{"title":"K-Members","description":"\u003ch1\u003ek-members\u003c\/h1\u003e","products":[{"product_id":"upr-products-96-04-mustang-tubular-chrome-moly-k-member-kit","title":"UPR Products 96-04 Mustang Tubular Chrome Moly K Member Kit","description":"\u003cp\u003e* 4130 Seamless Chrome Moly Tubing\u003cbr\u003e\n* Tig Welded in Billet Fixture\u003cbr\u003e\n* Silver Powder Coated Finish\u003cbr\u003e\n* Lighter and Stronger than Mild Steel\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan\u003eQuality Construction:\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\nUPR's all new Chrome Moly K-member - will save more weight and exceed any strength limitations of mild steel while allowing maximum header and oil pan clearance, this kit was designed for the abuse of hardcore drag race, road race, and Street Enthusiasts most importantly it will handle the everyday wear and tear of city \u0026amp; highway streets like that was it's main intent.\u003cbr\u003e\n\u003cbr\u003e\nUPR Coil Over Kit with exclusive designed adjuster nut with new set screw to ensure it never looses it's setting! Also requires no tools to adjust ride height and features Eibach Springs.\u003cbr\u003e\n\u003cbr\u003e\nUPR Recommends the purchase of a bump steer kit with this product. Caster Camber plates are required for this product to fit correctly.\u003cbr\u003e\n\u003cbr\u003e\nNo one else gives you the bold clean styling of our Aftermarket Dress Ups, Suspension and Performance Parts for your American Muscle Car like UPR Products!\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan\u003eIncludes:\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n1-100% Chrome Moly Tubular K-member Silver Powder Coated\u003cbr\u003e\n2-100% Chrome Moly Tubular A-arms Silver Powder Coated\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan\u003eFits these vehicles:\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n1996 1997 1998 1999 2000 2001 2002 2003 2004 LX GT GTS Mustang Cobra Shelby Roush Saleen \u0026amp; Steeda Vehicles.\u003cbr\u003e\n\u003cbr\u003e\nIf using after market motor mounts the locating tab may have to be trimmed. Must re-use factory hardware.\u003cbr\u003e\n\u003cbr\u003e\nMADE IN THE USA!\u003c\/p\u003e","brand":"UPR","offers":[{"title":"Default Title","offer_id":48021533753602,"sku":"UPR-2005-96K-100","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/2005-96k-101.jpg?v=1785025081"},{"product_id":"upr-products-96-04-mustang-tubular-chrome-moly-k-member-w-spring-perches","title":"UPR Products 96-04 Mustang Tubular Chrome Moly K Member w\/ Spring Perches","description":"\u003cp\u003e* Bolt On Spring Perches for use with Factory A-Arms\u003cbr\u003e * 4130 Seamless Chrome Moly Tubing\u003cbr\u003e * Tig Welded in Billet Fixture\u003cbr\u003e * Silver Powder Coated Finish\u003cbr\u003e * Lighter and Stronger than Mild Steel\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eQuality Construction:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eUPR's  all new Chrome Moly K-member  - will save more weight and exceed any  strength limitations of mild steel while allowing maximum header and oil  pan clearance, This kit was designed for the abuse of hardcore drag race, road race,  and Street Enthusiasts most importantly it will handle the everyday wear  and tear of city \u0026amp; highway streets like that was it's main intent.  Includes bolt on spring perches for use with factory A arms and springs.\u003cbr\u003e\u003cbr\u003eUPR  Recommends the purchase of a bumpsteer kit with this product. Caster  Camber plates are required for this product to fit correctly.\u003cbr\u003e\u003cbr\u003eNo  one else gives you the bold clean styling of our Aftermarket Dress Ups,  Suspension and Performance Parts for your American Muscle Car like UPR  Products!\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFits these vehicles:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e1996 1997 1998 1999 2000 2001 2002 2003 2004 LX GT GTS Mustang Cobra Shelby Roush Saleen \u0026amp; Steeda Vehicles.\u003cbr\u003e\u003cbr\u003eIf using after market motor mounts the locating tab may have to be trimmed.  Must re-use factory hardware.\u003cbr\u003e\u003cbr\u003eWill also bolt into a 79-95 Ford Mustang for use with a Modular 4.6 or 5.4 based engine.\u003cbr\u003e\u003cbr\u003eMADE IN THE USA\u003c\/p\u003e","brand":"UPR","offers":[{"title":"Default Title","offer_id":48021533851906,"sku":"UPR-2005-96-SP","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/2005-96-sp.jpg?v=1785025080"},{"product_id":"upr-chrome-moly-tubular-k-member-2005-2010-mustang-2005-05","title":"UPR Chrome Moly Tubular K-Member (2005-2010 Mustang) - 2005-05","description":"\u003cdiv\u003eUPR's all new 2005-2014 Mustang Chrome Moly K-member - will save more weight and exceed any strength limitations of mild steel while allowing maximum header and oil pan clearance. This kit was designed for the abuse of hardcore drag race, road race, and Street Enthusiasts most importantly it will handle the everyday wear and tear of city \u0026amp; highway streets like that was it's main intent. Featuring built in engine mounts that can be set to stock engine height or 1\/2\" lowered for additional hood clearance. Great for aftermarket intakes or superchargers. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe factory K-member weighs in at 46lbs our Chrome Moly K-member only weighs 24lbs saving 22lbs off the nose of your car where it's needed most. Works with factory A arms and with factory electronic steering rack on 11-14 Mustangs.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eMade with 4130 seamless Chrome Moly tubing sourced in the USA for maximum weight savings and strength\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eInstalls in 3-5 hours. \u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e» Hardware Included\u003c\/div\u003e\n\u003cdiv\u003e» Integrated Adjustable Engine Mount \u003c\/div\u003e\n\u003cdiv\u003e» Silver Powder Coated Finish\u003c\/div\u003e\n\u003cdiv\u003e» Tig Welded in Billet Fixtures\u003c\/div\u003e\n\u003cdiv\u003e» Engine will sit at stock height\u003c\/div\u003e\n\u003cdiv\u003e» 4130 Seamless Chrome Moly Tubing\u003c\/div\u003e\n\u003cdiv\u003e» Lighter and Stronger than Mild Steel\u003c\/div\u003e\n\u003cdiv\u003e» Saves 22lbs over the factory K-member\u003c\/div\u003e\n\u003cdiv\u003e» All Welding \u0026amp; Materials Made in the USA!\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eFits These Vehicles:\u003c\/div\u003e\n\u003cdiv\u003e2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Mustang GT GT500 Boss 302, Bullitt S197 4.6 5.0 Coyote\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eMade in the USA!\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"UPR","offers":[{"title":"Default Title","offer_id":48102200803586,"sku":"UPR-2005-05","price":749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/2005-05-i2.jpg?v=1785025072"},{"product_id":"maximum-motorsports-96-04-mustang-k-member-hellion-turbo","title":"Maximum Motorsports 96-04 Mustang K-Member (Hellion Turbo) - MMKM-3","description":"\u003cp\u003e\u003cstrong\u003eMaximum Motorsports 96-04 Mustang K-Member (Hellion Turbo)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eQualities that make the MM Mustang K-Member unique:\u003c\/p\u003e\u003cul\u003e    \u003cli\u003eLengthens the Mustang's wheelbase by 3\/4\". This improves the front to rear weight distribution. It also increases the positive caster, which improves cornering ability.\u003c\/li\u003e    \u003cli\u003eThe vertical location of the control arm pivots was optimized to improve the camber curve on lowered vehicles, and improve the roll center height.\u003c\/li\u003e    \u003cli\u003eTwo possible vertical locations for the control arm pivots (1\" higher, or 2\" higher than stock) are built into the MM K-member. This allows installing the front control arms in the pivot location that is optimal for the car's chosen ride height.\u003c\/li\u003e    \u003cli\u003eThe steering rack location is optimized for the greatest improvement in Ackerman steering geometry possible. This improves turn-in response, reduces understeer, and improves tire wear.\u003c\/li\u003e    \u003cli\u003eAfter extensive testing of different anti-dive geometries, Maximum Motorsports determined that Ford got it right! The stock amount of anti-dive provides the best performance, and that is what we build into our MM K-member. Increasing anti-dive geometry over the stock amount will cause the suspension to bind during hard braking, which in turn causes the front brakes to lock-up easily.\u003c\/li\u003e    \u003cli\u003eThe MM K-Member comes standard with a two point MM K-member Brace. Stock K-members need them, and so do aftermarket K-members. This is the only tubular Mustang K-member that has a 2-point brace as an integral part of the design.\u003c\/li\u003e    \u003cli\u003eOur 5.0L Mustang MM K-member allows the option of setting the engine back one inch, or installing it in the stock location.\u003c\/li\u003e    \u003cli\u003eWe offer versions of our MM K-member that allow 5.0-based engines to be installed in 1996-2004 Mustangs, and modular engines to be installed in 1979-1995 Mustangs.\u003c\/li\u003e    \u003cli\u003eIncreased clearance for the oil pan makes its removal much easier.\u003c\/li\u003e    \u003cli\u003eMustang Header clearance is increased in critical areas.\u003c\/li\u003e    \u003cli\u003eOur tubular design provides easier access to the Mustang's starter motor.\u003c\/li\u003e    \u003cli\u003ePrecision holes are pre-drilled for plumb bobs, to make it easy to accurately square the MM K-member to the Mustang chassis during installation.\u003c\/li\u003e    \u003cli\u003eFactory Ford K-Members weigh an average of 50 lb. The MM K-member weighs only 36lb, for a 28% weight savings.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maximum Motorsports","offers":[{"title":"Default Title","offer_id":48141297058050,"sku":"MM-MMKM-3","price":897.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/mmkm-3.jpg?v=1784983347"},{"product_id":"maximum-motorsports-96-04-mustang-k-member-5-0l-engine","title":"Maximum Motorsports 96-04 Mustang K-Member (5.0L Engine) - MMKM-1.1","description":"\u003cp\u003e\u003cstrong\u003eMaximum Motorsports 96-04 Mustang K-Member (5.0L Engine)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eQualities that make the MM Mustang K-Member unique:\u003c\/p\u003e\u003cul\u003e    \u003cli\u003eLengthens the Mustang's wheelbase by 3\/4\". This improves the front to rear weight distribution. It also increases the positive caster, which improves cornering ability.\u003c\/li\u003e    \u003cli\u003eThe vertical location of the control arm pivots was optimized to improve the camber curve on lowered vehicles, and improve the roll center height.\u003c\/li\u003e    \u003cli\u003eTwo possible vertical locations for the control arm pivots (1\" higher, or 2\" higher than stock) are built into the MM K-member. This allows installing the front control arms in the pivot location that is optimal for the car's chosen ride height.\u003c\/li\u003e    \u003cli\u003eThe steering rack location is optimized for the greatest improvement in Ackerman steering geometry possible. This improves turn-in response, reduces understeer, and improves tire wear.\u003c\/li\u003e    \u003cli\u003eAfter extensive testing of different anti-dive geometries, Maximum Motorsports determined that Ford got it right! The stock amount of anti-dive provides the best performance, and that is what we build into our MM K-member. Increasing anti-dive geometry over the stock amount will cause the suspension to bind during hard braking, which in turn causes the front brakes to lock-up easily.\u003c\/li\u003e    \u003cli\u003eThe MM K-Member comes standard with a two point MM K-member Brace. Stock K-members need them, and so do aftermarket K-members. This is the only tubular Mustang K-member that has a 2-point brace as an integral part of the design.\u003c\/li\u003e    \u003cli\u003eOur 5.0L Mustang MM K-member allows the option of setting the engine back one inch, or installing it in the stock location.\u003c\/li\u003e    \u003cli\u003eWe offer versions of our MM K-member that allow 5.0-based engines to be installed in 1996-2004 Mustangs, and modular engines to be installed in 1979-1995 Mustangs.