{"title":"Sensors","description":"\u003ch1\u003eSensors\u003c\/h1\u003e","products":[{"product_id":"apr-boost-tap-ea113-ea888-gen-1-2-partial-kit","title":"APR Boost Tap - EA113\/EA888 Gen 1\/2 (Partial Kit)","description":"Fits Audi A3 06-13, A4 05-08, A5 10-17,  A6 12-18, Q3 15-18, Q5 11-17, TT 08-15, TTS 09-19; VW Beetle 12-19, CC 09-17, Eos 07-16, Golf R 12-13, GTI 06-14, Jetta 05-10, Passat 06-22, Tiguan 09-18, Tiguan Limited 17-18","brand":"APR","offers":[{"title":"Default Title","offer_id":47298737012994,"sku":"HJQF_MS100031","price":71.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/ms100031_001.jpg?v=1769621345"},{"product_id":"apr-boost-tap-ea113-ea888-gen-1-2","title":"APR Boost Tap - EA113\/EA888 Gen 1\/2","description":"The APR Modular Boost Tap and PCV Bypass System plugs directly into the intake manifold and makes several configuration options available. The APR Modular Boost Tap features a tap used for referencing boost or vacuum from the manifold and a cap if this feature is unneeded. A T-junction allows for multiple boost and vacuum references and a 'no buzz' restrictor pill allows for proper manual boost gauge operation. The system also includes a threaded PCV plug, allowing the PCV system to operate as intended by the OEM, as well as blocked off if needed for a specific PCV or catch-can setup. Furthermore, temporarily installing the threaded plug allows for quick diagnosis of the PCV valve for boost leaks. This innovative and modular design ensures operation with all boost, vacuum and PCV system combinations, leaving no compatibility worries for future configurations.","brand":"APR","offers":[{"title":"Default Title","offer_id":47298737111298,"sku":"HJQF_MS100030","price":81.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/ms100030_001.jpg?v=1769621352"},{"product_id":"oem-map-sensor-bosch-oem-3-bar","title":"OEM Map Sensor - Bosch OEM, 3 Bar","description":"Fits Audi A3 06-13, A3 Quattro 09-13, A4 05-08, A4 Quattro 05-08, TT 08-09, TT Quattro 09-15, TTS Quattro 09-15; Volkswagen Beetle 12-19, Eos 07-16, Golf R 12-13, GTI 06-09, Jetta 05-10, Passat 06-10","brand":"APR","offers":[{"title":"Default Title","offer_id":47298748612866,"sku":"HJQF_Z1002470","price":134.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/z1002470_001_rev2.jpg?v=1769621819"},{"product_id":"flowtech-oxygen-sensor-o2-bung-weld-in-style","title":"Flowtech Oxygen Sensor O2 Bung Weld-In Style","description":"Flowtech Oxygen Sensor O2 bung weld-in Style for use on all vehicles that utilize an Oxygen sensor","brand":"FlowTech","offers":[{"title":"Default Title","offer_id":47298910486786,"sku":"CJWH_10120FLT","price":23.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/10120flt_01.jpg?v=1769627872"},{"product_id":"accel-map-sensor-3-bar-vacuum-to-30psi","title":"ACCEL MAP Sensor - 3 Bar Vacuum to 30PSI","description":"This sensor monitors manifold vacuum, varying output voltage to the ECU as a function of load placed on the engine, providing necessary data to control fuel enrichment","brand":"ACCEL","offers":[{"title":"Default Title","offer_id":47299055616258,"sku":"BDDP_74777","price":155.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/11e6e1ba5a167905e1782dadc6ed89bc.jpg?v=1769631339"},{"product_id":"earls-oxygen-sensor-weld-fitting-weld-bung-stainless-steel","title":"Earl's Oxygen Sensor Weld Fitting (Weld Bung) - Stainless Steel","description":"Earl's O2 Sensor Weld Fittings are the ideal way to add a sensor when converting to EFI or adding a wideband Air\/Fuel gauge for tuning carbureted engines.  The weld fittings are available in steel or stainless steel to match your exhaust system.  The thread size is 18mm x 1.5 and fit most Factory and aftermarket O2 sensors (GM, Ford, Chrysler \u0026amp; most import vehicles).  Features are recessed step for easy installation by drilling a hole in the exhaust system and welding the fitting in place.  Sold individually","brand":"Earl's Performance","offers":[{"title":"Default Title","offer_id":47299058729218,"sku":"CFRL_SSOXY018ERL","price":16.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/ssoxy018erl_01.jpg?v=1769631455"},{"product_id":"hooker-blackheart-oxygen-sensor-o2-bung-3-0-clamp-on-style","title":"Hooker BlackHeart Oxygen Sensor O2 Bung 3.0\" Clamp-On Style","description":"Oxygen Sensor O2 Bung 3\" Clamp-On Style for all vehicles that utilize an Oxygen sensor","brand":"Hooker BlackHeart","offers":[{"title":"Default Title","offer_id":47299068494082,"sku":"JVRB_71014301-RHKR","price":53.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/clamp-on_o2_bung_01.jpg?v=1769631662"},{"product_id":"includes-tps-switch-billet-bracket-connector-rod-and-adapter-lever","title":"Includes TPS switch, billet bracket, connector rod and adapter lever","description":"Includes TPS switch, billet bracket, connector rod and adapter lever","brand":"Demon Fuel Systems","offers":[{"title":"Default Title","offer_id":47299424518402,"sku":"BGWW_1951","price":318.