Stainless Works\u003cbr\u003eCalifornia Legal - No\u003cbr\u003eCategory - Headers \u0026amp; Exhaust\u003cbr\u003eCollector Outlet Size - 2-1\/2\u003cbr\u003eConnection Point - Factory Connect\u003cbr\u003eCrossover Style - Y-Pipe\u003cbr\u003eEmissions - High-Flow Cats\u003cbr\u003eFinish - Mill\u003cbr\u003eHeader Type - Long Tube\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of Stainless Works products!\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853043319042,"sku":"SSWCA0102CAT","price":2275.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/ca0102cat-1-primary.jpg?v=1784961666"},{"product_id":"stainless-works-2010-15-camaro-6-2l-3in-exhaust-x-pipe-s-tube-turbo-mufflers-polished-tips","title":"Stainless Works CA10CB 2010-2015 Chevy Camaro 6.2L 3\" Dual S-Tube System (Factory Connect)","description":"\u003cp\u003e2010-15 Camaro 6.2L 304 SS CNC mandrel bent 3\" dual exhaust system with x-pipe, dual s-tube turbo mufflers, mirror polished stainless steel double-wall tips, and all hangers and clamps for easy installation. Fits factory connection point.\u003c\/p\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853043384578,"sku":"SSWCA10CB","price":1851.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/CA10CB_1.jpg?v=1784961664"},{"product_id":"stainless-works-2010-15-camaro-6-2l-3in-exhaust-x-pipe-chambered-turbo-mufflers-polished-tips","title":"Stainless Works CA10CBC 2010-2015 Chevy Camaro 6.2L 3\" Dual Turbo Chambered System (Factory Connect)","description":"\u003cp\u003e2010-15 Camaro 6.2L 304 SS CNC mandrel bent 3\" dual exhaust system with x-pipe, dual turbo chambered mufflers, mirror polished stainless steel tips, and all hangers and clamps for easy installation. Fits factory connection point.\u003c\/p\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853043450114,"sku":"SSWCA10CBC","price":1851.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/CA10CBC_1.jpg?v=1784961660"},{"product_id":"stainless-works-2010-15-camaro-6-2l-3in-exhaust-x-pipe-s-tube-turbo-mufflers-polished-tips-1","title":"Stainless Works CA10CBL-LMF 2010-2015 Chevy Camaro 6.2L 3\" Dual Exhaust Catback with S-Tube Mufflers","description":"2010-15 Camaro 6.2L 304 SS CNC mandrel bent 3\" dual exhaust system with x-pipe, dual 3\" core s-tube turbo mufflers, mirror polished stainless steel tips, and all hangers and clamps for easy installation. Very Aggressive Sound.\u003cbr\u003e\u003cbr\u003eUnlock the full potential of your new Camaro: Introducing Stainless Works' Stainless Steel dual-exhaust system for the 2010 Camaro. Whether you are fitting to a factory connection point, or to custom SW headers, you will gain performance and turn heads with this mean-sounding system. Constructed with high-quality 304L stainless steel, our durable Catback Systems are formed with CNC mandrel bends and backed by our lifetime guarantee.","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853043581186,"sku":"SSWCA10CBL-LMF","price":1851.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/CA10CBL-LMF_1.jpg?v=1784961662"},{"product_id":"stainless-works-2010-15-chevy-camaro-muffler-delete-exhaust-system","title":"Stainless Works CA10DEL 2010-2015 6.2L Camaro 3\" Muffler Delete System","description":"\u003cp\u003e2010-2015 Chevy Camaro muffler delete system, features 3\" muffler deletes and mirror-polished 4\" tips, with double-wall, conical construction. Comes complete with hangers, and requires minimal fabrication (a simple cut of factory exhaust tubing near factory mufflers).\u003c\/p\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853043646722,"sku":"SSWCA10DEL","price":593.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/CA10DEL_1.jpg?v=1784961666"},{"product_id":"stainless-works-2010-camaro-y-tips-for-factory-ground-effects","title":"Stainless Works 2010-15 Camaro Tips - CA10QUADTIPS","description":"Stainless Works Stainless Works 2010-15 Camaro Tips - CA10QUADTIPS\u003cbr\u003e\u003cbr\u003ePair of 2010-15 Camaro style tips with factory ground effects kit, Can be clamped or welded in place. Made from 304 stainless steel for maximum corrosion resistance. Hand mirror polished finish. The quality of our tips is far superior to the less expensive tips on the market. These are TIG welded for strength and durability. These kits come with a lifetime warranty and proudly made in the USA.\u003cbr\u003e\u003cbr\u003eStainless Works is an industry-leader in stainless steel performance headers and exhaust systems.\u003cbr\u003e\u003cbr\u003eIn addition to designing our wide range of after-market headers and exhausts, we manufacture them on-site, right here in the United States.; We are constantly adding new products for a variety of new car and truck models as well as the classics.; Our systems have proven performance increases through pre and post-dyno testing of vehicles.; Our stainless steel products are made from only the finest materials, and are manufactured with exacting specifications by skilled American craftsmen.