{"title":"DivisionX","description":"\u003ch1\u003edivisionx\u003c\/h1\u003e","products":[{"product_id":"divisonx-wiring-pigtail-6-pin","title":"DivisionX 6 Pin Wiring Pigtail","description":"\u003cp\u003eThe DivisionX 6 Pin Wiring Pigtail makes installation of the new Gen 3 DX fuel hats a breeze. This 6 pin connector adapts to the 6 pin connector on the fuel hat and comes with 10 inches of wire for each power and ground for the pumps and level sender.\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":47954727895298,"sku":"DX-0045","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/dx-0075.jpg?v=1784983472"},{"product_id":"divisionx-gt500-high-flow-billet-aluminum-fuel-rails-clear","title":"DivisionX GT500 High Flow Billet Aluminum Fuel Rails (Clear)","description":"\u003cp\u003e\u003cstrong\u003eDivisionX GT500 High Flow Billet Aluminum Fuel Rails\u003c\/strong\u003eAll new from DivisionX are their high flow billet aluminum fuel rails for the 2007-2014 Shelby GT500. The DX rails are made of high grade billet aluminum and CNC machined to perfection. Once machined the rails are sent off to be anodized for a long lasting protective finish. The DX rails use -8an O-ring fittings on each end and have (2) 1\/8\" NPT ports located on the passenger side rail so you can install electric and mechanical fuel pressure gauges as well as use it for the fuel supply on a wet nitrous setup.The DivisionX fuel rails fit all 07-14 GT500's using the stock Eaton, TVS, Whipple 2.9L, 3.4L and 4.0L as well as the Kenne Bell 2.8 and 3.6L.\u003cstrong\u003eFuel Rail Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"disc\"\u003e\n\u003cli\u003eCNC Machined High Grade Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eAnodized For Long Lasting Protective Finish\u003c\/li\u003e\n\u003cli\u003eMachined In Mounting Tabs designed to prevent tab failure found with other manufacturers fuel rails\u003c\/li\u003e\n\u003cli\u003e(2) Built-in 1\/8\" NPT Ports for electric or mechanical fuel pressure gauges or for fuel supply when using a wet nitrous kit.\u003c\/li\u003e\n\u003cli\u003eIncludes Driver and Passenger Side Fuel Rail\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum mounting plate for FRPS with Viton O-ring\u003c\/li\u003e\n\u003cli\u003eStainless Steel Mounting Hardware Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003eDue to clearance issues between the fuel rail and supercharger plenum on the 2.9L\/3.4L Whipple and 2.8L KB only stock height EV14 injectors can be used. Taller EV6\/EV1 height injectors will not fit. Also, due to the location of the EGR valve on the 2.9L access on the passenger side rear fuel rail is limited to a -8an plug only. The only way to use a different fitting there would be to delete the EGR valve.\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":47954740445442,"sku":"DX-0712500-C","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/gt500rails_clear.jpg?v=1784983480"},{"product_id":"divisionx-gt500-high-flow-billet-aluminum-fuel-rails-black","title":"DivisionX GT500 High Flow Billet Aluminum Fuel Rails (Black)","description":"\u003cp\u003e\u003cstrong\u003eDivisionX GT500 High Flow Billet Aluminum Fuel Rails\u003c\/strong\u003eAll new from DivisionX are their high flow billet aluminum fuel rails for the 2007-2014 Shelby GT500. The DX rails are made of high grade billet aluminum and CNC machined to perfection. Once machined the rails are sent off to be anodized for a long lasting protective finish. The DX rails use -8an O-ring fittings on each end and have (2) 1\/8\" NPT ports located on the passenger side rail so you can install electric and mechanical fuel pressure gauges as well as use it for the fuel supply on a wet nitrous setup.The DivisionX fuel rails fit all 07-14 GT500's using the stock Eaton, TVS, Whipple 2.9L, 3.4L and 4.0L as well as the Kenne Bell 2.8 and 3.6L.\u003cstrong\u003eFuel Rail Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"disc\"\u003e\n\u003cli\u003eCNC Machined High Grade Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eAnodized For Long Lasting Protective Finish\u003c\/li\u003e\n\u003cli\u003eMachined In Mounting Tabs designed to prevent tab failure found with other manufacturers fuel rails\u003c\/li\u003e\n\u003cli\u003e(2) Built-in 1\/8\" NPT Ports for electric or mechanical fuel pressure gauges or for fuel supply when using a wet nitrous kit.\u003c\/li\u003e\n\u003cli\u003eIncludes Driver and Passenger Side Fuel Rail\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum mounting plate for FRPS with Viton O-ring\u003c\/li\u003e\n\u003cli\u003eStainless Steel Mounting Hardware Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003eDue to clearance issues between the fuel rail and supercharger plenum on the 2.9L\/3.4L Whipple and 2.8L KB only stock height EV14 injectors can be used. Taller EV6\/EV1 height injectors will not fit. Also, due to the location of the EGR valve on the 2.9L access on the passenger side rear fuel rail is limited to a -8an plug only. The only way to use a different fitting there would be to delete the EGR valve.\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":47954740576514,"sku":"DX-0712500-B","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/gt500rails_black_1.jpg?v=1784983477"},{"product_id":"divisionx-gen-3-99-04-mustang-dual-pump-return-style-fuel-hat-manifold-cobra-gt-mach-1","title":"DivisionX GEN 4 99-04 Mustang Dual Pump Return Style Fuel Hat Manifold (Cobra \/ GT \/ Mach-1)","description":"\u003cdiv class=\"video-container\"\u003e\u003ciframe frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/hSAWus2trZ4\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eDivisionX GEN 4 99-04 Mustang Dual Pump Return Style Fuel Hat Manifold\u003c\/strong\u003e\u003cbr\u003e- Fully Upgradable with multiple different fuel pump options (see options above)\u003cbr\u003e- Supports up to 2000hp when using dual F9000285 485lph DCSS Walbro Pumps\u003cbr\u003e- Plug-and-Play OEM Connectivity- Uses OEM connectors for simple plug and play installation\u003cbr\u003e- Guaranteed Leak Free Design\u003cbr\u003e- Hoseless Connections Between the Pump and Fuel Hat\u003cbr\u003e- Deletes the restrictive PPRV valve found in the stock fuel pump assembly\u003cbr\u003e- Hard Anodized- Compatible with gasoline, race fuels and ethanol\u003cbr\u003e- Multiple Fuel Pump Options- Compatible with most pumps accepting the Delphi style connector: F90000267,F90000274, F90000285 and F90000295\u003cbr\u003e- Viton O-rings Standard on all fuel hats\u003cbr\u003e- O-Ring Fittings for feed and return ports- No more messy teflon paste and hard to work with NPT fittings. (Allows you to change feed or return size easily)\u003cbr\u003e- Optional 6 Pin Connector Pigtail for those using their own return style wiring\u003cbr\u003e\u003cbr\u003eThe SN95 dual pump return style fuel hat can house (2) Walbro F90000267,F90000274, F90000285 and F90000295. It has a return port built into it so there's no modification necessary to your stock tank. This assembly is a direct replacement for your stock fuel pump setup and bolts right in. It's got a single -10an feed and a -8an return port. All of the DivisionX hats are hard anodized in black for extra protection are are fully compatible with regular gasoline as well as E85. \u003cbr\u003e\u003cbr\u003e-O-Ring Style Fittings for Feed and Return (No More Teflon Paste Needed\u003cbr\u003e-NEW BIG Bore feed and return path for optimal flow.\u003cbr\u003e-Oversize pump retainer for (2) Walbro F90000267,F90000274, F90000285 and F90000295\u003cbr\u003e-Direct replacement for your stock fuel pump assembly. Bolts right in using an OEM gasket for a perfect seal as well as it uses the OEM 03-04 cobra fuel sending unit in the same stock location.\u003cbr\u003e-Eliminates the PPRV \u003cbr\u003e- Hoseless Connection Between Pumps and Fuel Hat\u003cbr\u003e-OEM Style Connector passes current through the hat- No more wires to solder- Guaranteed Leak Free\u003cbr\u003e-No welding or caulk used in assembly or manufacturing. Full billet components use o-rings, OEM seals, and gas blocked through conductors.\u003cbr\u003e-Hard Anodized in a deep black finish for extra protection\u003cbr\u003e-Viton O-Rings\/Compatible with E85\u003cbr\u003e-Hardware and installation instructions included\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe DivisionX fuel hat manifold includes:\u003c\/strong\u003e\u003cbr\u003eBillet Dual Pump Fuel Hat\u003cbr\u003eOEM 6 Pin Connector Guarantees No Leaks - No Soldering of Wires Necessary\u003cbr\u003eHoseless Connection Between the Fuel Pumps and Hat\u003cbr\u003eAll XRP an Fittings\u003cbr\u003eNew Bolts for mounting the assembly to the fuel tank\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: Uses the factory 2003-2004 Cobra level sender or you can use any 99-04 GT, 03-04 Mach-1 or 99-01 Cobra level sender with the purchase of the SN95 level sender adapter bracket. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor more info, check out our full write-up \u003ca href=\"https:\/\/www.lethalperformance.com\/info\/fuel-system\" target=\"_blank\"\u003eHERE!\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":47954750800130,"sku":"DX-SN016","price":449.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/new_sn95_fuel_hat-2_1.jpg?v=1785025036"},{"product_id":"divisionx-dx-0711-mustang-triple-pump-fuel-hat-manifold-2011-2023-gt-gt350-2013-2014-shelby-gt500-2015-2023-ecoboost-2020-2022-shelby-gt500","title":"DivisionX DX-0711 Mustang Triple Pump Fuel Hat Manifold (2011-2023 GT \/ GT350 \/ 2013-2014 Shelby GT500 \/ 2015-2023 Ecoboost \/ 2020-2022 Shelby GT500)","description":"\u003cdiv class=\"video-container\"\u003e\u003ciframe frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/O3QTmigSQ3Y\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003eThe DivisionX DX-0711 Triple Pump Fuel Hat Manifold is the ultimate solution for all fueling needs, designed to take up to three 400lph, 465Lph, 485lph, 535lph pumps. The design was also intended to be plug and play, easy to install and reliable with many features to make the transition easier and have you on your way to meeting your power goals.\u003c\/p\u003e\n\u003cp\u003eThe DivisionX Triple Pump Fuel Hat Manifold is the ultimate in upgrades for the fueling system. Accommodating those wanting to run two pumps for a bump in power, to those targeting 1200hp with ethanol – this setup is the all in one solution.\u003c\/p\u003e\n\u003cp\u003eThe design of the fuel system supports up to three 400lph, 465Lph, 485lph, 535lph fuel pumps, delivering more fuel than the more standard 255lph pumps. The pumps are secured with O-rings for optimal height and to isolate vibrations from the aluminum body of the system.\u003c\/p\u003e\n\u003cp\u003eTo cut the cost of upgrading, simplify the amount of parts and eliminate additional plumbing to reduce leaks we have integrated the merge for the three fuel pumps in the hat itself. Ease of installation is always a big concern for our customers and DivisionX is striving to deliver in this department.