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/1951.jpg?v=1769636989"},{"product_id":"earls-oxygen-sensor-weld-fitting-weld-bung-steel","title":"Earl's Oxygen Sensor Weld Fitting (Weld Bung) - Steel","description":"Earl's O2 Sensor Weld Fittings are the ideal way to add a sensor when converting to EFI or adding a wideband Air\/Fuel gauge for tuning carbureted engines.  The weld fittings are available in steel or stainless steel to match your exhaust system.  The thread size is 18mm x 1.5 and fit most Factory and aftermarket O2 sensors (GM, Ford, Chrysler \u0026amp; most import vehicles).  Features are recessed step for easy installation by drilling a hole in the exhaust system and welding the fitting in place.  Sold individually","brand":"Earl's Performance","offers":[{"title":"Default Title","offer_id":47299612967170,"sku":"CFRL_OXY018ERL","price":11.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/oxy018erl_01.jpg?v=1769638204"},{"product_id":"earls-exhaust-back-pressure-plumbing-kit","title":"Earl's Exhaust Back Pressure Plumbing Kit","description":"This plumbing kit includes the components needed to install an exhaust back pressure sensor (the sensor is available separately - part number 554-102).  This type of sensor is often used with data acquisition, or EFI systems to monitor the exhaust back pressure just prior to the turbo.  The exhaust heat and engine vibration are tough on the sensor, so it is mounted remotely and isolated by the stainless hardline \u0026amp; flexible Speed-Flex hose assembly.  This kit includes: weld bung, pre-made stainless hardline, Speed-Flex hose assembly, sensor mounting clamp, adapters \u0026amp; hardware.","brand":"Earl's Performance","offers":[{"title":"Default Title","offer_id":47299695739138,"sku":"CFRL_PK0001ERL","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/pk0001erl_011931.jpg?v=1769641246"},{"product_id":"earls-3-8-npt-female-weld-boss","title":"Earl's 3\/8\" NPT Female Weld Boss","description":"6061 Lightweight Bare Aluminum Construction.  Ideal for Modifying or Making Custom Tanks and Other Components.","brand":"Earl's Performance","offers":[{"title":"Default Title","offer_id":47299870949634,"sku":"CFRL_986703ERL","price":29.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/986703erl.jpg?v=1769645038"},{"product_id":"clearance-item-all-sales-final-female-npt-weld-bung-3-4-npt","title":"CLEARANCE ITEM \/ ALL SALES FINAL - Female NPT Weld Bung 3\/4\" NPT","description":"6061 Lightweight Bare Aluminum Construction.  Ideal for Modifying or Making Custom Tanks and Other Components.","brand":"Earl's Performance","offers":[{"title":"Default Title","offer_id":47299871211778,"sku":"CFRL_986706ERL","price":2.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/986703erl_7378534b-e780-4ecd-a48c-8672efb54b56.jpg?v=1769645044"},{"product_id":"compatible-w-edge-cs2-cts2-cts3-1-8-in-npt","title":"Compatible w\/ Edge CS2\/CTS2\/CTS3 - 1\/8 in. NPT","description":"The EAS Pressure Sensor is a 0 - 100 PSIg 1\/8 NPT sensor that plugs directly into the Universal Sensor Input system (p\/n 98605). The Pressure Sensor comes equipped with the proper wires and connectors to plug right into the Universal Sensor Input system saving time and money on cutting, splicing, and crimping wire terminals to connect the sensor. Use the Pressure Sensor to monitor data such as Boost PSI, Fuel Rail Pressure, Air Bag Pressure, Lift Pump Pressure, Pre and Post Intercooler Pressure and many more.","brand":"Edge Products","offers":[{"title":"Default Title","offer_id":47300034887938,"sku":"BKDQ_98607","price":220.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/98607_01.jpg?v=1769648400"},{"product_id":"compatible-w-edge-juice-attitude-products","title":"Compatible w\/ Edge Juice Attitude Products","description":"JUICE WITH ATTITUDE REPLACEMENT EGT PROBE (only for Juice w\/ Attitude products)","brand":"Edge Products","offers":[{"title":"Default Title","offer_id":47300035084546,"sku":"BKDQ_98900","price":61.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/98900_01.jpg?v=1769648407"},{"product_id":"compatible-w-edge-cts3-and-cs2-cts2","title":"Compatible w\/ Edge CTS3 and CS2\/CTS2","description":"Backed by Edge Products’ 20+ years of diesel performance innovation, the EAS Street Diesel Kit is the perfect solution for drivers who demand reliability, convenience, and precision monitoring. Pair it with your CTS3 tuner or monitor to create the ultimate all-in-one performance and safety system for your diesel truck.","brand":"Edge Products","offers":[{"title":"Default Title","offer_id":47300050845954,"sku":"BKDQ_98623","price":425.