{"title":"QA1","description":"\u003ch1\u003eqa1\u003c\/h1\u003e","products":[{"product_id":"qa1-2-1-2in-id-high-travel-spring-10in-length-x-200lbs-in-silver-powder-coated","title":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id 10\" X 200 Lbs\/In. Silver Pwdr Coat - 10HT200","description":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id 10\" X 200 Lbs\/In. Silver Pwdr Coat - 10HT200\u003cbr\u003e\u003cbr\u003eAvailable in 7\", 9\", 10\", 12\", 14\" and 16\" lengths, QA1 offers an assortment of high travel springs with a silver powder coated finish. Made in the USA, these 2\" I.D. high travel springs are manufactured from specially designed high-tensile, chrome silicon alloy spring wire, which allows them to have fewer coils and a smaller wire diameter. As a result, these springs are lighter and have increased travel due to the larger distance between the coils. These lighter springs reduce unsprung weight and react faster, optimizing suspension performance. In addition, this high-grade material, along with careful heat-treating and post-processing, allows for greatly improved fatigue life, and the coil design allows the springs to be compressed to coil-bind without affecting spring rate or free height. These new high travel springs are silver powder coated and ground at both ends for straight, consistent and accurate operations. In addition, all QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions. Chrome Silicon Steel, All QA1 springs are manufactured using the highest quality materials for high strength, consistency and long life. Cold Wound - Heat Treated - Shot Peened, All QA1 springs go through intensive manufacturing processes to ensure consistency, accuracy and durability. Squared Ends, All QA1 springs are ground at both ends to ensure straight, consistent and accurate operation. Lengths and Rates Marked, All QA1 springs are clearly marked with the free length of the spring and spring rate for quick and easy identification. Made in the USA, QA1's high travel springs are proudly made in the USA. LIFETIME GUARANTEE, All QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions.\u003cbr\u003e\u003cbr\u003eHigh travel coil spring with a 200 lb spring rate. Made with chrome silicon and has a silver powder coat finish. 2-1\/2\" inner diameter and a 10\" length.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082051830018,"sku":"QAP10HT200","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/10HT275_22.jpg?v=1784945424"},{"product_id":"qa1-2-1-2in-id-high-travel-spring-10in-length-x-200lbs-in-black-powder-coated","title":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id, 10\" X 200 Lbs\/In. Black Pwdr Coat - 10HT200B","description":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id, 10\" X 200 Lbs\/In. Black Pwdr Coat - 10HT200B\u003cbr\u003e\u003cbr\u003eQA1 offers an assortment of high travel springs with a black powder coated finish. Made in the USA, these 2\" I.D. high travel springs are manufactured from specially designed high-tensile, chrome silicon alloy spring wire, which allows them to have fewer coils and a smaller wire diameter. As a result, these springs are lighter and have increased travel due to the larger distance between the coils. These lighter springs reduce unsprung weight and react faster, optimizing suspension performance. QA1's high travel springs are proudly made in the USA. All QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions.\u003cbr\u003e\u003cbr\u003eHigh travel coil spring with a 200 lb spring rate. Made with chrome silicon and has a black powder coat finish. 2-1\/2\" inner diameter and a 10\" length.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082051895554,"sku":"QAP10HT200B","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/10HT275_Black_520.jpg?v=1784945421"},{"product_id":"qa1-2-1-2in-id-high-travel-spring-10in-length-x-450lbs-in-silver-powder-coated","title":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id 10\" X 450 Lbs\/In. Silver Pwdr Coat - 10HT450","description":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id 10\" X 450 Lbs\/In. Silver Pwdr Coat - 10HT450\u003cbr\u003e\u003cbr\u003eAvailable in 7\", 9\", 10\", 12\", 14\" and 16\" lengths, QA1 offers an assortment of high travel springs with a silver powder coated finish. Made in the USA, these 2\" I.D. high travel springs are manufactured from specially designed high-tensile, chrome silicon alloy spring wire, which allows them to have fewer coils and a smaller wire diameter. As a result, these springs are lighter and have increased travel due to the larger distance between the coils. These lighter springs reduce unsprung weight and react faster, optimizing suspension performance. In addition, this high-grade material, along with careful heat-treating and post-processing, allows for greatly improved fatigue life, and the coil design allows the springs to be compressed to coil-bind without affecting spring rate or free height. These new high travel springs are silver powder coated and ground at both ends for straight, consistent and accurate operations. In addition, all QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions. Chrome Silicon Steel, All QA1 springs are manufactured using the highest quality materials for high strength, consistency and long life. Cold Wound - Heat Treated - Shot Peened, All QA1 springs go through intensive manufacturing processes to ensure consistency, accuracy and durability. Squared Ends, All QA1 springs are ground at both ends to ensure straight, consistent and accurate operation. Lengths and Rates Marked, All QA1 springs are clearly marked with the free length of the spring and spring rate for quick and easy identification. Made in the USA, QA1's high travel springs are proudly made in the USA. LIFETIME GUARANTEE, All QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions.\u003cbr\u003e\u003cbr\u003eHigh travel coil spring with a 450 lb spring rate. Made with chrome silicon and has a silver powder coat finish. 2-1\/2\" inner diameter and a 10\" length.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082052157698,"sku":"QAP10HT450","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/10HT275_12.jpg?v=1784945423"},{"product_id":"qa1-4-1-8in-id-tapered-high-travel-spring-11in-length-x-250lbs-in-silver-powder-coated","title":"QA1 Spring, Cr-Si Ht High Travel 4.125\" 11\" X 250 Lbs\/In. Tapered Silver Pc (1970-2004 Oldsmobile, Pontiac, Buick, Chevrolet, GMC Fitment) - 11HTBF250","description":"QA1 Spring, Cr-Si Ht High Travel 4.125\" 11\" X 250 Lbs\/In. Tapered Silver Pc (1970-2004 Oldsmobile, Pontiac, Buick, Chevrolet, GMC Fitment) - 11HTBF250\u003cbr\u003e\u003cbr\u003eAvailable in 7\", 9\", 10\", 12\", 14\" and 16\" lengths, QA1 offers an assortment of high travel springs with a silver powder coated finish. Made in the USA, these 2\" I.D. high travel springs are manufactured from specially designed high-tensile, chrome silicon alloy spring wire, which allows them to have fewer coils and a smaller wire diameter. As a result, these springs are lighter and have increased travel due to the larger distance between the coils. These lighter springs reduce unsprung weight and react faster, optimizing suspension performance. In addition, this high-grade material, along with careful heat-treating and post-processing, allows for greatly improved fatigue life, and the coil design allows the springs to be compressed to coil-bind without affecting spring rate or free height. These new high travel springs are silver powder coated and ground at both ends for straight, consistent and accurate operations. In addition, all QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions. Chrome Silicon Steel, All QA1 springs are manufactured using the highest quality materials for high strength, consistency and long life. Cold Wound - Heat Treated - Shot Peened, All QA1 springs go through intensive manufacturing processes to ensure consistency, accuracy and durability. Squared Ends, All QA1 springs are ground at both ends to ensure straight, consistent and accurate operation. Lengths and Rates Marked, All QA1 springs are clearly marked with the free length of the spring and spring rate for quick and easy identification. Made in the USA, QA1's high travel springs are proudly made in the USA. LIFETIME GUARANTEE, All QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions.\u003cbr\u003e\u003cbr\u003eHigh travel coil spring with a 250 lb spring rate. Tapered end. Made with chrome silicon and has a silver powder coat finish. 2-1\/2\" inner diameter and a 11\" length.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082052223234,"sku":"QAP11HTBF250","price":104.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/10HT275_31.jpg?v=1784945430"},{"product_id":"qa1-2-1-2in-id-high-travel-spring-12in-length-x-110lbs-in-silver-powder-coated","title":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id 12\" X 110 Lbs\/In. Silver Pwdr Coat - 12HT110","description":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id 12\" X 110 Lbs\/In. Silver Pwdr Coat - 12HT110\u003cbr\u003e\u003cbr\u003eAvailable in 7\", 9\", 10\", 12\", 14\" and 16\" lengths, QA1 offers an assortment of high travel springs with a silver powder coated finish. Made in the USA, these 2\" I.D. high travel springs are manufactured from specially designed high-tensile, chrome silicon alloy spring wire, which allows them to have fewer coils and a smaller wire diameter. As a result, these springs are lighter and have increased travel due to the larger distance between the coils. These lighter springs reduce unsprung weight and react faster, optimizing suspension performance. In addition, this high-grade material, along with careful heat-treating and post-processing, allows for greatly improved fatigue life, and the coil design allows the springs to be compressed to coil-bind without affecting spring rate or free height. These new high travel springs are silver powder coated and ground at both ends for straight, consistent and accurate operations. In addition, all QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions. Chrome Silicon Steel, All QA1 springs are manufactured using the highest quality materials for high strength, consistency and long life. Cold Wound - Heat Treated - Shot Peened, All QA1 springs go through intensive manufacturing processes to ensure consistency, accuracy and durability. Squared Ends, All QA1 springs are ground at both ends to ensure straight, consistent and accurate operation. Lengths and Rates Marked, All QA1 springs are clearly marked with the free length of the spring and spring rate for quick and easy identification. Made in the USA, QA1's high travel springs are proudly made in the USA. LIFETIME GUARANTEE, All QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions.\u003cbr\u003e\u003cbr\u003eHigh travel coil spring with a 110 lb spring rate. Made with chrome silicon and has a silver powder coat finish. 2-1\/2\" inner diameter and a 12\" length.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082052321538,"sku":"QAP12HT110","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/12HT250_12.jpg?v=1784945440"},{"product_id":"qa1-2-1-2in-id-high-travel-spring-12in-length-x-110lbs-in-black-powder-coated","title":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id, 12\" X 110 Lbs\/In. Black Pwdr Coat - 12HT110B","description":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id, 12\" X 110 Lbs\/In. Black Pwdr Coat - 12HT110B\u003cbr\u003e\u003cbr\u003eQA1 offers an assortment of high travel springs with a black powder coated finish. Made in the USA, these 2\" I.D. high travel springs are manufactured from specially designed high-tensile, chrome silicon alloy spring wire, which allows them to have fewer coils and a smaller wire diameter. As a result, these springs are lighter and have increased travel due to the larger distance between the coils. These lighter springs reduce unsprung weight and react faster, optimizing suspension performance. QA1's high travel springs are proudly made in the USA. All QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions.\u003cbr\u003e\u003cbr\u003eHigh travel coil spring with a 110 lb spring rate. Made with chrome silicon and has a black powder coat finish. 2-1\/2\" inner diameter and a 12\" length.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082052387074,"sku":"QAP12HT110B","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/10HT275_Black_39.jpg?v=1784945429"},{"product_id":"qa1-2-1-2in-id-high-travel-spring-12in-length-x-130lbs-in-silver-powder-coated","title":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id 12\" X 130 Lbs\/In. Silver Pwdr Coat - 12HT130","description":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id 12\" X 130 Lbs\/In. Silver Pwdr Coat - 12HT130\u003cbr\u003e\u003cbr\u003eAvailable in 7\", 9\", 10\", 12\", 14\" and 16\" lengths, QA1 offers an assortment of high travel springs with a silver powder coated finish. Made in the USA, these 2\" I.D. high travel springs are manufactured from specially designed high-tensile, chrome silicon alloy spring wire, which allows them to have fewer coils and a smaller wire diameter. As a result, these springs are lighter and have increased travel due to the larger distance between the coils. These lighter springs reduce unsprung weight and react faster, optimizing suspension performance. In addition, this high-grade material, along with careful heat-treating and post-processing, allows for greatly improved fatigue life, and the coil design allows the springs to be compressed to coil-bind without affecting spring rate or free height. These new high travel springs are silver powder coated and ground at both ends for straight, consistent and accurate operations. In addition, all QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions. Chrome Silicon Steel, All QA1 springs are manufactured using the highest quality materials for high strength, consistency and long life. Cold Wound - Heat Treated - Shot Peened, All QA1 springs go through intensive manufacturing processes to ensure consistency, accuracy and durability. Squared Ends, All QA1 springs are ground at both ends to ensure straight, consistent and accurate operation. Lengths and Rates Marked, All QA1 springs are clearly marked with the free length of the spring and spring rate for quick and easy identification. Made in the USA, QA1's high travel springs are proudly made in the USA. LIFETIME GUARANTEE, All QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions.\u003cbr\u003e\u003cbr\u003eHigh travel coil spring with a 130 lb spring rate. Made with chrome silicon and has a silver powder coat finish. 2-1\/2\" inner diameter and a 12\" length.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082052485378,"sku":"QAP12HT130","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/12HT250_13.jpg?v=1784945395"},{"product_id":"qa1-2-1-2in-id-high-travel-spring-12in-length-x-150lbs-in-silver-powder-coated","title":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id 12\" X 150 Lbs\/In. Silver Pwdr Coat - 12HT150","description":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id 12\" X 150 Lbs\/In. Silver Pwdr Coat - 12HT150\u003cbr\u003e\u003cbr\u003eAvailable in 7\", 9\", 10\", 12\", 14\" and 16\" lengths, QA1 offers an assortment of high travel springs with a silver powder coated finish. Made in the USA, these 2\" I.D. high travel springs are manufactured from specially designed high-tensile, chrome silicon alloy spring wire, which allows them to have fewer coils and a smaller wire diameter. As a result, these springs are lighter and have increased travel due to the larger distance between the coils. These lighter springs reduce unsprung weight and react faster, optimizing suspension performance. In addition, this high-grade material, along with careful heat-treating and post-processing, allows for greatly improved fatigue life, and the coil design allows the springs to be compressed to coil-bind without affecting spring rate or free height. These new high travel springs are silver powder coated and ground at both ends for straight, consistent and accurate operations. In addition, all QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions. Chrome Silicon Steel, All QA1 springs are manufactured using the highest quality materials for high strength, consistency and long life. Cold Wound - Heat Treated - Shot Peened, All QA1 springs go through intensive manufacturing processes to ensure consistency, accuracy and durability. Squared Ends, All QA1 springs are ground at both ends to ensure straight, consistent and accurate operation. Lengths and Rates Marked, All QA1 springs are clearly marked with the free length of the spring and spring rate for quick and easy identification. Made in the USA, QA1's high travel springs are proudly made in the USA. LIFETIME GUARANTEE, All QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions.\u003cbr\u003e\u003cbr\u003eHigh travel coil spring with a 150 lb spring rate. Made with chrome silicon and has a silver powder coat finish. 2-1\/2\" inner diameter and a 12\" length.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082052550914,"sku":"QAP12HT150","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/12HT250_14.jpg?v=1784945395"},{"product_id":"qa1-2-1-2in-id-high-travel-spring-12in-length-x-150lbs-in-black-powder-coated","title":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id, 12\" X 150 Lbs\/In. Black Pwdr Coat - 12HT150B","description":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id, 12\" X 150 Lbs\/In. Black Pwdr Coat - 12HT150B\u003cbr\u003e\u003cbr\u003eQA1 offers an assortment of high travel springs with a black powder coated finish. Made in the USA, these 2\" I.D. high travel springs are manufactured from specially designed high-tensile, chrome silicon alloy spring wire, which allows them to have fewer coils and a smaller wire diameter. As a result, these springs are lighter and have increased travel due to the larger distance between the coils. These lighter springs reduce unsprung weight and react faster, optimizing suspension performance. QA1's high travel springs are proudly made in the USA. All QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions.\u003cbr\u003e\u003cbr\u003eHigh travel coil spring with a 150 lb spring rate. Made with chrome silicon and has a black powder coat finish. 2-1\/2\" inner diameter and a 12\" length.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082052649218,"sku":"QAP12HT150B","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/10HT275_Black_517.jpg?v=1784945396"},{"product_id":"qa1-2-1-2in-id-high-travel-spring-12in-length-x-170lbs-in-silver-powder-coated","title":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id 12\" X 170 Lbs\/In. Silver Pwdr Coat - 12HT170","description":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id 12\" X 170 Lbs\/In. Silver Pwdr Coat - 12HT170\u003cbr\u003e\u003cbr\u003eAvailable in 7\", 9\", 10\", 12\", 14\" and 16\" lengths, QA1 offers an assortment of high travel springs with a silver powder coated finish. Made in the USA, these 2\" I.D. high travel springs are manufactured from specially designed high-tensile, chrome silicon alloy spring wire, which allows them to have fewer coils and a smaller wire diameter. As a result, these springs are lighter and have increased travel due to the larger distance between the coils. These lighter springs reduce unsprung weight and react faster, optimizing suspension performance. In addition, this high-grade material, along with careful heat-treating and post-processing, allows for greatly improved fatigue life, and the coil design allows the springs to be compressed to coil-bind without affecting spring rate or free height. These new high travel springs are silver powder coated and ground at both ends for straight, consistent and accurate operations. In addition, all QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions. Chrome Silicon Steel, All QA1 springs are manufactured using the highest quality materials for high strength, consistency and long life. Cold Wound - Heat Treated - Shot Peened, All QA1 springs go through intensive manufacturing processes to ensure consistency, accuracy and durability. Squared Ends, All QA1 springs are ground at both ends to ensure straight, consistent and accurate operation. Lengths and Rates Marked, All QA1 springs are clearly marked with the free length of the spring and spring rate for quick and easy identification. Made in the USA, QA1's high travel springs are proudly made in the USA. LIFETIME GUARANTEE, All QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions.\u003cbr\u003e\u003cbr\u003eHigh travel coil spring with a 170 lb spring rate. Made with chrome silicon and has a silver powder coat finish. 2-1\/2\" inner diameter and a 12\" length.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082052714754,"sku":"QAP12HT170","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/12HT250_15.jpg?v=1784945395"},{"product_id":"qa1-2-1-2in-id-high-travel-spring-12in-length-x-350lbs-in-black-powder-coated","title":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id, 12\" X 350 Lbs\/In. Black Pwdr Coat - 12HT350B","description":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id, 12\" X 350 Lbs\/In. Black Pwdr Coat - 12HT350B\u003cbr\u003e\u003cbr\u003eQA1 offers an assortment of high travel springs with a black powder coated finish. Made in the USA, these 2\" I.D. high travel springs are manufactured from specially designed high-tensile, chrome silicon alloy spring wire, which allows them to have fewer coils and a smaller wire diameter. As a result, these springs are lighter and have increased travel due to the larger distance between the coils. These lighter springs reduce unsprung weight and react faster, optimizing suspension performance. QA1's high travel springs are proudly made in the USA. All QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions.\u003cbr\u003e\u003cbr\u003eHigh travel coil spring with a 350 lb spring rate. Made with chrome silicon and has a black powder coat finish. 2-1\/2\" inner diameter and a 12\" length.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082052780290,"sku":"QAP12HT350B","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/10HT275_Black_528.jpg?v=1784945401"},{"product_id":"qa1-2-1-2in-id-high-travel-spring-14in-length-x-110lbs-in-silver-powder-coated","title":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id 14\" X 110 Lbs\/In. Silver Pwdr Coat - 14HT110","description":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id 14\" X 110 Lbs\/In. Silver Pwdr Coat - 14HT110\u003cbr\u003e\u003cbr\u003eAvailable in 7\", 9\", 10\", 12\", 14\" and 16\" lengths, QA1 offers an assortment of high travel springs with a silver powder coated finish. Made in the USA, these 2\" I.D. high travel springs are manufactured from specially designed high-tensile, chrome silicon alloy spring wire, which allows them to have fewer coils and a smaller wire diameter. As a result, these springs are lighter and have increased travel due to the larger distance between the coils. These lighter springs reduce unsprung weight and react faster, optimizing suspension performance. In addition, this high-grade material, along with careful heat-treating and post-processing, allows for greatly improved fatigue life, and the coil design allows the springs to be compressed to coil-bind without affecting spring rate or free height. These new high travel springs are silver powder coated and ground at both ends for straight, consistent and accurate operations. In addition, all QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions. Chrome Silicon Steel, All QA1 springs are manufactured using the highest quality materials for high strength, consistency and long life. Cold Wound - Heat Treated - Shot Peened, All QA1 springs go through intensive manufacturing processes to ensure consistency, accuracy and durability. Squared Ends, All QA1 springs are ground at both ends to ensure straight, consistent and accurate operation. Lengths and Rates Marked, All QA1 springs are clearly marked with the free length of the spring and spring rate for quick and easy identification. Made in the USA, QA1's high travel springs are proudly made in the USA. LIFETIME GUARANTEE, All QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions.\u003cbr\u003e\u003cbr\u003eHigh travel coil spring with a 110 lb spring rate. Made with chrome silicon and has a silver powder coat finish. 2-1\/2\" inner diameter and a 14\" length.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082052878594,"sku":"QAP14HT110","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/14HT250_2.jpg?v=1784945400"},{"product_id":"qa1-2-1-2in-id-high-travel-spring-14in-length-x-130lbs-in-silver-powder-coated","title":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id 14\" X 130 Lbs\/In. Silver Pwdr Coat - 14HT130","description":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id 14\" X 130 Lbs\/In. Silver Pwdr Coat - 14HT130\u003cbr\u003e\u003cbr\u003eAvailable in 7\", 9\", 10\", 12\", 14\" and 16\" lengths, QA1 offers an assortment of high travel springs with a silver powder coated finish. Made in the USA, these 2\" I.D. high travel springs are manufactured from specially designed high-tensile, chrome silicon alloy spring wire, which allows them to have fewer coils and a smaller wire diameter. As a result, these springs are lighter and have increased travel due to the larger distance between the coils. These lighter springs reduce unsprung weight and react faster, optimizing suspension performance. In addition, this high-grade material, along with careful heat-treating and post-processing, allows for greatly improved fatigue life, and the coil design allows the springs to be compressed to coil-bind without affecting spring rate or free height. These new high travel springs are silver powder coated and ground at both ends for straight, consistent and accurate operations. In addition, all QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions. Chrome Silicon Steel, All QA1 springs are manufactured using the highest quality materials for high strength, consistency and long life. Cold Wound - Heat Treated - Shot Peened, All QA1 springs go through intensive manufacturing processes to ensure consistency, accuracy and durability. Squared Ends, All QA1 springs are ground at both ends to ensure straight, consistent and accurate operation. Lengths and Rates Marked, All QA1 springs are clearly marked with the free length of the spring and spring rate for quick and easy identification. Made in the USA, QA1's high travel springs are proudly made in the USA. LIFETIME GUARANTEE, All QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions.\u003cbr\u003e\u003cbr\u003eHigh travel coil spring with a 130 lb spring rate. Made with chrome silicon and has a silver powder coat finish. 2-1\/2\" inner diameter and a 14\" length.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082052976898,"sku":"QAP14HT130","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/14HT250_3.jpg?v=1784945401"},{"product_id":"qa1-2-1-2in-id-high-travel-spring-14in-length-x-130lbs-in-black-powder-coated","title":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id, 14\" X 130 Lbs\/In. Black Pwdr Coat - 14HT130B","description":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id, 14\" X 130 Lbs\/In. Black Pwdr Coat - 14HT130B\u003cbr\u003e\u003cbr\u003eQA1 offers an assortment of high travel springs with a black powder coated finish. Made in the USA, these 2\" I.D. high travel springs are manufactured from specially designed high-tensile, chrome silicon alloy spring wire, which allows them to have fewer coils and a smaller wire diameter. As a result, these springs are lighter and have increased travel due to the larger distance between the coils. These lighter springs reduce unsprung weight and react faster, optimizing suspension performance. QA1's high travel springs are proudly made in the USA. All QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions.\u003cbr\u003e\u003cbr\u003eHigh travel coil spring with a 130 lb spring rate. Made with chrome silicon and has a black powder coat finish. 2-1\/2\" inner diameter and a 14\" length.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082053042434,"sku":"QAP14HT130B","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/10HT275_Black_365.jpg?v=1784945395"},{"product_id":"qa1-2-1-2in-id-high-travel-spring-14in-length-x-150lbs-in-black-powder-coated","title":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id, 14\" X 150 Lbs\/In. Black Pwdr Coat - 14HT150B","description":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id, 14\" X 150 Lbs\/In. Black Pwdr Coat - 14HT150B\u003cbr\u003e\u003cbr\u003eQA1 offers an assortment of high travel springs with a black powder coated finish. Made in the USA, these 2\" I.D. high travel springs are manufactured from specially designed high-tensile, chrome silicon alloy spring wire, which allows them to have fewer coils and a smaller wire diameter. As a result, these springs are lighter and have increased travel due to the larger distance between the coils. These lighter springs reduce unsprung weight and react faster, optimizing suspension performance. QA1's high travel springs are proudly made in the USA. All QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions.\u003cbr\u003e\u003cbr\u003eHigh travel coil spring with a 150 lb spring rate. Made with chrome silicon and has a black powder coat finish. 2-1\/2\" inner diameter and a 14\" length.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082053140738,"sku":"QAP14HT150B","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/10HT275_Black_367_1.jpg?v=1784945402"},{"product_id":"qa1-2-1-2in-id-high-travel-spring-14in-length-x-250lbs-in-silver-powder-coated","title":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id 14\" X 250 Lbs\/In. Silver Pwdr Coat - 14HT250","description":"QA1 Spring, Cr-Si High Travel 2-1\/2\" Id 14\" X 250 Lbs\/In. Silver Pwdr Coat - 14HT250\u003cbr\u003e\u003cbr\u003eAvailable in 7\", 9\", 10\", 12\", 14\" and 16\" lengths, QA1 offers an assortment of high travel springs with a silver powder coated finish. Made in the USA, these 2\" I.D. high travel springs are manufactured from specially designed high-tensile, chrome silicon alloy spring wire, which allows them to have fewer coils and a smaller wire diameter. As a result, these springs are lighter and have increased travel due to the larger distance between the coils. These lighter springs reduce unsprung weight and react faster, optimizing suspension performance. In addition, this high-grade material, along with careful heat-treating and post-processing, allows for greatly improved fatigue life, and the coil design allows the springs to be compressed to coil-bind without affecting spring rate or free height. These new high travel springs are silver powder coated and ground at both ends for straight, consistent and accurate operations. In addition, all QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions. Chrome Silicon Steel, All QA1 springs are manufactured using the highest quality materials for high strength, consistency and long life. Cold Wound - Heat Treated - Shot Peened, All QA1 springs go through intensive manufacturing processes to ensure consistency, accuracy and durability. Squared Ends, All QA1 springs are ground at both ends to ensure straight, consistent and accurate operation. Lengths and Rates Marked, All QA1 springs are clearly marked with the free length of the spring and spring rate for quick and easy identification. Made in the USA, QA1's high travel springs are proudly made in the USA. LIFETIME GUARANTEE, All QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions.\u003cbr\u003e\u003cbr\u003eHigh travel coil spring with a 250 lb spring rate. Made with chrome silicon and has a silver powder coat finish. 2-1\/2\" inner diameter and a 14\" length.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082053206274,"sku":"QAP14HT250","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/14HT250_8.jpg?v=1784945399"},{"product_id":"qa1-71-96-gm-b-body-trailing-arms-lower-adjustable","title":"QA1 Trailing Arms, Lower, Adjustable, 71-96 Gm B-Body (1971-1996 Impala, Caprice) - 5201","description":"QA1 Trailing Arms, Lower, Adjustable, 71-96 Gm B-Body (1971-1996 Impala, Caprice) - 5201\u003cbr\u003e\u003cbr\u003eBig Wheel Adjustable Lower Trailing Arms, 71-96 GM B-Body\u003cbr\u003e\u003cbr\u003eAdjustable Lower Rear Trailing Arms, 71-96 GM B-Body\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082053370114,"sku":"QAP5201","price":499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/71-96_20B-Body_20Adjustable_20Trailing_20Arm.jpg?v=1784945401"},{"product_id":"qa1-64-72-gm-a-body-lower-boxed-trailing-arms","title":"QA1 Trailing Arms, Lower 64-72 Gm A Body - 5205","description":"QA1 Trailing Arms, Lower 64-72 Gm A Body - 5205\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of QA1 products!