\u003c\/p\u003e\n\u003cp\u003eAny fuel coming back through the return line is fed down through a ½” stainless steel tube to the bottom of the tank. This helps eliminate aeration of the fuel, providing a more consistent pickup. To further reduce aeration a side port has been incorporated, channeling fuel away from the pump pickup. The supplied O-ring plug blocks off one direction or the other.\u003c\/p\u003e\n\u003cp\u003eReverse engineering using a CMM arm, modeling OE components and with precision CNC manufacturing we are able to make the DivisionX Triple Pump Fuel Hat Manifold as plug and play as possible. We utilize the factory siphon system to extract fuel from the other side of the fuel tank. Necessary features have been CNC milled to mimic OEM design to accommodate the factory level sender, placing it in the exactly the same position as OEM.\u003c\/p\u003e\n\u003cp\u003eThe wiring harness is isolated and sealed from the fuel tank with a proprietary Delrin wire seal. Delrin has one of the highest resistances to fuels of any plastic, so it was chosen to provide a lifetime of trouble free operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCAD\/CAM\/CMM Engineered and manufactured\u003c\/li\u003e\n\u003cli\u003e6061 CNC Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eUp to 3 x 465Lph or 3 x 255Lph pumps, mounted vertically\u003c\/li\u003e\n\u003cli\u003eCompatible with Walbro GSS342, F90000262, F90000267, F90000274, F90000285, F90000295 and Aeromotive 11542 Fuel Pumps\u003c\/li\u003e\n\u003cli\u003eIntegrated merge from all pumps – No need for additional y-block, plumbing\u003c\/li\u003e\n\u003cli\u003eUses OEM siphon\u003c\/li\u003e\n\u003cli\u003e-10 AN Female O Ring Feed\u003c\/li\u003e\n\u003cli\u003e-8 AN Female O Ring Return\u003c\/li\u003e\n\u003cli\u003eLow profile fitment\u003c\/li\u003e\n\u003cli\u003eIntegrated attachment for OEM fuel level sender\u003c\/li\u003e\n\u003cli\u003eHermetically sealed wires with o-ring\u003c\/li\u003e\n\u003cli\u003eHardware, filters, fuel lines, clamps and etc. included to accommodate various configurations\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":47954750898434,"sku":"DX-0711","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/division_x_hat_3.png?v=1785025038"},{"product_id":"divisionx-dx-0711-wp-mustang-triple-pump-fuel-hat-manifold-with-pumps-2011-2023-mustang-gt-2012-2013-boss-302-2015-2020-gt350-2015-2023-ecoboost-2020-2022-shelby-gt500","title":"DivisionX DX-0711-WP Mustang Triple Pump Fuel Hat Manifold with Pumps (2011-2023 Mustang GT \/ 2012-2013 Boss 302 \/ 2015-2020 GT350 \/ 2015-2023 Ecoboost \/ 2020-2022 Shelby GT500)","description":"\u003cdiv class=\"video-container\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/O3QTmigSQ3Y\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003cp\u003eThe DivisionX Triple Pump Fuel Hat Manifold is the ultimate solution for all fueling needs, designed to take up to three 400lph, 465Lph, 485lph, 535lph pumps. The design was also intended to be plug and play, easy to install and reliable with many features to make the transition easier and have you on your way to meeting your power goals.\u003c\/p\u003e\u003cp\u003eThe DivisionX Triple Pump Fuel Hat Manifold is the ultimate in upgrades for the fueling system. Accommodating those wanting to run two pumps for a bump in power, to those targeting 1200hp with ethanol – this setup is the all in one solution.\u003c\/p\u003e\u003cp\u003eThe design of the fuel system supports up to three 400lph, 465Lph, 485lph, 535lph fuel pumps, delivering more fuel than the more standard 255lph pumps. The pumps are secured with O-rings for optimal height and to isolate vibrations from the aluminum body of the system.\u003c\/p\u003e\u003cp\u003eTo cut the cost of upgrading, simplify the amount of parts and eliminate additional plumbing to reduce leaks we have integrated the merge for the three fuel pumps in the hat itself. Ease of installation is always a big concern for our customers and DivisionX is striving to deliver in this department.\u003c\/p\u003e\u003cp\u003eAny fuel coming back through the return line is fed down through a ½” stainless steel tube to the bottom of the tank. This helps eliminate aeration of the fuel, providing a more consistent pickup. To further reduce aeration a side port has been incorporated, channeling fuel away from the pump pickup. The supplied O-ring plug blocks off one direction or the other.\u003c\/p\u003e\u003cp\u003eReverse engineering using a CMM arm, modeling OE components and with precision CNC manufacturing we are able to make the DivisionX Triple Pump Fuel Hat Manifold as plug and play as possible. We utilize the factory siphon system to extract fuel from the other side of the fuel tank. Necessary features have been CNC milled to mimic OEM design to accommodate the factory level sender, placing it in the exactly the same position as OEM.\u003c\/p\u003e\u003cp\u003eThe wiring harness is isolated and sealed from the fuel tank with a proprietary Delrin wire seal. Delrin has one of the highest resistances to fuels of any plastic, so it was chosen to provide a lifetime of trouble free operation.\u003c\/p\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003cbr\u003e\u003cli\u003eCAD\/CAM\/CMM Engineered and manufactured\u003c\/li\u003e\u003cli\u003e6061 CNC Billet Aluminum\u003c\/li\u003e\u003cli\u003eUp to 3 x 400lph\/ 465lph \/ 485lph \/ 535lph or 3 x 255Lph pumps, mounted vertically\u003c\/li\u003e\u003cli\u003eIntegrated merge from all pumps – No need for additional y-block, plumbing\u003c\/li\u003e\u003cli\u003eUses OEM siphon\u003c\/li\u003e\u003cli\u003e-10 AN Female O Ring Feed\u003c\/li\u003e\u003cli\u003e-8 AN Female O Ring Return\u003c\/li\u003e\u003cli\u003eLow profile fitment\u003c\/li\u003e\u003cli\u003eIntegrated attachment for OEM fuel level sender\u003c\/li\u003e\u003cli\u003eHermetically sealed wires with o-ring\u003c\/li\u003e\u003cli\u003eHardware, filters, fuel lines, clamps and etc. included to accommodate various configurations\u003c\/li\u003e\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":47954750931202,"sku":"DX-0711-WP","price":629.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/s197hat_w_pumps.jpg?v=1785025038"},{"product_id":"divisionx-2007-2014-gt500-850rwhp-return-style-fuel-system","title":"DivisionX 850-2,000+ HP Return Style Fuel System (2007-2014 Shelby GT500)","description":"\u003cp\u003eThe Lethal Performance \/ DivisionX GT500 fuel systems are the most widely used, best performing return style fuel systems on the market. These systems come complete with everything you need to convert your car to a return style fuel system. These systems are also completely upgradable so later down the road if you need to support more power or a different fuel type all that's needed is a pump upgrade and you're good to go.\u003cbr\u003e\n\u003cbr\u003e\nThis system comes standard with pre-assembled Fragola PTFE fuel hose. This hose has a PTFE inner liner, stainless steel braid and a protective black vinyl cover so the hose will not scratch any paint or parts of the vehicle or engine. PTFE fuel hose is more durable than the standard hose and prevents fuel smell typically found when using non PTFE lined hose.We have used the standard Fragola pushlite fuel hose on several of our shop cars with both gasoline and E85 with excellent results and no fuel smell. If you would like the non PTFE hose please choose that option from the dropdown menu. If you decide to purchase this kit with the standard hose Lethal Performance will not be liable for claims of fuel smell after installation.\u003cbr\u003e\n\u003cbr\u003e\nThe Lethal Performance return style fuel systems come in two different ways. For the 07-09 cars we use a traditional style setup where the regulator is placed after the fuel rails. For the 2010 model however we use a deadhead setup which places the fuel pressure regulator before the rails and dead heads the fuel rails. We have used the system in both configurations with excellent results even in the 1250rwhp range on E85.\u003cbr\u003e\n\u003cbr\u003e\nThe fuel lines in this system come pre-assembled. Due to this, the installation of the system becomes much easier as you will not need to install any hose ends. With that said, the system is designed to be installed one way. If you try and install the lines in any other configuration then the one we designed it for you won't be able to properly install the system.\u003cbr\u003e\n\u003cbr\u003e\nLethal Performance is not responsible for any additional hose or fittings required due to custom installation.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eEasy to Upgrade-\u003c\/strong\u003e If at any point you grow out of the system you're in and need to step up to the next system to support more hp all you need is the pumps as all of the systems are the same except for the pumps.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eThe Lethal Performance \/ DivisionX Return Style Fuel System Includes:\u003c\/strong\u003e\u003cbr\u003e\nDivisionX S197 Dual Triple Pump Return Style Fuel Hat\u003cbr\u003e\nDivisionX GT500 High Flow Fuel Rails -\u003cbr\u003e\nDivisionX 10 Micron Fuel Filter\u003cbr\u003e\nPTFE Teflon Lined fuel hose (pre-assembled)\u003cbr\u003e\nAeromotive Pro-Series 4 Port 1:1 Boost Reference EFI Fuel Pressure Regulator\u003cbr\u003e\n(2) Walbro F90000267 Fuel Pumps (upgradable)\u003cbr\u003e\nLethal Performance Dual Relay Wiring Harness\u003cbr\u003e\nDivisionX 0-100psi Fuel Pressure Regulator\u003cbr\u003e\nXRP and Fragola Fuel Fittings\u003cbr\u003e\nFragola PTFE Pre-Assembled Fuel Hose Kit\u003cbr\u003e\nOEM Level Sender (If required)\u003cbr\u003e\nLoom Clamps, Self Tapping Screws and Zip Ties\u003cbr\u003e\nVacuum Hose and T- Fitting for Boost Reference\u003cbr\u003e\nComplete Installation Guide with Diagram can be downloaded from the Installation Instruction section at the bottom of our home page.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNOTES:\u003c\/strong\u003e 2010+ GT's and GT500's use a different level sender than the 05-09 GT's and 07-09 GT500's. Due to that all 2010+ GT's and GT500's need to re-use their stock level sender with this hat and purchase the adapter to mate the level sender to the fuel hat.\u003c\/p\u003e\n\u003cp\u003eLooking for instructions? \u003ca href=\"https:\/\/www.lethalperformance.com\/pages\/fuel-system-installation-instructions\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":47954751258882,"sku":"LP-FS-GT500","price":2329.