\u003c\/li\u003e    \u003cli\u003eIncreased clearance for the oil pan makes its removal much easier.\u003c\/li\u003e    \u003cli\u003eMustang Header clearance is increased in critical areas.\u003c\/li\u003e    \u003cli\u003eOur tubular design provides easier access to the Mustang's starter motor.\u003c\/li\u003e    \u003cli\u003ePrecision holes are pre-drilled for plumb bobs, to make it easy to accurately square the MM K-member to the Mustang chassis during installation.\u003c\/li\u003e    \u003cli\u003eFactory Ford K-Members weigh an average of 50 lb. The MM K-member weighs only 36lb, for a 28% weight savings.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maximum Motorsports","offers":[{"title":"Default Title","offer_id":48141297189122,"sku":"MM-MMKM-1.1","price":897.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/mmkm-11.jpg?v=1784983346"},{"product_id":"maximum-motorsports-96-04-mustang-4-point-k-member-brace","title":"Maximum Motorsports 96-04 Mustang 4-Point K Member Brace - MMKB4-4","description":"\u003cstrong\u003eMaximum Motorsports 96-04 Mustang 4-Point K Member Brace\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e    * The front of the MM brace mounts to the bottom of the K-member. The rearward points of the brace mount at the K-Member-to-chassis mounting points.\u003cbr\u003e    * The MM K-Member Brace's design includes a structural steel web. This splits the suspension loads. Part of the load goes into the unibody at the rearward K-member to chassis mounting points, and part goes straight across the K-member to the opposite side.\u003cbr\u003e    * The mounting bolts for the brace attach through a structural tube. Unlike commonly used flat tabs, the suspension loads pass into the MM brace without deflecting the mounts.\u003cbr\u003e    * Note: 4-Point braces will not clear long-tube headers. MMKB2-2 will clear most long-tube headers.\u003cbr\u003e\u003cbr\u003e","brand":"Maximum Motorsports","offers":[{"title":"Default Title","offer_id":48141297320194,"sku":"MM-MMKB4-4","price":134.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/mmkb4-4_lg.jpg?v=1784983347"},{"product_id":"maximum-motorsports-1-4-k-member-spacers","title":"Maximum Motorsports 1\/4\u0026quot; K-Member Spacers - MMKM-20","description":"\u003cp\u003e\u003cstrong\u003eMaximum Motorsports 1\/4\" K-Member Spacers\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eInstalling \u003cb\u003espacers\u003c\/b\u003e between the k-member and the chassis creates more \u003cb\u003eclearance\u003c\/b\u003e between the top of the engine and the underside of the hood. The increased clearance to the hood aids with some \u003cb\u003eengine swaps\u003c\/b\u003e.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e    \u003cli\u003eWhen installed on a Mustang that also has a \u003cb\u003efront coil-over kit\u003c\/b\u003e these spacers have \u003cb\u003eno effect\u003c\/b\u003e on ride height. The spacers move the k-member downwards from the chassis, towards the ground.\u003c\/li\u003e    \u003cli\u003eWhen installed with a \u003cb\u003estock k-member\u003c\/b\u003e, and with the springs still in the stock location, the \u003cb\u003eride height will change\u003c\/b\u003e. The chassis will move upwards by the thickness of the spacers, and the k-member will remain the same distance from the ground.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003ci\u003e5.0 Mustang and Super Fords\u003c\/i\u003e magazine used MM k-member spacers on their \u003cb\u003eFox 500\u003c\/b\u003e project car. With the MM spacers, the \u003cb\u003eShelby GT 500 supercharged 5.4L\u003c\/b\u003e engine was lowered enough in their Fox Mustang that the hood modifications needed to clear the intake were much less radical than would otherwise have been required. \u003cbr\u003e\u003cbr\u003eThis 1\/4\" spacer kit includes four aluminum spacer plates to fit between the k-member and the chassis. Longer bolts are included as appropriate. Reuses OEM nuts and nut-plates, and some of the OEM attachment bolts. Spacers are also available in 1\/2\" thickness.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cb\u003eFits 1979-2004\u003c\/b\u003e Mustangs with \u003cb\u003eany k-member\u003c\/b\u003e, stock or aftermarket. \u003cbr\u003e\u003cbr\u003eSome \u003cb\u003econsiderations\u003c\/b\u003e when installing spacers between the k-member and the chassis:\u003c\/p\u003e\u003cul\u003e    \u003cli\u003eGround clearance may be reduced.\u003c\/li\u003e    \u003cli\u003eThe position of caster\/camber plate strut shaft spacers may need changing to maintain the strut's proper compression travel and droop travel.\u003c\/li\u003e    \u003cli\u003eTransmission mount may need modification to maintain proper driveline angles.\u003c\/li\u003e    \u003cli\u003ePinion angle may need to be adjusted to maintain proper driveline angles.\u003c\/li\u003e    \u003cli\u003eSteering shaft will need to be extended slightly (easily accommodated by an Maximum Motorsports telescoping steering shaft)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e    \u003cli\u003eFront suspension geometry may be altered, with possible consequences to the car's handling.\u003c\/li\u003e    \u003cli\u003eA front-end alignment will be necessary.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maximum Motorsports","offers":[{"title":"Default Title","offer_id":48141299581186,"sku":"MM-MMKM-20","price":109.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/mmkm-20.jpg?v=1784983360"},{"product_id":"upr-79-04-mustang-3-8-k-member-spacer-kit","title":"UPR 79-04 Mustang 3\/8\" K-Member Spacer Kit","description":"\u003cp\u003e\u003cstrong\u003eUPR 79-04 Mustang 3\/8\" K-Member Spacer Kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e* UPR K-member 3\/8\" Spacer Kit\u003cbr\u003e* Laser Cut Spacer Plates\u003cbr\u003e* Properly Space K-member down 3\/8\"\u003cbr\u003e* Includes Grade 10.9 K-member mounting hardware\u003cbr\u003e* Increases hood clearance for bigger intakes or superchargers\u003cbr\u003e* Spacer plates are unfinished and hardware is all zinc plated\u003cbr\u003e\u003cbr\u003e\u003cfont color=\"#ff0000\"\u003eInnovative Bold Styling:\u003c\/font\u003e\u003cbr\u003e\u003cbr\u003eLooking for a  way to keep from having to replace or cut your stock hood but need the  extra clearance then look no further than UPR Products 3\/8\" K-member  Spacer Kit. Designed for use with the UPR Tubular K-member but will also  work with other K-members as well. This kit includes 8 laser cut plates  to match the foot print of the UPR K-member. Also includes all Grade  10.9 hardware that is longer than stock so it can accommodate the  thicker plates.\u003cbr\u003e\u003cbr\u003eOur Quality \u0026amp; Finish will leave you with a  grin from ear to ear as it is the Best looking unit available for your  Mustang or Cobra.\u003cbr\u003e\u003cbr\u003e\u003cfont color=\"#ff0000\"\u003eQuality Construction:\u003c\/font\u003e\u003cbr\u003e\u003cbr\u003eNo  one else can Stack up to the bold clean styling of our aftermarket  Billet \/ Stainless Steel Dress Ups, Street \/ Strip \/ Racing Suspension  and Performance Parts for your American Muscle Car!\u003cbr\u003e\u003cbr\u003e\u003cfont color=\"#ff0000\"\u003eFits these Vehicles:\u003c\/font\u003e\u003cbr\u003e\u003cbr\u003e1979 1980 1981 1982  1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996  1997 1998 1999 2000 2001 2002 2003 2004 Ford Mustang GT Mach 1 Bullitt  Cobra Saleen Steeda and Roush Vehicles.\u003cbr\u003e\u003cbr\u003eMade in the USA!\u003c\/p\u003e","brand":"UPR","offers":[{"title":"Default Title","offer_id":48141310296322,"sku":"UPR-2025-10","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/upr-2025-10.jpg?v=1784983412"},{"product_id":"upr-79-04-mustang-3-16-k-member-spacer-kit","title":"UPR 79-04 Mustang 3\/16\" K-Member Spacer Kit","description":"\u003cp\u003e\u003cstrong\u003eUPR 79-04 Mustang 3\/16\" K-Member Spacer Kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e* UPR K-member 3\/16\" Spacer Kit\u003cbr\u003e* Laser Cut Spacer Plates\u003cbr\u003e* Properly Space K-member down 3\/16\"\u003cbr\u003e* Includes Grade 10.9 K-member mounting hardware\u003cbr\u003e* Increases hood clearance for bigger intakes or superchargers\u003cbr\u003e* Spacer plates are unfinished and hardware is all zinc plated\u003cbr\u003e\u003cbr\u003e\u003cfont color=\"#ff0000\"\u003eInnovative Bold Styling:\u003c\/font\u003e\u003cbr\u003e\u003cbr\u003eLooking for a  way to keep from having to replace or cut your stock hood but need the  extra clearance then look no further than UPR Products 3\/16\" K-member  Spacer Kit. Designed for use with the UPR Tubular K-member but will also  work with other K-members as well. This kit includes 4 laser cut plates  to match the foot print of the UPR K-member. Also includes all Grade  10.9 hardware that is longer than stock so it can accommodate the  thicker plates.\u003cbr\u003e\u003cbr\u003eOur Quality \u0026amp; Finish will leave you with a  grin from ear to ear as it is the Best looking unit available for your  Mustang or Cobra.\u003cbr\u003e\u003cbr\u003e\u003cfont color=\"#ff0000\"\u003eQuality Construction:\u003c\/font\u003e\u003cbr\u003e\u003cbr\u003eNo  one else can Stack up to the bold clean styling of our aftermarket  Billet \/ Stainless Steel Dress Ups, Street \/ Strip \/ Racing Suspension  and Performance Parts for your American Muscle Car!\u003cbr\u003e\u003cbr\u003e\u003cfont color=\"#ff0000\"\u003eFits these Vehicles:\u003c\/font\u003e\u003cbr\u003e\u003cbr\u003e1979 1980 1981 1982  1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996  1997 1998 1999 2000 2001 2002 2003 2004 Ford Mustang GT Mach 1 Bullitt  Cobra Saleen Steeda and Roush Vehicles.\u003cbr\u003e\u003cbr\u003eMade in the USA!\u003c\/p\u003e","brand":"UPR","offers":[{"title":"Default Title","offer_id":48141310427394,"sku":"UPR-2025-09","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/upr-2025-09.jpg?v=1784983416"},{"product_id":"upr-mustang-tubular-mild-steel-k-member-47602","title":"UPR Mustang Tubular Mild Steel K Member","description":"\u003cp\u003eUPR's all new Mild Steel K-member saves weight while adding maximum header and oil pan clearance. Designed for the abuse of hardcore drag race, road race, and Street Enthusiasts. Most importantly it will handle the everyday wear and tear of city \u0026amp; highway streets like that was it's main intent.\u003cbr\u003e\n\u003cbr\u003e\nAll of our Suspension Products are made with the Highest Quality materials and most expensive components. We spare no expense on our products and always stand behind them with our Lifetime warranty that no one else offers.\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n» Does NOT Alter Wheelbase\u003cbr\u003e\n» Seamless Mild Steel Tubing\u003cbr\u003e\n» Tig Welded in Billet fixtures\u003cbr\u003e\n» Saves 33lbs over the factory K-member\u003cbr\u003e\n» All Welding \u0026amp; Materials Made in the USA!\u003cbr\u003e\n» Can be used with UPR Non-Adjustable, Adjustable A Arms or Factory A Arms\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nInstalls in 3-6 hours.\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nIf using after market motor mounts the locating tab may have to be trimmed. Must re-use factory hardware.\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eFits These Vehicles:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n1996 1997 1998 1999 2000 2001 2002 2003 2004 GT Mach 1 Bullitt Mustang Cobra Shelby Roush Saleen \u0026amp; Steeda Vehicles.\u003cbr\u003e\n\u003cbr\u003e\nWill also bolt into a 79-95 Ford Mustang for use with a Modular 4.6 or 5.4 based engine.\u003cbr\u003e\n\u003cbr\u003e\nNo one else can stack up to the bold clean styling of our aftermarket Billet dress ups, Street Strip \u0026amp; Racing Suspension \u0026amp; Performance Parts for your late model American Muscle Car!\u003c\/p\u003e","brand":"UPR","offers":[{"title":"Default Title","offer_id":48141326385410,"sku":"UPR-2005-96S","price":339.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/96-04_mild_steel_k.jpg?v=1784983500"},{"product_id":"maximum-motorsports-05-2014-mustang-tubular-k-member","title":"Maximum Motorsports 05-2014 Mustang Tubular K Member - MM5KM-7","description":"\u003cp\u003eMM K-member for 2005-2014 Mustangs. This new MM design achieved not only our primary design goal of improved handling performance for a lowered Mustang, but it also met all of our secondary goals.