\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eFrom bolt-on products that get you behind the wheel faster, to experienced technicians available to help increase your 60’ times or handle curves with confidence, everything we do is designed to get you out on the road.\u003cbr\u003e\u003cbr\u003e\n\nWhether your goal is a Saturday night sprint across the checkered flag or a slow, easy cruise down main street, we have the suspension and driveline products you need for the experience you want.\u003cbr\u003e\u003cbr\u003e\nOur #1 priority at QA1 is quality, which is why our quality system is certified to the ISO 9001 standard. QA1’s products are designed, built, and tested to ensure consistent quality, ultimate reliability, and unbeatable performance. We follow strict processes, use precision machinery, and inspect all of our products to ensure the quality meets our high standards.\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082053435650,"sku":"QAP5205","price":374.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/Trailing_Arms_Lower_5204-5205_1.jpg?v=1784945399"},{"product_id":"qa1-68-72-gm-a-body-non-adjustable-rear-frame-support","title":"QA1 Trailing Arm Brace, 68-72 Gm A-Body Non-Adjustable (1968-1972 Buick, Chevrolet, GMC, Oldsmobile, Pontiac Fitment) - 5211","description":"QA1 Trailing Arm Brace, 68-72 Gm A-Body Non-Adjustable (1968-1972 Buick, Chevrolet, GMC, Oldsmobile, Pontiac Fitment) - 5211\u003cbr\u003e\u003cbr\u003eTubular braces work with GM A-Body and G-Body trailing arms to reinforce the rear trailing arm mounts for major improvements in traction with less wheel-hop and more power to the ground. Includes all necessary hardware for installation and are sold in pairs.\u003cbr\u003e\u003cbr\u003eNon-adjustable tubular brace for a 68-72 GM A-body.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082053533954,"sku":"QAP5211","price":187.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/Frame_Support_5210_5211_5212_1.jpg?v=1784945400"},{"product_id":"qa1-79-95-ford-mustang-5-0l-k-member-engine-mount-kit","title":"QA1 Engine Mount Kit, Mustang 5.0L Muk11-Muk13, 79-95 Mustang (1979-1995 Mustang) - 52113","description":"QA1 Engine Mount Kit, Mustang 5.0L Muk11-Muk13, 79-95 Mustang (1979-1995 Mustang) - 52113\u003cbr\u003e\u003cbr\u003eNeed to upgrade your Mustang's engine and already have a QA1 K-member? All you need are the new engine mounts and you'll be good to go. For QA1 Mustang K-members only. Made in the USA.\u003cbr\u003e\u003cbr\u003eEngine Mounts for QA1 K-member for 5.0 engines. Fits 79-95 Mustangs.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082053599490,"sku":"QAP52113","price":113.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/Motor_Mounts_Mustang_52113_52114.jpg?v=1784945397"},{"product_id":"qa1-96-04-ford-mustang-4-6l-k-member-engine-mount-kit","title":"QA1 52114 Engine Mounts for 96-04 Mustangs","description":"Getting a larger 4.6L or 5.4L engine into your late-model Mustang means making some changes under the hood, that's why QA1 designed this brand-new motor mount kit just for you! The direct-fit, upgraded motor mount is crafted from high-quality heavy-gauge steel and features a black powder-coat finish for increased durability. It will quickly and easily install onto your QA1 K-Member (sold separately) and will help provide additional support and stability to your engine.\u003cbr\u003e\u003cbr\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\nDirect-fit for 1979-2004 4.6L and 5.4L Mustangs with a QA1 k-member\u003cbr\u003e\nBolt-on installation onto the QA1 k-member\u003cbr\u003e\nManufactured from heavy-gauge steel with a black powder coated finish\u003cbr\u003e\nAllows you to install an upgraded engine into your pony\u003cbr\u003e\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e This motor mount will only fit 1979-2004 4.6L and 5.4L Mustangs that already have a QA1 k-member (sold separately) installed.","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082053665026,"sku":"QAP52114","price":113.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/Motor_Mounts_Mustang_52113_52114_1.jpg?v=1784945397"},{"product_id":"qa1-79-04-ford-mustang-ls-k-member-engine-mount-kit","title":"QA1 Engine Mount Kit, Mustang Ls Muk21, 79-04 Mustang (1979-2004 Mustang) - 52115","description":"QA1 Engine Mount Kit, Mustang Ls Muk21, 79-04 Mustang (1979-2004 Mustang) - 52115\u003cbr\u003e\u003cbr\u003eUpgrade your Mustang's engine and already have a QA1 K-member? All you need are the new engine mounts and you'll be good to go. For QA1 Mustang K-members only. Made in the USA.\u003cbr\u003e\u003cbr\u003eEngine Mounts for QA1 K-member for LS engines.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082053763330,"sku":"QAP52115","price":113.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/Motor_Mounts_LS_52115.jpg?v=1784945400"},{"product_id":"qa1-64-72-gm-a-body-anti-hop-bars-rear","title":"QA1 Anti-Hop Bars, 64-72 Gm A-Body 64-72 Gm A-Body - 5213","description":"QA1 Anti-Hop Bars, 64-72 Gm A-Body 64-72 Gm A-Body - 5213\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of QA1 products!\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eFrom bolt-on products that get you behind the wheel faster, to experienced technicians available to help increase your 60’ times or handle curves with confidence, everything we do is designed to get you out on the road.\u003cbr\u003e\u003cbr\u003e\n\nWhether your goal is a Saturday night sprint across the checkered flag or a slow, easy cruise down main street, we have the suspension and driveline products you need for the experience you want.\u003cbr\u003e\u003cbr\u003e\nOur #1 priority at QA1 is quality, which is why our quality system is certified to the ISO 9001 standard. QA1’s products are designed, built, and tested to ensure consistent quality, ultimate reliability, and unbeatable performance. We follow strict processes, use precision machinery, and inspect all of our products to ensure the quality meets our high standards.\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082053861634,"sku":"QAP5213","price":305.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/Anti-Hop_Bars_5213.jpg?v=1784945397"},{"product_id":"qa1-79-04-ford-mustang-79-86-mercury-capri-lower-boxed-trailing-arms","title":"QA1 Trailing Arms, Lower 79-04 Mustang \u0026 1979-86 Capri - 5221","description":"QA1 Trailing Arms, Lower 79-04 Mustang \u0026amp; 1979-86 Capri - 5221\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of QA1 products!\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eFrom bolt-on products that get you behind the wheel faster, to experienced technicians available to help increase your 60’ times or handle curves with confidence, everything we do is designed to get you out on the road.\u003cbr\u003e\u003cbr\u003e\n\nWhether your goal is a Saturday night sprint across the checkered flag or a slow, easy cruise down main street, we have the suspension and driveline products you need for the experience you want.\u003cbr\u003e\u003cbr\u003e\nOur #1 priority at QA1 is quality, which is why our quality system is certified to the ISO 9001 standard. QA1’s products are designed, built, and tested to ensure consistent quality, ultimate reliability, and unbeatable performance. We follow strict processes, use precision machinery, and inspect all of our products to ensure the quality meets our high standards.\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082053927170,"sku":"QAP5221","price":386.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/Trailing_Arms_5221.jpg?v=1784945395"},{"product_id":"qa1-78-88-gm-g-body-trailing-arms-lower-adjustable","title":"QA1 Qa1 Adjustable Rear Trailing Arms (1978-1988 Chevrolet, GMC, Buick, Pontiac, Oldsmobile Fitment) - 5234","description":"QA1 Qa1 Adjustable Rear Trailing Arms (1978-1988 Chevrolet, GMC, Buick, Pontiac, Oldsmobile Fitment) - 5234\u003cbr\u003e\u003cbr\u003eGet your wheel and tire package to fit with adjustable trailing arms that center your rear axle in the wheel well. Avoid common rubbing and fitment issues with 24” wheels. QA1 trailing arms provide up to 1” of adjustability. By lengthening or shortening the trailing arm, you are able to better position the wheel in the wheel opening. Parts come powder coated and ready to install with all necessary hardware. Easily bolt them up in your garage or work with your local shop.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082054287618,"sku":"QAP5234","price":499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/Adjustable-Rear-Lower-Trailing-Arm_5234.jpg?v=1784945401"},{"product_id":"qa1-62-72-70-74-mopar-b-e-body-suspension-system-0-2in-drop-single-adjustable-front","title":"QA1 Suspension System, Front, 0-2\" Drop (1966-1974 Dodge, Plymouth Fitment) - 52346-S400","description":"QA1 Suspension System, Front, 0-2\" Drop (1966-1974 Dodge, Plymouth Fitment) - 52346-S400\u003cbr\u003e\u003cbr\u003eConvert your classic Dodge Charger, Dodge Challenger, and Plymouth Barracuda from torsion bar suspension to a QA1 coil-over system. Kits include a tubular K member for reduced weight and room for big-tube headers. Modular motor mounts offer many engine options-including Gen 3 Hemis. Systems easily bolt-in without any cutting or welding. QA1 tubular control arms and rack-and-pinion steering greatly improve drivability and performance while providing a modern feel. Kits include single- or double-adjustable QA1 coil-overs to easily dial in your preferred ride quality and ride height. Optional MOD Series shocks provide peak performance on the track and drag strip. Kits are available in drag or handling configurations. Drag kits use rod ends on both upper and lower control arms to improve weight transfer by reducing deflection. They include a lighter spring rate to improve rear grip during hard launches. Drag kits offer 0\"-2\" of drop. Handling kits use poly bushings on lower control arms to provide improved cornering and reduced NVH. They incorporate a heavier spring rate for increased front-end stability. Handling kits are available with 0\"-2\" or 2\"-4\" of drop. Both kits can be paired with an optional QA1 front sway bar. QA1 systems are made in the USA. Single- and double-adjustable shocks are eligible for a Limited Lifetime Warranty. Fitment notes: Single-adjustable shocks are recommended for cars used primarily on the street. Double-adjustable coil-overs are recommended for consistent drag racing, autocross or road racing. MOD Series shocks are recommended for maximum tunability and higher force curves. Gen 3 Hemi power steering pumps require a pressure reducer and the installation of a power steering cooler. Coil-overs and control arms in this kit can NOT be used with other QA1 tubular products designed for torsion bar suspension. Kits use Mustang II spindles for plenty of brake options. Kits with 2\"-4\" of drop require wheels to be least 18\" in diameter.