{"title":"DivisionX for 2015-2023 Mustang","description":null,"products":[{"product_id":"divisionx-dx-0711-mustang-triple-pump-fuel-hat-manifold-2011-2023-gt-gt350-2013-2014-shelby-gt500-2015-2023-ecoboost-2020-2022-shelby-gt500-2026-mustang-dark-horse-sc","title":"DivisionX DX-0711 Mustang Triple Pump Fuel Hat Manifold (2011-2023 GT \/ GT350 \/ 2013-2014 Shelby GT500 \/ 2015-2023 Ecoboost \/ 2020-2022 Shelby GT500 \/ 2026 Mustang Dark Horse SC)","description":"\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 2020-2022 Shelby GT500 and 2026 Mustang Dark Horse SC.\u003c\/p\u003e\n\u003cdiv class=\"video-container\"\u003e\u003ciframe frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/O3QTmigSQ3Y\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003eThe DivisionX DX-0711 Triple Pump Fuel Hat Manifold is the ultimate solution for all fueling needs, designed to take up to three 400lph, 465Lph, 485lph, 535lph pumps. The design was also intended to be plug and play, easy to install and reliable with many features to make the transition easier and have you on your way to meeting your power goals.\u003c\/p\u003e\n\u003cp\u003eThe DivisionX Triple Pump Fuel Hat Manifold is the ultimate in upgrades for the fueling system. Accommodating those wanting to run two pumps for a bump in power, to those targeting 1200hp with ethanol – this setup is the all in one solution.\u003c\/p\u003e\n\u003cp\u003eThe design of the fuel system supports up to three 400lph, 465Lph, 485lph, 535lph fuel pumps, delivering more fuel than the more standard 255lph pumps. The pumps are secured with O-rings for optimal height and to isolate vibrations from the aluminum body of the system.\u003c\/p\u003e\n\u003cp\u003eTo cut the cost of upgrading, simplify the amount of parts and eliminate additional plumbing to reduce leaks we have integrated the merge for the three fuel pumps in the hat itself. Ease of installation is always a big concern for our customers and DivisionX is striving to deliver in this department.\u003c\/p\u003e\n\u003cp\u003eAny fuel coming back through the return line is fed down through a ½” stainless steel tube to the bottom of the tank. This helps eliminate aeration of the fuel, providing a more consistent pickup. To further reduce aeration a side port has been incorporated, channeling fuel away from the pump pickup. The supplied O-ring plug blocks off one direction or the other.\u003c\/p\u003e\n\u003cp\u003eReverse engineering using a CMM arm, modeling OE components and with precision CNC manufacturing we are able to make the DivisionX Triple Pump Fuel Hat Manifold as plug and play as possible. We utilize the factory siphon system to extract fuel from the other side of the fuel tank. Necessary features have been CNC milled to mimic OEM design to accommodate the factory level sender, placing it in the exactly the same position as OEM.\u003c\/p\u003e\n\u003cp\u003eThe wiring harness is isolated and sealed from the fuel tank with a proprietary Delrin wire seal. Delrin has one of the highest resistances to fuels of any plastic, so it was chosen to provide a lifetime of trouble free operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCAD\/CAM\/CMM Engineered and manufactured\u003c\/li\u003e\n\u003cli\u003e6061 CNC Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eUp to 3 x 465Lph or 3 x 255Lph pumps, mounted vertically\u003c\/li\u003e\n\u003cli\u003eCompatible with Walbro GSS342, F90000262, F90000267, F90000274, F90000285, F90000295 and Aeromotive 11542 Fuel Pumps\u003c\/li\u003e\n\u003cli\u003eIntegrated merge from all pumps – No need for additional y-block, plumbing\u003c\/li\u003e\n\u003cli\u003eUses OEM siphon\u003c\/li\u003e\n\u003cli\u003e-10 AN Female O Ring Feed\u003c\/li\u003e\n\u003cli\u003e-8 AN Female O Ring Return\u003c\/li\u003e\n\u003cli\u003eLow profile fitment\u003c\/li\u003e\n\u003cli\u003eIntegrated attachment for OEM fuel level sender\u003c\/li\u003e\n\u003cli\u003eHermetically sealed wires with o-ring\u003c\/li\u003e\n\u003cli\u003eHardware, filters, fuel lines, clamps and etc. included to accommodate various configurations\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":47954750898434,"sku":"DX-0711","price":467.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/division_x_hat_3.png?v=1785025038"},{"product_id":"divisionx-dx-0711-wp-mustang-triple-pump-fuel-hat-manifold-with-pumps-2011-2023-mustang-gt-2012-2013-boss-302-2015-2020-gt350-2015-2023-ecoboost-2020-2022-shelby-gt500-2026-mustang-dark-horse-sc","title":"DivisionX DX-0711-WP Mustang Triple Pump Fuel Hat Manifold with Pumps (2011-2023 Mustang GT \/ 2012-2013 Boss 302 \/ 2015-2020 GT350 \/ 2015-2023 Ecoboost \/ 2020-2022 Shelby GT500 \/ 2026 Mustang Dark Horse SC)","description":"\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 2020-2022 Shelby GT500 and 2026 Mustang Dark Horse SC.\u003c\/p\u003e\n\u003cdiv class=\"video-container\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/O3QTmigSQ3Y\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003eThe DivisionX Triple Pump Fuel Hat Manifold is the ultimate solution for all fueling needs, designed to take up to three 400lph, 465Lph, 485lph, 535lph pumps. The design was also intended to be plug and play, easy to install and reliable with many features to make the transition easier and have you on your way to meeting your power goals.\u003c\/p\u003e\n\u003cp\u003eThe DivisionX Triple Pump Fuel Hat Manifold is the ultimate in upgrades for the fueling system. Accommodating those wanting to run two pumps for a bump in power, to those targeting 1200hp with ethanol – this setup is the all in one solution.\u003c\/p\u003e\n\u003cp\u003eThe design of the fuel system supports up to three 400lph, 465Lph, 485lph, 535lph fuel pumps, delivering more fuel than the more standard 255lph pumps. The pumps are secured with O-rings for optimal height and to isolate vibrations from the aluminum body of the system.\u003c\/p\u003e\n\u003cp\u003eTo cut the cost of upgrading, simplify the amount of parts and eliminate additional plumbing to reduce leaks we have integrated the merge for the three fuel pumps in the hat itself. Ease of installation is always a big concern for our customers and DivisionX is striving to deliver in this department.\u003c\/p\u003e\n\u003cp\u003eAny fuel coming back through the return line is fed down through a ½” stainless steel tube to the bottom of the tank. This helps eliminate aeration of the fuel, providing a more consistent pickup. To further reduce aeration a side port has been incorporated, channeling fuel away from the pump pickup. The supplied O-ring plug blocks off one direction or the other.\u003c\/p\u003e\n\u003cp\u003eReverse engineering using a CMM arm, modeling OE components and with precision CNC manufacturing we are able to make the DivisionX Triple Pump Fuel Hat Manifold as plug and play as possible. We utilize the factory siphon system to extract fuel from the other side of the fuel tank. Necessary features have been CNC milled to mimic OEM design to accommodate the factory level sender, placing it in the exactly the same position as OEM.\u003c\/p\u003e\n\u003cp\u003eThe wiring harness is isolated and sealed from the fuel tank with a proprietary Delrin wire seal. Delrin has one of the highest resistances to fuels of any plastic, so it was chosen to provide a lifetime of trouble free operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCAD\/CAM\/CMM Engineered and manufactured\u003c\/li\u003e\n\u003cli\u003e6061 CNC Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eUp to 3 x 400lph\/ 465lph \/ 485lph \/ 535lph or 3 x 255Lph pumps, mounted vertically\u003c\/li\u003e\n\u003cli\u003eIntegrated merge from all pumps – No need for additional y-block, plumbing\u003c\/li\u003e\n\u003cli\u003eUses OEM siphon\u003c\/li\u003e\n\u003cli\u003e-10 AN Female O Ring Feed\u003c\/li\u003e\n\u003cli\u003e-8 AN Female O Ring Return\u003c\/li\u003e\n\u003cli\u003eLow profile fitment\u003c\/li\u003e\n\u003cli\u003eIntegrated attachment for OEM fuel level sender\u003c\/li\u003e\n\u003cli\u003eHermetically sealed wires with o-ring\u003c\/li\u003e\n\u003cli\u003eHardware, filters, fuel lines, clamps and etc. included to accommodate various configurations\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":47954750931202,"sku":"DX-0711-WP","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/s197hat_w_pumps.jpg?v=1785025038"},{"product_id":"lethal-performance-2011-2017-mustang-gt-level-1-return-style-fuel-system","title":"2011-2017 Mustang GT Level 1 Return Style Fuel System (Stock Manifold \/ Front Feed Whipple)","description":"\u003cdiv class=\"video-container\"\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/46awzbN61Bc\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003eAre you running out of fuel with your current combo or simply looking to support more power or different fuel types without breaking the bank? We've got the solution for you. The all new Level 1 Return style fuel system for your 2011-2017 Ford Mustang GT is exactly what you need. Not only does this kit have the ability to work with your stock fuel rails but has the ability to be upgraded later on. So if you're looking to add an additional pump or some aftermarket fuel rails at a later date the Level 1 Return system has that flexibility.