\u003c\/p\u003eDesign Goals Achieved\u003cbr\u003e    -Optimized roll center height for a Mustang lowered to the limit of the American Iron rules.\u003cbr\u003e    -Stronger and stiffer than stock k-member, to allow less deflection under cornering and braking loads.\u003cbr\u003e    -Fits stock motor mounts, for least change in NVH\u003cbr\u003e    -Fits stock front control arms, with stock or aftermarket bushings\u003cbr\u003e    -Fits both electric and hydraulic steering racks\u003cbr\u003e    -Allows easy oil pan removal without requiring additional engine support\u003cbr\u003e    -Upgradable to SLA suspension\u003cbr\u003e\u003cbr\u003eRequired\u003cbr\u003e    -Bumpsteer kit. \u003cbr\u003e    -Some means to support the engine during installation.\u003cbr\u003e\u003cbr\u003eRelated Parts\u003cbr\u003e    Bumpsteer kit. A bumpsteer kit is required with the Mm5KM-7.\u003cbr\u003e    Bumpsteer gauge. This gauge makes proper installation of the bumpsteer kit easy.\u003cbr\u003e    Engine support brace. Makes installation easier and faster. \u003cbr\u003e    Lightweight radiator core support. \u003cbr\u003e    Core support brace\/adjustable mount for swaybar. \u003cbr\u003e    Extreme Lowering Kit with spacer and bolt-through bumpsteer kit to allow use of upper control arm pivot holes.\u003cbr\u003e\u003cbr\u003eFits\u003cbr\u003e    -2005-2014 Mustang\u003cbr\u003e    -Stock motor mounts\u003cbr\u003e    -Urethane replacement motor mounts\u003cbr\u003e    -Stock front control arms, 2005-2014\u003cbr\u003e    -Stock front control arm bushings\u003cbr\u003e    -Aftermarket replacement control arm bushings, urethane and Delrin\u003cbr\u003e    -2005-2010 hydraulic steering rack\u003cbr\u003e    -2011-2014 electric steering rack","brand":"Maximum Motorsports","offers":[{"title":"Default Title","offer_id":48141341229314,"sku":"MM-MM5KM-7","price":989.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/mm5km-7_view2_lg.jpg?v=1784983585"},{"product_id":"maximum-motorsports-mm5rbo-3-e-z-remove-door-bar-field-retrofit-kit-2005-2014-mustang-hardtop","title":"Maximum Motorsports E-Z-Remove Door Bar Field Retrofit Kit (2005-2014 Mustang Hardtop) - Mm5RBO-3","description":"Kit to install easily-removable door bars on a previously-installed MM 4-point roll bar. MM's E-Z-Remove door bars can be detached and removed in moments.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits these previously installed MM 4-point roll bars:\u003c\/strong\u003e\u003cbr\u003eMm5RB-20.1\u003cbr\u003eMm5RB-20.2\u003cbr\u003eMm5RB-20.3\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBenefits\u003c\/strong\u003e\u003cbr\u003eAdds door bars to the MM 4-point roll bar already in your Mustang.\u003cbr\u003eThe standard door bars of the MM 6-point roll bars can be difficult and time-consuming to remove and reinstall. When removed, bolt holes in the floor are exposed.\u003cbr\u003e\u003cbr\u003eAfter retrofitting to the E-Z-Remove door bars, both door bars can be easily removed in just a couple of minutes, and there are no holes left exposed in the floor.\u003cbr\u003e\u003cbr\u003eLeave the E-Z-Remove door bars out for daily driving.\u003cbr\u003eWhen heading to the track, reinstall them in moments.\u003cbr\u003eMeets the NHRA and NMRA rules for removable door bars.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis kit includes:\u003c\/strong\u003e\u003cbr\u003e(2) E-Z-Remove door bars\u003cbr\u003e(2) floor mounts unique to the E-Z-Remove door bars\u003cbr\u003e(2) floor-mount doubler plates\u003cbr\u003e(2) mounting spuds for the main hoop\u003cbr\u003eAll hardware required\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003cbr\u003eWelding is required. The two mounting spuds must be welded to the main hoop. No other welding is needed.\u003cbr\u003eThe Mm5RB-20.2 4-point roll bar will meet the NHRA\/NMRA rules with the addition of the Mm5RBO-3 E-Z-Remove door bars.\u003cbr\u003eE-Z-Remove door bars are available on new roll bars: Mm5RB-24, Mm5RB-24.5, Mm5RB-24.6\u003cbr\u003eTo upgrade your 6-point roll bar to E-Z-Remove door bars use Mm5RBO-2.\u003cbr\u003eRead the Mm5RBO-3 door bar installation instructions before purchasing.\u003cbr\u003e","brand":"Maximum Motorsports","offers":[{"title":"Default Title","offer_id":48141436059906,"sku":"MM-Mm5RBO-3","price":347.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/getimage.ashx_1_1.jpg?v=1784984112"},{"product_id":"maximum-motorsports-mm5rbo-4-mm-roll-bar-support-brackets-2005-2014-mustang-hardtop","title":"Maximum Motorsports MM Roll Bar Support Brackets (2005-2014 Mustang Hardtop) - Mm5RBO-4","description":"\u003cp\u003eMM-designed roll bar mounts for the S197 chassis replace the thin OEM B-pillar gussets with a very robust support bracket. This bracket is the perfect foundation for a custom roll cage. Using these brackets will greatly reduce fabrication time. These are the same brackets we include in all of our roll bars for 2005-2014 Mustangs. Meets the NHRA rules. Bolt-in or weld-in.\u003c\/p\u003e","brand":"Maximum Motorsports","offers":[{"title":"Default Title","offer_id":48141436911874,"sku":"MM-Mm5RBO-4","price":217.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/getimage-2.ashx_2.jpg?v=1784984109"},{"product_id":"steeda-road-race-front-k-member-2015-2026-mustang-gt-shelby-gt350-555-5061","title":"Steeda Road Race Front K-Member (2015-2026 Mustang GT \/ Shelby GT350) - 555-5061","description":"\u003cp\u003eImprove weight distribution and handling with Steeda's Road Race K-Member. Track tested with proven results, the Steeda Road Race K-Member will help to cut down lap times and provide the driver with better feel of their Mustang.\u003cbr\u003e\n\u003cbr\u003e\nWeight Savings. Weight is the enemy of performance, and weight distribution is critical on performance cars. That's why Steeda has designed the Road Race K-Member to reduce weight and help with weight distribution so that you can corner better and have more control over your S550 \/ S650.\u003cbr\u003e\n\u003cbr\u003e\nAdds Rigidity. The Steeda Road-Race K-Member mounts at key points and has bracing to add strength to specific points. All factory mounting points have been utilized for improved strength and the tension and lateral link mounts have been boxed and gusseted.\u003cbr\u003e\n\u003cbr\u003e\nFactory Mounting Positions. The factory mounting positions are retained to allow for ease of use and to retain compatibility with OE components. The Road-Race K-Member is compatible with OEM steering and suspension and factory sway bar mounts. Factory engine mounts are retained as well but upgrading to Steeda Engine Mounts is recommended.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eBenefits:\u003cbr\u003e\u003c\/strong\u003e 20% lighter than the factory K-member.\u003cbr\u003e\nDesigned for road race applications.\u003cbr\u003e\nBolt-in design does not require any modifications.\u003cbr\u003e\nRetains all factory mounting locations.\u003cbr\u003e\nAdjustable front track width.\u003cbr\u003e\nAdjustable front Roll center.\u003cbr\u003e\nBuilt-in, adjustable G-Trac Brace (for long tube headers). Built-in tie down hooks for easy use when trailering.\u003cbr\u003e\nMagneride sensor hookups to maintain Magneride.\u003cbr\u003e\nAdditional bracing in key areas.\u003cbr\u003e\nUsed on our #20 car and Red ’18 HPDE car in testing.\u003cbr\u003e\nCompetition proven on our #20 car.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNotes:\u003c\/strong\u003e This K-member is designed for off road competition use only and is not covered under any warranty stated or implied. This item ships by truck freight; additional charges will apply if shipping to a residential address.\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145947525378,"sku":"SDA-555-5061","price":1999.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/fdsggfdssfdgfgdsfsd.jpg?v=1785005692"},{"product_id":"steeda-drag-front-k-member-2015-2026-mustang-gt-shelby-gt350-555-5060","title":"Steeda Drag Front K-Member (2015-2026 Mustang GT \/ Shelby GT350) - 555-5060","description":"\u003cp\u003ePut your 2015+ S550 \/ S650 Mustang on a diet with Steeda's Drag Front K-Member.\u003cbr\u003e\n\u003cbr\u003e\nSheds nearly 30lbs off the nose of your American made muscle car (OE k-member weighs 61 lbs versus the Steeda k-member weighs only 36lbs) this lightweight K-member is made from powder coated mandrel bent DOM steel.\u003cbr\u003e\n\u003cbr\u003e\nStrongest K-member in the Market. Boxed and gusseted tension link and lateral link mounts for the ultimate in strength.\u003cbr\u003e\n\u003cbr\u003e\nDesigned for drag race applications Steeda's drag K-Member will provide additional adjustment for roll center correction on lowered cars. It also provides additional clearance for headers and increased oil pan clearance. Also included are the welded tie down loops for trailer towing to the track.\u003cbr\u003e\n\u003cbr\u003e\nRetains Factory mounting locations Our K-Member retains all the OEM suspension and steering components, as well as the factory front sway bar mounts. It uses the factory 5.0L \u0026amp; 5.2L engine mounts, though we recommend upgrading to Steeda mounts found HERE.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNOTES:\u003cbr\u003e\u003c\/strong\u003e This K-member is designed for off road competition use only and is not covered under any warranty stated or implied whatsoever.\u003cbr\u003e\nThis item ships by truck freight; additional charges will apply if shipping to a residential address.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eProduct Benefits:\u003cbr\u003e\u003c\/strong\u003e Designed for drag race applications\u003cbr\u003e\nWeighs only 36lbs, nearly 30lbs lighter than the stock K-Member\u003cbr\u003e\nBolt-In design does not require any modifications\u003cbr\u003e\nUtilizes all factory mounting locations for strength and rigidity\u003cbr\u003e\nIncorporated tie down loops for easy use when trailering\u003cbr\u003e\nIncludes option to retain front swaybar\u003cbr\u003e\nDeveloped and used on our World Record Setting S550 Mustang\u003cbr\u003e\nExtra clearance for long tube headers and has tabs for Helion Turbo Kits\u003cbr\u003e\nBoxed and gusseted tension link and lateral link mounts for the ultimate in strength making it the strongest S550 \/ S650 K-member on the market!\u003cbr\u003e\nAdjustable roll center and wheel base for better aerodynamics\u003cbr\u003e\nProvision and tabs for Hellion turbo kit\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":48145947754754,"sku":"SDA-555-5060","price":1574.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/adsfadfsadsfdsfdfs.jpg?v=1785005689"},{"product_id":"upr-aluminum-ultra-light-k-member-1-4-4pc-spacer-shim-kit-1979-2004-mustang-2025-85","title":"UPR Aluminum Ultra Light K-Member 1\/4\" 4pc Spacer Shim Kit (1979-2004 Mustang) - 2025-85","description":"\u003cp\u003eGain that extra hood clearance while adding minimal weight to your front end with these Aluminum Ultra Light K-member spacers from UPR Products. Made from aluminum and featuring a durable black anodized finish. Available in 1\/4\", 1\/2\", 3\/4\" and 1\" spacing. Perfect solution for anyone needing extra hood, steering, header or transmission clearance.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eProduct Features\u003cbr\u003e\u003c\/strong\u003e » Black Anodized Finish\u003cbr\u003e\n» Grade 10.9 Hardware Included\u003cbr\u003e\n» Lightweight Aluminum Spacers\u003cbr\u003e\n» 1\/4in \u0026amp; 1\/2in Kit 4pc, 3\/4in \u0026amp; 1in Kit 8pc\u003cbr\u003e\n» 70% Lighter than the same size spacer made from Mild Steel\u003cbr\u003e\n» Works with UPR and most aftermarket and factory K-members\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eInstallation:\u003cbr\u003e\u003c\/strong\u003e Installs in approximately 1 hour\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eFitment:\u003cbr\u003e\u003c\/strong\u003e 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 Ford Mustang LX GT GTS 4.6 5.0 5.8 281 302 351 Cobra Saleen \u0026amp; Roush Vehicles.\u003c\/p\u003e","brand":"UPR","offers":[{"title":"Default Title","offer_id":48146310234370,"sku":"UPR-2025-85","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/2025-86__42331.jpg?v=1785007405"},{"product_id":"kelltrac-bmr-km760-mounting-kit-2020-2022-shelby-gt500-kti-760mk-500","title":"Kelltrac BMR-KM760 Mounting Kit (2020-2022 Shelby GT500) - KTI-760MK-500","description":"\u003cdiv\u003eAfter years and years of requests, we have finally come out with a solution for the 2020 - 2022 Mustang Shelby GT500 to run a BMR Suspension KM760 Tubular K-Member!