{"title":"DivisionX for 2020-2022 Shelby GT500","description":null,"products":[{"product_id":"divisionx-dx-0711-mustang-triple-pump-fuel-hat-manifold-2011-2023-gt-gt350-2013-2014-shelby-gt500-2015-2023-ecoboost-2020-2022-shelby-gt500-2026-mustang-dark-horse-sc","title":"DivisionX DX-0711 Mustang Triple Pump Fuel Hat Manifold (2011-2023 GT \/ GT350 \/ 2013-2014 Shelby GT500 \/ 2015-2023 Ecoboost \/ 2020-2022 Shelby GT500 \/ 2026 Mustang Dark Horse SC)","description":"\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 2020-2022 Shelby GT500 and 2026 Mustang Dark Horse SC.\u003c\/p\u003e\n\u003cdiv class=\"video-container\"\u003e\u003ciframe frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/O3QTmigSQ3Y\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003eThe DivisionX DX-0711 Triple Pump Fuel Hat Manifold is the ultimate solution for all fueling needs, designed to take up to three 400lph, 465Lph, 485lph, 535lph pumps. The design was also intended to be plug and play, easy to install and reliable with many features to make the transition easier and have you on your way to meeting your power goals.\u003c\/p\u003e\n\u003cp\u003eThe DivisionX Triple Pump Fuel Hat Manifold is the ultimate in upgrades for the fueling system. Accommodating those wanting to run two pumps for a bump in power, to those targeting 1200hp with ethanol – this setup is the all in one solution.\u003c\/p\u003e\n\u003cp\u003eThe design of the fuel system supports up to three 400lph, 465Lph, 485lph, 535lph fuel pumps, delivering more fuel than the more standard 255lph pumps. The pumps are secured with O-rings for optimal height and to isolate vibrations from the aluminum body of the system.\u003c\/p\u003e\n\u003cp\u003eTo cut the cost of upgrading, simplify the amount of parts and eliminate additional plumbing to reduce leaks we have integrated the merge for the three fuel pumps in the hat itself. Ease of installation is always a big concern for our customers and DivisionX is striving to deliver in this department.\u003c\/p\u003e\n\u003cp\u003eAny fuel coming back through the return line is fed down through a ½” stainless steel tube to the bottom of the tank. This helps eliminate aeration of the fuel, providing a more consistent pickup. To further reduce aeration a side port has been incorporated, channeling fuel away from the pump pickup. The supplied O-ring plug blocks off one direction or the other.\u003c\/p\u003e\n\u003cp\u003eReverse engineering using a CMM arm, modeling OE components and with precision CNC manufacturing we are able to make the DivisionX Triple Pump Fuel Hat Manifold as plug and play as possible. We utilize the factory siphon system to extract fuel from the other side of the fuel tank. Necessary features have been CNC milled to mimic OEM design to accommodate the factory level sender, placing it in the exactly the same position as OEM.\u003c\/p\u003e\n\u003cp\u003eThe wiring harness is isolated and sealed from the fuel tank with a proprietary Delrin wire seal. Delrin has one of the highest resistances to fuels of any plastic, so it was chosen to provide a lifetime of trouble free operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCAD\/CAM\/CMM Engineered and manufactured\u003c\/li\u003e\n\u003cli\u003e6061 CNC Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eUp to 3 x 465Lph or 3 x 255Lph pumps, mounted vertically\u003c\/li\u003e\n\u003cli\u003eCompatible with Walbro GSS342, F90000262, F90000267, F90000274, F90000285, F90000295 and Aeromotive 11542 Fuel Pumps\u003c\/li\u003e\n\u003cli\u003eIntegrated merge from all pumps – No need for additional y-block, plumbing\u003c\/li\u003e\n\u003cli\u003eUses OEM siphon\u003c\/li\u003e\n\u003cli\u003e-10 AN Female O Ring Feed\u003c\/li\u003e\n\u003cli\u003e-8 AN Female O Ring Return\u003c\/li\u003e\n\u003cli\u003eLow profile fitment\u003c\/li\u003e\n\u003cli\u003eIntegrated attachment for OEM fuel level sender\u003c\/li\u003e\n\u003cli\u003eHermetically sealed wires with o-ring\u003c\/li\u003e\n\u003cli\u003eHardware, filters, fuel lines, clamps and etc. included to accommodate various configurations\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":47954750898434,"sku":"DX-0711","price":467.