\u003cbr\u003e\u003cbr\u003eUtilizing the DivisionX S197-C billet fuel hat as the systems backbone you can run up to 3 pumps based on what type of power you're looking to support and what fuel you'll be using. We then run a 8an feed line to our aftermarket fuel filter and from there the Aeromotive X1 Series EFI bypass regulator. From there we feed the stock fuel rail with an OEM adapter. Fuel is returned to the fuel tank with a 6an return hose off of the regulator. Our Level 1 system uses all Fragola PTFE fuel hoses which are pre-assembled and won't leak or smell of fuel. Included in this system is our dual pump return style wiring harness which is plug and play with the DivisionX S197-C fuel hat. The triple pump wiring harness is available as an upgrade for those looking to run 3 pumps.\u003cbr\u003e\u003cbr\u003eWhy go with this system as opposed to others that use a factory style fuel hat and pump setup? This system has much more capability than other kits on the market and as mentioned can easily be upgraded to a triple pump setup or with aftermarket fuel rails. Our competitors are stuck using only 2 inferior fuel pumps where this system has the option to use one of many of the top notch pump offerings from Walbro.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included?:\u003c\/strong\u003e\u003cbr\u003eDivisonX S197-C Triple Pump Fuel Hat\u003cbr\u003eAeromotive X1 Series EFI Bypass Regulator (with fuel pressure gauge)\u003cbr\u003eDivisionX Triple Pump Return Style Wiring Harness\u003cbr\u003eDivisionX High Flow Fuel Filter (Stainless Washable E85 Compatible Element Optional)\u003cbr\u003eFragola Pre-Assembled PTFE Feed and Return Lines\u003cbr\u003eOEM Adapter for OEM Fuel Rail Connectivity\u003cbr\u003eAll Fittings and Hardware Needed for Installation\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor more info, check out our full write-up \u003ca href=\"https:\/\/www.lethalperformance.com\/info\/l1andl2systems\" target=\"_blank\"\u003eHERE!\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eLooking for instructions? \u003ca href=\"https:\/\/www.lethalperformance.com\/pages\/fuel-system-installation-instructions\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e","brand":"Lethal Performance","offers":[{"title":"Default Title","offer_id":47954751226114,"sku":"LP-FS-1117L1RETURN","price":1294.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/1117_lvl1.jpg?v=1785025044"},{"product_id":"divisionx-dx-11821-the-box-dual-triple-pump-staged-fuel-pump-controller","title":"DivisionX DX-11821 The Box Dual \/ Triple Pump Staged Fuel Pump Controller","description":"\u003cdiv\u003e\u003ca href=\"https:\/\/www.lethalperformance.com\/info\/thebox\/\" target=\"_blank\"\u003eCHECK OUT OUR FULL WRITEUP ON THE BOX!\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003eThe DivisionX Box is a universal wiring solution for return style fuel systems running up to three fuel pumps.\u003cbr\u003e\nThe Box allows you to run 3 pumps at all time or staged with a Hobbs \/ Pressure switch. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003cbr\u003e\nRelays are rated at 50 amps (typical fuel pump relays are rated 30 to 40 amps)\u003cbr\u003e\nCircuitry uses \"Plug And Play\" design.\u003cbr\u003e\nThree integrated 30 amp replaceable fuses.\u003cbr\u003e\nStatus LEDs on relay OUTPUTS. Inline 80amp Fuse for main power wire to controller\u003cbr\u003e\nRun one, two or three fuel pumps full time or with remaining pumps activated on demand with an external hobbs\/pressure switch\u003cbr\u003e\n4 Gauge Main Power Wire\u003cbr\u003e\n12 Gauge wiring from Controller Box to Pumps\u003cbr\u003e\nOEM 6 Pin Connector for Plug and Play compatibility with all DivisionX Fuel Hats\u003cbr\u003e\nFuel pump trigger system works with switched 12V+ on\/off (9V+ minimum) High Current APP connectors for main power and ground to controller\u003cbr\u003e\nPositive trigger inputs using plug-in miniature connection: 10 to 16 VDC:\u003cbr\u003e\n1- powers pump 1\u003cbr\u003e\n2- powers pumps 2 and 3\u003cbr\u003e\nIntegrated SB connector rated at 50 amps\u003cbr\u003e\nIndividual fuel pump output connectors for each relay.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\nDivision X The Box Fuel Pump Controller\u003cbr\u003e\n15ft 4 AWG Power \/ Ground Wire\u003cbr\u003e\n4 AWG Ring Terminals\u003cbr\u003e\n7ft 12 AWG for 3 Fuel Pumps with Plug and Play Connector\u003cbr\u003e\nIn-Line Fuse Holder with 80amp Fuse (Main Power to Controller)\u003cbr\u003e\n15ft Wiring Harness for Pump Trigger \/ Hobbs \/ Pressure Switch\u003cbr\u003e\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":47954753093890,"sku":"DX-11821","price":228.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/dx-11821.jpg?v=1785026052"},{"product_id":"divisionx-high-flow-10-micron-fuel-filter-47538","title":"DivisionX 10 Micron High Flow Fuel Filter with Stainless Steel Element (E-85 and other ethanol based fuels)","description":"When it comes to fuel systems choosing a high quality fuel filter is definitely a must. It's a simple step towards protecting your injectors and ultimately your engine.  The DivisionX fuel filters are made from high grade CNC machined aluminum and feature O-ring seals on each end. The paper filter element is provided to us by an industry leader and is designed to work with gasoline, race fuels and ethanol based fuels such as E-85, E-98 and E-100.\u003cbr\u003eEach filter housing accepts -10an ORB Fittings\u003cstrong\u003e (Sold Separately)\u003c\/strong\u003e and the filters are replaceable. \u003cbr\u003e \u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eCompact Design (2\" Wide and 5-1\/2\" Long)\u003c\/li\u003e\n\u003cli\u003eBright Dip Black Anodized Finish provides a long lasting protective finish\u003c\/li\u003e\n\u003cli\u003e10 Micron Stainless Steel Wire Mesh Filter Element (Compatible with gasoline, race fuels and ethanol based fuels such as E-85, E-98 and E-100)\u003c\/li\u003e\n\u003cli\u003eAccepts -10an ORB fittings.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":47954753585410,"sku":"DX-0010MW","price":93.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/filteropen_1_1.jpg?v=1785025091"},{"product_id":"divisionx-large-marge-10-micron-high-flow-fuel-filter-microglass-element-e85-compatible","title":"DivisionX Large Marge 10 Micron High Flow Fuel Filter (MicroGlass Element \/ E85 Compatible)","description":"When it comes to fuel systems choosing a high quality fuel filter is definitely a must. It's a simple step towards protecting your injectors and ultimately your engine. The DivisionX fuel filters are made from high grade CNC machined aluminum and feature O-ring seals on each end. \u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eDivisionX Large Marge Fuel Filter Features:\u003c\/strong\u003e\u003cbr\u003e\n6.5\" x 2.75\" Diameter\u003cbr\u003e\nEach filter housing accepts -10an ORB Fittings\u003cbr\u003e\n10 Micron MicroGlass Filter Element\u003cbr\u003e\nFully Serviceable\u003cbr\u003e\nBright Dip Black Anodized for a long lasting protective finish\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\u003cstrong\u003eIncludes: \u003cbr\u003e\n(1) Filter Housing Assembly \u003cbr\u003e\n(1) MicroGlass Filter Element\u003c\/strong\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":47954753782018,"sku":"DX-0020LM-MG","price":93.