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/2ab688b3c897ca7b6c4cba3801b4764d39315d6a.jpg?v=1769648839"},{"product_id":"fuel-pressure-sensor-msd-atomic-tbi-6-o-ring-boss","title":"Fuel Pressure Sensor, MSD Atomic TBI, -6 O-Ring Boss","description":"Replacement fuel pressure sensor for the Atomic EFI fuel injection system. This sensor fits in to a 6AN O-ring boss port.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47300711416066,"sku":"BCCX_29291","price":92.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/msd-29291_xh_xl.jpg?v=1769662146"},{"product_id":"atomic-tbi-fuel-pressure-sensor","title":"Atomic TBI, Fuel Pressure Sensor","description":"Atomic TBI, Fuel Pressure Sensor","brand":"MSD","offers":[{"title":"Default Title","offer_id":47300711710978,"sku":"BCCX_2929","price":71.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/2929_v1.jpg?v=1769662153"},{"product_id":"plug-in-2psia-44psia-map-sensor-for-the-programmable-digital-7","title":"Plug-in 2psia - 44psia MAP sensor for the Programmable Digital-7.","description":"The pressure inside the intake manifold is an extremely important input to the ECU. This sensor will respond to changes in manifold pressures and relay the information to the ECU in the form of a voltage signal ranging from about 1 volt to 5 volts. Several different versions are available for normally-aspirated and engines with blowers. Applications up to 30 lbs. of boost.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303100629250,"sku":"BCCX_23131","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/23131_v1.jpg?v=1769663181"},{"product_id":"map-sensor-3-bar-for-blown-turbo","title":"MAP Sensor 3-bar for blown\/turbo","description":"The pressure inside the intake manifold is an extremely important input to the ECU. This sensor will respond to changes in manifold pressures and relay the information to the ECU in the form of a voltage signal ranging from about 1 volt to 5 volts. Several different versions are available for normally-aspirated and engines with blowers. Applications up to 30 lbs. of boost.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303117799682,"sku":"BCCX_2313","price":190.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/2313_v2.jpg?v=1769663187"},{"product_id":"plug-in-2psia-29psia-map-sensor-for-the-programmable-digital-7","title":"Plug-in 2psia - 29psia MAP sensor for the Programmable Digital-7.","description":"The pressure inside the intake manifold is an extremely important input to the ECU. This sensor will respond to changes in manifold pressures and relay the information to the ECU in the form of a voltage signal ranging from about 1 volt to 5 volts. Several different versions are available for normally-aspirated and engines with blowers. Applications up to 15 lbs. of boost.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303144210690,"sku":"BCCX_23121","price":167.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/23121_v1.jpg?v=1769663194"},{"product_id":"map-sensor-2-bar-for-blown-turbo","title":"MAP Sensor 2-bar for blown\/turbo","description":"The pressure inside the intake manifold is an extremely important input to the ECU. This sensor will respond to changes in manifold pressures and relay the information to the ECU in the form of a voltage signal ranging from about 1 volt to 5 volts. Several different versions are available for normally-aspirated and engines with blowers. Applications up to 15 lbs. of boost.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303166755074,"sku":"BCCX_2312","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/2312_v1.jpg?v=1769663201"},{"product_id":"small-block-chevy-use-with-msd-6-7-8-series-ignition-black","title":"Small Block Chevy - Use with MSD 6\/7\/8 Series Ignition - Black","description":"The MSD Flying Magnet Crank Trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This \"flying magnet\" design produces accurate trigger signals and the non-magnetic pick-up cannot be falsely triggered. Each Flying Magnet Crank Trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver's side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The CNC-machined aluminum bracket securely holds the pick-up in place and is slotted to provide a wide range of timing adjustments. Spacers are included so you can mount the bracket on engines with standard motor mounts or engines with a .25\" motor plate. These systems will trigger MSD 6, 7, and 8 Series Ignitions and all MSD Timing Accessories.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303206076674,"sku":"BCCX_86103","price":519.