{"title":"Coyote Swap Parts","description":"\u003ch1\u003ecoyote-swap-parts\u003c\/h1\u003e","products":[{"product_id":"power-by-the-hour-acc-1001-an-adaptor-block-for-ac-compressor","title":"Power by The Hour ACC-1001 AN Adaptor Block for AC Compressor","description":"Adapt the 1996-2010 AC compressor that we use with our Coyote Swap Accessory Drive Bracket kit to AN with this Compressor Block.  Bolts on like a factory manifold line and supplies a -8an (3\/4-16 thread) and -10an (7\/8-14 thread).\u003cbr\u003e\u003cbr\u003e*Fits FS10 Compressor – 4.6L 6.8L V8 \u0026amp; V10 Engines. Allows you to adapt Standard NO 8 (3\/4 – 16 thread) \u0026amp; NO 10 (7\/8-14) Female O-ring Fitting.\u003cbr\u003e\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48141436223746,"sku":"PBH-ACC-1001","price":81.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/acc-1001.jpg?v=1784984118"},{"product_id":"power-by-the-hour-pbh-1100-speed-drive-alternator-relocation-for-n-a-5-0l-coyote","title":"Power by The Hour PBH-1100 Speed Drive Alternator Relocation for N\/A 5.0L Coyote","description":"We have a new version of our popular Coyote Swap engine bracket kit. This version is designed to just relocate the stock 11-up Mustang GT Coyote engine alternator to a higher position. Why would you want to do this? we have used it on several custom builds that include forward facing headers for turbo systems and for custom cars where the frame rails are really tight.\u003cbr\u003e\u003cbr\u003eThis is done by using our proven Coyote Engine Swap Alternator bracket along with some custom length belts. We move the stock alternator from the bottom driver side of the engine to the upper passenger side. Two belts are provided; one to drive the water pump and one to drive the alternator. Along with the belts you get both tensioners, ribbed pulley for the driver side tensioners, and idler pulley. Detailed instructions and hardware are included in the kit as well.\u003cbr\u003e\u003cbr\u003eThis in no way is a replacement for our current Accessory Drive Bracket kit, this is a custom variation designed to run just the alternator in a new location.","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48141436551426,"sku":"PBH-1100","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/untitled-2.jpg?v=1784984117"},{"product_id":"power-by-the-hour-pcp-1116b-gen-1-coyote-body-harness","title":"Power by The Hour PCP-1116B GEN 1 Coyote Body Harness","description":"\u003cp\u003eThe Power By The Hour Performance Gen 1 body harness has been updated. The PCP-1116B now not only allows easy integration of the 6R80 Automatic transmission, it also now is compatible with manual transmissions and independently controlled automatic transmissions as well. We added the needed wiring to ensure that if you are going manual or auto only one body harness is needed. Additionally, this harness is also compatible with use with all 2007-14 GT500 5.4L engines.\u003cbr\u003e\u003cbr\u003eThis is a great option for anyone purchasing used powertrains, crank a palet’s, and used engines. In most cases you receive the pcm, sensors, and pedal needed to run the engines but are missing the wiring. This harness will allow you to finish the job without having to purchase pricey control packs.\u003cbr\u003e\u003cbr\u003eKey features of the PBH 6R80 Harness are below:\u003cbr\u003e*labeled wiring leads for fuel pump, cooling fan, starter trigger, and battery power hookup\u003cbr\u003e*OEM connectors\u003cbr\u003e*select shift wiring for easy integration to aftermarket and custom shifters\u003cbr\u003e*detachable fuse box\u003cbr\u003e*works with 11-14 Mustang GT, F150, and GT500 PCM new or used.