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/division_x_hat_3.png?v=1785025038"},{"product_id":"divisionx-dx-0711-wp-mustang-triple-pump-fuel-hat-manifold-with-pumps-2011-2023-mustang-gt-2012-2013-boss-302-2015-2020-gt350-2015-2023-ecoboost-2020-2022-shelby-gt500-2026-mustang-dark-horse-sc","title":"DivisionX DX-0711-WP Mustang Triple Pump Fuel Hat Manifold with Pumps (2011-2023 Mustang GT \/ 2012-2013 Boss 302 \/ 2015-2020 GT350 \/ 2015-2023 Ecoboost \/ 2020-2022 Shelby GT500 \/ 2026 Mustang Dark Horse SC)","description":"\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 2020-2022 Shelby GT500 and 2026 Mustang Dark Horse SC.\u003c\/p\u003e\n\u003cdiv class=\"video-container\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/O3QTmigSQ3Y\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003eThe DivisionX Triple Pump Fuel Hat Manifold is the ultimate solution for all fueling needs, designed to take up to three 400lph, 465Lph, 485lph, 535lph pumps. The design was also intended to be plug and play, easy to install and reliable with many features to make the transition easier and have you on your way to meeting your power goals.\u003c\/p\u003e\n\u003cp\u003eThe DivisionX Triple Pump Fuel Hat Manifold is the ultimate in upgrades for the fueling system. Accommodating those wanting to run two pumps for a bump in power, to those targeting 1200hp with ethanol – this setup is the all in one solution.\u003c\/p\u003e\n\u003cp\u003eThe design of the fuel system supports up to three 400lph, 465Lph, 485lph, 535lph fuel pumps, delivering more fuel than the more standard 255lph pumps. The pumps are secured with O-rings for optimal height and to isolate vibrations from the aluminum body of the system.\u003c\/p\u003e\n\u003cp\u003eTo cut the cost of upgrading, simplify the amount of parts and eliminate additional plumbing to reduce leaks we have integrated the merge for the three fuel pumps in the hat itself. Ease of installation is always a big concern for our customers and DivisionX is striving to deliver in this department.\u003c\/p\u003e\n\u003cp\u003eAny fuel coming back through the return line is fed down through a ½” stainless steel tube to the bottom of the tank. This helps eliminate aeration of the fuel, providing a more consistent pickup. To further reduce aeration a side port has been incorporated, channeling fuel away from the pump pickup. The supplied O-ring plug blocks off one direction or the other.\u003c\/p\u003e\n\u003cp\u003eReverse engineering using a CMM arm, modeling OE components and with precision CNC manufacturing we are able to make the DivisionX Triple Pump Fuel Hat Manifold as plug and play as possible. We utilize the factory siphon system to extract fuel from the other side of the fuel tank. Necessary features have been CNC milled to mimic OEM design to accommodate the factory level sender, placing it in the exactly the same position as OEM.\u003c\/p\u003e\n\u003cp\u003eThe wiring harness is isolated and sealed from the fuel tank with a proprietary Delrin wire seal. Delrin has one of the highest resistances to fuels of any plastic, so it was chosen to provide a lifetime of trouble free operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCAD\/CAM\/CMM Engineered and manufactured\u003c\/li\u003e\n\u003cli\u003e6061 CNC Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eUp to 3 x 400lph\/ 465lph \/ 485lph \/ 535lph or 3 x 255Lph pumps, mounted vertically\u003c\/li\u003e\n\u003cli\u003eIntegrated merge from all pumps – No need for additional