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/largemarge_withelements_1.jpg?v=1784989452"},{"product_id":"divisionx-large-marge-10-micron-high-flow-fuel-filter-stainless-steel-element-e85-compatible","title":"DivisionX Large Marge 10 Micron High Flow Fuel Filter (Stainless Steel Element \/ E85 Compatible)","description":"When it comes to fuel systems choosing a high quality fuel filter is definitely a must. It's a simple step towards protecting your injectors and ultimately your engine. The DivisionX fuel filters are made from high grade CNC machined aluminum and feature O-ring seals on each end. \u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eDivisionX Large Marge Fuel Filter Features:\u003c\/strong\u003e\u003cbr\u003e\n6.5\" x 2.75\" Diameter\u003cbr\u003e\nEach filter housing accepts -10an ORB Fittings\u003cbr\u003e\n10 Micron Stainless Steel Filter Element\u003cbr\u003e\nFully Serviceable\u003cbr\u003e\nBright Dip Black Anodized for a long lasting protective finish\u003cbr\u003e\n\n\u003cbr\u003e\u003cstrong\u003eIncludes: \u003cbr\u003e\n(1) Filter Housing Assembly \u003cbr\u003e\n(1) Stainless Steel Filter Element\u003c\/strong\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":47954753650946,"sku":"DX-0020LM-SS","price":109.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/largemarge_withstandard_notext.jpg?v=1784989452"},{"product_id":"divisionx-2-port-efi-fuel-pressure-regulator","title":"DivisionX 2 Port EFI 1:1 Boost Reference Fuel Pressure Regulator","description":"\u003cul\u003e\n\u003cli\u003eUnique guided-metering valve assembly provides accurate metering              of fuel flow\u003c\/li\u003e\n\u003cli\u003eDivisionX EFI Regulators provide the most stable platform for fuel              delivery in the performance industry\u003c\/li\u003e\n\u003cli\u003eMaintains steady fuel fuel flow during times of sudden changes  in              fuel demands, such as initial launch, gear change and  nitrous oxide              application\u003c\/li\u003e\n\u003cli\u003eDesigned for use with the MagnaFuel EFI gear pumps\u003c\/li\u003e\n\u003cli\u003eRegulators available in two different body sizes and different  spring              combination's to suit your fuel flow at pressure  specifications\u003c\/li\u003e\n\u003cli\u003eEach Regulator has 1\/8\" NPT gauge port, standard filtered vent               fitting or boost reference fitting (1:1 compensation ratio)\u003c\/li\u003e\n\u003cli\u003eSpecial fittings and adapters available for most applications\u003c\/li\u003e\n\u003cli\u003eAll DivisionX Regulators are hand assembled to the highest quality\u003c\/li\u003e\n\u003cli\u003eDivisionX Regulators are compatible with racing gasoline and alcohol              fuels\u003c\/li\u003e\n\u003cli\u003eBillet body precision CNC-machined from aircraft-quality aluminum              and hard anodized for extra long service life\u003c\/li\u003e\n\u003cli\u003eCompletely user-serviceable, with ready to order replacements parts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e \u003cbr\u003e MP-9925-B uses 2 X #8 AN, 1 X #6 AN return ports. \u003cbr\u003e \u003cbr\u003e *** Fittings are not included ***\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48141321601282,"sku":"DX-1039","price":157.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/DX-1039.jpg?v=1784983473"},{"product_id":"divisionx-high-flow-10-micron-fuel-filter-element-wire-washable","title":"DivisionX 10 Micron Wire Mesh Washable Replacement Filter Element (E85 and Flex Fuels)","description":"\u003cp\u003eReplacement 10 Micron Wire Mesh Washable Replacement Filter Element (E85 and Flex Fuels)Recommended for use with E-85 and Flex FuelsThis filter element can be washed and re-used.\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48141325304066,"sku":"DX-10MW","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/dx-10mw.jpg?v=1784983493"},{"product_id":"divisionx-07-2014-shelby-gt500-2011-2017-mustang-5-0l-oem-line-adapter-for-aftermarket-fuel-rails","title":"DivisionX 07-2014 Shelby GT500 \/ 2011-2021 Mustang 5.0L OEM Line Adapter for Aftermarket Fuel Rails","description":"\u003cp\u003eNew DivisionX line adapter for aftermarket rails is now here! Featuring a low profile design, this adapter connects aftermarket rails that use -8an O ring threads to the OEM fuel line. Also incorporated into the adapter is a 1\/8\" NPT port (plug supplied) that can be utilized for a pressure gauge or nitrous fuel feed. \u003c\/p\u003eFeatures:\u003cbr\u003e\u003cli\u003eGloss black anodized\u003c\/li\u003e\u003cli\u003eLow profile design\u003c\/li\u003e\u003cli\u003eConnects OEM line to -8an fuel rails\u003c\/li\u003e\u003cli\u003e1\/8\" NPT port for pressure gauge or nitrous fuel (plug supplied)\u003c\/li\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48141361316098,"sku":"DX-505458","price":72.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/p1010006.jpg?v=1784983692"},{"product_id":"division-x-fuel-pressure-regulator-bracket-fits-any-regulator-included-in-division-x-lethal-performance-fuel-systems-all-mustangs","title":"DivisionX Fuel Pressure Regulator Bracket (fits any regulator included in DivisionX \/ Lethal Performance fuel systems) (2015+ Mustang GT S550)","description":"\u003cp\u003eThe Division X Fuel Pressure Regulator Mounting Bracket will cleanly mount your aftermarket fuel pressure regulator to either the driver or passenger side strut tower.\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48141736050946,"sku":"DX-2735-5-1","price":41.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/20200507_120518.jpg?v=1784985985"},{"product_id":"divisionx-extreme-flow-2-port-efi-regulator-universal-fit","title":"DivisionX Extreme Flow 2-Port EFI Regulator (Universal Fit)","description":"\u003cp\u003e\u003cem\u003e30-75 PSI and 75-125 PSI Base Pressure Range\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for Mechanical pumps up to 5.0 GPM.\u003c\/li\u003e\n\u003cli\u003eCompact, 2-Port Body with dual AN-10 inlet\/outlet ports and one AN-10 return port.\u003c\/li\u003e\n\u003cli\u003eHigh Flow 0.313″ Valve\/Seat, optimized for larger electric fuel pumps in the 2.5-5.0 GPM flow range.\u003c\/li\u003e\n\u003cli\u003eDual Springs expand pressure range while maintaining a low profile and reduced weight.\n\u003cul\u003e\n\u003cli\u003eStandard spring (installed) supports 30-75 PSI base fuel pressure.\u003c\/li\u003e\n\u003cli\u003eHigh Pressure spring (included) supports 75-120 PSI base fuel pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSystems where an electric pump is desired and where base pressure exceeds 70-PSI should run two pumps of similar flow rate, in series.\u003c\/li\u003e\n\u003cli\u003eThis product is not legal for sale or use on emission-controlled vehicles except when used on a dedicated race vehicle.\u003c\/li\u003e\n\u003cli\u003eVacuum and boost reference on a 1:1 ratio.\u003c\/li\u003e\n\u003cli\u003eCompatible with gasoline, ethanol and methanol.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48142047084802,"sku":"DX-13143","price":221.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/13143_2.jpg?v=1784987461"},{"product_id":"divisionx-pro-series-efi-fuel-pressure-regulator-universal-fit","title":"DivisionX Pro-Series EFI Fuel Pressure Regulator (Universal Fit)","description":"\u003cp\u003eThe tuners choice for high horsepower EFI applications. The Pro-Series Regulator can support up to 2000 HP. For engines requiring high volume, high pressure fuel delivery the Pro-Series Boost Reference EFI Regulator is a perfect fit for serious power.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable base pressure from 30-60 PSI.\u003c\/li\u003e\n\u003cli\u003eAuxiliary ports available for nitrous applications, pressure gauges and transducers.\u003c\/li\u003e\n\u003cli\u003eReferences Vacuum\/Boost on a 1:1 ratio. Includes two boost line adapters, one barbed for rubber hose, the other for AN-04 braided line. (Prevents blow-off in high boost applications)\u003c\/li\u003e\n\u003cli\u003eDedicated 1\/8 NPT port.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eIncludes Aeromotives radiused tapered flare fittings:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(3) ORB-08 and (1) ORB-10 inlet ports, two with AN-08 flare adapters.\u003c\/li\u003e\n\u003cli\u003e(1) ORB-10 return port with AN-10 flare adapter port plugs included.\u003c\/li\u003e\n\u003cli\u003eVirtually indestructible electroless nickel-plating finish on the body with type II bright dip black anodized cap.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48142047314178,"sku":"DX-13142","price":340.