\u003cbr\u003e*detailed instructions and oem function\u003cbr\u003e*designed specifically for Coyote and GT500 powered projects\u003cbr\u003e*no horsepower limitations\u003cbr\u003e\u003cbr\u003eCompatibility:\u003cbr\u003e*2011 2012 2013 2014  Coyote, Roadrunner, and F150 Coyote V8 engines\u003cbr\u003e*2007 2008 2009 2010 2011 2012 2013 2014 GT500 V8 engines with 11-14 model engine harness only\u003cbr\u003e*2011-newer Mustang 6R80 transmissions\u003cbr\u003e*All manual transmissions\u003cbr\u003e*All independently controlled or manually shifted automatic transmissions\u003cbr\u003e*2011-up F150 6r80 transmissions\u003c\/p\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48141436944642,"sku":"PBH-PCP-1116B","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/6r80-control-packs-coyote-engine-swaps.jpg?v=1784984117"},{"product_id":"power-by-the-hour-sanden-sd7-an-fitting-kit-pbh-acc-1117","title":"Power By The Hour Sanden SD7 AN fitting kit - PBH-ACC-1117","description":"Power By The Hour Sanden SD7 AN fitting kit - PBH-ACC-1117\u003cbr\u003e\u003cbr\u003eVintage Air O-ring adapters are offered in #8 and #10 sizes to fit your \ncompact high performance Sanden SD 7 compressor. Used in the PBH Speed \nDrive systems, these refrigerant line O-ring adapters are available in a \nnatural finish.\u003cbr\u003e\u003cbr\u003eWith these fittings custom AC lines can be used with the SD7 compressor for \nany application.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142894727426,"sku":"PBH-ACC-1117","price":44.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/acc-1117perfrect.jpg?v=1784991885"},{"product_id":"power-by-the-hour-sanden-sd7-compressor-in-black-coated-finish-6-rib-pbh-acc-1150","title":"Power By The Hour Sanden SD7 Compressor in Black Coated Finish 6 rib - PBH-SWAP-2303","description":"\u003cp\u003ePower By The Hour Sanden SD7 Compressor in Black Coated Finish 6 rib - PBH-ACC-1150\u003cbr\u003e\n\u003cbr\u003e\nLooking for that custom touch to your Speed Drive with Speed Series pulleys? pick up this black finished Sanden SD7 compressor to match our pulleys.\u003cbr\u003e\n\u003cbr\u003e\nThe compressor is the same as our raw finished design but in black. You can also pick up the an fitting kit listed below to help making custom lines a breeze.\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLethal Performance is proud to offer the entire line of products!\u003cbr\u003e\u003c\/p\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142894825730,"sku":"PBH-SWAP-2303","price":549.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/199-104_0118193_d939c002-daac-4552-8b77-668165458e33.jpg?v=1784991889"},{"product_id":"power-by-the-hour-sanden-sd7-compressor-polished-finish-6-rib-pbh-acc-1151","title":"Power By The Hour Sanden SD7 Compressor Polished Finish 6 rib - PBH-ACC-1151","description":"Power By The Hour Sanden SD7 Compressor Polished Finish 6 rib - PBH-ACC-1151\u003cbr\u003e\u003cbr\u003eSanden SD7 Compressor in a Polished finish.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142894956802,"sku":"PBH-ACC-1151","price":466.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/199-10618115.jpg?v=1784991884"},{"product_id":"power-by-the-hour-titefit-compressor-block-fitting-for-sanden-sd7-compressor-pbh-acc-1118","title":"Power By The Hour Titefit Compressor block fitting for Sanden SD7 Compressor - PBH-ACC-1118","description":"Power By The Hour Titefit Compressor block fitting for Sanden SD7 Compressor - PBH-ACC-1118\u003cbr\u003e\u003cbr\u003eSKU: ACC-1118\u003cbr\u003e\u003cbr\u003eCategory: Air Conditioning Fittings and Adapters\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142895087874,"sku":"PBH-ACC-1118","price":82.