\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eWhen you install a BMR-KM760 K-Member on a GT500 you are left with no option of retaining the mounting points for the additional (3) front coolers. This kit is an easy and lightweight high quality solution!\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThis kit is designed to be an easy solution and installs in minutes!\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eKit Includes: \u003c\/div\u003e\n\u003cdiv\u003e(2) Carbon-Nylon Forward Mounting Brackets driver and passenger side\u003c\/div\u003e\n\u003cdiv\u003e(2) Carbon-Nylon L-Brackets for driver and passenger side extensions \u003c\/div\u003e\n\u003cdiv\u003e(4) 3\/8-24 Zinc Coated Fine Thread 2.00\" long Bolts\u003c\/div\u003e\n\u003cdiv\u003e(2) 3\/8-24 Zinc Coated Fine Thread 1.25\" long Bolts \u003c\/div\u003e\n\u003cdiv\u003e(6) 3\/8-24 Zinc Coated Fine Thread Poly Loc Nuts\u003c\/div\u003e\n\u003cdiv\u003e(10) Zinc Coated 0.800\" Diameter Washers for 3\/8 Bolts\u003c\/div\u003e\n\u003cdiv\u003e(4) 1\/2\" Long Aluminum Screws for front of extensions\u003c\/div\u003e","brand":"Kelltrac","offers":[{"title":"Default Title","offer_id":48149857665282,"sku":"KTI-760MK-500","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/kti-760mk-500.jpg?v=1785023530"},{"product_id":"upr-products-chrome-moly-tubular-k-member-no-motor-mounts-s197-2005-2014-mustangs-2005-05-nm","title":"UPR Products Chrome Moly Tubular K-Member No Motor Mounts S197 (2005-2014 Mustangs) - 2005-05-NM","description":"UPR's all new 2005-2014 Mustang Chrome Moly K-member with No Motor Mounts - will save more weight and exceed any strength limitations of mild steel while allowing maximum header and oil pan clearance. This kit was designed for the abuse of hardcore drag race, road race, and Street Enthusiasts most importantly it will handle the everyday wear and tear of city \u0026amp; highway streets like that was it's main intent. For use with motor plates for engine mounting. \u003cbr\u003e\u003cbr\u003e\n\nThe factory K-member weighs in at 46lbs our Chrome Moly K-member only weighs 22lbs saving 24lbs off the nose of your car where it's needed most. Works with factory A arms and with factory electronic steering rack on 11-14 Mustangs.\u003cbr\u003e\u003cbr\u003e\n \nMade with 4130 seamless Chrome Moly tubing sourced in the USA for maximum weight savings and strength\u003cbr\u003e\u003cbr\u003e\n\nInstalls in 3-5 hours. \u003cbr\u003e\u003cbr\u003e\n \nProduct Features:\u003cbr\u003e\n» Hardware Included\u003cbr\u003e\n» No Motor Mounts \u003cbr\u003e\n» Silver Powder Coated Finish\u003cbr\u003e\n» Tig Welded in Billet Fixtures\u003cbr\u003e\n» 4130 Seamless Chrome Moly Tubing\u003cbr\u003e\n» Lighter and Stronger than Mild Steel\u003cbr\u003e\n» Saves 24lbs over the factory K-member\u003cbr\u003e\n» All Welding \u0026amp; Materials Made in the USA!\u003cbr\u003e\u003cbr\u003e\n\n\nFits These Vehicles:\u003cbr\u003e\n2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Mustang GT GT500 Boss 302, Bullitt S197 4.6 5.0 Coyote\u003cbr\u003e\u003cbr\u003e\n\n\nMade in the USA!\u003cbr\u003e\u003cbr\u003e\n\n\nQ \u0026amp; A\u003cbr\u003e\u003cbr\u003e\n\nQuestion: Can I use stock motor mounts with this K-member?\u003cbr\u003e\nAnswer: No this version of our K-member do not have motor mounts or provisions for motor mounts. You must mount your engine with motor plates, which is typical in dedicated race cars or when swapping engines into your car. \u003cbr\u003e\u003cbr\u003e\n\n\nQuestion: Does this K-member move the tires forward or backward like others?\u003cbr\u003e\nAnswer: No it retains the factory wheelbase and places the wheels in the factory location.","brand":"UPR","offers":[{"title":"Default Title","offer_id":48150057255170,"sku":"2005-05-NM","price":749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/2005-05-nm_1.jpg?v=1785024844"},{"product_id":"upr-products-96-04-mustang-tubular-chrome-moly-k-member","title":"UPR Products 96-04 Mustang Tubular Chrome Moly K Member","description":"\u003cp\u003e* 4130 Seamless Chrome Moly Tubing\u003cbr\u003e\n* Tig Welded in Billet Fixture\u003cbr\u003e\n* Silver Powder Coated Finish\u003cbr\u003e\n* Lighter and Stronger than Mild Steel\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan\u003eQuality Construction:\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\nUPR's all new Chrome Moly K-member - will save more weight and exceed any strength limitations of mild steel while allowing maximum header and oil pan clearance, This kit was designed for the abuse of hardcore drag race, road race, and Street Enthusiasts most importantly it will handle the everyday wear and tear of city \u0026amp; highway streets like that was it's main intent.\u003cbr\u003e\n\u003cbr\u003e\nUPR Recommends the purchase of a bumpsteer kit with this product. Caster Camber plates are required for this product to fit correctly.\u003cbr\u003e\n\u003cbr\u003e\nNo one else gives you the bold clean styling of our Aftermarket Dress Ups, Suspension and Performance Parts for your American Muscle Car like UPR Products!\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan\u003eFits these vehicles:\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n1996 1997 1998 1999 2000 2001 2002 2003 2004 LX GT GTS Mustang Cobra Shelby Roush Saleen \u0026amp; Steeda Vehicles.\u003cbr\u003e\n\u003cbr\u003e\nIf using after market motor mounts the locating tab may have to be trimmed. Must re-use factory hardware.\u003cbr\u003e\n\u003cbr\u003e\nWill also bolt into a 79-95 Ford Mustang for use with a Modular 4.6 or 5.4 based engine.\u003cbr\u003e\n\u003cbr\u003e\nMADE IN THE USA\u003c\/p\u003e","brand":"UPR","offers":[{"title":"Default Title","offer_id":48150090875138,"sku":"UPR-2005-96","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/2005-96.jpg?v=1785025083"},{"product_id":"upr-mustang-tubular-mild-steel-k-member-kit-1996-2004-mustang","title":"UPR Mustang Tubular Mild Steel K Member Kit (1996-2004 Mustang)","description":"\u003cp\u003eUPR's all new Mild Steel K-member saves weight while adding maximum header and oil pan clearance. Designed for the abuse of hardcore drag race, road race, and Street Enthusiasts. Most importantly it will handle the everyday wear and tear of city \u0026amp; highway streets like that was it's main intent.\u003cbr\u003e\n\u003cbr\u003e\nIncludes UPR Coil Over Kit with exclusive designed adjuster nut with new set screw to ensure it never looses it's setting! Also requires no tools to adjust ride height.\u003cbr\u003e\n\u003cbr\u003e\nUPR Recommends the purchase of a bump steer kit with this product. Caster Camber plates are required due to the added stress on the strut tower.\u003cbr\u003e\n\u003cbr\u003e\nAll of our Suspension Products are made with the Highest Quality materials and most expensive components. We spare no expense on our products and always stand behind them with our Lifetime warranty that no one else offers.\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n» Does NOT Alter Wheelbase\u003cbr\u003e\n» Seamless Mild Steel Tubing\u003cbr\u003e\n» Tig Welded in Billet fixtures\u003cbr\u003e\n» Save 64lbs over stock K-member \u0026amp; A arms\u003cbr\u003e\n» All Welding \u0026amp; Materials Made in the USA!\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nInstalls in 3-6 hours.\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n1 - Mild Steel Tubular K-member Black Powder Coated\u003cbr\u003e\n2 - Mild Steel Tubular A-arms Black Powder Coated\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nIf using after market motor mounts the locating tab may have to be trimmed. Must re-use factory hardware.\u003cbr\u003e\n\u003cbr\u003e\n\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eFits These Vehicles:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n1996 1997 1998 1999 2000 2001 2002 2003 2004 GT Mach 1 Bullitt Mustang Cobra Shelby Roush Saleen \u0026amp; Steeda Vehicles.\u003cbr\u003e\n\u003cbr\u003e\nNo one else can stack up to the bold clean styling of our aftermarket Billet dress ups, Street Strip \u0026amp; Racing Suspension \u0026amp; Performance Parts for your late model American Muscle Car!\u003c\/p\u003e","brand":"UPR","offers":[{"title":"Default Title","offer_id":48150091890946,"sku":"UPR-2005-96SK-100","price":769.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/2005-96k-100_1.jpg?v=1785025094"},{"product_id":"upr-chromoly-tubular-k-member-2011-2014-mustang-2005-11","title":"UPR Chromoly Tubular K Member (2011-2014 Mustang) - 2005-11","description":"\u003cdiv\u003eUPR's all new 2005-2014 Mustang Chrome Moly K-member - will save more weight and exceed any strength limitations of mild steel while allowing maximum header and oil pan clearance. This kit was designed for the abuse of hardcore drag race, road race, and Street Enthusiasts most importantly it will handle the everyday wear and tear of city \u0026amp; highway streets like that was it's main intent. Featuring built in engine mounts that can be set to stock engine height or 1\/2\" lowered for additional hood clearance. Great for aftermarket intakes or superchargers. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe factory K-member weighs in at 46lbs our Chrome Moly K-member only weighs 24lbs saving 22lbs off the nose of your car where it's needed most. Works with factory A arms and with factory electronic steering rack on 11-14 Mustangs.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eMade with 4130 seamless Chrome Moly tubing sourced in the USA for maximum weight savings and strength\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eInstalls in 3-5 hours. \u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e» Hardware Included\u003c\/div\u003e\n\u003cdiv\u003e» Integrated Adjustable Engine Mount \u003c\/div\u003e\n\u003cdiv\u003e» Silver Powder Coated Finish\u003c\/div\u003e\n\u003cdiv\u003e» Tig Welded in Billet Fixtures\u003c\/div\u003e\n\u003cdiv\u003e» Engine will sit at stock height\u003c\/div\u003e\n\u003cdiv\u003e» 4130 Seamless Chrome Moly Tubing\u003c\/div\u003e\n\u003cdiv\u003e» Lighter and Stronger than Mild Steel\u003c\/div\u003e\n\u003cdiv\u003e» Saves 22lbs over the factory K-member\u003c\/div\u003e\n\u003cdiv\u003e» All Welding \u0026amp; Materials Made in the USA!\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eFits These Vehicles:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Mustang GT GT500 Boss 302, Bullitt S197 4.6 5.0 Coyote\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eMade in the USA!\u003c\/strong\u003e\u003c\/div\u003e","brand":"UPR","offers":[{"title":"Default Title","offer_id":48150094708994,"sku":"UPR-2005-11","price":749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/2005-05-i2_297ebdd3-7470-4c6e-bfbc-b235dca7623c.jpg?v=1785025116"},{"product_id":"maximum-motorsports-1996-04-mustang-drag-race-k-member-package-with-standard-geometry-arms-and-delrin-bushings-for-koni-tokico-struts","title":"Maximum Motorsports 1996-04 Mustang Drag Race K Member Package with Standard Geometry Arms and Delrin Bushings (for Koni\/Tokico Struts) - MMKMP-28","description":"\u003cp\u003eK-member Packages include all of the items needed to upgrade your front suspension with a high performance Maximum Motorsports K-Member except struts. For more information see the complete descriptions for each individual component. Saves 40 pounds over stock components! We recommend the following parts to accompany the installation of a K-Member Package:\u003c\/p\u003e\u003cbr\u003eMM Strut Tower Brace\u003cbr\u003eHigh performance struts (required) to match your spring rate\u003cbr\u003eMM Solid steering shaft\u003cbr\u003eAn MM Oil Filter Relocation kit is required for 2003-04 Cobra and Mach 1 Mustangs, as well as any 4.6L 4V engine with an OEM oil cooler.\u003cbr\u003e\u003cbr\u003e\u003cp\u003eWhen ordering, please specify your front swaybar diameter and chosen coil-over spring rate in the special order instructions field during checkout. If you need help choosing your spring rate, contact a Lethal Performance sales rep.