y-block, plumbing\u003c\/li\u003e\n\u003cli\u003eUses OEM siphon\u003c\/li\u003e\n\u003cli\u003e-10 AN Female O Ring Feed\u003c\/li\u003e\n\u003cli\u003e-8 AN Female O Ring Return\u003c\/li\u003e\n\u003cli\u003eLow profile fitment\u003c\/li\u003e\n\u003cli\u003eIntegrated attachment for OEM fuel level sender\u003c\/li\u003e\n\u003cli\u003eHermetically sealed wires with o-ring\u003c\/li\u003e\n\u003cli\u003eHardware, filters, fuel lines, clamps and etc. included to accommodate various configurations\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":47954750931202,"sku":"DX-0711-WP","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/s197hat_w_pumps.jpg?v=1785025038"},{"product_id":"divisionx-dx-11821-the-box-dual-triple-pump-staged-fuel-pump-controller","title":"DivisionX DX-11821 The Box Dual \/ Triple Pump Staged Fuel Pump Controller","description":"\u003cdiv\u003e\u003ca href=\"https:\/\/www.lethalperformance.com\/info\/thebox\/\" target=\"_blank\"\u003eCHECK OUT OUR FULL WRITEUP ON THE BOX!\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003eThe DivisionX Box is a universal wiring solution for return style fuel systems running up to three fuel pumps.\u003cbr\u003e\nThe Box allows you to run 3 pumps at all time or staged with a Hobbs \/ Pressure switch. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003cbr\u003e\nRelays are rated at 50 amps (typical fuel pump relays are rated 30 to 40 amps)\u003cbr\u003e\nCircuitry uses \"Plug And Play\" design.\u003cbr\u003e\nThree integrated 30 amp replaceable fuses.\u003cbr\u003e\nStatus LEDs on relay OUTPUTS. Inline 80amp Fuse for main power wire to controller\u003cbr\u003e\nRun one, two or three fuel pumps full time or with remaining pumps activated on demand with an external hobbs\/pressure switch\u003cbr\u003e\n4 Gauge Main Power Wire\u003cbr\u003e\n12 Gauge wiring from Controller Box to Pumps\u003cbr\u003e\nOEM 6 Pin Connector for Plug and Play compatibility with all DivisionX Fuel Hats\u003cbr\u003e\nFuel pump trigger system works with switched 12V+ on\/off (9V+ minimum) High Current APP connectors for main power and ground to controller\u003cbr\u003e\nPositive trigger inputs using plug-in miniature connection: 10 to 16 VDC:\u003cbr\u003e\n1- powers pump 1\u003cbr\u003e\n2- powers pumps 2 and 3\u003cbr\u003e\nIntegrated SB connector rated at 50 amps\u003cbr\u003e\nIndividual fuel pump output connectors for each relay.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\nDivision X The Box Fuel Pump Controller\u003cbr\u003e\n15ft 4 AWG Power \/ Ground Wire\u003cbr\u003e\n4 AWG Ring Terminals\u003cbr\u003e\n7ft 12 AWG for 3 Fuel Pumps with Plug and Play Connector\u003cbr\u003e\nIn-Line Fuse Holder with 80amp Fuse (Main Power to Controller)\u003cbr\u003e\n15ft Wiring Harness for Pump Trigger \/ Hobbs \/ Pressure Switch\u003cbr\u003e\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":47954753093890,"sku":"DX-11821","price":228.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/dx-11821.jpg?v=1785026052"},{"product_id":"divisionx-high-flow-10-micron-fuel-filter-47538","title":"DivisionX 10 Micron High Flow Fuel Filter with Stainless Steel Element (E-85 and other ethanol based fuels)","description":"When it comes to fuel systems choosing a high quality fuel filter is definitely a must. It's a simple step towards protecting your injectors and ultimately your engine.  The DivisionX fuel filters are made from high grade CNC machined aluminum and feature O-ring seals on each end. The paper filter element is provided to us by an industry leader and is designed to work with gasoline, race fuels and ethanol based fuels such as E-85, E-98 and E-100.