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/342310.jpg?v=1784991885"},{"product_id":"power-by-the-hour-pbh-coyote-swap-speed-drive-whipple-supercharger-upfit-kit-standard-profile-pbh-102u","title":"Power By The Hour PBH Coyote Swap Speed Drive Whipple Supercharger upfit kit - Standard Profile - PBH-102U","description":"Power By The Hour PBH Coyote Swap Speed Drive Whipple Supercharger upfit kit - Standard Profile - PBH-102U\u003cbr\u003e\u003cbr\u003eThis kit from PBH is designed to install the Front Feed Whipple \nSupercharger your PBH accessory bracket equipped coyote engine. What this \nmeans is if you already have our NA kit and want to go to the Front Feed \nWhipple Supercharger, this kit will supply the needed items to do so. \nIncluded is a custom PBH Whipple Idler Bracket, Alternator bracket, stand \noff, hardware, belt, and detailed instructions. With it installed you will \nbe able to use the Front Feed Whipple Supercharger with our existing \ntensioners, power steering pump, and ac compressor brackets. So when \nupgrading to the Whipple, none of your power steering or ac components will \nchange.\u003cbr\u003e\u003cbr\u003eSome of the components from your Whipple kit will be omitted with the \ninstallation of this setup. Items like the Whipple supplied idler bracket, \ntensioner, and a series of hardware. We also offer the Front Feed Whippler \nSupercharger with brackets as a kit. For that information, click here. It \nis the most cost effective way to get a brand new supercharger for your \nswap.\u003cbr\u003e\u003cbr\u003eYour existing PBH Power Steering Bracket can either be Standard Profile or \nLow Profile. It is important to know which one you have as it will impact \nthe belt length included in the upfit kit. Reference the photo in our \ngallery to see which one you have before ordering. Standard Profile \nbrackets have a logo facing the driver side exhaust manifold while the Low \nProfile bracket has the log on the spine facing forward towards the \nradiator.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142895120642,"sku":"PBH-102U","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/altbracketwithidleronly-700x525.jpg?v=1784991889"},{"product_id":"power-by-the-hour-edelbrock-2650-speed-drive-upfit-kit-pbh-105b","title":"Power By The Hour Edelbrock 2650 Speed Drive Upfit Kit - 8 Rib - PBH-105B","description":"Power By The Hour Edelbrock 2650 Speed Drive Upfit Kit - PBH-105B\u003cbr\u003e\u003cbr\u003eIf you already have a PBH Speed Drive on your Naturally Aspirated Coyote, \nthis upfit kit is what you need to adapt it to work with the Edelbrock 2650 \nSupercharger. The upfit kit comes with the needed parts to turn your NA \nSpeed Drive into a Edelbrock 2650 Speed Drive.\u003cbr\u003e\u003cbr\u003eThe contents of the kit will vary based on which version of our NA Speed \nDrive you already have. We have had two versions of our Alternator bracket. \nOne was sold before 2\/20\/20 and had 6 holes in the bracket and the other \nwas an update that was sold after 2\/20\/20 which only had 5 holes in the \nbracket. Identify which one you have already to ensure you get every  piece \nyou need for your installation.\u003cbr\u003e\u003cbr\u003eWe also offer this in either 6 or 8 rib versions.\u003cbr\u003e\u003cbr\u003eInstallation of this kit will not disrupt or preposition the power steering \npump or ac compressor.\u003cbr\u003e\u003cbr\u003eContents of the kit:\u003cbr\u003e\u003cbr\u003e-alternator bracket(based on production date)\u003cbr\u003e\u003cbr\u003e-idler pulley bracket and hardware\u003cbr\u003e\u003cbr\u003e-idler pulleys\u003cbr\u003e\u003cbr\u003e-6 or 8 rib water pump pulley\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142895153410,"sku":"PBH-105B","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/edb-upfit-700x722_1.jpg?v=1784991887"},{"product_id":"power-by-the-hour-edelbrock-2650-speed-drive-upfit-kit-pbh-105d","title":"Power By The Hour Edelbrock 2650 Speed Drive Upfit Kit - PBH-105D","description":"Power By The Hour Edelbrock 2650 Speed Drive Upfit Kit - PBH-105D\u003cbr\u003e\u003cbr\u003eIf you already have a PBH Speed Drive on your Naturally Aspirated Coyote, \nthis upfit kit is what you need to adapt it to work with the Edelbrock 2650 \nSupercharger. The upfit kit comes with the needed parts to turn your NA \nSpeed Drive into a Edelbrock 2650 Speed Drive.