\u003c\/p\u003e\u003cbr\u003ePackage Includes:\u003cbr\u003eMM K-Member\u003cbr\u003eMM Front Control arms\u003cbr\u003eMM Front Coil-Over Conversion kit\u003cbr\u003eMM Aluminum Steering Rack Bushings\u003cbr\u003eMM Caster\/Camber plates*\u003cbr\u003eMM Adjustable Tie-Rod Ends\u003cbr\u003eMM 2-Point K-Member Brace\u003cbr\u003eUrethane front swaybar bushings\u003cbr\u003eSwaybar end links (shorter)\u003cbr\u003e\u003cbr\u003e\u003cp\u003e* Available in chrome for an additional $50. Select finish from drop down.\u003c\/p\u003e","brand":"Maximum Motorsports","offers":[{"title":"Default Title","offer_id":48150095069442,"sku":"MM-MMKMP-28","price":2495.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/mmkmp-28.jpg?v=1785025120"},{"product_id":"maximum-motorsports-1996-04-mustang-auto-x-road-race-k-member-package-with-offset-geometry-arms-and-delrin-bushings-for-koni-tokico-struts","title":"Maximum Motorsports 1996-04 Mustang Auto-X\/Road Race K Member Package with Offset Geometry Arms and Delrin Bushings (for Koni\/Tokico Struts) - MMKMP-32","description":"\u003cp\u003eK-member Packages include all of the items needed to upgrade your front suspension with a high performance Maximum Motorsports K-Member except struts. For more information see the complete descriptions for each individual component. Saves 40 pounds over stock components! We recommend the following parts to accompany the installation of a K-Member Package:\u003c\/p\u003e\u003cbr\u003eMM Strut Tower Brace\u003cbr\u003eHigh performance struts (required) to match your spring rate\u003cbr\u003eMM Solid steering shaft\u003cbr\u003eAn MM Oil Filter Relocation kit is required for 2003-04 Cobra and Mach 1 Mustangs, as well as any 4.6L 4V engine with an OEM oil cooler.\u003cbr\u003e\u003cbr\u003e\u003cp\u003eWhen ordering, please specify your front swaybar diameter and chosen coil-over spring rate in the special order instructions field during checkout. If you need help choosing your spring rate, contact a Lethal Performance sales rep.\u003c\/p\u003e\u003cbr\u003ePackage Includes:\u003cbr\u003eMM K-Member\u003cbr\u003eMM Front Control arms\u003cbr\u003eMM Front Coil-Over Conversion kit\u003cbr\u003eMM Aluminum Steering Rack Bushings\u003cbr\u003eMM Caster\/Camber plates*\u003cbr\u003eMM Adjustable Tie-Rod Ends\u003cbr\u003eMM 2-Point K-Member Brace\u003cbr\u003eUrethane front swaybar bushings\u003cbr\u003eSwaybar end links (shorter)\u003cbr\u003eMM Front Swaybar Relocation Kit (Only included in kits with forward offset control arms)\u003cbr\u003e\u003cbr\u003e\u003cp\u003e* Available in chrome for an additional $50. Select finish from drop down.\u003c\/p\u003e","brand":"Maximum Motorsports","offers":[{"title":"Default Title","offer_id":48150095134978,"sku":"MM-MMKMP-32","price":2495.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/mmkmp-28_1_1_1_1.jpg?v=1785025121"},{"product_id":"maximum-motorsports-1996-04-mustang-street-strip-k-member-package-with-standard-geometry-arms-and-urethane-bushings-for-koni-tokico-struts","title":"Maximum Motorsports 1996-04 Mustang Street\/Strip K Member Package with Standard Geometry Arms and Urethane Bushings (for Koni\/Tokico Struts) - MMKMP-26","description":"\u003cp\u003eK-member Packages include all of the items needed to upgrade your front suspension with a high performance Maximum Motorsports K-Member except struts. For more information see the complete descriptions for each individual component. Saves 40 pounds over stock components! We recommend the following parts to accompany the installation of a K-Member Package:\u003c\/p\u003e\u003cbr\u003eMM Strut Tower Brace\u003cbr\u003eHigh performance struts (required) to match your spring rate\u003cbr\u003eMM Solid steering shaft\u003cbr\u003eAn MM Oil Filter Relocation kit is required for 2003-04 Cobra and Mach 1 Mustangs, as well as any 4.6L 4V engine with an OEM oil cooler.\u003cbr\u003e\u003cbr\u003e\u003cp\u003eWhen ordering, please specify your front swaybar diameter and chosen coil-over spring rate in the special order instructions field during checkout. If you need help choosing your spring rate, contact a Lethal Performance sales rep.\u003c\/p\u003e\u003cbr\u003ePackage Includes:\u003cbr\u003eMM K-Member\u003cbr\u003eMM Front Control arms\u003cbr\u003eMM Front Coil-Over Conversion kit\u003cbr\u003eMM Aluminum Steering Rack Bushings\u003cbr\u003eMM Caster\/Camber plates*\u003cbr\u003eMM Adjustable Tie-Rod Ends\u003cbr\u003eMM 2-Point K-Member Brace\u003cbr\u003eUrethane front swaybar bushings\u003cbr\u003eSwaybar end links (shorter)\u003cbr\u003e\u003cbr\u003e\u003cp\u003e* Available in chrome for an additional $50. Select finish from drop down.\u003c\/p\u003e","brand":"Maximum Motorsports","offers":[{"title":"Default Title","offer_id":48150095167746,"sku":"MM-MMKMP-26","price":2395.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/mmkmp-28_1_1.jpg?v=1785025117"},{"product_id":"maximum-motorsports-1996-04-mustang-street-strip-k-member-package-with-standard-geometry-arms-and-urethane-bushings-for-bilstein-struts","title":"Maximum Motorsports 1996-04 Mustang Street\/Strip K Member Package with Standard Geometry Arms and Urethane Bushings (for Bilstein Struts) - MMKMP-25","description":"\u003cp\u003eK-member Packages include all of the items needed to upgrade your front suspension with a high performance Maximum Motorsports K-Member except struts. For more information see the complete descriptions for each individual component. Saves 40 pounds over stock components! We recommend the following parts to accompany the installation of a K-Member Package:\u003c\/p\u003e\u003cbr\u003eMM Strut Tower Brace\u003cbr\u003eHigh performance struts (required) to match your spring rate\u003cbr\u003eMM Solid steering shaft\u003cbr\u003eAn MM Oil Filter Relocation kit is required for 2003-04 Cobra and Mach 1 Mustangs, as well as any 4.6L 4V engine with an OEM oil cooler.\u003cbr\u003e\u003cbr\u003e\u003cp\u003eWhen ordering, please specify your front swaybar diameter and chosen coil-over spring rate in the special order instructions field during checkout. If you need help choosing your spring rate, contact a Lethal Performance sales rep.\u003c\/p\u003e\u003cbr\u003ePackage Includes:\u003cbr\u003eMM K-Member\u003cbr\u003eMM Front Control arms\u003cbr\u003eMM Front Coil-Over Conversion kit\u003cbr\u003eMM Aluminum Steering Rack Bushings\u003cbr\u003eMM Caster\/Camber plates*\u003cbr\u003eMM Adjustable Tie-Rod Ends\u003cbr\u003eMM 2-Point K-Member Brace\u003cbr\u003eUrethane front swaybar bushings\u003cbr\u003eSwaybar end links (shorter)\u003cbr\u003e\u003cbr\u003e\u003cp\u003e* Available in chrome for an additional $50. Select finish from drop down.\u003c\/p\u003e","brand":"Maximum Motorsports","offers":[{"title":"Default Title","offer_id":48150095266050,"sku":"MM-MMKMP-25","price":2417.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/mmkmp-28_1.jpg?v=1785025121"},{"product_id":"maximum-motorsports-1996-04-mustang-auto-x-road-race-k-member-package-with-offset-geometry-arms-and-delrin-bushings-for-bilstein-struts","title":"Maximum Motorsports 1996-04 Mustang Auto-X\/Road Race K Member Package with Offset Geometry Arms and Delrin Bushings (for Bilstein Struts) - MMKMP-31","description":"\u003cp\u003eK-member Packages include all of the items needed to upgrade your front suspension with a high performance Maximum Motorsports K-Member except struts. For more information see the complete descriptions for each individual component. Saves 40 pounds over stock components! We recommend the following parts to accompany the installation of a K-Member Package:\u003c\/p\u003e\u003cbr\u003eMM Strut Tower Brace\u003cbr\u003eHigh performance struts (required) to match your spring rate\u003cbr\u003eMM Solid steering shaft\u003cbr\u003eAn MM Oil Filter Relocation kit is required for 2003-04 Cobra and Mach 1 Mustangs, as well as any 4.6L 4V engine with an OEM oil cooler.\u003cbr\u003e\u003cbr\u003e\u003cp\u003eWhen ordering, please specify your front swaybar diameter and chosen coil-over spring rate in the special order instructions field during checkout. If you need help choosing your spring rate, contact a Lethal Performance sales rep.\u003c\/p\u003e\u003cbr\u003ePackage Includes:\u003cbr\u003eMM K-Member\u003cbr\u003eMM Front Control arms\u003cbr\u003eMM Front Coil-Over Conversion kit\u003cbr\u003eMM Aluminum Steering Rack Bushings\u003cbr\u003eMM Caster\/Camber plates*\u003cbr\u003eMM Adjustable Tie-Rod Ends\u003cbr\u003eMM 2-Point K-Member Brace\u003cbr\u003eUrethane front swaybar bushings\u003cbr\u003eSwaybar end links (shorter)\u003cbr\u003eMM Front Swaybar Relocation Kit (Only included in kits with forward offset control arms)\u003cbr\u003e\u003cbr\u003e\u003cp\u003e* Available in chrome for an additional $50. Select finish from drop down.\u003c\/p\u003e","brand":"Maximum Motorsports","offers":[{"title":"Default Title","offer_id":48150095495426,"sku":"MM-MMKMP-31","price":2517.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/mmkmp-28_1_1_1.jpg?v=1785025119"},{"product_id":"maximum-motorsports-mm5rb-20-5-street-strip-6-point-mustang-roll-bar-standard-door-bars-removable-harness-mount-2005-2014-mustang-hardtop","title":"Maximum Motorsports Street Strip 6-point Mustang Roll Bar, Standard Door Bars, Removable Harness Mount (2005-2014 Mustang Hardtop) - Mm5RB-20.5","description":"Street and Strip 6-point Mustang roll bar, with standard door bars and removable harness mount tube, for 2005-2014 Mustang coupes. \u003cbr\u003e\u003cbr\u003eThis Mustang Roll Bar:\u003cbr\u003e6-point\u003cbr\u003eStandard door bars\u003cbr\u003eRemovable harness mount tube\u003cbr\u003eDoes not fit Mustangs with the Glass Roof option because the headliner in those Mustangs is considerably lower and interferes with the main hoop.\u003cbr\u003e2013 Note: Ford changed the interior plastic of the 2013 model year hardtop Mustangs. While all of the MM roll bars fit the 2013 models, we have not yet updated the installation instructions to show the new procedure required to trim the interior plastic around the rear braces. \u003cbr\u003e\u003cbr\u003eE-Z-Remove door bars are now available.\u003cbr\u003eThe E-Z-Remove door bars are easily removed from your Mustang. Simply remove two bolts and the door bar is gone in seconds. The Mm5RB-24.5 is the version with these door bars.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003cbr\u003eDoes NOT meet NHRA or NMRA rules for drag racing. Any model roll bar that does not include high-mounted door bars and have a welded-in harness mount brace does not meet the NHRA or NMRA rules.\u003cbr\u003eRoll bars should have padding wherever any part of an occupant's body may come into contact with the steel tubing. This includes hands, feet, arms, and legs, not just the occupants' heads. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecial-Order Option\u003c\/strong\u003e\u003cbr\u003eDiagonal Brace: Located in the plane of the main hoop, the welded-on diagonal brace greatly improves rollover protection and increases chassis rigidity. Made from 1-3\/4\" diameter by 0.134\" wall DOM tube. Note that the diagonal brace is not removable; it will remain in place when the harness mount tube is removed.\u003cbr\u003e\u003cbr\u003eTo order a Diagonal Brace, select the \"Diagonal Brace Option\" checkbox before adding to your shopping cart: \u003cbr\u003e\u003cbr\u003eWe do not stock roll bars with the special-order options. Allow 2-4 weeks for manufacturing.\u003cbr\u003e\u003cbr\u003e","brand":"Maximum Motorsports","offers":[{"title":"Default Title","offer_id":48150150906114,"sku":"MM-Mm5RB-20.5","price":1367.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/getimage.ashx_3_9586dd62-521b-4b74-b7da-1efa6b1b2a17.jpg?v=1785025521"},{"product_id":"maximum-motorsports-mm5rb-20-drag-race-6-point-mustang-roll-bar-standard-door-bars-fixed-harness-mount-2005-2014-mustang-hardtop","title":"Maximum Motorsports Drag Race 6-point Mustang Roll Bar, Standard Door Bars, Fixed Harness Mount (2005-2014 Mustang Hardtop) - Mm5RB-20","description":"Drag race 6-point Mustang roll bar, with standard door bars and fixed harness mount tube welded in place, for 2005-2014 Mustang coupes. \u003cbr\u003e\u003cbr\u003eThis Mustang Roll Bar:\u003cbr\u003e6-point\u003cbr\u003eStandard door bars\u003cbr\u003eFixed harness mount tube\u003cbr\u003eMeets NHRA and NMRA rules for drag racing\u003cbr\u003eDoes not fit Mustangs with the Glass Roof option because the headliner in those Mustangs is considerably lower and interferes with the main hoop.