\u003cbr\u003eEach filter housing accepts -10an ORB Fittings\u003cstrong\u003e (Sold Separately)\u003c\/strong\u003e and the filters are replaceable. \u003cbr\u003e \u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eCompact Design (2\" Wide and 5-1\/2\" Long)\u003c\/li\u003e\n\u003cli\u003eBright Dip Black Anodized Finish provides a long lasting protective finish\u003c\/li\u003e\n\u003cli\u003e10 Micron Stainless Steel Wire Mesh Filter Element (Compatible with gasoline, race fuels and ethanol based fuels such as E-85, E-98 and E-100)\u003c\/li\u003e\n\u003cli\u003eAccepts -10an ORB fittings.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":47954753585410,"sku":"DX-0010MW","price":93.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/filteropen_1_1.jpg?v=1785025091"},{"product_id":"divisionx-large-marge-10-micron-high-flow-fuel-filter-microglass-element-e85-compatible","title":"DivisionX Large Marge 10 Micron High Flow Fuel Filter (MicroGlass Element \/ E85 Compatible)","description":"When it comes to fuel systems choosing a high quality fuel filter is definitely a must. It's a simple step towards protecting your injectors and ultimately your engine. The DivisionX fuel filters are made from high grade CNC machined aluminum and feature O-ring seals on each end. \u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eDivisionX Large Marge Fuel Filter Features:\u003c\/strong\u003e\u003cbr\u003e\n6.5\" x 2.75\" Diameter\u003cbr\u003e\nEach filter housing accepts -10an ORB Fittings\u003cbr\u003e\n10 Micron MicroGlass Filter Element\u003cbr\u003e\nFully Serviceable\u003cbr\u003e\nBright Dip Black Anodized for a long lasting protective finish\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\u003cstrong\u003eIncludes: \u003cbr\u003e\n(1) Filter Housing Assembly \u003cbr\u003e\n(1) MicroGlass Filter Element\u003c\/strong\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":47954753782018,"sku":"DX-0020LM-MG","price":93.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/largemarge_withelements_1.jpg?v=1784989452"},{"product_id":"divisionx-large-marge-10-micron-high-flow-fuel-filter-stainless-steel-element-e85-compatible","title":"DivisionX Large Marge 10 Micron High Flow Fuel Filter (Stainless Steel Element \/ E85 Compatible)","description":"When it comes to fuel systems choosing a high quality fuel filter is definitely a must. It's a simple step towards protecting your injectors and ultimately your engine. The DivisionX fuel filters are made from high grade CNC machined aluminum and feature O-ring seals on each end. \u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eDivisionX Large Marge Fuel Filter Features:\u003c\/strong\u003e\u003cbr\u003e\n6.5\" x 2.75\" Diameter\u003cbr\u003e\nEach filter housing accepts -10an ORB Fittings\u003cbr\u003e\n10 Micron Stainless Steel Filter Element\u003cbr\u003e\nFully Serviceable\u003cbr\u003e\nBright Dip Black Anodized for a long lasting protective finish\u003cbr\u003e\n\n\u003cbr\u003e\u003cstrong\u003eIncludes: \u003cbr\u003e\n(1) Filter Housing Assembly \u003cbr\u003e\n(1) Stainless Steel Filter Element\u003c\/strong\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":47954753650946,"sku":"DX-0020LM-SS","price":109.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/largemarge_withstandard_notext.jpg?v=1784989452"},{"product_id":"divisionx-dx-5200-kit-billet-high-flow-fuel-rail-kit-2020-2022-5-2l-shelby-gt500-2026-mustang-dark-horse-sc","title":"DivisionX DX-5200-KIT Billet High Flow Fuel Rail Kit (2020-2022 5.2L Shelby GT500 \/ 2026 Mustang Dark Horse SC)","description":"\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 2020-2022 Shelby GT500 and 2026 Mustang Dark Horse SC.\u003c\/p\u003e\n\u003cdiv class=\"video-container\"\u003e\u003ciframe frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/fEUZUzPGMY8\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003eAll new for the Ford 2020-2022 5.2L Shelby GT500 are the DivisionX billet high flow fuel rails. When making more power on your GT500 or running other fuel types such as E85 we have seen pressure drops at the fuel rails when using the stock rails. This is due to the poor crossover design of the factory fuel rails. We designed our new billet fuel rails to not only fix this issue but to give you a better looking engine bay as well. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e This is the complete fuel rail kit for your 2020-2022 Shelby GT500 and comes with the fuel rails as well as all necessary hoses, fittings and adapters to install on your car using the factory fuel line feed. \u003cbr\u003e All of the hoses in this kit are pre-assembled Fragola PTFE hose. The Fragola PTFE hose prevents any fuel smell unlike other non PTFE hoses. The Fragola PFTE hose consists of an inner PTFE lining which is covered in a stainless braid and then has a black plastic protective sheath on it. This not only gives the hose a much stealthier look but also prevents any type of scratching to your vehicle from a stainless braided hose. \u003cbr\u003e\u003cbr\u003e The DivisionX 2020-2022 Shelby GT500 fuel rails feature -8an ports on each end the rail and have the provision for the stock fuel line. They also come with an additional 1\/8\" NPT port for either a fuel pressure gauge, sending unit or wet nitrous system connection. High strength mounting tabs and hardware also included. \u003cbr\u003e\u003cbr\u003e The DivisionX 2020-2022 GT500 fuel rails can be purchased alone or with the hose and adapter kit. \u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eFuel Rail Kit Features:\u003c\/strong\u003e\u003cbr\u003e Black Anodized\u003cbr\u003e 6061 CNC Billet Aluminum\u003cbr\u003e -8 AN o-ring ports\u003cbr\u003e High Strength Mounting tabs \u003cbr\u003e Direct OEM replacement \/mounting\u003cbr\u003e Attachment for OEM fuel pressure sensor\u003cbr\u003e All Necessary Lines, Fittings and Adapters to Connect to the Factory Fuel Line\u003cbr\u003e Fragola Pre-Assembled PTFE Hose\u003cbr\u003e 1\/8\" NPT plug included\u003cbr\u003e Made in the U.S.A.\u003cbr\u003e Lifetime Warranty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck out our full write-up \u003ca href=\"https:\/\/www.lethalperformance.com\/info\/gt500rails\" target=\"_blank\"\u003eHERE!\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48139425284354,"sku":"DX-202052-KIT","price":373.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/2020gt500rails_kit3_1.jpg?v=1784939934"},{"product_id":"divisionx-high-flow-10-micron-fuel-filter-element-wire-washable","title":"DivisionX 10 Micron Wire Mesh Washable Replacement Filter Element (E85 and Flex Fuels)","description":"\u003cp\u003eReplacement 10 Micron Wire Mesh Washable Replacement Filter Element (E85 and Flex Fuels)Recommended for use with E-85 and Flex FuelsThis filter element can be washed and re-used.\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48141325304066,"sku":"DX-10MW","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/dx-10mw.jpg?v=1784983493"},{"product_id":"divisionx-dx-5200-billet-high-flow-fuel-rails-2020-2022-5-2l-shelby-gt500-2026-mustang-dark-horse-sc","title":"DivisionX DX-5200 Billet High Flow Fuel Rails (2020-2022 5.2L Shelby GT500 \/ 2026 Mustang Dark Horse SC)","description":"\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 2020-2022 Shelby GT500 and 2026 Mustang Dark Horse SC.\u003c\/p\u003e\n\u003cdiv class=\"video-container\"\u003e\u003ciframe frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/fEUZUzPGMY8\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003eAll new for the Ford 2020-2022 5.2L Shelby GT500 are the DivisionX billet high flow fuel rails. When making more power on your GT500 or running other fuel types such as E85 we have seen pressure drops at the fuel rails when using the stock rails. This is due to the poor crossover design of the factory fuel rails. We designed our new billet fuel rails to not only fix this issue but to give you a better looking engine bay as well. \u003cbr\u003e\u003cbr\u003eThe DivisionX 2020-2022 Shelby GT500 fuel rails feature -8an ports on each end the rail and have the provision for the stock fuel line. They also come with an additional 1\/8\" NPT port for either a fuel pressure gauge, sending unit or wet nitrous system connection. High strength mounting tabs and hardware also included. \u003cbr\u003e\u003cbr\u003eThe DivisionX 2020-2022 GT500 fuel rails can be purchased alone or with the hose and adapter kit. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFuel Rail Features:\u003c\/strong\u003e\u003cbr\u003eBlack Anodized\u003cbr\u003e6061 CNC Billet Aluminum\u003cbr\u003e-8 AN o-ring ports\u003cbr\u003eHigh Strength Mounting tabs \u003cbr\u003eDirect OEM replacement \/mounting\u003cbr\u003eAttachment for OEM fuel pressure sensor\u003cbr\u003e1\/8\" NPT plug included\u003cbr\u003eMade in the U.S.A.\u003cbr\u003eLifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck out our full write-up \u003ca href=\"https:\/\/www.lethalperformance.com\/info\/gt500rails\" target=\"_blank\"\u003eHERE!\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48141591052546,"sku":"DX-202052","price":225.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/2020gt500rails.jpg?v=1784985238"},{"product_id":"divisionx-extreme-flow-2-port-efi-regulator-universal-fit","title":"DivisionX Extreme Flow 2-Port EFI Regulator (Universal Fit)","description":"\u003cp\u003e\u003cem\u003e30-75 PSI and 75-125 PSI Base Pressure Range\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for Mechanical pumps up to 5.0 GPM.\u003c\/li\u003e\n\u003cli\u003eCompact, 2-Port Body with dual AN-10 inlet\/outlet ports and one AN-10 return port.\u003c\/li\u003e\n\u003cli\u003eHigh Flow 0.313″ Valve\/Seat, optimized for larger electric fuel pumps in the 2.5-5.0 GPM flow range.\u003c\/li\u003e\n\u003cli\u003eDual Springs expand pressure range while maintaining a low profile and reduced weight.\n\u003cul\u003e\n\u003cli\u003eStandard spring (installed) supports 30-75 PSI base fuel pressure.\u003c\/li\u003e\n\u003cli\u003eHigh Pressure spring (included) supports 75-120 PSI base fuel pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSystems where an electric pump is desired and where base pressure exceeds 70-PSI should run two pumps of similar flow rate, in series.\u003c\/li\u003e\n\u003cli\u003eThis product is not legal for sale or use on emission-controlled vehicles except when used on a dedicated race vehicle.\u003c\/li\u003e\n\u003cli\u003eVacuum and boost reference on a 1:1 ratio.\u003c\/li\u003e\n\u003cli\u003eCompatible with gasoline, ethanol and methanol.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48142047084802,"sku":"DX-13143","price":221.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/13143_2.jpg?v=1784987461"},{"product_id":"divisionx-pro-series-efi-fuel-pressure-regulator-universal-fit","title":"DivisionX Pro-Series EFI Fuel Pressure Regulator (Universal Fit)","description":"\u003cp\u003eThe tuners choice for high horsepower EFI applications. The Pro-Series Regulator can support up to 2000 HP. For engines requiring high volume, high pressure fuel delivery the Pro-Series Boost Reference EFI Regulator is a perfect fit for serious power.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable base pressure from 30-60 PSI.\u003c\/li\u003e\n\u003cli\u003eAuxiliary ports available for nitrous applications, pressure gauges and transducers.\u003c\/li\u003e\n\u003cli\u003eReferences Vacuum\/Boost on a 1:1 ratio. Includes two boost line adapters, one barbed for rubber hose, the other for AN-04 braided line. (Prevents blow-off in high boost applications)\u003c\/li\u003e\n\u003cli\u003eDedicated 1\/8 NPT port.