\u003cbr\u003e\u003cbr\u003eThe contents of the kit will vary based on which version of our NA Speed \nDrive you already have. We have had two versions of our Alternator bracket. \nOne was sold before 2\/20\/20 and had 6 holes in the bracket and the other \nwas an update that was sold after 2\/20\/20 which only had 5 holes in the \nbracket. Identify which one you have already to ensure you get every  piece \nyou need for your installation.\u003cbr\u003e\u003cbr\u003eWe also offer this in either 6 or 8 rib versions.\u003cbr\u003e\u003cbr\u003eInstallation of this kit will not disrupt or preposition the power steering \npump or ac compressor.\u003cbr\u003e\u003cbr\u003eContents of the kit:\u003cbr\u003e\u003cbr\u003e-alternator bracket(based on production date)\u003cbr\u003e\u003cbr\u003e-idler pulley bracket and hardware\u003cbr\u003e\u003cbr\u003e-idler pulleys\u003cbr\u003e\u003cbr\u003e-6 or 8 rib water pump pulley\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142895251714,"sku":"PBH-105D","price":519.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/edb-upfit-700x722_3.jpg?v=1784991888"},{"product_id":"power-by-the-hour-speed-drive-for-naturally-aspirated-5-0l-coyote-std-mod-ford-ps-sd7-ac-pbh-1112","title":"Power By The Hour Speed Drive For Naturally Aspirated 5.0L Coyote -std mod ford ps sd7 ac - PBH-1112","description":"Power By The Hour Speed Drive For Naturally Aspirated 5.0L Coyote -std mod ford ps sd7 ac - PBH-1112\u003cbr\u003e\u003cbr\u003eThe best way to make sure your coyote swap will be successful is to buy the \nright parts. We have been manufacturing coyote swap specific parts since \n2013 and our coyote swap acessory drive brackets, known as the PBH Speed \nDrive,  have been our most popular item. Designed to use factory modular \nFord Power Steering pumps from 1996-2010 Mustang GT along side the 2011-up \nMustang Coyote Alternator. Additionally, you have the option for both the \nModular Ford and Sanden SD7 7176 Air Compressor.  This combo delivers a \nvery oem finish with easy to get parts.\u003cbr\u003e\u003cbr\u003eThe PBH Speed Drive’s allow the builder the opportunity to configure the \naccessory drive many ways. Our system is designed to add add a power \nsteering pump, maintain an air compressor, relocate the alternator, and \nmore. Not only onto the coyote engine but put them in their stock \nlocations. For 1979-2010 Mustang owners looking to swap this means that \nstock AC and power steering lines can be reused or added for donor \nvehicles. Dont have a 79-10 Mustang? not to worry, we have super low \nprofile options that will allow use in the tightest of chassis and vintage \ncars\/trucks. Accessories like the Power Steering pump, alternator, and AC \nCompressor are not included but can be added to the Speed Drive’s.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142895284482,"sku":"PBH-1112","price":819.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/pbh-1122clean-700x394_4.png?v=1784991894"},{"product_id":"power-by-the-hour-speed-drive-for-naturally-aspirated-5-0l-coyote-sd7-ac-ps-delete-pbh-1102","title":"Power By The Hour Speed Drive For Naturally Aspirated 5.0L Coyote- sd7 ac ps delete - PBH-1102","description":"Power By The Hour Speed Drive For Naturally Aspirated 5.0L Coyote- sd7 ac ps delete - PBH-1102\u003cbr\u003e\u003cbr\u003eThe best way to make sure your coyote swap will be successful is to buy the \nright parts. We have been manufacturing coyote swap specific parts since \n2013 and our coyote swap acessory drive brackets, known as the PBH Speed \nDrive,  have been our most popular item. Designed to use factory modular \nFord Power Steering pumps from 1996-2010 Mustang GT along side the 2011-up \nMustang Coyote Alternator. Additionally, you have the option for both the \nModular Ford and Sanden SD7 7176 Air Compressor.  