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082054353154,"sku":"QAP52346-S400","price":5363.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/QA1_Mopar_Coil-Over_Front_Suspension_System_Primary_4.png?v=1784945403"},{"product_id":"qa1-78-88-gm-g-body-73-77-a-body-upper-adjustable-trailing-arms","title":"QA1 Trailing Arms, Upper Adjustable 78-88 Gm G-Body, 73-77 Gm A-Body - 5247","description":"QA1 Trailing Arms, Upper Adjustable 78-88 Gm G-Body, 73-77 Gm A-Body - 5247\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of QA1 products!\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eFrom bolt-on products that get you behind the wheel faster, to experienced technicians available to help increase your 60’ times or handle curves with confidence, everything we do is designed to get you out on the road.\u003cbr\u003e\u003cbr\u003e\n\nWhether your goal is a Saturday night sprint across the checkered flag or a slow, easy cruise down main street, we have the suspension and driveline products you need for the experience you want.\u003cbr\u003e\u003cbr\u003e\nOur #1 priority at QA1 is quality, which is why our quality system is certified to the ISO 9001 standard. QA1’s products are designed, built, and tested to ensure consistent quality, ultimate reliability, and unbeatable performance. We follow strict processes, use precision machinery, and inspect all of our products to ensure the quality meets our high standards.\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082054418690,"sku":"QAP5247","price":374.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/Trailing_Arms_5247_5248_5249_5255.jpg?v=1784945398"},{"product_id":"qa1-68-72-gm-a-body-upper-adjustable-trailing-arms","title":"QA1 Trailing Arms, Upper Adjustable 68-72 Gm A-Body - 5248","description":"QA1 Trailing Arms, Upper Adjustable 68-72 Gm A-Body - 5248\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of QA1 products!\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eFrom bolt-on products that get you behind the wheel faster, to experienced technicians available to help increase your 60’ times or handle curves with confidence, everything we do is designed to get you out on the road.\u003cbr\u003e\u003cbr\u003e\n\nWhether your goal is a Saturday night sprint across the checkered flag or a slow, easy cruise down main street, we have the suspension and driveline products you need for the experience you want.\u003cbr\u003e\u003cbr\u003e\nOur #1 priority at QA1 is quality, which is why our quality system is certified to the ISO 9001 standard. QA1’s products are designed, built, and tested to ensure consistent quality, ultimate reliability, and unbeatable performance. We follow strict processes, use precision machinery, and inspect all of our products to ensure the quality meets our high standards.\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082054516994,"sku":"QAP5248","price":374.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/Trailing_Arms_5247_5248_5249_5255_1.jpg?v=1784945401"},{"product_id":"qa1-64-67-gm-a-body-upper-adjustable-trailing-arms","title":"QA1 Trailing Arms, Upper Adjustable 64-67 Gm A Body - 5249","description":"QA1 Trailing Arms, Upper Adjustable 64-67 Gm A Body - 5249\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of QA1 products!\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eFrom bolt-on products that get you behind the wheel faster, to experienced technicians available to help increase your 60’ times or handle curves with confidence, everything we do is designed to get you out on the road.\u003cbr\u003e\u003cbr\u003e\n\nWhether your goal is a Saturday night sprint across the checkered flag or a slow, easy cruise down main street, we have the suspension and driveline products you need for the experience you want.\u003cbr\u003e\u003cbr\u003e\nOur #1 priority at QA1 is quality, which is why our quality system is certified to the ISO 9001 standard. QA1’s products are designed, built, and tested to ensure consistent quality, ultimate reliability, and unbeatable performance. We follow strict processes, use precision machinery, and inspect all of our products to ensure the quality meets our high standards.\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082054582530,"sku":"QAP5249","price":374.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/Trailing_Arms_5247_5248_5249_5255_2.jpg?v=1784945401"},{"product_id":"qa1-heavy-duty-tie-rod-sleeve-kit-5-8-18-x-4-9in-sleeve-5-8-18-thread-x-5-65in-long-w-jam-nuts","title":"QA1 Tie Rod Sleeve Kit 5\/8-18 X 4.9\" 5\/8-18 Thread X 4.9\" Long (1967-1974 Apollo, Camaro, Chevy II, Nova, Omega, Firebird, Ventura) - 5251","description":"QA1 Tie Rod Sleeve Kit 5\/8-18 X 4.9\" 5\/8-18 Thread X 4.9\" Long (1967-1974 Apollo, Camaro, Chevy II, Nova, Omega, Firebird, Ventura) - 5251\u003cbr\u003e\u003cbr\u003eThese Heavy Duty Tie Rod Sleeves are manufactured from solid steel hex stock then zinc plated for durable good looks and corrosion resistance. These are stronger than stock OE split sleeves. Fits most AMC and GM applications. Sold in pairs. Part #5251 fits 1967-69 Camaro, 1968-74 Nova, 1965-70 Impala and more.\u003cbr\u003e\u003cbr\u003eTie rod sleeve kit for 67-69 Camaro, 68-74 Nova, 65-70 Impala and more. High performance replacement for Moog #ES350S. With a 5\/8-18 thread and 4.9\" long.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082054746370,"sku":"QAP5251","price":91.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/Tie_Rod_Sleeve_5250_5251_5252_5256_1.jpg?v=1784945398"},{"product_id":"qa1-70-81-gm-f-body-73-77-a-body-75-79-x-body-78-96-b-body-pro-touring-upper-control-arm-kit-front","title":"QA1 Upper, Pro-Touring, 70-81 F-Body 73-77 A-Body, 75-79 X-Body, 78-96 B-Body (1970-1996 Oldsmobile, Pontiac, Chevrolet, Buick, GMC Fitment) - 52518","description":"QA1 Upper, Pro-Touring, 70-81 F-Body 73-77 A-Body, 75-79 X-Body, 78-96 B-Body (1970-1996 Oldsmobile, Pontiac, Chevrolet, Buick, GMC Fitment) - 52518\u003cbr\u003e\u003cbr\u003eQA1?s Pro-Touring Control Arms are the answer to your handling needs for autocross and road course. Designed with QA1?s Ultra Low Friction Ball Joint, these arms will eliminate flex and provide bind-free movement. The one inch longer upper ball joint stud improves camber gain to keep the tire contact patch optimal for superior cornering grip. QA1?s ball joints are adjustable and rebuildable for tuning with different stud lengths. Configured for QA1 Pro Coil Systems with double shear lower mounting. The combination of high strength tubing and billet aluminum cross shafts make these arms amount to the lightest on the market with improved strength and durability. Robotically welded and high-quality powder coated these street control arms look great. All of these arms are designed to add 3-4 degrees of caster and 0.5 to 1 degree of negative camber when used together. When used independently they will add approximately half of the preceding numbers.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082054811906,"sku":"QAP52518","price":739.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/52518_1.jpg?v=1784945399"},{"product_id":"qa1-heavy-duty-tie-rod-sleeve-kit-11-16-18-x-3-5in-sleeve-11-16-18-thread-x-4-28in-long","title":"QA1 Tie Rod Sleeve Kit 11\/16-18 X 3.53\" 11\/16-18 Thread X 3.53\" Long (1965-1981 Buick, Chevrolet, Ford, GMC, Oldsmobile, Pontiac Fitment) - 5252","description":"QA1 Tie Rod Sleeve Kit 11\/16-18 X 3.53\" 11\/16-18 Thread X 3.53\" Long (1965-1981 Buick, Chevrolet, Ford, GMC, Oldsmobile, Pontiac Fitment) - 5252\u003cbr\u003e\u003cbr\u003eThese Heavy Duty Tie Rod Sleeves are manufactured from solid steel hex stock then zinc plated for durable good looks and corrosion resistance. These are stronger than stock OE split sleeves. Fits most AMC and GM applications. Sold in pairs. Part#5252 fits 1070-81 Camaro\/Firebird, 1975-79 Nova, 1971-77 A-Body, 1978-96 B-Body, 1973-87 GM 2wd Pick Up Truck, 1973-92 GM 2wd Suburban.\u003cbr\u003e\u003cbr\u003eTie rod sleeve kit for 70-81 Camaro, 75-79 Nova, 71-77 GM A-bodies, 78-96 GM B-bodies, 65-73 V8 Mustang, 71-99 GM 2wd Pickup, 73-92 GM 2wd Suburban. High performance replacement for Moog #ES2004S. With a 11\/16-18 thread and 3.53\" long.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082054910210,"sku":"QAP5252","price":91.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/Tie_Rod_Sleeve_5250_5251_5252_5256_2.jpg?v=1784945403"},{"product_id":"qa1-78-96-gm-b-body-upper-adjustable-trailing-arms","title":"QA1 Trailing Arms, Upper Adjustable 78-96 Gm B-Body - 5254","description":"QA1 Trailing Arms, Upper Adjustable 78-96 Gm B-Body - 5254\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of QA1 products!\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eFrom bolt-on products that get you behind the wheel faster, to experienced technicians available to help increase your 60’ times or handle curves with confidence, everything we do is designed to get you out on the road.\u003cbr\u003e\u003cbr\u003e\n\nWhether your goal is a Saturday night sprint across the checkered flag or a slow, easy cruise down main street, we have the suspension and driveline products you need for the experience you want.\u003cbr\u003e\u003cbr\u003e\nOur #1 priority at QA1 is quality, which is why our quality system is certified to the ISO 9001 standard. QA1’s products are designed, built, and tested to ensure consistent quality, ultimate reliability, and unbeatable performance. We follow strict processes, use precision machinery, and inspect all of our products to ensure the quality meets our high standards.\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082054975746,"sku":"QAP5254","price":374.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/Trailing_Arms_Upper_5254.jpg?v=1784945406"},{"product_id":"qa1-63-87-chevrolet-c10-w-uca-front-coil-over-conversion-kit-single-adjustable-750lbs-in","title":"QA1 Front Coil-Over Suspension System, S-Adj 63-87 C10, Sgl Adj 750 Lb Springs - 52611-S750","description":"QA1 Front Coil-Over Suspension System, S-Adj 63-87 C10, Sgl Adj 750 Lb Springs - 52611-S750\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of QA1 products!