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eIncludes Aeromotives radiused tapered flare fittings:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(3) ORB-08 and (1) ORB-10 inlet ports, two with AN-08 flare adapters.\u003c\/li\u003e\n\u003cli\u003e(1) ORB-10 return port with AN-10 flare adapter port plugs included.\u003c\/li\u003e\n\u003cli\u003eVirtually indestructible electroless nickel-plating finish on the body with type II bright dip black anodized cap.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48142047314178,"sku":"DX-13142","price":340.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/aer-13110_1_1.jpg?v=1784987462"},{"product_id":"divisionx-efi-pro-return-style-regulator-universal-fit","title":"DivisionX EFI Pro Return Style Regulator (Universal Fit)","description":"\u003cp\u003e\u003cem\u003eEFI\u003c\/em\u003e return style\u003cem\u003e Regulator for Return Style Systems\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBase fuel pressure adjustable from 35-75 PSI.\u003c\/li\u003e\n\u003cli\u003eVacuum\/Boost reference capability.\u003c\/li\u003e\n\u003cli\u003e1:1 rising rate for forced induction engines.\u003c\/li\u003e\n\u003cli\u003eGasoline, ethanol, alcohol and diesel compatible.\u003c\/li\u003e\n\u003cli\u003e2 – ORB -08 inlet\/outlet ports on the sides.\u003c\/li\u003e\n\u003cli\u003e1 – ORB-08 return port on the bottom port.\u003c\/li\u003e\n\u003cli\u003e1 – 1\/8″ NPT Gauge Port with plug.\u003c\/li\u003e\n\u003cli\u003e1\/16″ NPT Boost Port with 5\/32″ hose barb.\u003c\/li\u003e\n\u003cli\u003eCompatible with X1 EFI Conversion kit.\u003c\/li\u003e\n\u003cli\u003eCompatible with X1 Carb Conversion kit.\u003c\/li\u003e\n\u003cli\u003e0.313″ return style with matching spring and poppet.\u003c\/li\u003e\n\u003cli\u003eHandles up to 250 GPH with AN-08 return line.\u003c\/li\u003e\n\u003cli\u003eMounting bracket included (not shown).\u003c\/li\u003e\n\u003cli\u003eThis product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48142047412482,"sku":"DX-13307","price":212.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/13306_3_1.jpg?v=1784987462"},{"product_id":"swift-filters-10-micron-wire-mesh-filter-1-020-id-x-1-75-od-x-4-437-062-00-oal-single-open-end-viton-o-ring-seal","title":"DivisionX 10 Micron Wire Mesh Filter - 1.020\" ID X 1.75\" OD X 4.437\" +.062 (-.00)\" OAL, Single Open End, Viton O-Ring Seal (Fits DivisionX Large Marge Filters)","description":"\u003cp\u003e\u003cspan style=\"font-family: 'Arial,Helvetica,sans-serif'; font-size: small; color: rgb(34, 34, 34); background-color: rgb(255, 255, 255);\"\u003e10 Micron Wire Mesh Filter -\u003c\/span\u003e \u003cspan style=\"font-family: 'Arial,Helvetica,sans-serif'; font-size: small; color: rgb(34, 34, 34); background-color: rgb(255, 255, 255);\"\u003e1.020\" ID X 1.75\" OD X 4.437\" +.062 (-.00)\" OAL, Single Open End, Viton O-Ring Seal\u003c\/span\u003e\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48143231353090,"sku":"DX-SF6235-4A-010UWV","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/screen_shot_2022-02-23_at_5.20.24_pm.png?v=1784993842"},{"product_id":"swift-filters-12-micron-pleated-microglass-1-020-id-x-1-75-od-x-4-437-062-00-oal","title":"DivisionX Filter Element 12 Micron Pleated Microglass - 1.020\" ID X 1.75\" OD X 4.437\" +.062 (-.00)\" OAL (Fits DivisionX Large Marge Filters)","description":"\u003cp style=\"margin-bottom: 0px;\"\u003e12 Micron Pleated Microglass - 1.020\" ID X 1.75\" OD X 4.437\" +.062 (-.00)\" OAL\u003c!--EndFragment--\u003e\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48143231484162,"sku":"DX-SF6235-4A-012UMV","price":42.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/p7_9020-4mg.jpg?v=1784993843"},{"product_id":"lethal-performance-2020-shelby-gt500-5-2l-return-style-fuel-system-2026-mustang-dark-horse-sc","title":"2020-2022 Shelby GT500 \/ 2026 Mustang Dark Horse SC 5.2L Return Style Fuel System","description":"\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 2020-2022 Shelby GT500 and 2026 Mustang Dark Horse SC.