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/aer-13110_1_1.jpg?v=1784987462"},{"product_id":"divisionx-efi-pro-return-style-regulator-universal-fit","title":"DivisionX EFI Pro Return Style Regulator (Universal Fit)","description":"\u003cp\u003e\u003cem\u003eEFI\u003c\/em\u003e return style\u003cem\u003e Regulator for Return Style Systems\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBase fuel pressure adjustable from 35-75 PSI.\u003c\/li\u003e\n\u003cli\u003eVacuum\/Boost reference capability.\u003c\/li\u003e\n\u003cli\u003e1:1 rising rate for forced induction engines.\u003c\/li\u003e\n\u003cli\u003eGasoline, ethanol, alcohol and diesel compatible.\u003c\/li\u003e\n\u003cli\u003e2 – ORB -08 inlet\/outlet ports on the sides.\u003c\/li\u003e\n\u003cli\u003e1 – ORB-08 return port on the bottom port.\u003c\/li\u003e\n\u003cli\u003e1 – 1\/8″ NPT Gauge Port with plug.\u003c\/li\u003e\n\u003cli\u003e1\/16″ NPT Boost Port with 5\/32″ hose barb.\u003c\/li\u003e\n\u003cli\u003eCompatible with X1 EFI Conversion kit.\u003c\/li\u003e\n\u003cli\u003eCompatible with X1 Carb Conversion kit.\u003c\/li\u003e\n\u003cli\u003e0.313″ return style with matching spring and poppet.\u003c\/li\u003e\n\u003cli\u003eHandles up to 250 GPH with AN-08 return line.\u003c\/li\u003e\n\u003cli\u003eMounting bracket included (not shown).\u003c\/li\u003e\n\u003cli\u003eThis product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48142047412482,"sku":"DX-13307","price":212.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/13306_3_1.jpg?v=1784987462"},{"product_id":"swift-filters-10-micron-wire-mesh-filter-1-020-id-x-1-75-od-x-4-437-062-00-oal-single-open-end-viton-o-ring-seal","title":"DivisionX 10 Micron Wire Mesh Filter - 1.020\" ID X 1.75\" OD X 4.437\" +.062 (-.00)\" OAL, Single Open End, Viton O-Ring Seal (Fits DivisionX Large Marge Filters)","description":"\u003cp\u003e\u003cspan style=\"font-family: 'Arial,Helvetica,sans-serif'; font-size: small; color: rgb(34, 34, 34); background-color: rgb(255, 255, 255);\"\u003e10 Micron Wire Mesh Filter -\u003c\/span\u003e \u003cspan style=\"font-family: 'Arial,Helvetica,sans-serif'; font-size: small; color: rgb(34, 34, 34); background-color: rgb(255, 255, 255);\"\u003e1.020\" ID X 1.75\" OD X 4.437\" +.062 (-.00)\" OAL, Single Open End, Viton O-Ring Seal\u003c\/span\u003e\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48143231353090,"sku":"DX-SF6235-4A-010UWV","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/screen_shot_2022-02-23_at_5.20.24_pm.png?v=1784993842"},{"product_id":"swift-filters-12-micron-pleated-microglass-1-020-id-x-1-75-od-x-4-437-062-00-oal","title":"DivisionX Filter Element 12 Micron Pleated Microglass - 1.020\" ID X 1.75\" OD X 4.437\" +.062 (-.00)\" OAL (Fits DivisionX Large Marge Filters)","description":"\u003cp style=\"margin-bottom: 0px;\"\u003e12 Micron Pleated Microglass - 1.020\" ID X 1.75\" OD X 4.437\" +.062 (-.00)\" OAL\u003c!--EndFragment--\u003e\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48143231484162,"sku":"DX-SF6235-4A-012UMV","price":42.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/p7_9020-4mg.jpg?v=1784993843"},{"product_id":"divisionx-preassembled-ptfe-hose-kit-level-2-2011-2017-mustang-5-0-coyote","title":"DivisionX Preassembled PTFE Hose Kit - Level 2 (2011-2017 Mustang 5.0 Coyote)","description":"\u003cp\u003e‌This hose kit routes fuel through a Y block, then the rails, then the regulator.  \u003c\/p\u003e\n\u003cp\u003eThis is a return system hose kit with PTFE hoses and installed Hose End Fittings.\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48145480581378,"sku":"DX-LP-1117L2","price":373.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/lp-s197r-coy.jpg?v=1785004047"},{"product_id":"divisionx-preassembled-ptfe-hose-kit-level-1-2011-2017-mustang-5-0-coyote","title":"DivisionX Preassembled PTFE Hose Kit - Level 1 (2011-2017 Mustang 5.0 Coyote)","description":"\u003cp\u003e‌This hose kit routes fuel through the regulator then the rails.  \u003c\/p\u003e\n\u003cp\u003eThis is a return system hose kit with PTFE hoses and installed Hose End Fittings.\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48145480712450,"sku":"DX-LP-11\/17-BUDRET","price":254.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/lp-s197r-coy_a9dd00dd-9b3d-4198-b10b-43b666de541c.jpg?v=1785004052"},{"product_id":"lethal-performance-2011-2017-mustang-gt-level-1-return-style-fuel-system-rear-fed-superchargers-whipple-vmp-roush-ford-performance","title":"2011-2017 Mustang GT Level 1 Return Style Fuel System (Rear Fed Superchargers - Whipple, VMP, Roush, Ford Performance)","description":"\u003cdiv class=\"video-container\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/46awzbN61Bc\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003eAre you running out of fuel with your current combo or simply looking to support more power or different fuel types without breaking the bank? We've got the solution for you. The all new Level 1 Return style fuel system for your 2011-2017 Ford Mustang GT with rear fed supercharger is exactly what you need. Not only does this kit have the ability to work with your fuel rails but has the ability to be upgraded later on. So if you're looking to add an additional pump at a later date the Level 1 Return system has that flexibility.\u003cbr\u003e\n\u003cbr\u003e\nUtilizing the DivisionX S197-C billet fuel hat as the systems backbone you can run up to 3 pumps based on what type of power you're looking to support and what fuel you'll be using. We then run a 8an feed line to our aftermarket fuel filter and from there the Aeromotive X1 Series EFI bypass regulator. From there we feed the driver fuel rail with a new fitting mating to the front of your existing rail. Fuel is returned to the fuel tank with a 6an return hose off of the regulator. Our Level 1 system uses all Fragola PTFE fuel hoses which are pre-assembled and won't leak or smell of fuel. Included in this system is our dual pump return style wiring harness which is plug and play with the DivisionX S197-C fuel hat. The triple pump wiring harness is available as an upgrade for those looking to run 3 pumps.\u003cbr\u003e\n\u003cbr\u003e\nWhy go with this system as opposed to others that use a factory style fuel hat and pump setup? This system has much more capability than other kits on the market and as mentioned can easily be upgraded to a triple pump setup or with aftermarket fuel rails. Our competitors are stuck using only 2 inferior fuel pumps where this system has the option to use one of many of the top notch pump offerings from Walbro.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eWhat's Included?:\u003c\/strong\u003e\u003cbr\u003e\nDivisonX S197-C Triple Pump Fuel Hat\u003cbr\u003e\nAeromotive X1 Series EFI Bypass Regulator (with fuel pressure gauge)\u003cbr\u003e\nDivisionX Dual Triple Pump Return Style Wiring Harness\u003cbr\u003e\nDivisionX High Flow Fuel Filter (Stainless Washable E85 Compatible Element Optional)\u003cbr\u003e\nWalbro Fuel F90000267 456lph E85 Approved Pumps (upgradable)\u003cbr\u003e\nFragola Pre-Assembled PTFE Feed and Return Lines\u003cbr\u003e\nAll Fittings and Hardware Needed for Installation\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor more info, check out our full write-up \u003ca href=\"https:\/\/www.lethalperformance.com\/info\/l1andl2systems\" target=\"_blank\"\u003eHERE!\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLooking for instructions? \u003ca href=\"https:\/\/www.lethalperformance.com\/pages\/fuel-system-installation-instructions\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e","brand":"Lethal Performance","offers":[{"title":"Default Title","offer_id":48150089564418,"sku":"LP-FS-1117L1RETURN-REARFED","price":1402.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/1117_lvl1_1.jpg?v=1785025038"},{"product_id":"lethal-performance-level-1-2018-2023-mustang-gt-return-style-fuel-system-stock-manifold","title":"Level 1 2018-2023 Mustang GT Return Style Fuel System (Stock Manifold)","description":"\u003cp\u003eThe Lethal Performance Level 1 2018-2023 return style fuel system was designed for those looking to make big power as well as have the option to run different fuel types. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eThis system will work with Paxton, Procharger, and turbo (single\/twin) setups. It comes with aftermarket fuel rails.