\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eFrom bolt-on products that get you behind the wheel faster, to experienced technicians available to help increase your 60’ times or handle curves with confidence, everything we do is designed to get you out on the road.\u003cbr\u003e\u003cbr\u003e\n\nWhether your goal is a Saturday night sprint across the checkered flag or a slow, easy cruise down main street, we have the suspension and driveline products you need for the experience you want.\u003cbr\u003e\u003cbr\u003e\nOur #1 priority at QA1 is quality, which is why our quality system is certified to the ISO 9001 standard. QA1’s products are designed, built, and tested to ensure consistent quality, ultimate reliability, and unbeatable performance. We follow strict processes, use precision machinery, and inspect all of our products to ensure the quality meets our high standards.\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082055106818,"sku":"QAP52611-S750","price":2506.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/C10_20Front_20Control_20Arm_20Assembly_4.jpg?v=1784945403"},{"product_id":"qa1-99-06-chevrolet-silverado-1500-2wd-upper-control-arm-kit","title":"QA1 99-06 Chevrolet Silverado 1500 2WD Upper Control Arm Kit","description":"Product Overview Upgrade your NBS truck’s front suspension geometry and durability with QA1’s tubular upper control arm kit. Designed specifically for lowered or performance-built 2WD Silverado and Sierra 1500s, these arms help maintain proper alignment, improve ride quality, and add strength where it counts. BETTER GEOMETRY, STRONGER DESIGN Factory control arms weren’t made for today’s performance demands or lowered setups. QA1’s tubular design improves caster for better stability and helps maintain proper alignment throughout suspension travel. They're lighter than stock and compliment QA1 coilovers perfectly. STRAIGHTFORWARD, BOLT-ON INSTALL These control arms are a direct bolt-in replacement for OEM uppers and work with stock or QA1 drop spindles (Part Number: 9056-120). They come fully assembled with ball joints and bushings pre-installed. MADE IN THE USA QA1 NBS control arms are proudly made in Lakeville, Minnesota and built to last with a durable powder coat finish. Fitment Notes: Fits 1999–2006 Chevrolet Silverado \/ GMC Sierra 1500 2WD with coil front suspension: Not compatible with vehicles originally equipped with torsion bar front suspension\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2005\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eHybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2002-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eWT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2005\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eZ71 Off-Road\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2002-2005\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2001\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eC3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2002-2006\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eDenali\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2002\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eHT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005-2006\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eHybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2003,2006\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eSL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2006\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eSLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2006\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eSLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2002-2006\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eWT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082055205122,"sku":"QAP52626","price":549.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/20c81972e6e1ea6a9150022e8d8ff5daL.jpg?v=1764286514"},{"product_id":"qa1-99-06-chevy-silverado-1500-2wd-single-adjustable-front-suspension-kit","title":"QA1 99-06 Chevy Silverado 1500 2WD Single Adjustable Front Suspension Kit","description":"Product Overview Upgrade the front suspension of your NBS truck with QA1’s complete coil-over and control arm kit. Designed for 2WD 1999–2006 Silverado and Sierra 1500s, this system includes tubular upper and lower control arms and QA1’s single adjustable coil-overs DIAL IN THE PERFECT STANCE QA1’s front coil-overs give you 1\" to 3\" of ride height adjustability right out of the box. Want to go lower? Pair them with QA1’s 2\" drop spindles (Part Number: 9056-120) for a total drop range of 3\" to 5\" up front. Whether you're aiming for a subtle level or a slammed street look, this setup lets you get it just right. IMPROVED GEOMETRY WITH BOLT-ON CONTROL ARMS The included QA1 upper and lower tubular control arms are built to improve suspension geometry and increase strength over stock. They offer more clearance for coil-overs, reduce deflection under load, and help maintain proper alignment. RIDE QUALITY YOU CAN TUNE This kit features QA1’s single adjustable coil-overs, allowing you to set your preferred ride height and fine-tune damping with 18 clicks of combined compression and rebound adjustment. It’s easy to adjust on the vehicle and delivers a noticeable improvement in both comfort and control. STRAIGHTFORWARD, BOLT-ON INSTALL This system bolts directly into place using standard tools—no welding required. QA1 includes everything you need for a smooth install, with pre-installed ball joints and bushings in both control arms to save you time. MADE IN THE USA QA1 NBS suspension is proudly made in Lakeville, Minnesota and built to last with a durable powder coat finish. Fitment Notes: Fits 1999–2006 Chevrolet Silverado \/ GMC Sierra 1500 2WD with coil front suspension: Works exclusively with QA1 sway bar (Part Number: 52869) - does not fit with factory sway bar: Works with factory or QA1 drop spindles (Part Number: 9056-120): Not compatible with vehicles originally equipped with torsion bar front suspension\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2005\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eHybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2002-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eWT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2005\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eZ71 Off-Road\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2002-2005\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2001\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eC3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2002-2006\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eDenali\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2002\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eHT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005-2006\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eHybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2003,2006\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eSL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2006\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eSLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2006\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eSLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2002-2006\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eWT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082055270658,"sku":"QAP52626-S700","price":2399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/3ee0da70f0f0465748dc61bdf5af615fL.jpg?v=1764286515"},{"product_id":"qa1-99-06-chevrolet-silverado-1500-2wd-lower-control-arm-kit","title":"QA1 99-06 Chevrolet Silverado 1500 2WD Lower Control Arm Kit","description":"Product Overview Upgrade your NBS truck’s suspension with QA1’s tubular lower control arms—purpose-built for use with QA1 coil-over systems. These arms are a must-have for lowered or performance-driven 2WD Silverado and Sierra 1500s, offering improved geometry, added strength, and better clearance for coil-over setups. DESIGNED FOR COIL-OVER PERFORMANCE Unlike factory arms, QA1’s tubular lower control arms are engineered specifically for coil-over applications. They improve suspension geometry, reduce weight, and provide the clearance needed for QA1’s front coil-over shocks—giving your truck the stance, handling, and reliability you expect from a serious suspension upgrade. STRAIGHTFORWARD, BOLT-ON INSTALL These lower control arms are a direct bolt-in replacement and are designed to work with QA1 front coil-overs and drop spindles (Part Number: 9056-120). Each set comes fully assembled with ball joints and bushings installed, making installation easy and efficient. MADE IN THE USA QA1 NBS control arms are proudly made in Lakeville, Minnesota and built to last with a durable powder coat finish. Fitment Notes: Fits 1999–2006 Chevrolet Silverado and GMC Sierra 1500 2WD with coil font suspension: Coil-over only – not compatible with factory spring and shock setup: Works exclusively with QA1 sway bar part #52869 - does not fit with factory sway bar: Works with factory or QA1 drop spindles (Part Number: 9056-120): Not compatible with vehicles originally equipped with torsion bar front suspension\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2005\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eHybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2002-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eWT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2005\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eZ71 Off-Road\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2002-2005\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2001\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eC3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2002-2006\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eDenali\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2002\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eHT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005-2006\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eHybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2003,2006\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eSL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2006\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eSLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2006\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eSLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2002-2006\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eWT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082055368962,"sku":"QAP52627","price":949.