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/s197_2pumps_walbro_ptfe_1.png?v=1785025042"},{"product_id":"division-x-2005-2010-3v-mustang-gt-850-hp-return-style-fuel-system","title":"DivisionX 850-2,000+ HP Return Style Fuel System (2005-2010 3V Mustang GT)","description":"\u003cp\u003eThe Lethal Performance \/ DivisionX mustang fuel systems are the most widely used, best performing return style fuel systems on the market. These systems come complete with everything you need to convert your car to a return style fuel system. These systems are also completely upgradable so later down the road if you need to support more power or a different fuel type all that's needed is a pump upgrade and you're good to go.\u003cbr\u003e\n\u003cbr\u003e\nThis system comes standard with pre-assembled Fragola PTFE fuel hose. This hose has a PTFE inner liner, stainless steel braid and a protective black vinyl cover so the hose will not scratch any paint or parts of the vehicle or engine. PTFE fuel hose is more durable than the standard hose and prevents fuel smell typically found when using non PTFE lined hose.We have used the standard Fragola pushlite fuel hose on several of our shop cars with both gasoline and E85 with excellent results and no fuel smell. If you would like the non PTFE hose please choose that option from the dropdown menu. If you decide to purchase this kit with the standard hose Lethal Performance will not be liable for claims of fuel smell after installation.\u003cbr\u003e\n\u003cbr\u003e\nThe Lethal Performance return style fuel systems come in two different ways. For the 07-09 cars we use a traditional style setup where the regulator is placed after the fuel rails. For the 2010 model however we use a deadhead setup which places the fuel pressure regulator before the rails and dead heads the fuel rails. We have used the system in both configurations with excellent results even in the 1250rwhp range on E85.\u003cbr\u003e\n\u003cbr\u003e\nThe fuel lines in this system come pre-assembled. Due to this, the installation of the system becomes much easier as you will not need to install any hose ends. With that said, the system is designed to be installed one way. If you try and install the lines in any other configuration then the one we designed it for you won't be able to properly install the system.\u003cbr\u003e\n\u003cbr\u003e\nLethal Performance is not responsible for any additional hose or fittings required due to custom installation.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eEasy to Upgrade-\u003c\/strong\u003e If at any point you grow out of the system you're in and need to step up to the next system to support more hp all you need is the pumps as all of the systems are the same except for the pumps.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eThe Lethal Performance \/ DivisionX Return Style Fuel System Includes:\u003c\/strong\u003e\u003cbr\u003e\nDivisionX S197 Dual\/Triple Pump Return Style Fuel Hat\u003cbr\u003e\nDivisionX 3V High Flow Fuel Rails - Black Anodized\u003cbr\u003e\nDivisionX 10 Micron Fuel Filter\u003cbr\u003e\nPTFE Teflon Lined fuel hose (pre-assembled)\u003cbr\u003e\nAeromotive Pro-Series 4 Port 1:1 Boost Reference EFI Fuel Pressure Regulator\u003cbr\u003e\n(2) Walbro F90000267 Fuel Pumps (upgradeable)\u003cbr\u003e\nLethal Performance Dual or Triple Relay Wiring Harness\u003cbr\u003e\nDivisionX 0-100psi Fuel Pressure Regulator\u003cbr\u003e\nXRP and Fragola Fuel Fittings\u003cbr\u003e\nFragola PTFE Pre-Assembled Fuel Hose Kit\u003cbr\u003e\nLoom Clamps, Self Tapping Screws and Zip Ties\u003cbr\u003e\nVacuum Hose and T- Fitting for Boost Reference\u003cbr\u003e\nComplete Installation Guide with Diagram can be downloaded from the Installation Instruction section at the bottom of our home page.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNOTES:\u003c\/strong\u003e 2005-2009 Mustang GT's and 2007-2009 GT500's to re-use their factory level sender. 2010+ GT's and GT500's use a different level sender than the 05-09 GT's and 07-09 GT500's. Due to that all 2010+ GT's and GT500's need to re-use their stock level sender with this hat and purchase the adapter to mate the level sender to the fuel hat.\u003c\/p\u003e\n\u003cp\u003eLooking for instructions? \u003ca href=\"https:\/\/www.lethalperformance.com\/pages\/fuel-system-installation-instructions\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":47954751455490,"sku":"LP-FS-05103V","price":2399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/3v_2pumps_walbro_ptfe_2.png?v=1785025035"},{"product_id":"divisionx-dx-11821-the-box-dual-triple-pump-staged-fuel-pump-controller","title":"DivisionX DX-11821 The Box Dual \/ Triple Pump Staged Fuel Pump Controller","description":"\u003cdiv\u003e\u003ca href=\"https:\/\/www.lethalperformance.com\/info\/thebox\/\" target=\"_blank\"\u003eCHECK OUT OUR FULL WRITEUP ON THE BOX!\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003eThe DivisionX Box is a universal wiring solution for return style fuel systems running up to three fuel pumps.\u003cbr\u003e\nThe Box allows you to run 3 pumps at all time or staged with a Hobbs \/ Pressure switch. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003cbr\u003e\nRelays are rated at 50 amps (typical fuel pump relays are rated 30 to 40 amps)\u003cbr\u003e\nCircuitry uses \"Plug And Play\" design.\u003cbr\u003e\nThree integrated 30 amp replaceable fuses.\u003cbr\u003e\nStatus LEDs on relay OUTPUTS. Inline 80amp Fuse for main power wire to controller\u003cbr\u003e\nRun one, two or three fuel pumps full time or with remaining pumps activated on demand with an external hobbs\/pressure switch\u003cbr\u003e\n4 Gauge Main Power Wire\u003cbr\u003e\n12 Gauge wiring from Controller Box to Pumps\u003cbr\u003e\nOEM 6 Pin Connector for Plug and Play compatibility with all DivisionX Fuel Hats\u003cbr\u003e\nFuel pump trigger system works with switched 12V+ on\/off (9V+ minimum) High Current APP connectors for main power and ground to controller\u003cbr\u003e\nPositive trigger inputs using plug-in miniature connection: 10 to 16 VDC:\u003cbr\u003e\n1- powers pump 1\u003cbr\u003e\n2- powers pumps 2 and 3\u003cbr\u003e\nIntegrated SB connector rated at 50 amps\u003cbr\u003e\nIndividual fuel pump output connectors for each relay.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\nDivision X The Box Fuel Pump Controller\u003cbr\u003e\n15ft 4 AWG Power \/ Ground Wire\u003cbr\u003e\n4 AWG Ring Terminals\u003cbr\u003e\n7ft 12 AWG for 3 Fuel Pumps with Plug and Play Connector\u003cbr\u003e\nIn-Line Fuse Holder with 80amp Fuse (Main Power to Controller)\u003cbr\u003e\n15ft Wiring Harness for Pump Trigger \/ Hobbs \/ Pressure Switch\u003cbr\u003e\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":47954753093890,"sku":"DX-11821","price":269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/dx-11821.jpg?v=1785026052"},{"product_id":"divisionx-high-flow-10-micron-fuel-filter-47538","title":"DivisionX 10 Micron High Flow Fuel Filter with Stainless Steel Element (E-85 and other ethanol based fuels)","description":"When it comes to fuel systems choosing a high quality fuel filter is definitely a must. It's a simple step towards protecting your injectors and ultimately your engine.  The DivisionX fuel filters are made from high grade CNC machined aluminum and feature O-ring seals on each end. The paper filter element is provided to us by an industry leader and is designed to work with gasoline, race fuels and ethanol based fuels such as E-85, E-98 and E-100.\u003cbr\u003eEach filter housing accepts -10an ORB Fittings\u003cstrong\u003e (Sold Separately)\u003c\/strong\u003e and the filters are replaceable. \u003cbr\u003e \u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eCompact Design (2\" Wide and 5-1\/2\" Long)\u003c\/li\u003e\n\u003cli\u003eBright Dip Black Anodized Finish provides a long lasting protective finish\u003c\/li\u003e\n\u003cli\u003e10 Micron Stainless Steel Wire Mesh Filter Element (Compatible with gasoline, race fuels and ethanol based fuels such as E-85, E-98 and E-100)\u003c\/li\u003e\n\u003cli\u003eAccepts -10an ORB fittings.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":47954753585410,"sku":"DX-0010MW","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/filteropen_1_1.jpg?v=1785025091"},{"product_id":"divisionx-large-marge-10-micron-high-flow-fuel-filter-microglass-element-e85-compatible","title":"DivisionX Large Marge 10 Micron High Flow Fuel Filter (MicroGlass Element \/ E85 Compatible)","description":"When it comes to fuel systems choosing a high quality fuel filter is definitely a must. It's a simple step towards protecting your injectors and ultimately your engine. The DivisionX fuel filters are made from high grade CNC machined aluminum and feature O-ring seals on each end. \u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eDivisionX Large Marge Fuel Filter Features:\u003c\/strong\u003e\u003cbr\u003e\n6.5\" x 2.75\" Diameter\u003cbr\u003e\nEach filter housing accepts -10an ORB Fittings\u003cbr\u003e\n10 Micron MicroGlass Filter Element\u003cbr\u003e\nFully Serviceable\u003cbr\u003e\nBright Dip Black Anodized for a long lasting protective finish\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\u003cstrong\u003eIncludes: \u003cbr\u003e\n(1) Filter Housing Assembly \u003cbr\u003e\n(1) MicroGlass Filter Element\u003c\/strong\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":47954753782018,"sku":"DX-0020LM-MG","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/largemarge_withelements_1.jpg?v=1784989452"},{"product_id":"divisionx-large-marge-10-micron-high-flow-fuel-filter-stainless-steel-element-e85-compatible","title":"DivisionX Large Marge 10 Micron High Flow Fuel Filter (Stainless Steel Element \/ E85 Compatible)","description":"When it comes to fuel systems choosing a high quality fuel filter is definitely a must. It's a simple step towards protecting your injectors and ultimately your engine. The DivisionX fuel filters are made from high grade CNC machined aluminum and feature O-ring seals on each end. \u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eDivisionX Large Marge Fuel Filter Features:\u003c\/strong\u003e\u003cbr\u003e\n6.5\" x 2.75\" Diameter\u003cbr\u003e\nEach filter housing accepts -10an ORB Fittings\u003cbr\u003e\n10 Micron Stainless Steel Filter Element\u003cbr\u003e\nFully Serviceable\u003cbr\u003e\nBright Dip Black Anodized for a long lasting protective finish\u003cbr\u003e\n\n\u003cbr\u003e\u003cstrong\u003eIncludes: \u003cbr\u003e\n(1) Filter Housing Assembly \u003cbr\u003e\n(1) Stainless Steel Filter Element\u003c\/strong\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":47954753650946,"sku":"DX-0020LM-SS","price":128.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/largemarge_withstandard_notext.jpg?v=1784989452"},{"product_id":"divisionx-2-into-1-y-block-with-fittings","title":"DivisionX 2-into-1 Y-Block with Fittings","description":"\u003cp\u003e\u003cstrong\u003eDivisionX 2-into-1 Y-Block with Fittings\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe DivisionX 2-into-1 Y-Block are CNC machined out of high quality billet aluminum. They use -8an O-ring ports all around so you have several different fitting combinations to choose from. The DivisionX Y-Blocks are hard anodized in a black finish and are compact so they fit in most places. Whether it be under the car or in the engine bay the DivisionX y-block not only functions well but looks great too. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003cbr type=\"_moz\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCNC Machined Aluminum\u003cbr type=\"_moz\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e(2) -8an Inlets\u003cbr type=\"_moz\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e(1) -8an Outlet\u003cbr type=\"_moz\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHard Anodized Black Finish\u003cbr type=\"_moz\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompact Design\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":47954754142466,"sku":"DX-221Y","price":63.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/dx-221y_1.jpg?v=1785025066"},{"product_id":"divisionx-99-04-2v-gt-high-flow-fuel-rails-yes-black","title":"DivisionX 99-04 2V GT High Flow Fuel Rails","description":"\u003cp\u003e\u003cstrong\u003edivisionX 99-04 2V GT High Flow Fuel Rails\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e**We have confirmed that these rails will NOT fit Kenne Bell applications due to bypass valve location**\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: \u003cbr\u003e-The divisionX Fuel Rails are sold as the rails only  with no fittings. Use the dropdown menu to add the -8an fitting kit  which also includes a stock line to aftermarket rail adapter. \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eAll new at Lethal Performance is another amazing product from our good  friends over at divisionX.  For some time now we've seen the need for a  better fuel rail solution. Up until now the rails available to the  market had not fit all applications as well as there were a few  applications that required modification for them to fit.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePROBLEM SOLVED!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eAs we worked with divisionX to make a better designed fuel rail the  objective was to make a higher quality rail than anyone else which will  fit all applications. \u003cbr\u003e\u003cbr\u003eThere's more to the divisionX Rails then fitment as they also provide  some features that no other rail on the market does. Up until now if you  wanted to run an electric fuel pressure gauge you would need a fuel  block that mounted in between the aftermarket rail and fuel rail  pressure sensor. Same goes for tapping into the rail for a nitrous  setup. The additional block is no longer needed with the divisionX Rails  as they have 2 ports machined into them already. This allows for you to  run the fuel pressure sending unit or nitrous connection by simply  screwing the sending unit or NPT fitting into the already machined  ports. \u003cbr\u003e\u003cbr\u003eAnother huge feature of the divisionX rail is the actual design. Due to  the way some other rails on the market have been designed leaking fuel  at the injector can occur. This is because the rails do not sit 100% on  top of the injectors. They are mounted to the manifold in a way which  tilts the rail on an angle and keeps them from properly sitting on the  injector. The angled design compromises a secure fit. \u003cbr\u003e\u003cbr\u003eThe divisionX rails however have a complete uncompromised fit which sits  straight on the injector providing a leak proof seal. Not only is this  the way the rails should fit on the injectors but when looking at the  divisionX rails mounted on the car they are straight and look how they  should.   \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003edivisionX Fuel Rail Features:\u003cbr\u003e\u003cbr\u003eThese are the most well conceived fuel rails available for this specific application:\u003cbr\u003e\u003cbr\u003e-OEM positioning, orientation, and size of o-ring seats for injectors.\u003cbr\u003e-Robust bolt on mounts for safe and reliable injector seating. Stainless steel mounting hardware included.\u003cbr\u003e-Fuel Rail Pressure Sensor Mount.  -FRPS bank includes a 1\/8\" NPT fitting for remote fuel pressure sending  units for in car fuel pressure gauges. Optional block-off available for  return style systems.\u003cbr\u003e-Auxilliary connection bank has provisions for locking down a Kenne Bell  restrictor orifice for FRPS replacement without fear of losing  restrictor orifice.\u003cbr\u003e-Unique low profile design clears inlet of twinscrew superchargers.  Overall rail height is the same as the OEM rails WHILE providing a 56%  larger bore than the stock fuel rails.\u003cbr\u003e-SAE o-ring boss ports (-8 size) on front and back of both rails.\u003cbr\u003e-Front of rails is truncated to maximize clearance in the front of the  rails. Aft of rails are positioned to maximize flexibility of  supply\/crossover lines.\u003cbr\u003eThese fuel rails are machined from 6061-T6511 from a solid block of aluminum. There are no welds or caulk to fail.\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e \u003cstrong\u003eNOTE: \u003cbr\u003e-The divisionX Fuel Rails are sold as the rails only  with no fittings. Use the dropdown menu to add the -8an fitting kit  which also includes a stock line to aftermarket rail adapter.\u003c\/strong\u003e\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":47954766332162,"sku":"DX-2VRAILS - 04","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/2vrails_blk_1.jpg?v=1785025074"},{"product_id":"divisionx-dx-5200-kit-billet-high-flow-fuel-rail-kit-2020-2022-5-2l-shelby-gt500","title":"DivisionX DX-5200-KIT Billet High Flow Fuel Rail Kit (2020-2022 5.2L Shelby GT500)","description":"\u003cdiv class=\"video-container\"\u003e\u003ciframe frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/fEUZUzPGMY8\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003eAll new for the Ford 2020-2022 5.2L Shelby GT500 are the DivisionX billet high flow fuel rails. When making more power on your GT500 or running other fuel types such as E85 we have seen pressure drops at the fuel rails when using the stock rails. This is due to the poor crossover design of the factory fuel rails. We designed our new billet fuel rails to not only fix this issue but to give you a better looking engine bay as well. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e This is the complete fuel rail kit for your 2020-2022 Shelby GT500 and comes with the fuel rails as well as all necessary hoses, fittings and adapters to install on your car using the factory fuel line feed. \u003cbr\u003e All of the hoses in this kit are pre-assembled Fragola PTFE hose. The Fragola PTFE hose prevents any fuel smell unlike other non PTFE hoses. The Fragola PFTE hose consists of an inner PTFE lining which is covered in a stainless braid and then has a black plastic protective sheath on it. This not only gives the hose a much stealthier look but also prevents any type of scratching to your vehicle from a stainless braided hose. \u003cbr\u003e\u003cbr\u003e The DivisionX 2020-2022 Shelby GT500 fuel rails feature -8an ports on each end the rail and have the provision for the stock fuel line. They also come with an additional 1\/8\" NPT port for either a fuel pressure gauge, sending unit or wet nitrous system connection. High strength mounting tabs and hardware also included. \u003cbr\u003e\u003cbr\u003e The DivisionX 2020-2022 GT500 fuel rails can be purchased alone or with the hose and adapter kit. \u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eFuel Rail Kit Features:\u003c\/strong\u003e\u003cbr\u003e Black Anodized\u003cbr\u003e 6061 CNC Billet Aluminum\u003cbr\u003e -8 AN o-ring ports\u003cbr\u003e High Strength Mounting tabs \u003cbr\u003e Direct OEM replacement \/mounting\u003cbr\u003e Attachment for OEM fuel pressure sensor\u003cbr\u003e All Necessary Lines, Fittings and Adapters to Connect to the Factory Fuel Line\u003cbr\u003e Fragola Pre-Assembled PTFE Hose\u003cbr\u003e 1\/8\" NPT plug included\u003cbr\u003e Made in the U.S.A.\u003cbr\u003e Lifetime Warranty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck out our full write-up \u003ca href=\"https:\/\/www.lethalperformance.com\/info\/gt500rails\" target=\"_blank\"\u003eHERE!\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48139425284354,"sku":"DX-202052-KIT","price":439.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/2020gt500rails_kit3_1.jpg?v=1784939934"},{"product_id":"divisionx-sn95-hat-to-stock-fuel-line-adapter-fititng","title":"DivisionX DX-022 10an x 3\/8\" Adapter Fitting (For DivisionX Fuel Hat to Stock Fuel Line)","description":"\u003cp\u003e\u003cstrong\u003eDivisionX SN95 Hat to Stock Fuel Line Adapter Fitting\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eFor those looking to install the DivisionX dual pump fuel hat and adapt it to the stock fuel line this is the answer.   This is a simple billet aluminum fitting that replaces the feed fitting on the fuel hat manifold by screwing into the -10an O-ring port . The other end of the fitting then connects to the stock fuel line using an OEM style connection.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e -10an Oring x 3\/8\"\u003cbr\u003e OEM Feed Line Adapter Fitting\u003cbr\u003e Measures 2.5\" from the O-Ring seat to the end of the adapter stem\u003cbr\u003e Black Anodized\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48141288243458,"sku":"DX-022","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/dx-022.jpg?v=1784983300"},{"product_id":"divisionx-100mm-dual-ball-bearing-idler-black","title":"divisionX 100mm Dual Ball Bearing Idler (Black)","description":"\u003cp\u003e\u003cstrong\u003edivisionX 100mm Dual Ball Bearing Idler (Black)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe new idlers from divisionX are not only the best looking idler to hit  the market place but were also designed to be the best performing idlers  as well. The design was inspired from the 2010 GT500 wheel which looks amazing. divisionX idlers are cnc machined out of high grade  billet  aluminum which ends up getting hard anodized for a long lasting  protective  finish. It uses not one but two heavy duty ball bearings  which are meant  to outlast the single bearing design as well as stand  up to the abuse that these idlers see from being  spun at such high  rpms. All of the idlers also come with a cnc machined dust cover which  helps provide support for the idler and keep dust and debris out of the  bearings. \u003c\/p\u003e\u003cp\u003eThese idlers not only work with their idler bracket but also can be  used as a heavy-duty replacement for the  two idler pulleys on the  factory crossover bracket, and as a heavy-duty  replacement for the  factory crank idler on the 2003-2004 Mustang Cobra.