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\nThis is a single regulator fuel system which feeds the DI pump and fuel rails from a Y-block. Fuel is then regulated by the Aeromotive fuel pressure regulator on the drivers side and returned back to the fuel tank. \u003cbr\u003e\n\u003cbr\u003e\nFragola pre-assembled PTFE lined hoses are used for the hose routing. The Fragola PTFE hoses not only look good and are easy to install, but they also don't have any fuel weep or smell to them whether you run pump gas or Ethanol based fuels. The PTFE fuel hoses are also covered in a black coating to help prevent the stainless outer braid from rubbing or scratching any part of your vehicle.\u003cbr\u003e\n\u003cbr\u003e\nWiring for this system is super easy with the provided Lethal Performance Triple pump fuel wiring harness. Our triple pump wiring harness features high quality wires\/components, 3 40amp relays which are all individually fused and the main power from the battery is also protected by a fusible link.\u003cbr\u003e\n\u003cbr\u003e\nThis particular system is designed specifically for those running a stock manifold. \u003cbr\u003e\n\u003cbr\u003e\nThis fuel system will work with gasoline, race fuels and Ethanol based fuels such as E85.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003cbr\u003e\nDivisionX Fuel Hat (Run up to 3 pumps)\u003cbr\u003e\nDivisionX 2018+ Mustang GT High Flow Fuel Rails (Black Anodized)\u003cbr\u003e\n\u003cspan data-sheets-value=\"{\" walbro f90000267 e85 approved fuel pumps data-sheets-userformat=\"{\"\u003e2 Walbro F90000267 465lph E85 Approved Fuel Pumps\u003c\/span\u003e\u003cbr\u003e\nDivisionX High Flow Fuel Filter (Optional Stainless \/ Washable Filter Element)\u003cbr\u003e\nLethal Performance Triple Pump Return Style Wiring Harness\u003cbr\u003e\nDivisionX 13143 Extreme Flow 2-Port Regulator\u003cbr\u003e\nPre-Assembled Fragola PTFE Lined Black Coated Fuel Hose\u003cbr\u003e\nFragola Performance Fuel Fittings, Vacuum Hose, Zip Ties, Loom Clamps, Self -Tapping Screws and T-Fitting\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNOTE: This system is to be used with the stock intake manifold on 2018+ GT's. To use this system on a Whipple or Edelbrock equipped vehicle you'll want to choose the system specific to that supercharger model. Additional, for some supercharged and turbocharged setups, some customizations may be needed to bracketry due to fitment.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLooking for instructions? \u003ca href=\"https:\/\/www.lethalperformance.com\/pages\/fuel-system-installation-instructions\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e","brand":"Lethal Performance","offers":[{"title":"Default Title","offer_id":48150089597186,"sku":"LP-FS-2018GTL1","price":2039.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/18_levl1.jpg?v=1785025039"},{"product_id":"lethal-performance-level-1-2018-2023-mustang-gt-return-style-fuel-system-whipple-supercharger-configuration","title":"Level 1 2018-2023 Mustang GT Return Style Fuel System (Whipple Supercharger Configuration)","description":"\u003cp\u003eThe Lethal Performance Level 1 2018-2023 return style fuel system was designed for those looking to make big power as well as have the option to run different fuel types. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\nThis is a single regulator fuel system which feeds the DI pump and fuel rails from a Y-block. Fuel is then regulated by the Aeromotive fuel pressure regulator on the drivers side and returned back to the fuel tank. \u003cbr\u003e\n\u003cbr\u003e\nFragola pre-assembled PTFE lined hoses are used for the hose routing. The Fragola PTFE hoses not only look good and are easy to install, but they also don't have any fuel weep or smell to them whether you run pump gas or Ethanol based fuels. The PTFE fuel hoses are also covered in a black coating to help prevent the stainless outer braid from rubbing or scratching any part of your vehicle.\u003cbr\u003e\n\u003cbr\u003e\nWiring for this system is super easy with the provided Lethal Performance Triple pump fuel wiring harness. Our triple pump wiring harness features high quality wires\/components, 3 40amp relays which are all individually fused and the main power from the battery is also protected by a fusible link.\u003cbr\u003e\n\u003cbr\u003e\nThis fuel system will work with gasoline, race fuels and Ethanol based fuels such as E85.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003cbr\u003e\nDivisionX Fuel Hat (Run up to 3 pumps)\u003cbr\u003e\n\u003cspan data-sheets-value=\"{\" walbro f90000267 e85 approved fuel pumps data-sheets-userformat=\"{\"\u003e2 Walbro F90000267 465lph E85 Approved Fuel Pumps (upgradable)\u003c\/span\u003e\u003cbr\u003e\nDivisionX High Flow Fuel Filter (Optional Stainless \/ Washable Filter Element for E85 and other fuel types)\u003cbr\u003e\nLethal Performance Dual Pump Return Style Wiring Harness (Upgradable to Triple Pump)\u003cbr\u003e\nDivisionX 13143 Extreme Flow 2-Port Regulator\u003cbr\u003e\nWhipple Specific Pre-Assembled Fragola PTFE Lined Black Coated Fuel Hose\u003cbr\u003e\nFragola Performance Fuel Fittings, Vacuum Hose, Zip Ties, Loom Clamps, Self -Tapping Screws and T-Fitting\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNOTE: This system is to be used with the fuel rails provided in the Whipple Supercharger Kit. To use this system on a car equipped with the stock 2018+ Mustang GT fuel rails you'll want to choose the system specific to the stock manifold\/fuel rails.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLooking for instructions? \u003ca href=\"https:\/\/www.lethalperformance.com\/pages\/fuel-system-installation-instructions\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e","brand":"Lethal Performance","offers":[{"title":"Default Title","offer_id":48150089629954,"sku":"LP-FS-2018GTL1-WHP","price":1869.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/18_fs_level11_whpedl_f44063ce-09ca-440e-9bae-46af22de7154.jpg?v=1785025042"},{"product_id":"lethal-performance-2018-2023-mustang-gt-return-style-fuel-system","title":"2018-2023 Mustang GT Return Style Fuel System","description":"\u003cp\u003eThe Lethal Performance 2018-2023 return style fuel system was designed for those looking to make big power as well as have the option to run different fuel types. Since the 2018+ Mustang GT comes both port and direct injected we designed our return style fuel system with 2 fuel pressure regulators and the option to run either two or three pumps.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eThis system will work with Paxton, Procharger, and turbo (single\/twin) setups. It comes with aftermarket fuel rails.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\nOne of the Aeromotive fuel pressure regulators provides static fuel pressure to the high pressure fuel pump while the other Aeromotive regulator is boost referenced to support the port side fueling. Fuel is provided by the DivisionX triple pump fuel hat capable of running either 2 or 3 pumps and is a direct replacement for your stock fuel pump assembly. The DivisionX fuel hat utilizes the stock fuel level sender so you'll always have an accurate fuel level reading.\u003cbr\u003e\n\u003cbr\u003e\nFragola pre-assembled PTFE lined hoses are used for the hose routing. The Fragola PTFE hoses not only look good and are easy to install, but they also don't have any fuel weep or smell to them whether you run pump gas or Ethanol based fuels. The PTFE fuel hoses are also covered in a black coating to help prevent the stainless outer braid from rubbing or scratching any part of your vehicle.\u003cbr\u003e\n\u003cbr\u003e\nWiring for this system is super easy with the provided Lethal Performance Triple pump fuel wiring harness. Our triple pump wiring harness features high quality wires\/components, 3 40amp relays which are all individually fused and the main power from the battery is also protected by a fusible link.\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nThis fuel system will work with gasoline, race fuels and Ethanol based fuels such as E85.