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/f69f045c31a56d70611d4ff4efbe5946L.jpg?v=1764286516"},{"product_id":"qa1-67-69-gm-f-body-68-74-x-body-street-performance-upper-control-arm-kit-front","title":"QA1 Control Arm Kit, Upper, Street Gm 67-69 F-Body, 68-74 X-Body - 52717","description":"\u003cp\u003eQA1's GM 2.0 Control Arms provide increased positive caster compared to OE arms, are among the lightest arms available featuring lower unsprung weight and improved performance without sacrificing durability.  They include QA1's integrated ball joint design: stronger than OEM and rebuildable for tunability, providing long-term reliable service.  These arms feature billet cross shafts for reduced weight and durability for the long haul.  Double-sheer lower mounts are coil-over ready for a clean installation.  QA1 GM 2.0 Control Arms look incredible and use no unsightly additional adaptors!  Form meets function - these newly designed arms look and perform great and don't require painstaking restoring like factory stamped steel control arms.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eThese are perfect for GM enthusiasts looking for a simple first-step in upgrading an original suspension or replacing worn and outdated tubular control arms or those wanting to improve their overall handling, ride quality and vehicle stance.  The arms will improve suspension geometry over the factory configuration and pave the way for planning additional upgrades like QA1 Pro-Coils and full suspension kits.  (Arms are not compatible with OE springs.  Must be used with a coil-over system.)\u003c\/p\u003e\n\u003cp\u003eSold in pairs. Utilize OE-style sway bar links (not included). Includes bump stops on uppers and lowers, adjustable steering stops on lowers, and all required mounting hardware.\u003c\/p\u003e\n\u003cp\u003eHigh strength, low alloy steel enables optimized thinner wall construction and results in overall lighter weight.\u003c\/p\u003e\n\u003cp\u003eQA1's integrated low-maintenance ball joints feature integrated ball joint dust boots, are stronger than competing ball joints, give long-term service and are rebuildable.  QA1 GM 2.0 Control Arms will work with either OE or drop spindles.  Increased positive caster design improves straight line stability.\u003c\/p\u003e\n\u003cp\u003eGM 2.0 Street Series control arms feature stock length ball joint studs and polyurethane bushings for noise\/vibration\/harshness isolation.  Providing durability with low friction, they're stiff enough to provide superb handling without undesirable deflection.\u003c\/p\u003e\n\u003cp\u003eCompatible with all QA1 single adjustable, double adjustable, and MOD Series Pro Coil-Over style shocks.\u003c\/p\u003e\n\u003cp\u003eBest-in-class strength in QA1's ball joint housing design in one of the lightest arms available for GM Street, Pro Touring, and Race vehicles.\u003c\/p\u003e\n\u003cp\u003eLighter than factory and most aftermarket versions: Uppers are less than 7 lbs. per arm, lowers are less than 9-3\/4 lbs. per arm.\u003c\/p\u003e\n\u003cp\u003eMounts in OE location with no cutting, fabricating, or welding required.\u003c\/p\u003e\n\u003cp\u003eAccommodates either factory or aftermarket disc brakes\u003c\/p\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082055532802,"sku":"QAP52717","price":635.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/52717.jpg?v=1784945405"},{"product_id":"qa1-70-81-gm-f-body-73-77-a-body-75-79-x-body-78-96-b-body-street-perf-upper-control-arm-kit-front","title":"QA1 Upper, Street Perf, 70-81 F-Body, 73-77 A-Body, 75-79 X-Body, 78-96 B-Body (1970-1996 Chevrolet, Pontiac, Buick, GMC, Oldsmobile Fitment) - 52718","description":"QA1 Upper, Street Perf, 70-81 F-Body, 73-77 A-Body, 75-79 X-Body, 78-96 B-Body (1970-1996 Chevrolet, Pontiac, Buick, GMC, Oldsmobile Fitment) - 52718\u003cbr\u003e\u003cbr\u003eQA1?s Street Control Arms are the perfect upgrade for any vehicle used primarily for cruising and long distances. Configured for QA1 Pro Coil Systems with double shear lower mounting. The combination of high strength tubing and billet aluminum cross shafts make these arms amount to the lightest on the market with improved strength and durability. Robotically welded and high-quality powder coated these street control arms look great. These control arms use polyurethane bushings which will isolate road noise for smoother ride, yet stiff enough for great handling. The high-quality integrated ball joint included with this control arm setup is stronger than the factory ball joint and provides a long-term service. All of these arms are designed to add 3-4 degrees of caster and 0.5 to 1 degree of negative camber when used together. When used independently they will add approximately half of the preceding numbers.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082055598338,"sku":"QAP52718","price":635.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/52718_1.jpg?v=1784945402"},{"product_id":"qa1-67-69-gm-f-body-68-74-x-body-street-performance-lower-control-arm-kit-front","title":"QA1 2.0 Street Control Arms (1967-1969 GM F-Body \/ 1968-1974 GM X-Body) - 52719","description":"\u003cp\u003eQA1 GM 2.0 Street control arms provide increased positive caster compared to OE arms and are among the lightest available. These arms feature a lower unsprung weight and improved performance without sacrificing durability. Each arm includes a QA1 integrated ball joint design which is stronger than OEM and rebuildable for tunability, providing long-term reliable service. These arms are designed with billet cross shafts for reduced weight and durability for the long haul. Double-sheer lower mounts are coil-over ready for a clean installation. QA1 GM 2.0 Street control arms look incredible and use no unsightly additional adaptors! Form meets function with these newly designed arms that look and perform great without requiring painstaking restoring like factory stamped steel control arms.\u003c\/p\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082055696642,"sku":"QAP52719","price":854.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/52719_1.jpg?v=1784945402"},{"product_id":"qa1-70-81-gm-f-body-73-77-a-body-75-79-x-body-78-96-b-body-street-perf-lower-control-arm-kit-front","title":"QA1 Lower, Street Perf, 70-81 F-Body, 73-77 A-Body, 75-79 X-Body, 78-96 B-Body (1970-1996 Pontiac, Buick, Chevrolet, GMC, Oldsmobile Fitment) - 52720","description":"QA1 Lower, Street Perf, 70-81 F-Body, 73-77 A-Body, 75-79 X-Body, 78-96 B-Body (1970-1996 Pontiac, Buick, Chevrolet, GMC, Oldsmobile Fitment) - 52720\u003cbr\u003e\u003cbr\u003eQA1?s Street Control Arms are the perfect upgrade for any vehicle used primarily for cruising and long distances. Configured for QA1 Pro Coil Systems with double shear lower mounting. The combination of high strength tubing and billet aluminum cross shafts make these arms amount to the lightest on the market with improved strength and durability. Robotically welded and high-quality powder coated these street control arms look great. These control arms use polyurethane bushings which will isolate road noise for smoother ride, yet stiff enough for great handling. The high-quality integrated ball joint included with this control arm setup is stronger than the factory ball joint and provides a long-term service. All of these arms are designed to add 3-4 degrees of caster and 0.5 to 1 degree of negative camber when used together. When used independently they will add approximately half of the preceding numbers.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082055762178,"sku":"QAP52720","price":854.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/52720_1.jpg?v=1784945405"},{"product_id":"qa1-71-76-gm-b-body-control-arm-kit-lower-street-perform","title":"QA1 Control Arm Kit, Lower, Street Performance, 71-76 Gm B-Body (1971-1976 Impala, Caprice) - 52721","description":"QA1 Control Arm Kit, Lower, Street Performance, 71-76 Gm B-Body (1971-1976 Impala, Caprice) - 52721\u003cbr\u003e\u003cbr\u003eBig Wheel Street Performance Lower Control Arm Kit, 71-96 GM B-Body\u003cbr\u003e\u003cbr\u003eStreet Performance Lower Control Arms, 71-76 GM B-Body, Front\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082055860482,"sku":"QAP52721","price":854.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/71-76_20GM_20B-Body_20Lower_20Control_20Arm_Big_20Wheel.jpg?v=1784945404"},{"product_id":"qa1-64-72-gm-a-g-body-street-performance-upper-control-arm-kit-front","title":"QA1 Street Performance 2.0 Upper Control Arms (1964-1972 GM A-Body) - 52722","description":"\u003cdiv\u003e\n\u003cdiv\u003eImproves a vehicle suspension geometry to increase overall handling, ride quality, and vehicle stance\u003c\/div\u003e\n\u003cdiv\u003ePolyurethane bushings for low noise, vibration, and harness while being stiff to resist deflection for superb handling\u003c\/div\u003e\n\u003cdiv\u003eIncreased positive caster for straight-line stability\u003c\/div\u003e\n\u003cdiv\u003eManufactured using high-strength low alloy steel, billet aluminum cross shafts, and an exclusive ball joint housing design that provides one of the lightest designs available at less than 7 lbs. each. The lighter weight will lower a vehicle's unsprung weight improving performance.\u003c\/div\u003e\n\u003cdiv\u003eUtilizes QA1 Ultimate ball joints that feature low-maintenance, strengthened construction, rebuildable design, and an integrated dust boot for long-term service.\u003c\/div\u003e\n\u003cdiv\u003eMounts in the stock location requiring no modifications\u003c\/div\u003e\n\u003cdiv\u003eCompatible with stock spindles or drop spindles\u003c\/div\u003e\n\u003cdiv\u003eCompatible with QA1 single adjustable, double adjustable, and MOD Series Pro coil-over shocks\u003c\/div\u003e\n\u003cdiv\u003eCompatible with factory or aftermarket disc brake systems\u003c\/div\u003e\n\u003c\/div\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082055926018,"sku":"QAP52722","price":635.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/52722.jpg?v=1784945407"},{"product_id":"qa1-64-72-gm-a-g-body-street-performance-lower-control-arm-kit-front","title":"QA1 Street Performance 2.0 Lower Control Arms (1964-1972 GM A-Body) - 52737","description":"\u003cdiv\u003eImproves a vehicle suspension geometry to increase overall handling, ride quality, and vehicle stance\u003c\/div\u003e\n\u003cdiv\u003ePolyurethane bushings for low noise, vibration, and harness while being stiff to resist deflection for superb handling\u003c\/div\u003e\n\u003cdiv\u003eIncreased positive caster for straight-line stability\u003c\/div\u003e\n\u003cdiv\u003eManufactured using high-strength low alloy steel and an exclusive ball joint housing design that provides one of the lightest designs available at less than 10 lbs. each. The lighter weight will lower a vehicle's unsprung weight improving performance.\u003c\/div\u003e\n\u003cdiv\u003eUtilizes QA1 Ultimate ball joints that feature low-maintenance, strengthened construction, rebuildable design, and an integrated dust boot for long-term service.