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/86103_01.jpg?v=1769663225"},{"product_id":"msd-crank-trigger-wheel-kit-universal-7-in-diameter-balancers","title":"MSD Crank Trigger Wheel Kit - Universal - 7 in. Diameter Balancers","description":"This kit is supplied with everything you'll need to get you going in the right direction. A 7\" billet aluminum wheel is supplied that has magnet positions for 4, 6, 8, 10 or even 12-cylinder engines. An oversized bracket arm is supplied that can be cut down to your specs and an \"L\" shaped holder is also supplied that can be machined for the 3\/4\" or 3\/8\" pick-up.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303489356034,"sku":"BCCX_8655","price":675.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/8655.jpg?v=1769663430"},{"product_id":"trigger-pickup-total-loss","title":"Trigger Pickup, Total Loss","description":"This Wand Trigger Pickup can be used for Kawasaki®, SEA-DOO® and Yamaha® 650\/701\/760.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303497449730,"sku":"BCCX_4316","price":110.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/4316.jpg?v=1769663877"},{"product_id":"small-block-chevy-use-with-msd-6-7-8-series-ignition-black-1","title":"Small Block Chevy - Use with MSD 6\/7\/8 Series Ignition - Black","description":"For a long time, racers have known that one of the best things to do to an engine to improve performance is to stabilize the ignition timing. The MSD Flying Magnet Crank Trigger system does exactly that by using four magnets embedded in an aluminum wheel. Although similar in appearance to other crank triggers, the MSD Flying Magnet design works on a different principle. Most crank triggers have a wheel, with steel studs sticking out, bolted to the harmonic balancer. As the crankshaft turns, the studs pass by a stationary magnetic pick-up, triggering the ignition. This pick-up can be triggered by other bolts, debris, or even vibrations which will cause a loss of power or engine damage.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303503216898,"sku":"BCCX_86003","price":519.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/86003_v1.jpg?v=1769663998"},{"product_id":"msd-crank-trigger-wheel-kit-flying-magnet-chrysler-small-block-7-25-in","title":"MSD Crank Trigger Wheel Kit - Flying Magnet - Chrysler Small Block - 7.25 in.","description":"For a long time, racers have known that one of the best things to do to an engine to improve performance is to stabilize the ignition timing. The MSD Flying Magnet Crank Trigger system does exactly that by using four magnets embedded in an aluminum wheel. Although similar in appearance to other crank triggers, the MSD Flying Magnet design works on a different principle. Most crank triggers have a wheel, with steel studs sticking out, bolted to the harmonic balancer. As the crankshaft turns, the studs pass by a stationary magnetic pick-up, triggering the ignition. This pick-up can be triggered by other bolts, debris, or even vibrations which will cause a loss of power or engine damage.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303503315202,"sku":"BCCX_8633","price":699.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/8633.jpg?v=1769664005"},{"product_id":"msd-crank-trigger-wheel-kit-flying-magnet-sbf-windsor","title":"MSD Crank Trigger Wheel Kit - Flying Magnet - SBF - Windsor","description":"The MSD Flying Magnet Crank Trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This \"flying magnet\" design produces accurate trigger signals and the non-magnetic pick-up cannot be falsely triggered. Each Flying Magnet Crank Trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver's side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The CNC-machined aluminum bracket securely holds the pick-up in place and is slotted to provide a wide range of timing adjustments. Spacers are included so you can mount the bracket on engines with standard motor mounts or engines with a .25\" motor plate. These systems will trigger MSD 6, 7, and 8 Series Ignitions and all MSD Timing Accessories.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303503413506,"sku":"BCCX_8640","price":675.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/8640_01.jpg?v=1769664013"},{"product_id":"msd-crank-trigger-wheel-kit-flying-magnet-chrysler-b-rb-7-25-in","title":"MSD Crank Trigger Wheel Kit - Flying Magnet - Chrysler B\/RB - 7.25 in.","description":"For a long time, racers have known that one of the best things to do to an engine to improve performance is to stabilize the ignition timing. The MSD Flying Magnet Crank Trigger system does exactly that by using four magnets embedded in an aluminum wheel. Although similar in appearance to other crank triggers, the MSD Flying Magnet design works on a different principle. Most crank triggers have a wheel, with steel studs sticking out, bolted to the harmonic balancer. As the crankshaft turns, the studs pass by a stationary magnetic pick-up, triggering the ignition. This pick-up can be triggered by other bolts, debris, or even vibrations which will cause a loss of power or engine damage.