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003cbr\u003e\nDivisionX Fuel Hat (Run up to 3 pumps)\u003cbr\u003e\nDivisionX 2018+ Mustang GT High Flow Fuel Rails (Black Anodized)\u003cbr\u003e\n\u003cspan data-sheets-value=\"{\" walbro f90000267 e85 approved fuel pumps data-sheets-userformat=\"{\"\u003e2 Walbro F90000267 465lph E85 Approved Fuel Pumps\u003c\/span\u003e\u003cbr\u003e\nDivisionX High Flow Fuel Filter (Optional Stainless \/ Washable Filter Element)\u003cbr\u003e\nLethal Performance Triple Pump Return Style Wiring Harness\u003cbr\u003e\nDual DivisionX 13143 Extreme Flow 2-Port Regulators\u003cbr\u003e\nPre-Assembled Fragola PTFE Lined Black Coated Fuel Hose\u003cbr\u003e\nFragola Performance Fuel Fittings, Vacuum Hose, Zip Ties, Loom Clamps, Self -Tapping Screws and T-Fitting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: This system is to be used with the stock intake manifold on 2018+ GT's. To use this system on a Whipple or Edelbrock equipped vehicle you'll want to choose the system specific to that supercharger model. Additional, for some supercharged and turbocharged setups, some customizations may be needed to bracketry due to fitment.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLooking for instructions? \u003ca href=\"https:\/\/www.lethalperformance.com\/pages\/fuel-system-installation-instructions\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e","brand":"Lethal Performance","offers":[{"title":"Default Title","offer_id":48150089695490,"sku":"LP-FS-2018GT","price":2252.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/18_fs_withrails_1.jpg?v=1785025044"},{"product_id":"lethal-performance-2011-2017-mustang-gt-level-2-return-style-fuel-system-whipple-edelbrock-supercharger","title":"2011-2017 Mustang GT \u0026 GT350 Level 2 Return Style Fuel System (Whipple \/ Edelbrock Supercharger)","description":"\u003cdiv class=\"video-container\"\u003e\u003ciframe frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/46awzbN61Bc\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003eAre you running out of fuel with your current combo or simply looking to support more power or different fuel types without breaking the bank? We've got the solution for you. The all new Level 2 Return style fuel system for your 2011-2017 Ford Mustang GT is exactly what you need. The Level 2 system varies from the Level 1 system as it no longer uses your stock fuel rails in a deadhead configuration. Instead it now uses the fuel rails supplied with your Whipple or Edelbrock supercharger kit and is run in a traditional style routing for the hoses. We accomplish this by using a Y-block at the end of the main feed line which then feeds each aftermarket fuel rail from the rear. We then leave each rail from the front and feed the Aeromotive X1 Series Pro EFI Bypass Regulator where the fuel is regulated and then returned to the tank. \u003cbr\u003e\n\u003cbr\u003e\nUtilizing the DivisionX S197-C billet fuel hat as the systems backbone you can run up to 3 pumps based on what type of power you're looking to support and what fuel you'll be using. We then run a 8an feed line to our aftermarket fuel filter and from there the Aeromotive X1 Series Pro EFI bypass regulator. Our Level 2 system uses all Fragola PTFE fuel hoses which are pre-assembled and won't leak or smell of fuel. Included in this system is our dual pump return style wiring harness which is plug and play with the DivisionX S197-C fuel hat. The triple pump wiring harness is available as an upgrade for those looking to run 3 pumps.\u003cbr\u003e\n\u003cbr\u003e\nWhy go with this system as opposed to others that use a factory style fuel hat and pump setup? This system has much more capability than other kits on the market and as mentioned can easily be upgraded to a triple pump setup. Our competitors systems are stuck using only 2 inferior fuel pumps where this system has the option to use up to three of the top notch pump offerings from Walbro.\u003c\/p\u003e\n\u003cp\u003e*** Fitment is not confirmed on a 2.3L Whipple ***\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eWhat's Included?:\u003c\/strong\u003e\u003cbr\u003e\nDivisonX S197-C Triple Pump Fuel Hat\u003cbr\u003e\nAeromotive X1 Series Pro EFI Bypass Regulator (with fuel pressure gauge)\u003cbr\u003e\nDivisionX Triple Pump Return Style Wiring Harness\u003cbr\u003e\nDivisionX High Flow Fuel Filter (Stainless Washable E85 Compatible Element Optional)\u003cbr\u003e\nWalbro F90000267 465lph E85 Approved Fuel Pumps\u003cbr\u003e\nFragola Pre-Assembled PTFE Feed and Return Lines\u003cbr\u003e\nAll Fittings and Hardware Needed for Installation\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor more info, check out our full write-up \u003ca href=\"https:\/\/www.lethalperformance.com\/info\/l1andl2systems\" target=\"_blank\"\u003eHERE!\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLooking for instructions? \u003ca href=\"https:\/\/www.lethalperformance.com\/pages\/fuel-system-installation-instructions\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e","brand":"Lethal Performance","offers":[{"title":"Default Title","offer_id":48150089728258,"sku":"LP-FS-1117L2RETURN-WHPEDL","price":1784.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/1117_lvl2_norails.jpg?v=1785025038"},{"product_id":"lethal-performance-2018-2023-mustang-gt-return-style-fuel-system-whipple-edelbrock-e-force-supercharger","title":"2018-2023 Mustang GT Return Style Fuel System (Whipple\/Edelbrock E-Force Supercharger)","description":"\u003cdiv class=\"video-container\"\u003e\u003ciframe frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/htCDQwL_ah4\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003eThe Lethal Performance 2018-2023 mustang GT return style fuel system was designed for those looking to make big power as well as have the option to run different fuel types. Since the 2018+ Mustang GT comes both port and direct injected we designed our return style fuel system with 2 fuel pressure regulators and the option to run either two or three pumps.\u003cbr\u003e\n\u003cbr\u003e\nOne of the Aeromotive fuel pressure regulators provides static fuel pressure to the high pressure fuel pump while the other Aeromotive regulator is boost referenced to support the port side fueling. Fuel is provided by the DivisionX triple pump fuel hat capable of running either 2 or 3 pumps and is a direct replacement for your stock fuel pump assembly. The DivisionX fuel hat utilizes the stock fuel level sender so you'll always have an accurate fuel level reading.\u003cbr\u003e\n\u003cbr\u003e\nFragola pre-assembled PTFE lined hoses are used for the hose routing. The Fragola PTFE hoses not only look good and are easy to install, but they also don't have any fuel weep or smell to them whether you run pump gas or Ethanol based fuels. The PTFE fuel hoses are also covered in a black coating to help prevent the stainless outer braid from rubbing or scratching any part of your vehicle.\u003cbr\u003e\n\u003cbr\u003e\nWiring for this system is super easy with the provided Lethal Performance Triple pump fuel wiring harness. Our triple pump wiring harness features high quality wires\/components, 3 40amp relays which are all individually fused and the main power from the battery is also protected by a fusible link.\u003cbr\u003e\n\u003cbr\u003e\nThis particular system is designed specifically for those running the new Gen 5 3.0L Whipple Supercharger system. Reason being is the Whipple kit has it's own fuel rails so other aftermarket or OEM rails will not work with their kit. Due to this our Whipple specific system is designed to work with the fuel rails which Whipple provides in their kit.\u003cbr\u003e\n\u003cbr\u003e\nThis fuel system will work with gasoline, race fuels and Ethanol based fuels such as E85.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003cbr\u003e\nDivisionX Fuel Hat (Run up to 3 pumps)\u003cbr\u003e\n2 Walbro F90000267 465lph E85 Approved Fuel Pumps (Upgradable)\u003cbr\u003e\nDivisionX High Flow Fuel Filter (Optional Stainless \/ Washable Filter Element)\u003cbr\u003e\nLethal Performance Triple Pump Return Style Wiring Harness\u003cbr\u003e\nDual DivisionX 13143 Extreme Flow 2-Port Regulators\u003cbr\u003e\nPre-Assembled Fragola PTFE Lined Black Coated Fuel Hose\u003cbr\u003e\nFragola Performance Fuel Fittings, Vacuum Hose, Zip Ties, Loom Clamps, Self -Tapping Screws and T-Fitting\u003cbr\u003e\n\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eLooking for instructions? \u003ca href=\"https:\/\/www.lethalperformance.com\/pages\/fuel-system-installation-instructions\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e","brand":"Lethal Performance","offers":[{"title":"Default Title","offer_id":48150089924866,"sku":"LP-FS-2018GT-WHP","price":1954.