\u003cbr\u003e2013 Note: Ford changed the interior plastic of the 2013 model year hardtop Mustangs. While all of the MM roll bars fit the 2013 models, we have not yet updated the installation instructions to show the new procedure required to trim the interior plastic around the rear braces. \u003cbr\u003e\u003cbr\u003eE-Z-Remove door bars are now available.\u003cbr\u003eThe E-Z-Remove door bars are easily removed from your Mustang. Simply remove two bolts and the door bar is gone in seconds. The Mm5RB-24 is the version with these door bars.\u003cbr\u003e\u003cbr\u003eNotes\u003cbr\u003eAny model roll bar that does not include high-mounted door bars and have a welded-in harness mount brace does not meet the NHRA or NMRA rules.\u003cbr\u003eRoll bars should have padding wherever any part of an occupant's body may come into contact with the steel tubing. This includes hands, feet, arms, and legs, not just the occupants' heads. \u003cbr\u003e\u003cbr\u003eSpecial-Order Option\u003cbr\u003eDiagonal Brace: Located in the plane of the main hoop, the welded-on diagonal brace greatly improves rollover protection and increases chassis rigidity. Made from 1-3\/4\" diameter by 0.134\" wall DOM tube.\u003cbr\u003eTo order a Diagonal Brace, select the \"Diagonal Brace Option\" before adding to your shopping cart: \u003cbr\u003e\u003cbr\u003eWe do not stock roll bars with the special-order options. Allow 2-4 weeks for manufacturing.","brand":"Maximum Motorsports","offers":[{"title":"Default Title","offer_id":48150150971650,"sku":"MM-Mm5RB-20","price":1337.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/getimage.ashx_26802ae3-8ffb-4f4f-a802-dcaa097e8a85.jpg?v=1785025513"},{"product_id":"maximum-motorsports-mm5rb-20-2-sport-4-point-mustang-roll-bar-no-door-bars-fixed-harness-mount-2005-2014-mustang-hardtop","title":"Maximum Motorsports Mm5RB-20.2 Sport 4-point Mustang Roll Bar, No Door Bars, Fixed Harness Mount (2005-2014 Mustang Hardtop) - MM5RB-20.2","description":"Sport 4-point Mustang roll bar, with fixed harness mount tube welded in place, for 2005-2014 Mustang coupes. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis Mustang Roll Bar:\u003c\/strong\u003e\u003cbr\u003e4-point\u003cbr\u003eNO door bars\u003cbr\u003eFixed harness mount tube\u003cbr\u003eDoes not fit Mustangs with the Glass Roof option because the headliner in those Mustangs is considerably lower and interferes with the main hoop.\u003cbr\u003e2013 Note: Ford changed the interior plastic of the 2013 model year hardtop Mustangs. While all of the MM roll bars fit the 2013 models, we have not yet updated the installation instructions to show the new procedure required to trim the interior plastic around the rear braces. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003cbr\u003eAny model roll bar that does not include high-mounted door bars and have a welded-in harness mount brace does not meet the NHRA or NMRA rules.\u003cbr\u003e\u003cbr\u003eRoll bars should have padding wherever any part of an occupant's body may come into contact with the steel tubing. This includes hands, feet, arms, and legs, not just the occupants' heads. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecial-Order Option\u003c\/strong\u003e\u003cbr\u003eDiagonal Brace: Located in the plane of the main hoop, the welded-on diagonal brace greatly improves rollover protection and increases chassis rigidity. Made from 1-3\/4\" diameter by 0.134\" wall DOM tube.\u003cbr\u003e\u003cbr\u003eTo order a Diagonal Brace, select the \"Diagonal Brace Option\" checkbox before adding to your shopping cart.\u003cbr\u003e\u003cbr\u003eWe do not stock roll bars with the special-order options. Allow 4-6 weeks for manufacturing.","brand":"Maximum Motorsports","offers":[{"title":"Default Title","offer_id":48150151004418,"sku":"MM-MM5RB-20.2","price":1137.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/getimage.ashx_7.jpg?v=1785025518"},{"product_id":"maximum-motorsports-mm5rb-20-3-sport-4-point-mustang-roll-bar-no-door-bars-removable-harness-mount-2005-2014-mustang-hardtop","title":"Maximum Motorsports Sport 4-point Mustang Roll Bar, No Door Bars, Removable Harness Mount (2005-2014 Mustang Hardtop) - Mm5RB-20.3","description":"Sport 4-point Mustang roll bar, with removable harness mount tube, for 2005-2014 Mustang coupes. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis Mustang Roll Bar:\u003c\/strong\u003e\u003cbr\u003e4-point\u003cbr\u003eNO door bars\u003cbr\u003eRemovable harness mount tube bolts in place\u003cbr\u003eDoes not fit Mustangs with the Glass Roof option because the headliner in those Mustangs is considerably lower and interferes with the main hoop.\u003cbr\u003e2013 Note: Ford changed the interior plastic of the 2013 model year hardtop Mustangs. While all of the MM roll bars fit the 2013 models, we have not yet updated the installation instructions to show the new procedure required to trim the interior plastic around the rear braces. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003cbr\u003eAny model roll bar that does not include high-mounted door bars and have a welded-in harness mount brace does not meet the NHRA or NMRA rules.\u003cbr\u003eRoll bars should have padding wherever any part of an occupant's body may come into contact with the steel tubing. This includes hands, feet, arms, and legs, not just the occupants' heads. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecial-Order Option\u003c\/strong\u003e\u003cbr\u003eDiagonal Brace: Located in the plane of the main hoop, the welded-on diagonal brace greatly improves rollover protection and increases chassis rigidity. Made from 1-3\/4\" diameter by 0.134\" wall DOM tube.\u003cbr\u003e\u003cbr\u003eTo order a Diagonal Brace, select the \"Diagonal Brace Option\" checkbox before adding to your shopping cart.\u003cbr\u003e\u003cbr\u003eWe do not stock roll bars with the special-order options. Allow 2-4 weeks for manufacturing.","brand":"Maximum Motorsports","offers":[{"title":"Default Title","offer_id":48150151069954,"sku":"MM-Mm5RB-20.3","price":1167.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/getimage.ashx_8.jpg?v=1785025517"},{"product_id":"maximum-motorsports-mm5rb-24-6-street-strip-6-point-mustang-roll-bar-e-z-remove-door-bars-no-harness-mount-2005-2014-mustang-hardtop","title":"Maximum Motorsports Street Strip 6-point Mustang Roll Bar, E-Z-Remove Door Bars, No Harness Mount (2005-2014 Mustang Hardtop) - Mm5RB-24.6","description":"Street and strip 6-point Mustang roll bar, with MM's exclusive easily-removable door bars, and no harness mount tube. Fits 2005-2014 Mustang coupe. \u003cbr\u003e\u003cbr\u003eNote the position when the door bar is removed\u003cbr\u003e\u003cbr\u003eThis Mustang Roll Bar:\u003cbr\u003e6-point\u003cbr\u003eE-Z-Remove door bars\u003cbr\u003eNO harness mount tube: You build your own\u003cbr\u003eDoes not fit Mustangs with the Glass Roof option because the headliner in those Mustangs is considerably lower and interferes with the main hoop.\u003cbr\u003e2013 Note: Ford changed the interior plastic of the 2013 model year hardtop Mustangs. While all of the MM roll bars fit the 2013 models, we have not yet updated the installation instructions to show the new procedure required to trim the interior plastic around the rear braces. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eEach E-Z-Remove door bar is held in place with two bolts. Remove them and the door bar is gone in seconds.No harness mount tube. Allows you to custom build exactly what you want for your Mustang.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e√Does NOT meet NHRA or NMRA rules for drag racing. Any model roll bar that does not include high-mounted door bars and have a welded-in harness mount brace does not meet the NHRA or NMRA rules.\u003cbr\u003e\u003cbr\u003eRoll bars should have padding wherever any part of an occupant's body may come into contact with the steel tubing. This includes hands, feet, arms, and legs, not just the occupants' heads. Click here for roll bar padding.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecial-Order Option\u003c\/strong\u003e\u003cbr\u003eDiagonal Brace: Located in the plane of the main hoop, the welded-on diagonal brace greatly improves rollover protection and increases chassis rigidity. Made from 1-3\/4\" diameter by 0.134\" wall DOM tube. Note that the diagonal brace is not removable.To order a Diagonal Brace, select the \"Diagonal Brace Option\" checkbox before adding to your shopping cart.\u003cbr\u003e\u003cbr\u003eWe do not stock roll bars with the special-order options. Allow 2-4 weeks for manufacturing.\u003cbr\u003e\u003cbr\u003e","brand":"Maximum Motorsports","offers":[{"title":"Default Title","offer_id":48150151102722,"sku":"MM-Mm5RB-24.6","price":1387.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/getimage.ashx_6.jpg?v=1785025513"},{"product_id":"maximum-motorsports-mm5rb-20-6-street-strip-6-point-mustang-roll-bar-standard-door-bars-no-harness-mount-2005-2014-mustang-hardtop","title":"Maximum Motorsports Street Strip 6-point Mustang Roll Bar, Standard Door Bars, No Harness Mount (2005-2014 Mustang Hardtop) - Mm5RB-20.6","description":"Street and Strip 6-point Mustang roll bar, with standard door bars, no harness mount tube, for 2005-2014 Mustang coupes. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis Mustang Roll Bar:\u003c\/strong\u003e\u003cbr\u003e6-point\u003cbr\u003eStandard door bars\u003cbr\u003eNO harness mount tube: You build your own\u003cbr\u003eDoes not fit Mustangs with the Glass Roof option because the headliner in those Mustangs is considerably lower and interferes with the main hoop.\u003cbr\u003e2013 Note: Ford changed the interior plastic of the 2013 model year hardtop Mustangs. While all of the MM roll bars fit the 2013 models, we have not yet updated the installation instructions to show the new procedure required to trim the interior plastic around the rear braces. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eE-Z-Remove door bars are now available.\u003c\/strong\u003e\u003cbr\u003eThe E-Z-Remove door bars are easily removed from your Mustang. Simply remove two bolts and the door bar is gone in seconds. The Mm5RB-24.6 is the version with these door bars.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003cbr\u003eNo harness mount tube. Allows you to custom build exactly what you want for your Mustang.\u003cbr\u003eDoes NOT meet NHRA or NMRA rules for drag racing. Any model roll bar that does not include high-mounted door bars and have a welded-in harness mount brace does not meet the NHRA or NMRA rules.\u003cbr\u003eWe do not stock this roll bar. Allow 2-4 weeks for manufacturing.\u003cbr\u003eRoll bars should have padding wherever any part of an occupant's body may come into contact with the steel tubing. This includes hands, feet, arms, and legs, not just the occupants' heads. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecial-Order Option\u003c\/strong\u003e\u003cbr\u003eDiagonal Brace: Located in the plane of the main hoop, the welded-on diagonal brace greatly improves rollover protection and increases chassis rigidity. Made from 1-3\/4\" diameter by 0.134\" wall DOM tube. Note that the diagonal brace is not removable.To order a Diagonal Brace, select the \"Diagonal Brace Option\" checkbox before adding to your shopping cart: Click here to read about the diagonal brace.\u003cbr\u003e\u003cbr\u003eWe do not stock roll bars with the special-order options. Allow 2-4 weeks for manufacturing.","brand":"Maximum Motorsports","offers":[{"title":"Default Title","offer_id":48150151135490,"sku":"MM-Mm5RB-20.6","price":1287.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/getimage.ashx_5.jpg?v=1785025516"},{"product_id":"maximum-motorsports-mm5rb-24-drag-race-6-point-mustang-roll-bar-e-z-remove-door-bars-fixed-harness-mount-2005-2014-mustang-hardtop","title":"Maximum Motorsports Drag Race 6-point Mustang Roll Bar, E-Z-Remove Door Bars, Fixed Harness Mount, (2005-2014 Mustang Hardtop) - Mm5RB-24","description":"Drag race 6-point Mustang roll bar, with MM's exclusive easily-removable door bars, and a fixed harness mount tube welded in place. Fits 2005-2014 Mustang coupe. \u003cbr\u003e\u003cbr\u003eNote the position when the door bar is removed\u003cbr\u003e\u003cbr\u003eThis Mustang Roll Bar:\u003cbr\u003e6-point\u003cbr\u003eE-Z-Remove door bars\u003cbr\u003eFixed harness mount tube\u003cbr\u003eMeets NHRA and NMRA rules for drag racing\u003cbr\u003eDoes not fit Mustangs with the Glass Roof option because the headliner in those Mustangs is considerably lower and interferes with the main hoop.