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eList Info\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePRODUCT NOTES:\u003c\/b\u003e\u003cbr\u003eBrand - Stainless Works\u003cbr\u003eCalifornia Legal - Yes\u003cbr\u003eCategory - Tips\u003cbr\u003eFinish - Polished\u003cbr\u003eInlet Size - 3\u003cbr\u003eLength - 8-1\/4\u003cbr\u003eMaterial - 304 Stainless Steel\u003cbr\u003eTip Body Size - 5-5\/8 x 8-1\/4\u003cbr\u003eTip Style - Y-Tip\u003cbr\u003eTip Type - Single wall\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of Stainless Works products!\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853043712258,"sku":"SSWCA10QUADTIPS","price":284.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/ca10quadtips-1-primary.jpg?v=1784961662"},{"product_id":"stainless-works-10-15-camaro-6-2l-3in-dual-chambered-catback-system-x-pipe-factory-connect","title":"Stainless Works CA11CB 2010-2015 6.2L Camaro 3\" Dual Chambered Exhaust System (Factory Connect)","description":"\u003cp\u003e2010-15 Camaro 6.2L 304 SS CNC mandrel bent 3\" dual chambered catback exhaust system with x-pipe, dual chambered section mufflers, mirror polished stainless steel double-wall tips, and all hangers and clamps for easy installation. Deep musclecar sound! Retro style system to look like First Generation Camaro system. 2.5\" OD inlets neck down to connect to factory system headers.\u003c\/p\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853043777794,"sku":"SSWCA11CB","price":1994.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/CA11CB_1.jpg?v=1784961671"},{"product_id":"stainless-works-10-15-camaro-6-2l-3in-dual-chambered-catback-system-x-pipe-performance-connect","title":"Stainless Works CA11CB 2010-2015 6.2L Camaro 3\" Dual Chambered Exhaust System (Performance Connect)","description":"\u003cp\u003e2010-15 Camaro 6.2L 304 SS CNC mandrel bent 3\" dual chambered round exhaust system with x-pipe, chambered round mufflers, mirror polished double-wall stainless steel tips, and all hangers and clamps for easy installation. Full 3\" system designed to fit Stainless Works Performance Connect Headers.\u003c\/p\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853043843330,"sku":"SSWCA11CBL","price":1994.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/CA11CBL_1.jpg?v=1784961667"},{"product_id":"stainless-works-2011-15-camaro-v8-convertible-kit","title":"Stainless Works CA11CONVKIT Chevy Camaro 2011-15 Convertible Kit","description":"\u003cp\u003e2011-15 Camaro V8 Convertible Kit. This kit is available to adapt the clearance around the convertible frame bracing to allow for the use of the Stainless Works 3\" dual exhausts. Kit includes heavy duty 14 gage 304 SS front bracing to replace OEM brace, as well as spacers to provide extra clearance behind the differential at the rear bracing. All 304 SS construction with 304 SS hardware included.\u003c\/p\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853043908866,"sku":"SSWCA11CONVKIT","price":312.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/CA11CONVKIT_1.jpg?v=1784961661"},{"product_id":"stainless-works-2010-15-camaro-6-2l-headers-2in-primaries-3in-collectors-high-flow-cats","title":"Stainless Works CA11H3CAT 2010-2015 Chevy Camaro 6.2L Headers 2\" Catted (Performance Connect)","description":"2010-15 Camaro 6.2L 304 SS headers with CNC mandrel bent 2\" primaries and 3\" slip fit collectors with high flow metal matrix catalytic converters and 3\" lead pipes to fit Stainless Works Exhaust Systems. This full 3'' system and does not neck down, and fits only to SW Performance Connect exhaust.\u003cbr\u003e\u003cbr\u003eA must for the performance minded individual: Constructed with high quality 304L stainless steel, our durable headers are CNC mandrel bent with 3\/8'' thick flanges. With options to fit to the factory connection point, or to a custom Stainless Works catback, we have the system you're looking for. As with all of our systems, these headers are backed by our lifetime guarantee on material and workmanship.\u003cbr\u003e\u003cbr\u003eGain performance, sound and mileage with Stainless Works' 2010-15 Camaro Headers. Our Camaro headers are made from high-quality 304 stainless steel, and are CNC mandrel bent. Designed and made in our facility in the United States these headers are the top of the line in performance upgrades.\u003cbr\u003e\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853043974402,"sku":"SSWCA11H3CAT","price":2180.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/CA11H3CAT_1.jpg?v=1784961669"},{"product_id":"stainless-works-2010-15-camaro-6-2l-headers-1-7-8in-primaries-3in-collectors-high-flow-cats","title":"Stainless Works CA11H3CATST 2010-2015 Chevy Camaro 6.2L 1-7\/8\" Headers Catted (Performance Connect)","description":"2010-15 Camaro 6.2L 304 SS headers with CNC mandrel bent 1-7\/8\" primaries and 3\" slip fit collectors with high flow metal matrix catalytic converters and 3\" lead pipes to fit to Stainless Works Exhaust System. This full 3'' system and does not neck down, and fits only to SW Performance Connect exhaust.