\u003c\/div\u003e\n\u003cdiv\u003eLower arms include adjustable steering stops and bump stops\u003c\/div\u003e\n\u003cdiv\u003eUtilizes stock style sway bar links (not included)\u003c\/div\u003e\n\u003cdiv\u003eMounts in the stock location requiring no modifications\u003c\/div\u003e\n\u003cdiv\u003eCompatible with stock spindles or drop spindles\u003c\/div\u003e\n\u003cdiv\u003eDouble-sheer lower mounts are coil-over ready and are compatible with QA1 single adjustable, double adjustable, and MOD Series Pro coil-over shocks\u003c\/div\u003e\n\u003cdiv\u003eCompatible with factory or aftermarket disc brake systems\u003c\/div\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082055991554,"sku":"QAP52737","price":854.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/52737.jpg?v=1784945406"},{"product_id":"qa1-82-04-chevrolet-s-10-street-performance-lower-control-arm-kit-front","title":"QA1 Control Arm Kit, Lower, Street Performance, 82-04 S-10 (1982-2004 S10, Sonoma) - 52766","description":"QA1 Control Arm Kit, Lower, Street Performance, 82-04 S-10 (1982-2004 S10, Sonoma) - 52766\u003cbr\u003e\u003cbr\u003eQA1?s Street Control Arms are the perfect upgrade for any vehicle used primarily for cruising and long distances. Configured for QA1 Pro Coil Systems with double shear lower mounting. The combination of high strength tubing and billet aluminum cross shafts make these arms amount to the lightest on the market with improved strength and durability. Robotically welded and high-quality powder coated these street control arms look great. These control arms use polyurethane bushings which will isolate road noise for smoother ride, yet stiff enough for great handling. The high-quality integrated ball joint included with this control arm setup is stronger than the factory ball joint and provides a long-term service. All of these arms are designed to add 3-4 degrees of caster and 0.5 to 1 degree of negative camber when used together. When used independently they will add approximately half of the preceding numbers.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082056089858,"sku":"QAP52766","price":854.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/52764_2.jpg?v=1784945407"},{"product_id":"qa1-82-04-chevrolet-s-10-street-performance-upper-control-arm-kit-front","title":"QA1 Control Arm Kit, Upper, Street Performance, 82-04 S-10 (1982-2004 S10, Sonoma) - 52767","description":"QA1 Control Arm Kit, Upper, Street Performance, 82-04 S-10 (1982-2004 S10, Sonoma) - 52767\u003cbr\u003e\u003cbr\u003eQA1?s Street Control Arms are the perfect upgrade for any vehicle used primarily for cruising and long distances. Configured for QA1 Pro Coil Systems with double shear lower mounting. The combination of high strength tubing and billet aluminum cross shafts make these arms amount to the lightest on the market with improved strength and durability. Robotically welded and high-quality powder coated these street control arms look great. These control arms use polyurethane bushings which will isolate road noise for smoother ride, yet stiff enough for great handling. The high-quality integrated ball joint included with this control arm setup is stronger than the factory ball joint and provides a long-term service. All of these arms are designed to add 3-4 degrees of caster and 0.5 to 1 degree of negative camber when used together. When used independently they will add approximately half of the preceding numbers.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082056155394,"sku":"QAP52767","price":635.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/52765_2.jpg?v=1784945408"},{"product_id":"qa1-67-69-gm-f-body-68-74-x-body-front-sway-bar-1-1-4in","title":"QA1 Sway Bar Kit, Front 1-1\/4\" Gm 67-69 F-Body, 68-74 X-Body - 52816","description":"QA1 Sway Bar Kit, Front 1-1\/4\" Gm 67-69 F-Body, 68-74 X-Body - 52816\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of QA1 products!\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eFrom bolt-on products that get you behind the wheel faster, to experienced technicians available to help increase your 60’ times or handle curves with confidence, everything we do is designed to get you out on the road.\u003cbr\u003e\u003cbr\u003e\n\nWhether your goal is a Saturday night sprint across the checkered flag or a slow, easy cruise down main street, we have the suspension and driveline products you need for the experience you want.\u003cbr\u003e\u003cbr\u003e\nOur #1 priority at QA1 is quality, which is why our quality system is certified to the ISO 9001 standard. QA1’s products are designed, built, and tested to ensure consistent quality, ultimate reliability, and unbeatable performance. We follow strict processes, use precision machinery, and inspect all of our products to ensure the quality meets our high standards.\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082056253698,"sku":"QAP52816","price":348.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/Sway_Bar_GM_F-Body_67-69_Front_52816.jpg?v=1784945408"},{"product_id":"qa1-67-69-gm-f-body-4-link-sway-bar-kit-rear-7-8in","title":"QA1 Qa1  Rear Sway Bar 67-69 Gm F Body (1967-1969 Camaro, Firebird) - 52827","description":"QA1 Qa1  Rear Sway Bar 67-69 Gm F Body (1967-1969 Camaro, Firebird) - 52827\u003cbr\u003e\u003cbr\u003eProduct Overview  Further improve your 67-69 F-body cornering capabilities and reduce body roll during hard launches by adding a rear sway bar to your QA1 4-link rear suspension system.   ONLY fits QA1 F-body rear 4-Link kits. Will NOT work with OEM rear suspension.   Improved Handling  QA1's 7\/8\" diameter sway bars are designed for your 1967-1969 Camaro to reduce body roll in the corners and improve handling  without sacrificing ride quality. QA1's carefully designed this sway bar to maximize ground clearance while hugging the rear axle and suspension for a clean look.   Easy Installation  QA1 sway bars come ready to install with end links and hardware  so you can bolt on confidence and leave body roll in the dust.  Powder Coated Finish QA1 sway bars have a black powder coated finish for great long-lasting looks.   Made in the USA QA1 suspension is proudly made in Lakeville  Minnesota.   Fitment Notes Will not fit leaf spring rear suspension  Designed to work with QA1 F-body 4-link suspension\u003cbr\u003e\u003cbr\u003eReduce body roll \u0026amp;amp\u003cbr\u003e improve handling\u003cbr\u003e Easy installation\u003cbr\u003e Durable black powder coat finish\u003cbr\u003e Made in the USA\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks\u003cbr\u003e suspension components\u003cbr\u003e carbon fiber driveshafts\u003cbr\u003e rod ends\u003cbr\u003e ball joints and more to a variety of automotive markets\u003cbr\u003e including circle track racing\u003cbr\u003e drag racing\u003cbr\u003e street performance\u003cbr\u003e and street rodding. With over 83\u003cbr\u003e000 square feet of manufacturing space in Lakeville\u003cbr\u003e MN\u003cbr\u003e QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan\u003cbr\u003e QA1 introduced rod ends and spherical bearings specifically for the performance racing industry\u003cbr\u003e quickly becoming the #1 name in rod ends\u003cbr\u003e spherical bearings\u003cbr\u003e custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology\u003cbr\u003e QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts\u003cbr\u003e QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082056319234,"sku":"QAP52827","price":348.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/67-69-Camaro-Rear_Sway_Bar.jpg?v=1784945407"},{"product_id":"qa1-62-72-b-body-70-74-e-body-sway-bar-kit-front-1-1-8in","title":"QA1 Sway Bar Kit, Front 1-1\/8\" (1962-1974 Dodge, Plymouth Fitment) - 52834","description":"QA1 Sway Bar Kit, Front 1-1\/8\" (1962-1974 Dodge, Plymouth Fitment) - 52834\u003cbr\u003e\u003cbr\u003eQA1 sway bars complete the suspension upgrade for the front of 62-76 A-body, 62-74 B-body and 70-74 E-body Mopars. For use with QA1's K-members, control arms, and rear 4-link, these sway bars are made using 1 \/\/ hollow 4130 chromoly steel with a 3\/16'' wall and are designed to improve performance and handling. These directly bolt on to QA1's K-members and lower control arms and are not designed to work with factory K-member or rear factory leaf springs.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082056417538,"sku":"QAP52834","price":262.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/52834_1.jpg?v=1784945406"},{"product_id":"qa1-68-72-gm-a-body-adjustable-rear-frame-support","title":"QA1 Frame Brace, Adjustable 68-72 Gm A-Body (1968-1972 Buick, Chevrolet, GMC, Oldsmobile, Pontiac Fitment) - 5284","description":"QA1 Frame Brace, Adjustable 68-72 Gm A-Body (1968-1972 Buick, Chevrolet, GMC, Oldsmobile, Pontiac Fitment) - 5284\u003cbr\u003e\u003cbr\u003eQA1 Adjustable Rear Frame Supports are engineered to improve handling, traction and all around suspension performance by eliminating unwanted chassis flex and reinforcing the upper and lower trailing arm mounts. Made from 1'' diameter cold rolled steel tubing, they feature zinc plated adjustable threaded sleeves for adjusting the preload in the rear trailing arm mount after installation. Designed to clear stock and aftermarket mufflers and includes all of the necessary hardware for an easy installation.\u003cbr\u003e\u003cbr\u003eAdjustable rear frame support for 68-72 GM A-bodies. Includes hardware.\u003cbr\u003e\u003cbr\u003eQA1 specializes in providing performance shocks, suspension components, carbon fiber driveshafts, rod ends, ball joints and more to a variety of automotive markets, including circle track racing, drag racing, street performance, and street rodding. With over 83,000 square feet of manufacturing space in Lakeville, MN, QA1 is proud to offer an extensive line of American-made suspension and driveline. Founded in 1993 by Jim Jordan, QA1 introduced rod ends and spherical bearings specifically for the performance racing industry, quickly becoming the #1 name in rod ends, spherical bearings, custom linkages and similar products to the motorsports industry. Always on the cutting edge of technology, QA1 recently introduced  in-house filament winding of carbon fiber and similar materials to provide driveshafts and other products. With continued focus on fine-tuning and expanding its offering of American-made high performance suspension components and carbon fiber driveshafts, QA1 has grown to be a household name in the performance aftermarket.\u003cbr\u003e\u003cbr\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":47082056483074,"sku":"QAP5284","price":289.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/Frame_Support_Rear_5283_2.jpg?v=1784945410"}],"url":"https:\/\/www.lethalperformance.com\/collections\/qa1.oembed","provider":"Lethal Performance","version":"1.0","type":"link"}