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCNC Machined High Grade Billet Aluminum\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHard Anodized for a long lasting protective finish\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHeavy Duty Dual Ball Bearing Design\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBillet Dust Cover provides extra support and keeps dust and debris out of the bearings\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48141314457858,"sku":"DX-5510-1B","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/dx-5510-1b.jpg?v=1784983436"},{"product_id":"divisionx-100mm-dual-ball-bearing-idler-clear","title":"divisionX 100mm Dual Ball Bearing Idler (Clear)","description":"\u003cp\u003e\u003cstrong\u003edivisionX 100mm Dual Ball Bearing Idler (Clear)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe new idlers from divisionX are not only the best looking idler to  hit  the market place but were also designed to be the best performing  idlers  as well. The design was inspired from the 2010 GT500 wheel which  looks amazing. divisionX idlers are cnc machined out of high grade   billet  aluminum which ends up getting hard anodized for a long lasting   protective  finish. It uses not one but two heavy duty ball bearings   which are meant  to outlast the single bearing design as well as stand   up to the abuse that these idlers see from being  spun at such high   rpms. All of the idlers also come with a cnc machined dust cover which   helps provide support for the idler and keep dust and debris out of the   bearings. \u003c\/p\u003e\u003cp\u003eThese idlers not only work with their idler bracket but also can be   used as a heavy-duty replacement for the  two idler pulleys on the   factory crossover bracket, and as a heavy-duty  replacement for the   factory crank idler on the 2003-2004 Mustang Cobra.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCNC Machined High Grade Billet Aluminum\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHard Anodized for a long lasting protective finish\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHeavy Duty Dual Ball Bearing Design\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBillet Dust Cover provides extra support and keeps dust and debris out of the bearings\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48141314720002,"sku":"DX-5510-1C","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/dx-5510-1c.jpg?v=1784983436"},{"product_id":"divisionx-99-04-stock-level-sender-bracket","title":"DivisionX 99-04 GT\/ 03-04 Mach-1 \/ 99-01 Cobra Stock Level Sender Bracket","description":"\u003cp\u003e\u003cstrong\u003eDivisionX 99-04 Stock Level Sender Bracket\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis bracket can be used to adapt your 99-04 GT, 03-04 Mach-1 or 99-01 Cobra fuel level sender with the DivisionX SN95 fuel hats. This means that you no longer need to purchase the 03-04 Cobra level sender in order to run a DivisionX hat. Simple install this bracket on the fuel hat and clip your stock level sender onto it and you're done.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: For older design Division X hats.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48141319209218,"sku":"DX-37011","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/dx-37011_2.jpg?v=1784983461"},{"product_id":"divisionx-99-04-mustang-stock-rail-to-8an-regulator-feed-adapter","title":"DivisionX 99-04 Mustang Stock Rail to -8an Regulator Feed Adapter","description":"\u003cp\u003e\u003cstrong\u003eDivisionX 99-04 Mustang Stock Rail to -8an Regulator Feed Adapter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eUsed in our Budget Return Style fuel systems, this fitting adapts the Magnafuel regulator to your stock 99-04 v8 Mustang fuel rails so that you can convert to a return style fuel system  for the least amount of money possible.\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48141319930114,"sku":"DX-081611","price":64.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/dx-081611.jpg?v=1784983463"},{"product_id":"divisionx-2-port-efi-fuel-pressure-regulator","title":"DivisionX 2 Port EFI 1:1 Boost Reference Fuel Pressure Regulator","description":"\u003cul\u003e\n\u003cli\u003eUnique guided-metering valve assembly provides accurate metering              of fuel flow\u003c\/li\u003e\n\u003cli\u003eDivisionX EFI Regulators provide the most stable platform for fuel              delivery in the performance industry\u003c\/li\u003e\n\u003cli\u003eMaintains steady fuel fuel flow during times of sudden changes  in              fuel demands, such as initial launch, gear change and  nitrous oxide              application\u003c\/li\u003e\n\u003cli\u003eDesigned for use with the MagnaFuel EFI gear pumps\u003c\/li\u003e\n\u003cli\u003eRegulators available in two different body sizes and different  spring              combination's to suit your fuel flow at pressure  specifications\u003c\/li\u003e\n\u003cli\u003eEach Regulator has 1\/8\" NPT gauge port, standard filtered vent               fitting or boost reference fitting (1:1 compensation ratio)\u003c\/li\u003e\n\u003cli\u003eSpecial fittings and adapters available for most applications\u003c\/li\u003e\n\u003cli\u003eAll DivisionX Regulators are hand assembled to the highest quality\u003c\/li\u003e\n\u003cli\u003eDivisionX Regulators are compatible with racing gasoline and alcohol              fuels\u003c\/li\u003e\n\u003cli\u003eBillet body precision CNC-machined from aircraft-quality aluminum              and hard anodized for extra long service life\u003c\/li\u003e\n\u003cli\u003eCompletely user-serviceable, with ready to order replacements parts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e \u003cbr\u003e MP-9925-B uses 2 X #8 AN, 1 X #6 AN return ports. \u003cbr\u003e \u003cbr\u003e *** Fittings are not included ***\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48141321601282,"sku":"DX-1039","price":184.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/DX-1039.jpg?v=1784983473"},{"product_id":"divisionx-fuel-rail-pressure-sensor-block-off-plate","title":"DivisionX 99-04 Mustang FRPS Block Off Plate (Black)","description":"\u003cp\u003eIf you're looking to convert to a return style fuel system and would like to delete the FRPS then you'll need one of the DivisionX block off plates. The block off plate simply bolts to the fuel rail in the location where the FRPS used to be and seals off the port that used to feed fuel to the pressure sensor. The DivisionX block off plates come in a clear or black anodized finish and are a direct fit on all DivisionX 2v and 4v fuel rails. \u003cbr\u003e\u003cbr\u003eStainless steel screws and O-ring are included. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48141321666818,"sku":"DX-1117-B","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/dx-0010b.jpg?v=1784983473"},{"product_id":"divisionx-fuel-rail-pressure-sensor-block-off-plate-46735","title":"DivisionX 99-04 Mustang FRPS Block Off Plate (Clear)","description":"\u003cp\u003eIf you're looking to convert to a return style fuel system and would like to delete the FRPS then you'll need one of the DivisionX block off plates. The block off plate simply bolts to the fuel rail in the location where the FRPS used to be and seals off the port that used to feed fuel to the pressure sensor. The DivisionX block off plates come in a clear or black anodized finish and are a direct fit on all DivisionX 2v and 4v fuel rails. \u003cbr\u003e\u003cbr\u003eStainless steel screws and O-ring are included. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48141321830658,"sku":"DX-1117-C","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/dx-0010c.jpg?v=1784983473"},{"product_id":"divisionx-fuel-rail-pressure-seosnr-adapter-fitting-frps","title":"DivisionX 99-04 Mustang Fuel Rail Pressure Sensor Adapter","description":"\u003cp\u003eThe DivisonX fuel rail pressure sensor adapter was designed to allow for the Ford factory FRPS (fuel rail pressure sensor) to be installed on aftermarket fuel rails or fuel pressure regulators which use -8an (3\/4-16) O-ring fittings.\u003c\/p\u003e\u003cp\u003eThe adapter comes with a Viton O-ring and M5 bolts for simple installation.\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-family: Arial,Helvetica,sans-serif; font-size: x-small;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48141325041922,"sku":"DX-8118","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/dx-8118.jpg?v=1784983493"},{"product_id":"divisionx-05-2010-mustang-gt-high-flow-fuel-rails","title":"DivisionX 05-2010 Mustang GT High Flow Fuel Rails","description":"The Ford 4.6l 3V has been around for some time and has been pushed to its limits by builders. Fueling is critical in ensuring steady and safe power delivery and upgraded fuel rails go a long way. The DivisionX Fuel Rails are milled from a solid block of 6061 aluminum and are engineered to optimize fuel delivery. The kit can be optioned to interface with OEM components or with generic fittings for upgraded\/return fuel systems.\u003cbr\u003e\u003cbr\u003e\n\nCAD\/CAM\/CMM Engineered and manufactured\u003cbr\u003e\nBlack Anodized\u003cbr\u003e\n6061 CNC Billet Aluminum\u003cbr\u003e\n-8 AN o-ring port\u003cbr\u003e\nMounting tabs are incorporated for strength\u003cbr\u003e\nDirect OEM replacement \/mounting\u003cbr\u003e\nAttachment for OEM fuel pressure sensor (05-10 only)\u003cbr\u003e\nHardware, plugs included\u003cbr\u003e\nMade in the U.S.A.\u003cbr\u003e\nLifetime Warranty\u003cbr\u003e\u003cbr\u003e\n\n\n\n\n\u003cstrong\u003eThese rails will clear most of the supercharger upgrades available for the Mustang GT. The only blowers we know that these don't fit on are the Kenne Bell superchargers.\u003c\/strong\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48141325107458,"sku":"DX-05103VRAILS","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/3vrails_1.jpg?v=1784983490"},{"product_id":"divisionx-high-flow-10-micron-fuel-filter-element-wire-washable","title":"DivisionX 10 Micron Wire Mesh Washable Replacement Filter Element (E85 and Flex Fuels)","description":"\u003cp\u003eReplacement 10 Micron Wire Mesh Washable Replacement Filter Element (E85 and Flex Fuels)Recommended for use with E-85 and Flex FuelsThis filter element can be washed and re-used.