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/18_fs_norails_1.png?v=1785025039"},{"product_id":"divisionx-2011-2017-mustang-5-0l-high-flow-billet-fuel-rails","title":"DivisionX 2011-2017 Mustang 5.0L High Flow Billet Fuel Rails","description":"\u003cp\u003eNew from DivisionX are these high flow fuel rails for your high powered Coyote and Road Runner engine. Precision machined from 6061 billet aluminum, these rails feature a high luster black anodize finish for great looks, stealth and corrosion protection. Inside diameter is 11\/16\" which makes them THE highest flowing on the market and they are used in all of our 850-2000rwhp fuel systems. The ends use -8an O-ring threads so there is no need for any thread sealer for a leak proof seal and come equipped with two 1\/8\" NPT ports to supply fuel to a fuel pressure sending unit or a nitrous fuel solenoid. Plugs are included in the case you are not going to utilize the 1\/8\" ports. \u003c\/p\u003e\u003cbr\u003e\u003cstrong\u003eDivisonX 5.0L Fuel Rail Features\u003c\/strong\u003e\u003cbr\u003e-Precision machined from 6061 billet aluminum\u003cbr\u003e-Black anodized finish\u003cbr\u003e-11\/16\" inside diameter (largest available for this application)\u003cbr\u003e-Featured in our 850-2000rwhp complete fuel systems\u003cbr\u003e- -8an O-ring threads\u003cbr\u003e-Two 1\/8\" NPT ports\u003cbr\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48150099132674,"sku":"DX-2250","price":229.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/rails.jpg?v=1785025145"},{"product_id":"divisionx-2011-2017-mustang-5-0l-high-flow-fuel-rail-kit","title":"DivisionX 2011-2017 Mustang 5.0L High Flow Fuel Rail Kit","description":"\u003cdiv class=\"p-rich_text_section\"\u003e\n\u003cspan style=\"font-size: small;\"\u003eThese DivisionX fuel rails are compatible with any vehicles that use the 5.0L Coyote engine including the direct injection 2018+ engines. Optional plumbing kits enable you to install these to the OE returnless fuel system.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eFeatures:\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003ePrecision machined billet 6061-T6 aluminium\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eOne piece billet rails\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eHigh Flow 11\/16” bore\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eIncludes 1\/8” NPT ports for the installation of a remote fuel pressure sending unit or gauge and to provide a fuel supply for nitrous injection systems.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003e1\/8\" NPT ports require teflon paste on the fittings to prevent any leaks\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48150106407170,"sku":"DX-COYRAILKIT","price":334.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/p1010036.jpg?v=1785025196"},{"product_id":"divisionx-billet-high-flow-fuel-rails-black-anodized-2018-mustang-gt-2015-2019-shelby-gt350","title":"DivisionX Billet High Flow Fuel Rails - Black Anodized (2018+ Mustang GT \/ 2015-2019 Shelby GT350","description":"\u003cp\u003eAll new at Lethal Performance are the DivisionX 2018+ Mustang GT \/ 2015+ Shelby GT350 high flow billet fuel rails. Made from high quality aluminum and cnc machined to perfection these fuel rails are a direct replacement for the factory fuel rails. Not only can these adapt to your vehicle and be used with the stock fuel system (additional adapter kit purchase required) they're also compatible with aftermarket return style fuel systems.\u003cbr\u003e\n\u003cbr\u003e\nThese new rails have the provision for the 2018+ Mustang GT's high pressure fuel pump as well as the fuel pressure and temperature sensor used on the GT350.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eDivisonX 2018+ GT 5.0L \/ 2015-2019 Shelby GT350 5.2L Billet Fuel Rail Features\u003c\/strong\u003e\u003cbr\u003e\n-Precision machined from 6061 billet aluminum\u003cbr\u003e\n-Black anodized finish\u003cbr\u003e\n-11\/16\" inside diameter (largest available for this application)\u003cbr\u003e\n-Featured in our 850-2000rwhp complete fuel systems\u003cbr\u003e\n-Provision for the High Pressure Fuel Pump feed -Provision for the Fuel Pressure and Temperature Sensor Used on the GT350- -8an O-ring threads\u003cbr\u003e\n-Two 1\/8\" NPT ports\u003cbr\u003e\u003c\/p\u003e","brand":"DivisionX","offers":[{"title":"Default Title","offer_id":48150145171714,"sku":"DX-2250-18","price":229.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/18rails.jpg?v=1785025472"},{"product_id":"lethal-performance-2011-2017-mustang-gt-level-2-return-style-fuel-system","title":"2011-2017 Mustang GT \u0026 GT350 Level 2 Return Style Fuel System","description":"\u003cdiv class=\"video-container\"\u003e\u003ciframe frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/46awzbN61Bc\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003eAre you running out of fuel with your current combo or simply looking to support more power or different fuel types without breaking the bank? We've got the solution for you. The all new Level 2 Return style fuel system for your 2011-2017 Ford Mustang GT is exactly what you need. The Level 2 system varies from the Level 1 system as it no longer uses your stock fuel rails in a deadhead configuatrion. Instead it now uses a set of the DivisionX billet Coyote fuel rails and is run in a traditional style routing for the hoses. We accomplish this by using a Y-block at the end of the main feed line which then feeds each aftermarket fuel rail from the rear. We then leave each rail from the front and feed the Aeromotive X1 Series Pro EFI Bypass Regulator where the fuel is regulated and then returned to the tank. \u003cbr\u003e\n\u003cbr\u003e\nUtilizing the DivisionX S197-C billet fuel hat as the systems backbone you can run up to 3 pumps based on what type of power you're looking to support and what fuel you'll be using. We then run a 8an feed line to our aftermarket fuel filter and from there the Aeromotive X1 Series Pro EFI bypass regulator. Our Level 2 system uses all Fragola PTFE fuel hoses which are pre-assembled and won't leak or smell of fuel. Included in this system is our dual pump return style wiring harness which is plug and play with the DivisionX S197-C fuel hat. The triple pump wiring harness is available as an upgrade for those looking to run 3 pumps.\u003cbr\u003e\n\u003cbr\u003e\nWhy go with this system as opposed to others that use a factory style fuel hat and pump setup? This system has much more capability than other kits on the market and as mentioned can easily be upgraded to a triple pump setup. Our competitors systems are stuck using only 2 inferior fuel pumps where this system has the option to use up to three of the top notch pump offerings from Walbro.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eWhat's Included?:\u003c\/strong\u003e\u003cbr\u003e\nDivisonX S197-C Triple Pump Fuel Hat\u003cbr\u003e\nDivisionX Billet 5.0L Coyote Fuel Rails\u003cbr\u003e\nAeromotive X1 Series Pro EFI Bypass Regulator (with fuel pressure gauge)\u003cbr\u003e\nDivisionX Dual Triple Pump Return Style Wiring Harness\u003cbr\u003e\nDivisionX High Flow Fuel Filter (Stainless Washable E85 Compatible Element Optional)\u003cbr\u003e\nWalbro F90000267 465lph E85 Approved Fuel Pumps (upgradable)\u003cbr\u003e\nFragola Pre-Assembled PTFE Feed and Return Lines\u003cbr\u003e\nAll Fittings and Hardware Needed for Installation\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor more info, check out our full write-up \u003ca href=\"https:\/\/www.lethalperformance.com\/info\/l1andl2systems\" target=\"_blank\"\u003eHERE!\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eLooking for instructions? \u003ca href=\"https:\/\/www.lethalperformance.com\/pages\/fuel-system-installation-instructions\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e","brand":"Lethal Performance","offers":[{"title":"Default Title","offer_id":48150227321090,"sku":"LP-FS-1117L2RETURN","price":1954.