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303503511810,"sku":"BCCX_8636","price":649.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/8636_01.jpg?v=1769664021"},{"product_id":"msd-crank-trigger-kit-flying-magnet-hall-effect-ls-gen-iii-iv-7-25-in","title":"MSD Crank Trigger Kit - Flying Magnet - Hall-Effect - LS Gen III\/IV - 7.25 In.","description":"Upgrading to an MSD Flying Magnet Crank Trigger Kit will deliver the precise and reliable signal that a high performance engine requires. This kit gives you the ability to control timing electronically through a Holley EFI ECU (or other standalone engine management system \/ ignition controller).  At the heart of the kit is the 3-wire Hall-Effect Sensor that is easier to set up, less susceptible to EMI\/RFI interference\/noise, and less likely to have false signals than other methods (Distributors and VR Magnetic Sensors). In addition, they are less prone to mechanical failure since there are no wear parts. With the included high quality timing pointer and the use of a direct bolt-on, degreed balancer (ATI 917777 or 917211), you'll be able to adjust timing in the precise increments required for your LS Engine.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303503610114,"sku":"BCCX_8619","price":727.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/8619_01.jpg?v=1769664028"},{"product_id":"msd-crank-trigger-kit-flying-magnet-hall-effect-ls-gen-iii-iv-6-56-in","title":"MSD Crank Trigger Kit - Flying Magnet - Hall-Effect - LS Gen III\/IV - 6.56 in.","description":"Upgrading to an MSD Flying Magnet Crank Trigger Kit will deliver the precise and reliable signal that a high-performance engine requires. This kit gives you the ability to control timing electronically through a Holley EFI ECU (or other standalone engine management system\/ignition controller).  At the heart of the kit is the 3-wire Hall-Effect Sensor that is easier to set up, less susceptible to EMI\/RFI interference\/noise, and less likely to have false signals than other methods (Distributors and VR Magnetic Sensors). In addition, they are less prone to mechanical failure since there are no wear parts. With the included high-quality timing pointer and the use of a direct bolt-on, degreed balancer (ATI 917776 or 917215), you'll be able to adjust timing in the precise increments required for your LS Engine.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303503741186,"sku":"BCCX_8618","price":749.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/8618_03.jpg?v=1769664035"},{"product_id":"start-retard-to-make-for-easier-starts-on-crank-triggered-engines","title":"Start Retard to make for Easier Starts on Crank Triggered Engines","description":"Note: The Starter Saver can only be used on V8 applications using an MSD magnetic pickup distributor or crank trigger.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303503806722,"sku":"BCCX_8984","price":220.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/msdweb_8984.jpg?v=1769664041"},{"product_id":"msd-crank-trigger-wheel-kit-flying-magnet-hall-effect-bbc-8-in","title":"MSD Crank Trigger Wheel Kit - Flying Magnet - Hall-Effect  - BBC - 8 in.","description":"The MSD Flying Magnet Crank trigger is now available with a Hall-Effect sensor making it the most accurate way to trigger your EFI.  The kit installs easily and uses rigid aluminum mounting bracketry and hardware that will not flex and cause timing fluctuations.  Powerful magnets are embedded in a 3\/8\" thick aluminum trigger wheel that will send your EFI a clean signal for every firing.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303503872258,"sku":"BCCX_86201","price":623.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/86201_01.jpg?v=1769664049"},{"product_id":"msd-crank-trigger-wheel-kit-flying-magnet-hall-effect-sbc-7-in","title":"MSD Crank Trigger Wheel Kit - Flying Magnet - Hall-Effect  - SBC - 7 in.","description":"The MSD Flying Magnet Crank trigger is now available with a Hall-Effect sensor making it the most accurate way to trigger your EFI.  The kit installs easily and uses rigid aluminum mounting bracketry and hardware that will not flex and cause timing fluctuations.  Powerful magnets are embedded in a 3\/8\" thick aluminum trigger wheel that will send your EFI a clean signal for every firing.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303504036098,"sku":"BCCX_86101","price":623.