\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48141325304066,"sku":"DX-10MW","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/dx-10mw.jpg?v=1784983493"},{"product_id":"divisionx-walbro-465-lph-fuel-pump-pigtail-harness","title":"DivisionX Walbro Fuel Pump Pigtail for F90000267, F90000274, F90000285, F90000295","description":"\u003cp\u003eThe DivisionX Walbro F90000267, F90000274, F90000285, F90000295 was designed to allow simple installation of the F90000267, F90000274, F90000285, F90000295 pumps into the DivisionX SN95 and S197 hats. These pigtails install on the underside of the DivisionX hat without any cutting or splicing making them 100% plug and play. So if you already own a DivisionX fuel hat and are using another pump other than the 465's and want to switch to the 465's this is the pigtail you'll want to purchase. \u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48141333135618,"sku":"DX-465PLUG","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/dx-465plug.jpg?v=1784983537"},{"product_id":"divisionx-07-2014-shelby-gt500-2011-2017-mustang-5-0l-oem-line-adapter-for-aftermarket-fuel-rails","title":"DivisionX 07-2014 Shelby GT500 \/ 2011-2021 Mustang 5.0L OEM Line Adapter for Aftermarket Fuel Rails","description":"\u003cp\u003eNew DivisionX line adapter for aftermarket rails is now here! Featuring a low profile design, this adapter connects aftermarket rails that use -8an O ring threads to the OEM fuel line. Also incorporated into the adapter is a 1\/8\" NPT port (plug supplied) that can be utilized for a pressure gauge or nitrous fuel feed. \u003c\/p\u003eFeatures:\u003cbr\u003e\u003cli\u003eGloss black anodized\u003c\/li\u003e\u003cli\u003eLow profile design\u003c\/li\u003e\u003cli\u003eConnects OEM line to -8an fuel rails\u003c\/li\u003e\u003cli\u003e1\/8\" NPT port for pressure gauge or nitrous fuel (plug supplied)\u003c\/li\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48141361316098,"sku":"DX-505458","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/p1010006.jpg?v=1784983692"},{"product_id":"divisionx-dx-5200-billet-high-flow-fuel-rails-2020-2022-5-2l-shelby-gt500","title":"DivisionX DX-5200 Billet High Flow Fuel Rails (2020-2022 5.2L Shelby GT500)","description":"\u003cdiv class=\"video-container\"\u003e\u003ciframe frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/fEUZUzPGMY8\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003eAll new for the Ford 2020-2022 5.2L Shelby GT500 are the DivisionX billet high flow fuel rails. When making more power on your GT500 or running other fuel types such as E85 we have seen pressure drops at the fuel rails when using the stock rails. This is due to the poor crossover design of the factory fuel rails. We designed our new billet fuel rails to not only fix this issue but to give you a better looking engine bay as well. \u003cbr\u003e\u003cbr\u003eThe DivisionX 2020-2022 Shelby GT500 fuel rails feature -8an ports on each end the rail and have the provision for the stock fuel line. They also come with an additional 1\/8\" NPT port for either a fuel pressure gauge, sending unit or wet nitrous system connection. High strength mounting tabs and hardware also included. \u003cbr\u003e\u003cbr\u003eThe DivisionX 2020-2022 GT500 fuel rails can be purchased alone or with the hose and adapter kit. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFuel Rail Features:\u003c\/strong\u003e\u003cbr\u003eBlack Anodized\u003cbr\u003e6061 CNC Billet Aluminum\u003cbr\u003e-8 AN o-ring ports\u003cbr\u003eHigh Strength Mounting tabs \u003cbr\u003eDirect OEM replacement \/mounting\u003cbr\u003eAttachment for OEM fuel pressure sensor\u003cbr\u003e1\/8\" NPT plug included\u003cbr\u003eMade in the U.S.A.\u003cbr\u003eLifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck out our full write-up \u003ca href=\"https:\/\/www.lethalperformance.com\/info\/gt500rails\" target=\"_blank\"\u003eHERE!\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48141591052546,"sku":"DX-202052","price":265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/2020gt500rails.jpg?v=1784985238"},{"product_id":"division-x-fuel-pressure-regulator-bracket-fits-any-regulator-included-in-division-x-lethal-performance-fuel-systems-all-mustangs","title":"DivisionX Fuel Pressure Regulator Bracket (fits any regulator included in DivisionX \/ Lethal Performance fuel systems) (2015+ Mustang GT S550)","description":"\u003cp\u003eThe Division X Fuel Pressure Regulator Mounting Bracket will cleanly mount your aftermarket fuel pressure regulator to either the driver or passenger side strut tower.\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48141736050946,"sku":"DX-2735-5-1","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/20200507_120518.jpg?v=1784985985"},{"product_id":"divisionx-extreme-flow-2-port-efi-regulator-universal-fit","title":"DivisionX Extreme Flow 2-Port EFI Regulator (Universal Fit)","description":"\u003cp\u003e\u003cem\u003e30-75 PSI and 75-125 PSI Base Pressure Range\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for Mechanical pumps up to 5.0 GPM.\u003c\/li\u003e\n\u003cli\u003eCompact, 2-Port Body with dual AN-10 inlet\/outlet ports and one AN-10 return port.”\u003c\/li\u003e\n\u003cli\u003eHigh Flow 0.313″ Valve\/Seat, optimized for larger electric fuel pumps in the 2.5-5.0 GPM flow range.\u003c\/li\u003e\n\u003cli\u003eDual Springs expand pressure range while maintaining a low profile and reduced weight.\n\u003cul\u003e\n\u003cli\u003eStandard spring (installed) supports 30-75 PSI base fuel pressure.\u003c\/li\u003e\n\u003cli\u003eHigh Pressure spring (included) supports 75-120 PSI base fuel pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSystems where an electric pump is desired and where base pressure exceeds 70-PSI should run two pumps of similar flow rate, in series.\u003c\/li\u003e\n\u003cli\u003eThis product is not legal for sale or use on emission-controlled vehicles except when used on a dedicated race vehicle.\u003c\/li\u003e\n\u003cli\u003eVacuum and boost reference on a 1:1 ratio.\u003c\/li\u003e\n\u003cli\u003eCompatible with gasoline, ethanol and methanol.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48142047084802,"sku":"DX-13143","price":260.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/13143_2.jpg?v=1784987461"},{"product_id":"divisionx-pro-series-efi-fuel-pressure-regulator-universal-fit","title":"DivisionX Pro-Series EFI Fuel Pressure Regulator (Universal Fit)","description":"\u003cp\u003eThe tuner’s choice for high horsepower EFI applications. The Pro-Series Regulator can support up to 2000 HP. For engines requiring high volume, high pressure fuel delivery the Pro-Series Boost Reference EFI Regulator is a perfect fit for serious power.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable base pressure from 30-60 PSI.\u003c\/li\u003e\n\u003cli\u003eAuxiliary ports available for nitrous applications, pressure gauges and transducers.\u003c\/li\u003e\n\u003cli\u003eReferences Vacuum\/Boost on a 1:1 ratio. Includes two boost line adapters, one barbed for rubber hose, the other for AN-04 braided line. (Prevents blow-off in high boost applications)\u003c\/li\u003e\n\u003cli\u003eDedicated 1\/8” NPT port.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eIncludes Aeromotive’s radiused tapered flare fittings:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(3) ORB-08 and (1) ORB-10 inlet ports, two with AN-08 flare adapters.\u003c\/li\u003e\n\u003cli\u003e(1) ORB-10 return port with AN-10 flare adapter port plugs included.\u003c\/li\u003e\n\u003cli\u003eVirtually indestructible electroless nickel-plating finish on the body with type II bright dip black anodized cap.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48142047314178,"sku":"DX-13142","price":401.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/aer-13110_1_1.jpg?v=1784987462"},{"product_id":"divisionx-efi-pro-return-style-regulator-universal-fit","title":"DivisionX EFI Pro Return Style Regulator (Universal Fit)","description":"\u003cp\u003e\u003cem\u003eEFI\u003c\/em\u003e return style\u003cem\u003e Regulator for Return Style Systems\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBase fuel pressure adjustable from 35-75 PSI.\u003c\/li\u003e\n\u003cli\u003eVacuum\/Boost reference capability.\u003c\/li\u003e\n\u003cli\u003e1:1 rising rate for forced induction engines.\u003c\/li\u003e\n\u003cli\u003eGasoline, ethanol, alcohol and diesel compatible.\u003c\/li\u003e\n\u003cli\u003e2 – ORB -08 inlet\/outlet ports on the sides.\u003c\/li\u003e\n\u003cli\u003e1 – ORB-08 return port on the bottom port.\u003c\/li\u003e\n\u003cli\u003e1 – 1\/8″ NPT Gauge Port with plug.\u003c\/li\u003e\n\u003cli\u003e1\/16″ NPT Boost Port with 5\/32″ hose barb.\u003c\/li\u003e\n\u003cli\u003eCompatible with X1 EFI Conversion kit.\u003c\/li\u003e\n\u003cli\u003eCompatible with X1 Carb Conversion kit.\u003c\/li\u003e\n\u003cli\u003e0.313″ return style with matching spring and poppet.\u003c\/li\u003e\n\u003cli\u003eHandles up to 250 GPH with AN-08 return line.\u003c\/li\u003e\n\u003cli\u003eMounting bracket included (not shown).\u003c\/li\u003e\n\u003cli\u003eThis product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48142047412482,"sku":"DX-13307","price":250.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/13306_3_1.jpg?v=1784987462"},{"product_id":"swift-filters-10-micron-wire-mesh-filter-1-020-id-x-1-75-od-x-4-437-062-00-oal-single-open-end-viton-o-ring-seal","title":"DivisionX 10 Micron Wire Mesh Filter - 1.020\" ID X 1.75\" OD X 4.437\" +.062 (-.00)\" OAL, Single Open End, Viton O-Ring Seal (Fits DivisionX Large Marge Filters)","description":"\u003cp\u003e\u003cspan style=\"font-family: 'Arial,Helvetica,sans-serif'; font-size: small; color: rgb(34, 34, 34); background-color: rgb(255, 255, 255);\"\u003e10 Micron Wire Mesh Filter -\u003c\/span\u003e \u003cspan style=\"font-family: 'Arial,Helvetica,sans-serif'; font-size: small; color: rgb(34, 34, 34); background-color: rgb(255, 255, 255);\"\u003e1.020\" ID X 1.75\" OD X 4.437\" +.062 (-.00)\" OAL, Single Open End, Viton O-Ring Seal\u003c\/span\u003e\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48143231353090,"sku":"DX-SF6235-4A-010UWV","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/screen_shot_2022-02-23_at_5.20.24_pm.png?v=1784993842"},{"product_id":"swift-filters-12-micron-pleated-microglass-1-020-id-x-1-75-od-x-4-437-062-00-oal","title":"DivisionX Filter Element 12 Micron Pleated Microglass - 1.020\" ID X 1.75\" OD X 4.437\" +.062 (-.00)\" OAL (Fits DivisionX Large Marge Filters)","description":"\u003cp style=\"margin-bottom: 0px;\"\u003e12 Micron Pleated Microglass - 1.020\" ID X 1.75\" OD X 4.437\" +.062 (-.00)\" OAL\u003c!--EndFragment--\u003e\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48143231484162,"sku":"DX-SF6235-4A-012UMV","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/p7_9020-4mg.jpg?v=1784993843"},{"product_id":"divisionx-preassembled-ptfe-hose-kit-level-2-2011-2017-mustang-5-0-coyote","title":"DivisionX Preassembled PTFE Hose Kit - Level 2 (2011-2017 Mustang 5.0 Coyote)","description":"\u003cp\u003e‌This hose kit routes fuel through a Y block, then the rails, then the regulator.  \u003c\/p\u003e\n\u003cp\u003eThis is a return system hose kit with PTFE hoses and installed Hose End Fittings.\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48145480581378,"sku":"DX-LP-1117L2","price":439.