\u003c\/p\u003e\n\u003cp\u003eThe all new 2020-2022 Shelby GT500 is here! As we've seen these cars make some crazy power right from the factory. Add E85, a custom tune, griptec pulley and some exhaust and these things are cracking 900+rwhp at ease. Although the factory fuel system is a dual pump system and with some larger injectors can support some decent HP levels we know there's the Lethal type customer that's wanting to push the limits even further. \u003cbr\u003e\u003cbr\u003eThis is why we developed our Lethal Performance 2020-2022 Shelby GT500 return style fuel system. Our systems come as dual pump setups with the option to add a third pump. So depending on the HP level you're wanting to support you can build your kit to suite your specific needs. \u003cbr\u003e\u003cbr\u003eThe system uses a set of the DivisionX billet Coyote fuel rails and is run in a traditional style routing for the hoses. We accomplish this by using a Y-block at the end of the main feed line which then feeds each aftermarket fuel rail from the rear. We then leave each rail from the front and feed the Aeromotive X1 Series Pro EFI Bypass Regulator where the fuel is regulated and then returned to the tank. \u003cbr\u003e\u003cbr\u003eUtilizing the DivisionX S197-C billet fuel hat as the systems backbone you can run up to 3 pumps based on what type of power you're looking to support and what fuel you'll be using, and we're including our plug and play triple pump harness in your kit regardless of how many pumps you start with! We then run a 10an feed line to our aftermarket fuel filter, into a Y-Block, and straight to the back of the DivisionX fuel rails.  Our full return system uses all Fragola PTFE fuel hoses which are pre-assembled and won't leak or smell of fuel. \u003cbr\u003e\u003cbr\u003eWhy go with this system as opposed to others that use a factory style fuel hat and pump setup? This system has much more capability than other kits on the market and as mentioned can easily begin or be upgraded to a triple pump setup. Our competitors systems are stuck using only 2 inferior fuel pumps where this system has the option to use up to three of the top notch pump offerings from Walbro.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included?:\u003c\/strong\u003e\u003cbr\u003eDivisonX S197-C Triple Pump Fuel Hat\u003cbr\u003eDivisionX Billet Shelby GT500 Fuel Rails\u003cbr\u003eAeromotive X1 Series Pro EFI Bypass Regulator 250gph (with fuel pressure gauge)\u003cbr\u003eDivisionX Triple Pump Return Style Wiring Harness\u003cbr\u003eDivisionX High Flow Fuel Filter (Stainless Washable E85 Compatible Element Optional)\u003cbr\u003eWalbro F90000267 465lph E85 Approved Fuel Pumps (upgradable)\u003cbr\u003eFragola Pre-Assembled PTFE Feed and Return Lines\u003cbr\u003eAll Fittings and Hardware Needed for Installation\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNote:\u003c\/p\u003e\n\u003cp\u003eWhen using the DivX fuel system on a stock lid 2020-2022 GT500 blower, there is no boost\/vac reference needed. Please set the regulator to 70psi and leave the port open or cap it off. The lack of a boost reference source makes a hobbs switch unavailable while using the stock lid.\u003c\/p\u003e\n\u003cp\u003eLooking for instructions? \u003ca href=\"https:\/\/www.lethalperformance.com\/pages\/fuel-system-installation-instructions\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e","brand":"Lethal Performance","offers":[{"title":"Default Title","offer_id":48150234431746,"sku":"LP-FS-2020GT500","price":1954.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/2020gt500system.jpg?v=1785026012"}],"url":"https:\/\/www.lethalperformance.com\/collections\/divisionx-2020-2022-gt500.oembed","provider":"Lethal Performance","version":"1.0","type":"link"}