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/86101_01.jpg?v=1769664055"},{"product_id":"small-block-chevy-use-with-msd-6-7-8-series-ignition-black-2","title":"Small Block Chevy - Use with MSD 6\/7\/8 Series Ignition - Black","description":"For a long time, racers have known that one of the best things to do to an engine to improve performance is to stabilize the ignition timing. The MSD Flying Magnet Crank Trigger system does exactly that by using four magnets embedded in an aluminum wheel. Although similar in appearance to other crank triggers, the MSD Flying Magnet design works on a different principle. Most crank triggers have a wheel, with steel studs sticking out, bolted to the harmonic balancer. As the crankshaft turns, the studs pass by a stationary magnetic pick-up, triggering the ignition. This pick-up can be triggered by other bolts, debris, or even vibrations which will cause a loss of power or engine damage.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303504101634,"sku":"BCCX_86153","price":584.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/86153_v1.jpg?v=1769664062"},{"product_id":"small-block-chevy-use-with-msd-6-7-8-series-ignition-red","title":"Small Block Chevy - Use with MSD 6\/7\/8 Series Ignition - Red","description":"For a long time, racers have known that one of the best things to do to an engine to improve performance is to stabilize the ignition timing. The MSD Flying Magnet Crank Trigger system does exactly that by using four magnets embedded in an aluminum wheel. Although similar in appearance to other crank triggers, the MSD Flying Magnet design works on a different principle. Most crank triggers have a wheel, with steel studs sticking out, bolted to the harmonic balancer. As the crankshaft turns, the studs pass by a stationary magnetic pick-up, triggering the ignition. This pick-up can be triggered by other bolts, debris, or even vibrations which will cause a loss of power or engine damage.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303504199938,"sku":"BCCX_8615","price":584.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/8615.jpg?v=1769664069"},{"product_id":"small-block-chevy-use-with-msd-6-7-8-series-ignition-red-1","title":"Small Block Chevy - Use with MSD 6\/7\/8 Series Ignition - Red","description":"The MSD Flying Magnet Crank Trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This \"flying magnet\" design produces accurate trigger signals and the non-magnetic pick-up cannot be falsely triggered. Each Flying Magnet Crank Trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver's side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The CNC-machined aluminum bracket securely holds the pick-up in place and is slotted to provide a wide range of timing adjustments. Spacers are included so you can mount the bracket on engines with standard motor mounts or engines with a .25\" motor plate. These systems will trigger MSD 6, 7, and 8 Series Ignitions and all MSD Timing Accessories.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303504396546,"sku":"BCCX_8600","price":519.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/8600_01.jpg?v=1769664083"},{"product_id":"289-302-351w-6-562-in-crank-trigger-wheel-and-hall-effect-crank-sensor","title":"289\/302\/351W - 6.562 in. - Crank Trigger Wheel and Hall-Effect Crank Sensor","description":"The MSD Flying Magnet Crank trigger is now available with a Hall-Effect sensor making it the most accurate way to trigger your EFI.  The kit installs easily and uses rigid aluminum mounting bracketry and hardware that will not flex and cause timing fluctuations.  Powerful magnets are embedded in a 3\/8\" thick aluminum trigger wheel that will send your EFI a clean signal for every firing.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303504494850,"sku":"BCCX_86401","price":623.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/86401_01.jpg?v=1769664090"},{"product_id":"msd-pressure-sensor-0-75-psi-with-harness","title":"MSD Pressure Sensor - 0-75 PSI  - With Harness","description":"If you are looking for accurate AFR readings Pre-turbo or just want to know what your back pressure is then the 7767 is for you.  When combined with the 7766 NTK wideband module you can read AFR accurately with up to 75psi of back pressure.  With other widebands this is not possible due to their lack of back pressure compensation.  You can use a single 7766 and 7767 module to get per bank information on your engine, or use 4 7766 modules with a single 7767 to get per cylinder AFR readings on your 8 cylinder turbo charged engine.  You can easily pair the 7766 and 7767 with a Power Grid for plug and play operation or use the supplied analog outputs on each module to read AFR and back pressure data on your data logger or EFI system of choice.