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/lp-s197r-coy.jpg?v=1785004047"},{"product_id":"divisionx-preassembled-ptfe-hose-kit-level-1-2011-2017-mustang-5-0-coyote","title":"DivisionX Preassembled PTFE Hose Kit - Level 1 (2011-2017 Mustang 5.0 Coyote)","description":"\u003cp\u003e‌This hose kit routes fuel through the regulator then the rails.  \u003c\/p\u003e\n\u003cp\u003eThis is a return system hose kit with PTFE hoses and installed Hose End Fittings.\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48145480712450,"sku":"DX-LP-11\/17-BUDRET","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/lp-s197r-coy_a9dd00dd-9b3d-4198-b10b-43b666de541c.jpg?v=1785004052"},{"product_id":"divisionx-fuel-pump-pigtail-for-gss342-aem-and-aeromotive-340-pumps-with-square-connector-design","title":"DivisionX Fuel Pump Pigtail for GSS342, AEM, and Aeromotive 340 Pumps with Square Connector Design","description":"\u003cp\u003eThe DivisionX Pump Pigtail was designed to allow simple installation of the Square Type Connector pumps into the DivisionX SN95 and S197 hats. These pigtails install on the underside of the DivisionX hat without any cutting or splicing making them 100% plug and play. So if you already own a DivisionX fuel hat and are using a compatible pump, this is the pigtail you'll want to purchase.\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48145539203330,"sku":"DX-105449","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/20230118_155616.jpg?v=1785004251"},{"product_id":"divisionx-05-2010-mustang-gt-07-2012-shelby-gt500-triple-pump-tophat","title":"DivisionX 05-2010 Mustang GT \/ 07-2012 Shelby GT500 Triple Pump TopHat","description":"The 4.6L 3V and 5.4L 4V motors in the Mustang GT's and GT500's respectively, are legendary motors. A massive following with amazing aftermarket support – there are virtually no limits to what has been done to this powertrain. With any need to make power – a steady supply of fuel is needed. Enter the TopHat™ fuel solution designed and manufactured by Custom Performance Engineering, Inc. for DivisionX\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003cbr\u003eCAD\/CAM\/CMM Engineered and manufactured \u003cbr\u003e6061 CNC Billet Aluminum \u003cbr\u003eUp to 3 x 485Lph or 3 x 255Lph pumps, mounted vertically \u003cbr\u003eCompatible with Walbro GSS342, F90000262, F90000267, F90000274, F90000285 and Aeromotive 11542 Fuel Pumps\u003cbr\u003eIntegrated merge from all pumps – NO need for additional y-block plumbing \u003cbr\u003eUses OEM siphon -10 AN Feed -8 AN Return \u003cbr\u003eLow profile fitment \u003cbr\u003eIntegrated attachment for OEM fuel level sender \u003cbr\u003eHermetically sealed wires with o-ring \u003cbr\u003eHardware, filters, fuel lines, clamps and etc. included to accommodate various configurations \u003cbr\u003eMade in the U.S.A. \u003cbr\u003eLifetime Warranty\u003cbr\u003e\u003cbr\u003eThe TopHat™ is the ultimate solution for all fueling needs, designed to take up to three 480Lph pumps. The design was also intended to be plug and play, easy to install and reliable with many features to make the transition easier and have you on your way to meeting your power goals. \u003cbr\u003e\u003cbr\u003eThe TopHat™, engineered and manufactured by Custom Performance Engineering, Inc., is the ultimate in upgrades for the fueling system. Accommodating those wanting to run two pumps for a bump in power, to those targeting 1200hp with ethanol – this setup is the all in one solution. \u003cbr\u003e\u003cbr\u003eThe design of the fuel system supports up to three 480lph fuel pumps, delivering more fuel than the more standard 255lph pumps. The pumps are secured with O-rings for optimal height and to isolate vibrations from the aluminum body of the system. \u003cbr\u003e\u003cbr\u003eTo cut the cost of upgrading, simplify the amount of parts and eliminate additional plumbing to reduce leaks we have integrated the merge for the three fuel pumps in the hat itself. Ease of installation is always a big concern for our customers and cp-e™ is striving to deliver in this department. \u003cbr\u003e\u003cbr\u003eAny fuel coming back through the return line is fed down through a ½” stainless steel tube to the bottom of the tank. This helps eliminate aeration of the fuel, providing a more consistent pickup. To further reduce aeration a side port has been incorporated, channeling fuel away from the pump pickup. The supplied O-ring plug blocks off one direction or the other. \u003cbr\u003e\u003cbr\u003eReverse engineering using a CMM arm, modeling OE components and with precision CNC manufacturing we are able to make the TopHat™ as plug and play as possible. We utilize the factory siphon system to extract fuel from the other side of the fuel tank. Necessary features have been CNC milled to mimic OEM design to accommodate the factory level sender, placing it in the exactly the same position as OEM. \u003cbr\u003e\u003cbr\u003eThe wiring harness is isolated and sealed from the fuel tank with a proprietary Delrin wire seal. Delrin has one of the highest resistances to fuels of any plastic, so it was chosen to provide a lifetime of trouble free operation.","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48150089531650,"sku":"DX-0700-2","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/dx3vhat.jpg?v=1785025037"},{"product_id":"divisionx-shelby-gt500-fuel-rail-kit","title":"DivisionX 2007-2014 Shelby GT500 Fuel Rail Kit","description":"\u003cp\u003eNew from DivisionX is this fuel rail kit for the Shelby GT500. Whether you are making big horsepower and need the extra fuel volume, or if you have a show car and just want better looks when you pop the hood, this DivisionX rail kit is for you. It will bolt up and connect to the factory fuel line for easy install and the option to upgrade to larger feed lines at a later date. \u003cbr\u003e\u003cbr\u003eFeatures:\u003c\/p\u003e\u003cp\u003e-Rails available in Clear or Black Anodized (Choose from drop down above)\u003cbr\u003e-Connects to stock fuel lines\u003cbr\u003e-Fits Stock Supercharger\u003cbr\u003e-Fits TVS Supercharger\u003cbr\u003e-Fits all Whipple Superchargers \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e(use with 2.9L requires EGR delete kit)\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e-Fits all Kenne Bell Superchargers\u003cbr\u003e-Fits Vortech\/Lysolm Supercharger\u003cbr\u003e-Supports over 2000 hp with upgraded pumps and lines\u003cbr\u003e-Includes two 1\/8\" NPT ports for use with auxiliary sensors (plugs included)\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48150090744066,"sku":"DX-GT500RAILKIT","price":449.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/dx-gt500railkit_1.jpg?v=1785025076"},{"product_id":"divisionx-2011-2017-mustang-5-0l-high-flow-billet-fuel-rails","title":"DivisionX 2011-2017 Mustang 5.0L High Flow Billet Fuel Rails","description":"\u003cp\u003eNew from DivisionX are these high flow fuel rails for your high powered Coyote and Road Runner engine. Precision machined from 6061 billet aluminum, these rails feature a high luster black anodize finish for great looks, stealth and corrosion protection. Inside diameter is 11\/16\" which makes them THE highest flowing on the market and they are used in all of our 850-2000rwhp fuel systems. The ends use -8an O-ring threads so there is no need for any thread sealer for a leak proof seal and come equipped with two 1\/8\" NPT ports to supply fuel to a fuel pressure sending unit or a nitrous fuel solenoid. Plugs are included in the case you are not going to utilize the 1\/8\" ports. \u003c\/p\u003e\u003cbr\u003e\u003cstrong\u003eDivisonX 5.0L Fuel Rail Features\u003c\/strong\u003e\u003cbr\u003e-Precision machined from 6061 billet aluminum\u003cbr\u003e-Black anodized finish\u003cbr\u003e-11\/16\" inside diameter (largest available for this application)\u003cbr\u003e-Featured in our 850-2000rwhp complete fuel systems\u003cbr\u003e- -8an O-ring threads\u003cbr\u003e-Two 1\/8\" NPT ports\u003cbr\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48150099132674,"sku":"DX-2250","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/rails.jpg?v=1785025145"},{"product_id":"divisionx-2011-2017-mustang-5-0l-high-flow-fuel-rail-kit","title":"DivisionX 2011-2017 Mustang 5.0L High Flow Fuel Rail Kit","description":"\u003cdiv class=\"p-rich_text_section\"\u003e\n\u003cspan style=\"font-size: small;\"\u003eThese DivisionX fuel rails are compatible with any vehicles that use the 5.0L Coyote engine including the direct injection 2018+ engines. Optional plumbing kits enable you to install these to the OE returnless fuel system.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eFeatures:\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003ePrecision machined billet 6061-T6 aluminium\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eOne piece billet rails\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eHigh Flow 11\/16” bore\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eIncludes 1\/8” NPT ports for the installation of a remote fuel pressure sending unit or gauge and to provide a fuel supply for nitrous injection systems.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003e1\/8\" NPT ports require teflon paste on the fittings to prevent any leaks\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48150106407170,"sku":"DX-COYRAILKIT","price":394.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/p1010036.jpg?v=1785025196"},{"product_id":"divisionx-billet-high-flow-fuel-rails-black-anodized-2018-mustang-gt-2015-2019-shelby-gt350","title":"DivisionX Billet High Flow Fuel Rails - Black Anodized (2018+ Mustang GT \/ 2015-2019 Shelby GT350","description":"\u003cp\u003eAll new at Lethal Performance are the DivisionX 2018+ Mustang GT \/ 2015+ Shelby GT350 high flow billet fuel rails. Made from high quality aluminum and cnc machined to perfection these fuel rails are a direct replacement for the factory fuel rails. Not only can these adapt to your vehicle and be used with the stock fuel system (additional adapter kit purchase required) they're also compatible with aftermarket return style fuel systems.\u003cbr\u003e\n\u003cbr\u003e\nThese new rails have the provision for the 2018+ Mustang GT's high pressure fuel pump as well as the fuel pressure and temperature sensor used on the GT350.