\u003cbr\u003e2013 Note: Ford changed the interior plastic of the 2013 model year hardtop Mustangs. While all of the MM roll bars fit the 2013 models, we have not yet updated the installation instructions to show the new procedure required to trim the interior plastic around the rear braces. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eEach E-Z-Remove door bar is held in place with two bolts. Remove them and the door bar is gone in seconds.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003cbr\u003eAny model roll bar that does not include high-mounted door bars and have a welded-in harness mount brace does not meet the NHRA or NMRA rules.\u003cbr\u003e\u003cbr\u003eRoll bars should have padding wherever any part of an occupant's body may come into contact with the steel tubing. This includes hands, feet, arms, and legs, not just the occupants' heads.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecial-Order Option\u003c\/strong\u003e\u003cbr\u003eDiagonal Brace: Located in the plane of the main hoop, the welded-on diagonal brace greatly improves rollover protection and increases chassis rigidity. Made from 1-3\/4\" diameter by 0.134\" wall DOM tube.\u003cbr\u003e\u003cbr\u003eTo order a Diagonal Brace, select the \"Diagonal Brace Option\" checkbox before adding to your shopping cart:\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eWe do not stock roll bars with the special-order options. Allow 2-4 weeks for manufacturing.\u003cbr\u003e","brand":"Maximum Motorsports","offers":[{"title":"Default Title","offer_id":48150151201026,"sku":"MM-Mm5RB-24","price":1437.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/getimage.ashx_2_4ab22195-1171-48a1-abe6-2ddda131f105.jpg?v=1785025510"},{"product_id":"maximum-motorsports-mm5rb-20-1-street-4-point-mustang-roll-bar-no-door-bars-no-harness-mount-2005-2014-mustang-hardtop","title":"Maximum Motorsports Street 4-point Mustang Roll Bar, No Door Bars, No Harness Mount (2005-2014 Mustang Hardtop) - Mm5RB-20.1","description":"Street 4-point Mustang roll bar, without door bars, without harness mount tube, for 2005-2014 Mustang coupes. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis Mustang Roll Bar:\u003c\/strong\u003e\u003cbr\u003e4-point\u003cbr\u003eNO door bars\u003cbr\u003eNO harness mount tube\u003cbr\u003eDoes not fit Mustangs with the Glass Roof option because the headliner in those Mustangs is considerably lower and interferes with the main hoop.\u003cbr\u003e2013 Note: Ford changed the interior plastic of the 2013 model year hardtop Mustangs. While all of the MM roll bars fit the 2013 models, we have not yet updated the installation instructions to show the new procedure required to trim the interior plastic around the rear braces. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003cbr\u003eAny model roll bar that does not include high-mounted door bars and have a welded-in harness mount brace does not meet the NHRA or NMRA rules.\u003cbr\u003e\u003cbr\u003eRoll bars should have padding wherever any part of an occupant's body may come into contact with the steel tubing. This includes hands, feet, arms, and legs, not just the occupants' heads. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecial-Order Option\u003c\/strong\u003e\u003cbr\u003eDiagonal Brace: Located in the plane of the main hoop, the welded-on diagonal brace greatly improves rollover protection and increases chassis rigidity. Made from 1-3\/4\" diameter by 0.134\" wall DOM tube.\u003cbr\u003e\u003cbr\u003eTo order a Diagonal Brace, select the \"Diagonal Brace Option\" checkbox before adding to your shopping cart.\u003cbr\u003e\u003cbr\u003eWe do not stock roll bars with the special-order options. Allow 2-4 weeks for manufacturing.","brand":"Maximum Motorsports","offers":[{"title":"Default Title","offer_id":48150151266562,"sku":"MM-Mm5RB-20.1","price":1087.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/getimage.ashx_9.jpg?v=1785025518"},{"product_id":"maximum-motorsports-mm5rbo-2-e-z-remove-door-bar-upgrade-kit-2005-2014-mustang-hardtop","title":"Maximum Motorsports E-Z-Remove Door Bar Upgrade Kit (2005-2014 Mustang Hardtop) - Mm5RBO-2","description":"Kit to install easily-removable door bars in place of the standard door bars originally fitted to MM 6-point roll bars. MM's E-Z-Remove door bars can be detached and removed in moments.\u003cbr\u003e\u003cbr\u003eFits these previously installed MM 6-point roll bars:\u003cbr\u003eMm5RB-20\u003cbr\u003eMm5RB-20.5\u003cbr\u003eMm5RB-20.6\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBenefits\u003c\/strong\u003e\u003cbr\u003eThe standard door bars of the MM 6-point roll bars can be difficult and time-consuming to remove and reinstall. When removed, bolt holes in the floor are exposed.\u003cbr\u003e\u003cbr\u003eAfter upgrading to the E-Z-Remove door bars, both door bars can be easily removed in just a couple of minutes, and there are no holes left exposed in the floor.\u003cbr\u003e\u003cbr\u003eLeave the E-Z-Remove door bars out for daily driving.\u003cbr\u003e\u003cbr\u003eWhen heading to the strip, reinstall them in moments.\u003cbr\u003e\u003cbr\u003eMeets the NHRA and NMRA rules for removable door bars.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis kit includes:\u003c\/strong\u003e\u003cbr\u003e(2) E-Z-Remove door bars\u003cbr\u003e(2) floor mounts unique to the E-Z-Remove door bars\u003cbr\u003eAll hardware required\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003cbr\u003eE-Z-Remove door bars are available on new roll bars: Mm5RB-24, Mm5RB-24.5, Mm5RB-24.6\u003cbr\u003eTo add E-Z-Remove door bars to your 4-point roll bar use Mm5RBO-3.\u003cbr\u003eRead the Mm5RBO-2 door bar installation instructions before purchasing.\u003cbr\u003e","brand":"Maximum Motorsports","offers":[{"title":"Default Title","offer_id":48150151397634,"sku":"MM-Mm5RBO-2","price":267.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/getimage-2.ashx.jpg?v=1785025520"},{"product_id":"bmr-k-member-premium-version-with-spring-perches-1996-2004-mustang-km743","title":"BMR K-Member Premium Version with Spring Perches (1996-2004 Mustang) - KM743","description":"\u003cp\u003e\u003cbr\u003e\u003cbr\u003efits 96 - 04 Mustang and will also work for coyote swaps with mod motor mount kit. Factory K-Member weighs in at roughly 50LBS, where this unit comes in at 20.5LBS.\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":48150168633602,"sku":"BMR-KM743","price":529.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/km743_image1_small_446bd73e-92d9-4fee-958e-ba08b5e35bf3.jpg?v=1785025659"},{"product_id":"upr-products-ls-swap-chrome-moly-k-member-kit-1979-2004-mustang-2005-96k-106","title":"UPR Products LS Swap Chrome Moly K Member Kit (1979-2004 Mustang) - 2005-96K-106","description":"\u003cp\u003eUPR's all new complete LS Swap Chrome Moly K-member Kit - will save more weight and exceed any strength limitations of mild steel while allowing maximum header and oil pan clearance. This kit was designed for the abuse of hardcore drag race, road race, and Street Enthusiasts. Most importantly it will handle the everyday wear and tear of city \u0026amp; highway streets like that was it's main intent. Includes LS swap adapter plates that allow you to bolt them to any standard LS, 5.3L, 6.0L block and then bolt a 4.6 Mustang Motor Mount to it and use UPRs 4.6 Chrome Moly K-member. This is the Lightest and Strongest package on the Market for LS Mustang swaps. Clears Ultimate Headers Fox Body Swap (Part UH-102601) Longtube headers in 94-04 cars. Includes UPR Coil Over Kit with exclusive designed adjuster nut with new set screw to ensure it never looses it's setting! Also requires no tools to adjust ride height. UPR Recommends the purchase of a bump steer kit with this product. Caster Camber plates are required due to the added stress on the strut tower.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAll of our Suspension Products are made with the Highest Quality materials and most expensive components. We spare no expense on our products and always stand behind them with our Lifetime warranty that no one else offers.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e» Does NOT Alter Wheelbase\u003c\/p\u003e\n\u003cp\u003e» Silver Powder Coated Finish\u003c\/p\u003e\n\u003cp\u003e» Thicker 1\/4\" Motor Mount Pads\u003c\/p\u003e\n\u003cp\u003e» Tig Welded in Billet fixtures\u003c\/p\u003e\n\u003cp\u003e» 4130 Seamless Chrome Moly Tubing\u003c\/p\u003e\n\u003cp\u003e» Save 70lbs over stock K-member \u0026amp; A arms\u003c\/p\u003e\n\u003cp\u003e» All Welding \u0026amp; Materials Made in the USA!\u003c\/p\u003e\n\u003cp\u003e» Lightest and Strongest LS1 Mustang Swap K-member\u003c\/p\u003e\n\u003cp\u003e» Includes LS1 Adapter Plate and 4.6 Solid Motor Mounts or upgrade to Non-Adjustable or Adjustable Urethane Motor Mounts\u003c\/p\u003e\n\u003cp\u003e» Now includes Rack Bolts \u0026amp; Offset or Standard Rack Bushings\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003eInstalls in 3-6 hours.\u003c\/p\u003e\n\u003cp\u003e1 - Chrome Moly Tubular K-member Silver Powder Coated\u003c\/p\u003e\n\u003cp\u003e2 - Chrome Moly Tubular A-arms Silver Powder Coated\u003c\/p\u003e\n\u003cp\u003e1 - LS1 Adapter Plate Kit.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e1 - 4.6 Solid Motor Mount Kit. If using after market motor mounts the locating tab may have to be trimmed. Must re-use factory hardware.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 LX GT GTS Mustang Cobra\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade In USA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"UPR","offers":[{"title":"Default Title","offer_id":48150633218306,"sku":"UPR-2005-96K-106","price":1024.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/2005-96k-108.jpg?v=1785028265"},{"product_id":"upr-products-5-0l-coyote-swap-tubular-chrome-moly-k-member-1979-2004-mustang-2005-79-mod-50","title":"UPR Products 5.0L Coyote Swap Tubular Chrome Moly K-Member (1979-2004 Mustang) - 2005-79-MOD-50","description":"\u003cdiv\u003e  Install a Coyote 5.0L or Modular 4.6L or 5.4L into your Fox Body Mustang! UPR's all new Chrome Moly K-member - will save more weight and exceed any strength limitations of mild steel while allowing maximum header and oil pan clearance. Designed for the abuse of hardcore drag race, road race, and Street Enthusiasts. Most importantly it will handle the everyday wear and tear of city \u0026amp; highway streets like that was it's main intent.  This K-member allows for the use of a Ford Modular 4.6L\/5.4L into a fox body Mustang and Coyote 5.0L As seen here with the use of 96-04 4.6 urethane or solid motor mounts. All of our Suspension Products are made with the Highest Quality materials and most expensive components. We spare no expense on our products and always stand behind them with our Lifetime warranty that no one else offers.\u003c\/div\u003e\n\u003cdiv\u003eInstalls in 3-6 hours.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eIf using after market motor mounts the locating tab may have to be trimmed. Must re-use factory hardware.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eOptional Parts:\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eHardware Kit Standard: Grade 10.9 hardware kit includes (4) A-Arm bolts, (8) A-Arm washers, (4) A-Arm nylock nuts, (4) K-member main bolts, (4) K-member main washers, (4) K-member rear pad bolts, (4) K-member rear pad washers.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eHardware Kit Master: Grade 10.9 hardware kit includes (4) A-Arm bolts, (8) A-Arm washers, (4) A-Arm nylock nuts, (4) K-member main bolts, (4) K-member main washers, (4) K-member OEM style J-nuts, (4) K-member rear pad bolts, (4) K-member rear pad washers (2) K-member rear aluminum retaining nut\/blocks.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eMotor Mount Shims: 6061 Aluminum Motor Mount shims to space the engine up for additional oil pan clearance, available in 1\/4\" or 3\/8\" thick.