\u003cbr\u003e\u003cbr\u003eA must for the performance minded individual: Constructed with high quality 304L stainless steel, our durable headers are CNC mandrel bent with 3\/8'' thick flanges. With options to fit to the factory connection point, or to a custom Stainless Works catback, we have the system you're looking for. As with all of our systems, these headers are backed by our lifetime guarantee on material and workmanship.\u003cbr\u003e\u003cbr\u003eGain performance, sound and mileage with Stainless Works' 2010-15 Camaro Headers. Our Camaro headers are made from high-quality 304 stainless steel, and are CNC mandrel bent. Designed and made in our facility in the United States these headers are the top of the line in performance upgrades.\u003cbr\u003e\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853044039938,"sku":"SSWCA11H3CATST","price":2180.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/CA11H3CATST_1.jpg?v=1784961663"},{"product_id":"stainless-works-2010-15-camaro-6-2l-headers-2in-primaries-3in-collectors-high-flow-cats-1","title":"Stainless Works CA11HCAT 2010-2015 Chevy Camaro 6.2L Headers 2\" Catted (Factory Connect)","description":"2010-15 Camaro 6.2L 304 SS headers with CNC mandrel bent 2\" primaries and 3\" slip fit collectors with high flow metal matrix catalytic converters and 3\" lead pipes to fit factory connection point\u003cbr\u003e\u003cbr\u003eA must for the performance minded individual: Constructed with high quality 304L stainless steel, our durable headers are CNC mandrel bent with 3\/8'' thick flanges. With options to fit to the factory connection point, or to a custom Stainless Works catback, we have the system you're looking for. As with all of our systems, these headers are backed by our lifetime guarantee on material and workmanship.\u003cbr\u003e\u003cbr\u003eGain performance, sound and mileage with Stainless Works' 2010-15 Camaro Headers. Our Camaro headers are made from high-quality 304 stainless steel, and are CNC mandrel bent. Designed and made in our facility in the United States these headers are the top of the line in performance upgrades.\u003cbr\u003e\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853044105474,"sku":"SSWCA11HCAT","price":2180.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/CA11HCAT_1.jpg?v=1784961666"},{"product_id":"stainless-works-2010-15-camaro-6-2l-headers-1-7-8in-primaries-3in-collectors-high-flow-cats-1","title":"Stainless Works CA11HCATST 2010-2015 Chevy Camaro 6.2L 1-7\/8\" Headers Catted (Factory Connect)","description":"2010-15 Camaro 6.2L 304 SS headers with CNC mandrel bent 1-7\/8\" primaries and 3\" slip fit collectors with high flow metal matrix catalytic converters and 3\" lead pipes to fit factory connection point\u003cbr\u003e\u003cbr\u003eA must for the performance minded individual: Constructed with high quality 304L stainless steel, our durable headers are CNC mandrel bent with 3\/8'' thick flanges. With options to fit to the factory connection point, or to a custom Stainless Works catback, we have the system you're looking for. As with all of our systems, these headers are backed by our lifetime guarantee on material and workmanship.\u003cbr\u003e\u003cbr\u003eGain performance, sound and mileage with Stainless Works' 2010-15 Camaro Headers. Our Camaro headers are made from high-quality 304 stainless steel, and are CNC mandrel bent. Designed and made in our facility in the United States these headers are the top of the line in performance upgrades.\u003cbr\u003e\u003cbr\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853044171010,"sku":"SSWCA11HCATST","price":2180.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/CA11HCATST_1.jpg?v=1784961670"},{"product_id":"stainless-works-2012-15-camaro-zl1-6-2l-3in-catback-dual-chambered-exhaust-x-pipe-resonator-deletes-1","title":"Stainless Works CA12CBL 2012-2015 Chevy Camaro ZL1 6.2L 3\" Dual Chambered Catback Exhaust System (Performance Connect)","description":"\u003cp\u003e2012-15 Chevy Camaro ZL1 6.2L 2012-13 3\" Catback Dual Chambered Exhaust System with X-Pipe, resonators and Polished Quad Slash-Cut Tips. Includes all hangers and clamps for easy installation. Fits Stainless Works Headers part #CA11HDR3. Give your new ZL1 the deep muscle car growl it deserves!\u003c\/p\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":47853044367618,"sku":"SSWCA12CBL","price":2136.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/CA12CBL_1.jpg?v=1784961668"}],"url":"https:\/\/www.lethalperformance.com\/collections\/stainless-works-gm-car.oembed","provider":"Lethal Performance","version":"1.0","type":"link"}