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eDivisonX 2018+ GT 5.0L \/ 2015-2019 Shelby GT350 5.2L Billet Fuel Rail Features\u003c\/strong\u003e\u003cbr\u003e\n-Precision machined from 6061 billet aluminum\u003cbr\u003e\n-Black anodized finish\u003cbr\u003e\n-11\/16\" inside diameter (largest available for this application)\u003cbr\u003e\n-Featured in our 850-2000rwhp complete fuel systems\u003cbr\u003e\n-Provision for the High Pressure Fuel Pump feed -Provision for the Fuel Pressure and Temperature Sensor Used on the GT350- -8an O-ring threads\u003cbr\u003e\n-Two 1\/8\" NPT ports\u003cbr\u003e\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48150145171714,"sku":"DX-2250-18","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/18rails.jpg?v=1785025472"},{"product_id":"divisionx-8210-99-04-cobra-mach-1-high-flow-fuel-rails-black-anodized-whipple-kb-vmp-stock-eaton","title":"DivisionX 8210 99-04 Cobra \/ Mach-1 High Flow Fuel Rails (Black Anodized) Whipple \/ KB \/ VMP \/ Stock Eaton","description":"\u003cp\u003e\u003cstrong\u003eDivisionX 99-04 Cobra\/Mach-1 High Flow Fuel Rails (Black Anodized)\u003cbr\u003e\u003c\/strong\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003cbr\u003eFits: 1999-2001 Cobra, 2003-2004 Mach-1, 2003-2004 Cobra with stock Eaton, 2.3l, 2.9l, 3.4l, 4.0L Whipple, 2.2l, 2.4l, 2.6l, 2.8L, KB 2.8L Mammoth, VMP 2.3L, 2.65L Gen3\/Gen3R\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e(KB Mammoth models require slight modification to the bolts heads which hold the baseplate of the blower to the lower intake manifold)\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: \u003cbr\u003e-The divisionX Fuel Rails are sold as the rails only with no fittings. Use the dropdown menu to add the -8an fitting kit which also includes a stock line to aftermarket rail adapter. \u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eAll new at Lethal Performance is another amazing product from our good friends over at divisionX. For some time now we've seen the need for a better fuel rail solution. Up until now the rails available to the market had not fit all applications as well as there were a few applications that required modification for them to fit.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePROBLEM SOLVED!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eAs we worked with divisionX to make a better designed fuel rail the objective was to make a higher quality rail than anyone else which will fit all applications. An example of this is the 2.3L Whipple for the 03-04 Cobras. The plenum on the 2.3L Whipple was designed to flow as much air as possible. In doing so it's quite large and causes interference with aftermarket rails. To this day you would either have to grind the underside of the plenum and rail or run a supercharger spacer to space the Whipple off of the lower manifold creating more room for the rail to clear the plenum. For most no one wants to start grinding their $3000+ supercharger and it's kept many from upgrading their fuel systems. \u003cbr\u003e\u003cbr\u003eWe're proud to say that the divisionX rails do not have to be spaced, ground down or modified to fit any of the aftermarket twin screw blowers. Fitment has been confirmed on: 2.3L, 3.0L, 3.4L, 4.0L Whipple Superchargers \/ 2.2L, 2.4L, 2.6L and 2.8L Kenne Bell blowers. VMP 2.3L, 2.65L Gen3 \/ Gen3R Superchargers.\u003cbr\u003e\u003cbr\u003eThere's more to the divisionX Rails then fitment as they also provide some features that no other rail on the market does. Up until now if you wanted to run an electric fuel pressure gauge you would need a fuel block that mounted in between the aftermarket rail and fuel rail pressure sensor. Same goes for tapping into the rail for a nitrous setup. The additional block is no longer needed with the divisionX Rails as they have 2 ports machined into them already. This allows for you to run the fuel pressure sending unit or nitrous connection by simply screwing the sending unit or NPT fitting into the already machined ports. \u003cbr\u003e\u003cbr\u003eAnother huge feature of the divisionX rail is the actual design. Due to the way some other rails on the market have been designed leaking fuel at the injector can occur. This is because the rails do not sit 100% on top of the injectors. They are mounted to the manifold in a way which tilts the rail on an angle and keeps them from properly sitting on the injector. The angled design compromises a secure fit. \u003cbr\u003e\u003cbr\u003eThe divisionX rails however have a complete uncompromised fit which sits straight on the injector providing a leak proof seal. Not only is this the way the rails should fit on the injectors but when looking at the divisionX rails mounted on the car they are straight and look how they should. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDivisionX Fuel Rail Features:\u003cbr\u003e\u003cbr\u003eThese are the most well conceived fuel rails available for this specific application:\u003cbr\u003e\u003cbr\u003e-OEM positioning, orientation, and size of o-ring seats for injectors.\u003cbr\u003e-Robust bolt on mounts for safe and reliable injector seating. Stainless steel mounting hardware included.\u003cbr\u003e-Fuel Rail Pressure Sensor positioned to not interfere with large case twinscrew superchargers. (i.e. Whipple 3.4L)\u003cbr\u003e-FRPS bank includes a 1\/8\" NPT fitting for remote fuel pressure sending units for in car fuel pressure gauges. Optional block-off available for return style systems.\u003cbr\u003e-Auxilliary connection bank has provisions for locking down a Kenne Bell restrictor orifice for FRPS replacement without fear of losing restrictor orifice.\u003cbr\u003e-Unique low profile design clears inlet of twinscrew superchargers. Overall rail height is the same as the OEM rails WHILE providing a 56% larger bore than the stock fuel rails.\u003cbr\u003e-SAE o-ring boss ports (-8 size) on front and back of both rails.\u003cbr\u003e-Front of rails is truncated to maximize clearance in the front of the rails. Aft of rails are positioned to maximize flexibility of supply\/crossover lines.\u003cbr\u003eThese fuel rails are machined from 6061-T6511 from a solid block of aluminum. There are no welds or caulk to fail.\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e \u003cstrong\u003eNOTE: \u003cbr\u003e-The divisionX Fuel Rails are sold as the rails only with no fittings. Use the dropdown menu to add the -8an fitting kit which also includes a stock line to aftermarket rail adapter. \u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48150237217026,"sku":"DX-8210","price":274.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/newdxrails2.jpg?v=1785026035"},{"product_id":"divisionx-dx-11821-ho-the-box-no-wiring-harness","title":"DivisionX DX-11821-HO The Box (No Wiring Harness)","description":"\u003cp\u003eDivisionX DX-11821-HO The Box (No Wiring Harness)\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48150462464258,"sku":"DX-11821-HO","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/thebox_top_1.jpg?v=1785027278"},{"product_id":"division-x-rail-mount-mech-fuel-pressure-gauge-0-100-psi","title":"DivisionX Liquid Filled Mechanical Fuel Pressure Gauge (0-100 psi)","description":"\u003cp\u003eDivisionX\u003cspan style=\"line-height: 1.5em;\"\u003e 0-100 psi mechanical fuel pressure gauge, popular use is to mount directly to a fuel rail or fuel pressure regulator. Has 1\/8\" NPT male threads.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"line-height: 1.5em;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eConstruction\u003c\/b\u003e \u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5em;\"\u003eCase OD: 1.6\" (40mm) \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5em;\"\u003eBezel OD: 1.75\" (45mm) \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5em;\"\u003e1\/8\" NPT Center Back Connection \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5em;\"\u003eRugged Stainless Steel Case \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5em;\"\u003eBrass Internals \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5em;\"\u003eSilicone Filled for Vibration Dampening \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5em;\"\u003eAcrylic Lens \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5em;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cspan style=\"line-height: 1.5em;\"\u003e\u003cb\u003eAccuracy\u003c\/b\u003e \u003c\/span\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\u003cspan style=\"line-height: 1.5em;\"\u003eANSI Grade 2% of span in the middle of the scale.\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48213751693570,"sku":"DX-00100","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/dx_fuelpressgauge_1_fbfd9f68-b70a-4dcc-8db1-756ad3610afb.jpg?v=1784983428"},{"product_id":"divisionx-efi-standard-return-style-regulator-universal-fit","title":"DivisionX EFI Standard Return Style Regulator (Universal Fit)","description":"\u003cp\u003e\u003cem\u003eEFI\u003c\/em\u003e return style \u003cem\u003eRegulator for Return Style Systems\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBase fuel pressure adjustable from 35-75 PSI.\u003c\/li\u003e\n\u003cli\u003eVacuum\/Boost reference capability.\u003c\/li\u003e\n\u003cli\u003e1:1 rising rate for forced induction engines.\u003c\/li\u003e\n\u003cli\u003eGasoline, ethanol, alcohol and diesel compatible.\u003c\/li\u003e\n\u003cli\u003e2 – ORB -08 inlet\/outlet ports on the sides.\u003c\/li\u003e\n\u003cli\u003e1 – ORB-08 return port on the bottom port.\u003c\/li\u003e\n\u003cli\u003e1 – 1\/8″ NPT Gauge Port with plug.\u003c\/li\u003e\n\u003cli\u003e1\/16″ NPT Boost Port with 5\/32″ hose barb.\u003c\/li\u003e\n\u003cli\u003eCompatible with X1 High Flow EFI Conversion kit.\u003c\/li\u003e\n\u003cli\u003eCompatible with X1 Carb Conversion kit.\u003c\/li\u003e\n\u003cli\u003e0.188″ return style with matching spring and poppet.\u003c\/li\u003e\n\u003cli\u003eHandles up to 150 GPH with AN-08 return line.\u003c\/li\u003e\n\u003cli\u003eSuitable for any Aeromotive Pump up to A1000.\u003c\/li\u003e\n\u003cli\u003eMounting bracket included (not shown).\u003c\/li\u003e\n\u003cli\u003eThis product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48213810118914,"sku":"DX-13306","price":250.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/13306_3.jpg?v=1784987461"},{"product_id":"divisionx-90-degree-fuel-rail-pressure-sensor-relocation","title":"DivisionX 99-04 Mustang 90deg Fuel Rail Pressure Sensor Relocation Fitting","description":"\u003cp\u003eWhen running a large supercharger such as the Whipple 3.4L or 4.0L and aftermarket fuel rail the FRPS can interfere with the side of the large compressor. The DivisionX adapter simply bolts to the fuel rail and relocates the FRPS sensor 90deg off to the side.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #000000; font-size: large;\"\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eCNC Machined Aluminum\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eBlack anodized for a long lasting protective finish\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003e Hardware Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48223252185346,"sku":"DX-0090","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/90_adapters_e3eba018-9831-4abc-875d-1288eacd2300.jpg?v=1785025077"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/collections\/divXhoriz.jpg?v=1787935355","url":"https:\/\/www.lethalperformance.com\/collections\/divisionx.oembed","provider":"Lethal Performance","version":"1.0","type":"link"}