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eProduct Features:\u003c\/div\u003e\n\u003cdiv\u003e» Does NOT Alter Wheelbase\u003c\/div\u003e\n\u003cdiv\u003e» Silver Powder Coated Finish\u003c\/div\u003e\n\u003cdiv\u003e» Thicker 1\/4\" Motor Mount Pads\u003c\/div\u003e\n\u003cdiv\u003e» Tig Welded in Billet fixtures\u003c\/div\u003e\n\u003cdiv\u003e» 4130 Seamless Chrome Moly Tubing\u003c\/div\u003e\n\u003cdiv\u003e» Lighter and Stronger than Mild Steel\u003c\/div\u003e\n\u003cdiv\u003e» Saves 37lbs over the factory K-member\u003c\/div\u003e\n\u003cdiv\u003e» All Welding \u0026amp; Materials Made in the USA!\u003c\/div\u003e\n\u003cdiv\u003e» Now includes Rack Bolts \u0026amp; Offset or Standard Rack Bushings\u003c\/div\u003e\n\u003cdiv\u003e» Can be used with UPR Non-Adjustable, Adjustable A Arms or Factory A Arms by adding 2005-SP2 Spring perches.\u003c\/div\u003e\n\u003cdiv\u003e* DOES NOT WORK WITH ANY OTHER BRAND AFTERMARKET TUBULAR A ARMS\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eFits These Vehicles: \u003c\/div\u003e\n\u003cdiv\u003e1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 LX GT GTS Bullitt Mach 1 Mustang Cobra Roush Saleen \u0026amp; Vehicles.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eWill also bolt into a 96-04 Ford Mustang for use with a Windsor based engine.\u003c\/div\u003e\n\u003cdiv\u003eMade in the USA!\u003c\/div\u003e","brand":"UPR","offers":[{"title":"Default Title","offer_id":48150695084290,"sku":"UPR-2005-79-MOD-50","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/yhst-37354654005614_2268_157784109__80680.1511302186.1280.1280.gif?v=1785028726"},{"product_id":"upr-chrome-moly-k-member-ls-swap-1979-2004-mustang-2005-79-ls-100","title":"UPR Chrome Moly K-Member LS Swap (1979-2004 Mustang) - 2005-79-LS-100","description":"\u003cdiv\u003eUPR's LS Swap Chrome Moly K-member will save more weight and exceed any strength limitations of mild steel while allowing maximum header and oil pan clearance. This kit was designed for the abuse of hardcore drag race, road race, and Street Enthusiasts. Most importantly it will handle the everyday wear and tear of city \u0026amp; highway streets like that was it's main intent. Includes LS swap adapter plates that allow you to bolt them to any standard LS, 5.3L, 6.0L block and then bolt your choice of 4.6 or LS  Mustang Motor Mount to it and use UPRs 4.6 Chrome Moly K-member. This is the Lightest and Strongest package on the Market for LS Mustang swaps. Clears Ultimate Headers Fox Body Swap (Part UH-102601) Longtube headers in 94-04 cars.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe base K-member comes with our Solid Steel LS style Motor Mounts that are slotted front to back allowing you to move the engine forward up to 5\/8\" away from firewall. These mounts have no dampening will add the most vibration and noise to your car, great for a drag focused car or high HP application. We offer the option for Non Adjustable Urethane Motor Mounts these offer more street friendly characteristics and are an upgrade from stock rubber motor mounts without adding any vibration and noise to the car but offer no adjustability. The best option is our Adjustable Urethane Motor Mounts which not only offers the street friendly characteristics of a urethane mount but the front to rear adjustability of the solid mount plus the adjustability of moving the engine up a 1\/2\" or down 1\/4\". The Adjustable Motor Mounts come in 2 durometers Street or Street\/Strip and allow you to replace the bushings at any time or upgrade as you increase power levels.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAll of our Suspension Products are made with the Highest Quality materials and most expensive components. We spare no expense on our products and always stand behind them with our Lifetime warranty that no one else offers.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eInstalls in 3-6 hours.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eOptional Parts:\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eHardware Kit Standard: Grade 10.9 hardware kit includes (4) A-Arm bolts, (8) A-Arm washers, (4) A-Arm nylock nuts, (4) K-member main bolts, (4) K-member main washers, (4) K-member rear pad bolts, (4) K-member rear pad washers.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eHardware Kit Master: Grade 10.9 hardware kit includes (4) A-Arm bolts, (8) A-Arm washers, (4) A-Arm nylock nuts, (4) K-member main bolts, (4) K-member main washers, (4) K-member OEM style J-nuts, (4) K-member rear pad bolts, (4) K-member rear pad washers (2) K-member rear aluminum retaining nut\/blocks. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e» Does NOT Alter Wheelbase\u003c\/div\u003e\n\u003cdiv\u003e» Silver Powder Coated Finish\u003c\/div\u003e\n\u003cdiv\u003e» Thicker 1\/4\" Motor Mount Pads\u003c\/div\u003e\n\u003cdiv\u003e» Tig Welded in Billet fixtures\u003c\/div\u003e\n\u003cdiv\u003e» 4130 Seamless Chrome Moly Tubing\u003c\/div\u003e\n\u003cdiv\u003e» Save 37lbs over stock K-member\u003c\/div\u003e\n\u003cdiv\u003e» All Welding \u0026amp; Materials Made in the USA!\u003c\/div\u003e\n\u003cdiv\u003e» Lightest and Strongest LS1 Mustang Swap K-member\u003c\/div\u003e\n\u003cdiv\u003e» Includes LS1 Adapter Plate and 4.6 Solid Motor Mounts or upgrade to Non-Adjustable or Adjustable Urethane Motor Mounts\u003c\/div\u003e\n\u003cdiv\u003e» Now includes Rack Bolts \u0026amp; Offset or Standard Rack Bushings\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e» Chrome Moly Tubular K-member Silver Powder Coated\u003c\/div\u003e\n\u003cdiv\u003e» LS1 Adapter Plate Kit.\u003c\/div\u003e\n\u003cdiv\u003e» 4.6 Solid Motor Mount Kit \u003c\/div\u003e\n\u003cdiv\u003e» Rack Bolts \u0026amp; Bushings\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eFits These Vehicles:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 LX GT GTS Mustang Cobra\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eMade in the USA!\u003c\/strong\u003e\u003c\/div\u003e","brand":"UPR","offers":[{"title":"Default Title","offer_id":48150695117058,"sku":"UPR-2005-79-LS-100","price":588.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/2005-79-ls-100__54524.1701699882.1280.1280.jpg?v=1785028722"},{"product_id":"upr-chrome-moly-tubular-k-member-no-motor-mounts-2011-2014-mustang-2005-11","title":"UPR Chrome Moly Tubular K-Member No Motor Mounts (2011-2014 Mustang) - 2005-11","description":"\u003cdiv\u003eUPR's all new 2005-2014 Mustang Chrome Moly K-member with No Motor Mounts - will save more weight and exceed any strength limitations of mild steel while allowing maximum header and oil pan clearance. This kit was designed for the abuse of hardcore drag race, road race, and Street Enthusiasts most importantly it will handle the everyday wear and tear of city \u0026amp; highway streets like that was it's main intent. For use with motor plates for engine mounting. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe factory K-member weighs in at 46lbs our Chrome Moly K-member only weighs 22lbs saving 24lbs off the nose of your car where it's needed most. Works with factory A arms and with factory electronic steering rack on 11-14 Mustangs.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eMade with 4130 seamless Chrome Moly tubing sourced in the USA for maximum weight savings and strength\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eInstalls in 3-5 hours. \u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eProduct Features:\u003c\/div\u003e\n\u003cdiv\u003e» Hardware Included\u003c\/div\u003e\n\u003cdiv\u003e» No Motor Mounts \u003c\/div\u003e\n\u003cdiv\u003e» Silver Powder Coated Finish\u003c\/div\u003e\n\u003cdiv\u003e» Tig Welded in Billet Fixtures\u003c\/div\u003e\n\u003cdiv\u003e» 4130 Seamless Chrome Moly Tubing\u003c\/div\u003e\n\u003cdiv\u003e» Lighter and Stronger than Mild Steel\u003c\/div\u003e\n\u003cdiv\u003e» Saves 24lbs over the factory K-member\u003c\/div\u003e\n\u003cdiv\u003e» All Welding \u0026amp; Materials Made in the USA!\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eFits These Vehicles:\u003c\/div\u003e\n\u003cdiv\u003e2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Mustang GT GT500 Boss 302, Bullitt S197 4.6 5.0 Coyote\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eMade in the USA!\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eQ \u0026amp; A\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eQuestion: Can I use stock motor mounts with this K-member?\u003c\/div\u003e\n\u003cdiv\u003eAnswer: No this version of our K-member do not have motor mounts or provisions for motor mounts. You must mount your engine with motor plates, which is typical in dedicated race cars or when swapping engines into your car. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eQuestion: Does this K-member move the tires forward or backward like others?\u003c\/div\u003e\n\u003cdiv\u003eAnswer: No it retains the factory wheelbase and places the wheels in the factory location.\u003c\/div\u003e","brand":"UPR","offers":[{"title":"Default Title","offer_id":48150699147522,"sku":"UPR-2005-11-NM","price":749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/2005-05-nm.jpg?v=1785028752"},{"product_id":"upr-chrome-moly-tubular-k-member-no-motor-mounts-2005-2010-mustang-2005-05-nm-1","title":"UPR Chrome Moly Tubular K-Member No Motor Mounts (2005-2010 Mustang) - 2005-05-NM","description":"\u003cdiv\u003eUPR's all new 2005-2014 Mustang Chrome Moly K-member with No Motor Mounts - will save more weight and exceed any strength limitations of mild steel while allowing maximum header and oil pan clearance. This kit was designed for the abuse of hardcore drag race, road race, and Street Enthusiasts most importantly it will handle the everyday wear and tear of city \u0026amp; highway streets like that was it's main intent. For use with motor plates for engine mounting. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe factory K-member weighs in at 46lbs our Chrome Moly K-member only weighs 22lbs saving 24lbs off the nose of your car where it's needed most. Works with factory A arms and with factory electronic steering rack on 11-14 Mustangs.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eMade with 4130 seamless Chrome Moly tubing sourced in the USA for maximum weight savings and strength\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eInstalls in 3-5 hours. \u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eProduct Features:\u003c\/div\u003e\n\u003cdiv\u003e» Hardware Included\u003c\/div\u003e\n\u003cdiv\u003e» No Motor Mounts \u003c\/div\u003e\n\u003cdiv\u003e» Silver Powder Coated Finish\u003c\/div\u003e\n\u003cdiv\u003e» Tig Welded in Billet Fixtures\u003c\/div\u003e\n\u003cdiv\u003e» 4130 Seamless Chrome Moly Tubing\u003c\/div\u003e\n\u003cdiv\u003e» Lighter and Stronger than Mild Steel\u003c\/div\u003e\n\u003cdiv\u003e» Saves 24lbs over the factory K-member\u003c\/div\u003e\n\u003cdiv\u003e» All Welding \u0026amp; Materials Made in the USA!\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eFits These Vehicles:\u003c\/div\u003e\n\u003cdiv\u003e2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Mustang GT GT500 Boss 302, Bullitt S197 4.6 5.0 Coyote\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eMade in the USA!\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eQ \u0026amp; A\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eQuestion: Can I use stock motor mounts with this K-member?\u003c\/div\u003e\n\u003cdiv\u003eAnswer: No this version of our K-member do not have motor mounts or provisions for motor mounts. You must mount your engine with motor plates, which is typical in dedicated race cars or when swapping engines into your car. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eQuestion: Does this K-member move the tires forward or backward like others?\u003c\/div\u003e\n\u003cdiv\u003eAnswer: No it retains the factory wheelbase and places the wheels in the factory location.\u003c\/div\u003e","brand":"UPR","offers":[{"title":"Default Title","offer_id":48150699245826,"sku":"UPR-2005-05-NM","price":749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/2005-05-nm_f51e5218-21c7-4477-96e8-7b4af327fdf6.jpg?v=1785028754"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/collections\/KM761_white_background_1.jpg?v=1781134730","url":"https:\/\/www.lethalperformance.com\/collections\/k-members.oembed","provider":"Lethal Performance","version":"1.0","type":"link"}