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303505477890,"sku":"BCCX_22691","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/22691_0119241.jpg?v=1769664147"},{"product_id":"msd-crank-trigger-pickup-shielded-non-magnetic-3-8-24-x-1-5","title":"MSD Crank Trigger Pickup - Shielded - Non-Magnetic - 3\/8\"-24 x 1.5\"","description":"The 3\/8\" diameter Pick-Ups are used with MSD's Sprint Car Crank Trigger systems as well as the professional racing kits from RCD and PSI.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303507575042,"sku":"BCCX_8154","price":349.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/8154_01.jpg?v=1769664268"},{"product_id":"harness-ls-58x-4x-front-cam-sensor","title":"Harness, LS, 58x\/4x, Front Cam Sensor","description":"Adapter harness for LS engines with various crank \/ cam sensor combinations when running an MSD 6LS Ignition Control.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303511113986,"sku":"BCCX_2278","price":56.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/2278_v11815.png?v=1769664465"},{"product_id":"harness-ls-24x-1x-rear-cam-sensor","title":"Harness, LS, 24x\/1x, Rear Cam Sensor","description":"Adapter harness for LS engines with various crank \/ cam sensor combinations when running an MSD 6LS Ignition Control.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303511965954,"sku":"BCCX_22791","price":51.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/2279_011815.jpg?v=1769664521"},{"product_id":"msd-crank-trigger-wheel-kit-flying-magnet-sbf-windsor-1","title":"MSD Crank Trigger Wheel Kit - Flying Magnet - SBF - Windsor","description":"For a long time, racers have known that one of the best things to do to an engine to improve performance is to stabilize the ignition timing. The MSD Flying Magnet Crank Trigger system does exactly that by using four magnets embedded in an aluminum wheel. Although similar in appearance to other crank triggers, the MSD Flying Magnet design works on a different principle. Most crank triggers have a wheel, with steel studs sticking out, bolted to the harmonic balancer. As the crankshaft turns, the studs pass by a stationary magnetic pick-up, triggering the ignition. This pick-up can be triggered by other bolts, debris, or even vibrations which will cause a loss of power or engine damage.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303528448258,"sku":"BCCX_86403","price":623.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/86403_0119298.jpg?v=1769665137"},{"product_id":"big-block-chevy-use-with-msd-6-7-8-series-ignition-black","title":"Big Block Chevy - Use with MSD 6\/7\/8 Series Ignition - Black","description":"The MSD Flying Magnet Crank Trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This \"flying magnet\" design produces accurate trigger signals and the non-magnetic pick-up cannot be falsely triggered. Each Flying Magnet Crank Trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver's side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The CNC-machined aluminum bracket securely holds the pick-up in place and is slotted to provide a wide range of timing adjustments. Spacers are included so you can mount the bracket on engines with standard motor mounts or engines with a .25\" motor plate. These systems will trigger MSD 6, 7, and 8 Series Ignitions and all MSD Timing Accessories.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303528612098,"sku":"BCCX_86203","price":558.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/86203_01.jpg?v=1769665144"},{"product_id":"msd-crank-trigger-kit-flying-magnet-hall-effect-ls-gen-iii-iv-8-00-in","title":"MSD Crank Trigger Kit - Flying Magnet - Hall-Effect - LS Gen III\/IV - 8.00 in.","description":"On some vehicles, the MSD Crank Trigger Kit may require slight modifications to accommodate special engine plates, pulley systems, etc.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303528677634,"sku":"BCCX_8623-MSD","price":779.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/8623-msdfrontclean.jpg?v=1769665151"},{"product_id":"black-replacement-wheel-for-crank-trigger-kit-p-n-86203","title":"Black - Replacement Wheel for Crank Trigger Kit (p\/n: 86203)","description":"Most crank triggers have a wheel, with steel studs sticking out, bolted to the harmonic balancer. As the crankshaft turns, the studs pass by a stationary magnetic pick-up, triggering the ignition. This pick-up can be triggered by other bolts, debris or even vibrations which will cause a loss of power or engine damage. The MSD Flying Magnet Crank Trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This \"flying magnet\" design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered, making this one of the best on the market!!","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303528775938,"sku":"BCCX_86213","price":399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/86213_v1.jpg?v=1769665158"},{"product_id":"black-replacement-wheel-for-small-block-chevy-crank-trigger-kit-p-n-86103","title":"Black - Replacement Wheel for Small Block Chevy Crank Trigger Kit (p\/n 86103)","description":"For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD Flying Magnet Crank Trigger systems do exactly that by using four magnets embedded in an aluminum wheel. Although similar in appearance to other crank triggers, the MSD Flying Magnet design works on a different principle.