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/1117_lvl2_1.jpg?v=1785025965"},{"product_id":"lethal-performance-2011-2017-mustang-gt-level-1-level-2-fuel-system-upgrade-kit","title":"2011-2017 Mustang GT Level 1 - Level 2 Fuel System Upgrade Kit","description":"\u003cdiv class=\"video-container\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/46awzbN61Bc\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003cp\u003eThe Level 2 system varies from the Level 1 system as it no longer uses your stock fuel rails in a deadhead configuatrion. Instead it now uses a set of the DivisionX billet Coyote fuel rails and is run in a traditional style routing for the hoses. We accomplish this by using a Y-block at the end of the main feed line which then feeds each aftermarket fuel rail from the rear. We then leave each rail from the front and feed the Aeromotive X1 Series Pro EFI Bypass Regulator where the fuel is regulated and then returned to the tank. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included?:\u003c\/strong\u003e\u003cbr\u003eDivisionX Billet 5.0L Coyote Fuel Rails\u003cbr\u003eAeromotive X1 Series Pro EFI Bypass Regulator Upgrade Kit\u003cbr\u003eFragola Pre-Assembled PTFE Feed and Return Lines\u003cbr\u003eAll Fittings and Hardware Needed for Installation\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFor more info, check out our full write-up \u003ca href=\"https:\/\/www.lethalperformance.com\/info\/l1andl2systems\" target=\"_blank\"\u003eHERE!\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e","brand":"Lethal Performance","offers":[{"title":"Default Title","offer_id":48150228369666,"sku":"LP-FS-1117L1L2UPGRADE","price":585.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/coyotelevel2diagram_2.jpg?v=1785025974"},{"product_id":"lethal-performance-2011-2017-mustang-gt-gt350-level-2-return-style-fuel-system-vmp-supercharger-with-rails","title":"2011-2017 Mustang GT \u0026 GT350 Level 2 Return Style Fuel System (VMP Supercharger with Rails)","description":"\u003cdiv class=\"video-container\"\u003e\u003ciframe frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/46awzbN61Bc\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003eAre you running out of fuel with your current combo or simply looking to support more power or different fuel types without breaking the bank? We've got the solution for you. The all new Level 2 Return style fuel system for your 2011-2017 Ford Mustang GT is exactly what you need. The Level 2 system varies from the Level 1 system as it no longer uses your stock fuel rails in a deadhead configuration. Instead it now uses the fuel rails supplied with your VMP supercharger kit and is run in a traditional style routing for the hoses. We accomplish this by using a Y-block at the end of the main feed line which then feeds each aftermarket fuel rail from the rear. We then leave each rail from the front and feed the Aeromotive X1 Series Pro EFI Bypass Regulator where the fuel is regulated and then returned to the tank. \u003cbr\u003e\n\u003cbr\u003e\nUtilizing the DivisionX S197\/S550 billet fuel hat as the systems backbone you can run up to 3 pumps based on what type of power you're looking to support and what fuel you'll be using. We then run a 8an feed line to our aftermarket fuel filter and from there the Aeromotive X1 Series Pro EFI bypass regulator. Our Level 2 system uses all Fragola PTFE fuel hoses which are pre-assembled and won't leak or smell of fuel. Included in this system is our dual pump return style wiring harness which is plug and play with the DivisionX S197\/S550 fuel hat. The triple pump wiring harness is available as an upgrade for those looking to run 3 pumps (now or later!).\u003cbr\u003e\n\u003cbr\u003e\nWhy go with this system as opposed to others that use a factory style fuel hat and pump setup? This system has much more capability than other kits on the market and as mentioned can easily be upgraded to a triple pump setup. Our competitors systems are stuck using only 2 inferior fuel pumps where this system has the option to use up to three of the top notch pump offerings from Walbro.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eWhat's Included?:\u003c\/strong\u003e\u003cbr\u003e\nDivisonX S197\/S550 Coyote Triple Pump Fuel Hat\u003cbr\u003e\nAeromotive X1 Series Pro EFI Bypass Regulator (with fuel pressure gauge)\u003cbr\u003e\nDivisionX Triple Pump Return Style Wiring Harness\u003cbr\u003e\nDivisionX High Flow Fuel Filter (Stainless Washable E85 Compatible Element Optional)\u003cbr\u003e\nWalbro F90000267 465lph E85 Approved Fuel Pumps\u003cbr\u003e\nFragola Pre-Assembled PTFE Feed and Return Lines\u003cbr\u003e\nAll Fittings and Hardware Needed for Installation\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor more info, check out our full write-up \u003ca href=\"https:\/\/www.lethalperformance.com\/info\/l1andl2systems\" target=\"_blank\"\u003eHERE!\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: \u003cspan\u003eFUEL RAILS NOT INCLUDED.\u003c\/span\u003e\u003cspan\u003eVMP 2300 \u0026amp; 2650  kits come with return fuel rails. \u003c\/span\u003e\u003cspan\u003eRoush 2300 requires fuel rails\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eLooking for instructions? \u003ca href=\"https:\/\/www.lethalperformance.com\/pages\/fuel-system-installation-instructions\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e","brand":"Lethal Performance","offers":[{"title":"Default Title","offer_id":48150229451010,"sku":"LP-FS-1117L2RETURN-VMP","price":1784.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/1117_lvl2_norails_1.jpg?v=1785025981"},{"product_id":"lethal-performance-level-1-2018-2023-mustang-gt-return-style-fuel-system-edelbrock-supercharger-configuration","title":"Level 1 2018-2023 Mustang GT Return Style Fuel System (Edelbrock Supercharger Configuration)","description":"\u003cp\u003eThe Lethal Performance Level 1 2018-2023 return style fuel system was designed for those looking to make big power as well as have the option to run different fuel types. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\nThis is a single regulator fuel system which feeds the DI pump and fuel rails from a Y-block. Fuel is then regulated by the Aeromotive fuel pressure regulator on the drivers side and returned back to the fuel tank. \u003cbr\u003e\n\u003cbr\u003e\nFragola pre-assembled PTFE lined hoses are used for the hose routing. The Fragola PTFE hoses not only look good and are easy to install, but they also don't have any fuel weep or smell to them whether you run pump gas or Ethanol based fuels. The PTFE fuel hoses are also covered in a black coating to help prevent the stainless outer braid from rubbing or scratching any part of your vehicle.\u003cbr\u003e\n\u003cbr\u003e\nWiring for this system is super easy with the provided Lethal Performance Triple pump fuel wiring harness. Our triple pump wiring harness features high quality wires\/components, 3 40amp relays which are all individually fused and the main power from the battery is also protected by a fusible link.\u003cbr\u003e\n\u003cbr\u003e\nThis fuel system will work with gasoline, race fuels and Ethanol based fuels such as E85.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003cbr\u003e\nDivisionX Fuel Hat (Run up to 3 pumps)\u003cbr\u003e\n\u003cspan data-sheets-value=\"{\" walbro f90000267 e85 approved fuel pumps data-sheets-userformat=\"{\"\u003e2 Walbro F90000267 465lph E85 Approved Fuel Pumps (upgradable)\u003c\/span\u003e\u003cbr\u003e\nDivisionX High Flow Fuel Filter (Optional Stainless \/ Washable Filter Element for E85 and other fuel types)\u003cbr\u003e\nLethal Performance Dual Pump Return Style Wiring Harness (Upgradable to Triple Pump)\u003cbr\u003e\nDivisionX 13143 Extreme Flow 2-Port Regulator\u003cbr\u003e\nEdelbrock SC Specific Pre-Assembled Fragola PTFE Lined Black Coated Fuel Hose\u003cbr\u003e\nFragola Performance Fuel Fittings, Vacuum Hose, Zip Ties, Loom Clamps, Self -Tapping Screws and T-Fitting\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNOTE: This system is to be used with the fuel rails provided in the Edelbrock Supercharger Kit. To use this system on a car equipped with the stock 2018+ Mustang GT fuel rails you'll want to choose the system specific to the stock manifold\/fuel rails.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLooking for instructions? \u003ca href=\"https:\/\/www.lethalperformance.com\/pages\/fuel-system-installation-instructions\"\u003eClick here\u003c\/a\u003e.\u003c\/p\u003e","brand":"Lethal Performance","offers":[{"title":"Default Title","offer_id":48150230466818,"sku":"LP-FS-2018GTL1-EDL","price":1827.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/18_fs_level11_whpedl_1.jpg?v=1785025991"}],"url":"https:\/\/www.lethalperformance.com\/collections\/divisionx-2015-2023-mustang.oembed","provider":"Lethal Performance","version":"1.0","type":"link"}