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303528874242,"sku":"BCCX_86113","price":335.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/86113_v1.jpg?v=1769665165"},{"product_id":"big-block-ford-429-460ci-use-with-msd-6-7-8-series-ignition-red","title":"Big Block Ford - 429-460ci - Use with MSD 6\/7\/8 Series Ignition - Red","description":"Most crank triggers have a wheel, with steel studs sticking out, bolted to the harmonic balancer. As the crankshaft turns, the studs pass by a stationary magnetic pick-up, triggering the ignition. This pick-up can be triggered by other bolts, debris, or even vibrations which will cause a loss of power or engine damage. The MSD Flying Magnet Crank Trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This \"flying magnet\" design produces accurate trigger signals and the non-magnetic pick-up cannot be falsely triggered.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303529005314,"sku":"BCCX_8644","price":649.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/8644_01.jpg?v=1769665172"},{"product_id":"crank-trigger-kit-for-use-with-msd-6-7-8-series-ignition-red","title":"Crank trigger kit for use with MSD 6\/7\/8-Series Ignition - Red","description":"The MSD Flying Magnet Crank Trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This \"flying magnet\" design produces accurate trigger signals and the non-magnetic pick-up cannot be falsely triggered. Each Flying Magnet Crank Trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver's side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The CNC-machined aluminum bracket securely holds the pick-up in place and is slotted to provide a wide range of timing adjustments. Spacers are included so you can mount the bracket on engines with standard motor mounts or engines with a .25\" motor plate. These systems will trigger MSD 6, 7, and 8 Series Ignitions and all MSD Timing Accessories.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303529103618,"sku":"BCCX_8650","price":675.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/8650.jpg?v=1769665179"},{"product_id":"big-block-chevy-use-with-msd-6-7-8-series-ignition-red","title":"Big Block Chevy - Use with MSD 6\/7\/8 Series Ignition - Red","description":"For a long time, racers have known that one of the best things to do to an engine to improve performance is to stabilize the ignition timing. The MSD Flying Magnet Crank Trigger system does exactly that by using four magnets embedded in an aluminum wheel. Although similar in appearance to other crank triggers, the MSD Flying Magnet design works on a different principle. Most crank triggers have a wheel, with steel studs sticking out, bolted to the harmonic balancer. As the crankshaft turns, the studs pass by a stationary magnetic pick-up, triggering the ignition. This pick-up can be triggered by other bolts, debris, or even vibrations which will cause a loss of power or engine damage.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303529595138,"sku":"BCCX_8620","price":558.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/8620_01.jpg?v=1769665187"},{"product_id":"small-block-chevy-use-with-msd-6-7-8-series-ignition-red-2","title":"Small Block Chevy - Use with MSD 6\/7\/8 Series Ignition - Red","description":"The MSD Flying Magnet Crank Trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This \"flying magnet\" design produces accurate trigger signals and the non-magnetic pick-up cannot be falsely triggered. Each Flying Magnet Crank Trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver's side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The CNC-machined aluminum bracket securely holds the pick-up in place and is slotted to provide a wide range of timing adjustments. Spacers are included so you can mount the bracket on engines with standard motor mounts or engines with a .25\" motor plate. These systems will trigger MSD 6, 7, and 8 Series Ignitions and all MSD Timing Accessories.","brand":"MSD","offers":[{"title":"Default Title","offer_id":47303529693442,"sku":"BCCX_8610","price":519.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/8610_01.jpg?v=1769665194"}],"url":"https:\/\/www.lethalperformance.com\/collections\/sensors.oembed","provider":"Lethal Performance","version":"1.0","type":"link"}