This combo delivers a \nvery oem finish with easy to get parts.\u003cbr\u003e\u003cbr\u003eThe PBH Speed Drive’s allow the builder the opportunity to configure the \naccessory drive many ways. Our system is designed to add add a power \nsteering pump, maintain an air compressor, relocate the alternator, and \nmore. Not only onto the coyote engine but put them in their stock \nlocations. For 1979-2010 Mustang owners looking to swap this means that \nstock AC and power steering lines can be reused or added for donor \nvehicles. Dont have a 79-10 Mustang? not to worry, we have super low \nprofile options that will allow use in the tightest of chassis and vintage \ncars\/trucks. Accessories like the Power Steering pump, alternator, and AC \nCompressor are not included but can be added to the Speed Drive’s.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142895317250,"sku":"PBH-1102","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/pbh-1122clean-700x394_1.png?v=1784991887"},{"product_id":"power-by-the-hour-speed-drive-for-naturally-aspirated-5-0l-coyote-low-profile-mod-ford-ps-mod-ford-ac-pbh-1121","title":"Power By The Hour Speed Drive For Naturally Aspirated 5.0L Coyote - low profile mod ford ps mod ford ac - PBH-1121","description":"Power By The Hour Speed Drive For Naturally Aspirated 5.0L Coyote - low profile mod ford ps mod ford ac - PBH-1121\u003cbr\u003e\u003cbr\u003eThe best way to make sure your coyote swap will be successful is to buy the \nright parts. We have been manufacturing coyote swap specific parts since \n2013 and our coyote swap acessory drive brackets, known as the PBH Speed \nDrive,  have been our most popular item. Designed to use factory modular \nFord Power Steering pumps from 1996-2010 Mustang GT along side the 2011-up \nMustang Coyote Alternator. Additionally, you have the option for both the \nModular Ford and Sanden SD7 7176 Air Compressor.  This combo delivers a \nvery oem finish with easy to get parts.\u003cbr\u003e\u003cbr\u003eThe PBH Speed Drive’s allow the builder the opportunity to configure the \naccessory drive many ways. Our system is designed to add add a power \nsteering pump, maintain an air compressor, relocate the alternator, and \nmore. Not only onto the coyote engine but put them in their stock \nlocations. For 1979-2010 Mustang owners looking to swap this means that \nstock AC and power steering lines can be reused or added for donor \nvehicles. Dont have a 79-10 Mustang? not to worry, we have super low \nprofile options that will allow use in the tightest of chassis and vintage \ncars\/trucks. Accessories like the Power Steering pump, alternator, and AC \nCompressor are not included but can be added to the Speed Drive’s.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142895350018,"sku":"PBH-1121","price":819.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/pbh-1122clean-700x394_6.png?v=1784991888"},{"product_id":"power-by-the-hour-mustang-power-steering-rack-an-fitting-kit-pbh-664","title":"Power By The Hour Mustang Power Steering Rack AN Fitting Kit - PBH-664","description":"\u003cp\u003ePower By The Hour Mustang Power Steering Rack AN Fitting Kit - PBH-664\u003cbr\u003e\n\u003cbr\u003e\nFittings allow attaching -6 AN hoses to a 1979-2004 Mustang steering rack.\u003cbr\u003e\n\u003cbr\u003e\nRecently redesigned by MM’s Engineering team.Fittings have correct thread diameter, thread pitch, and interface design to thread directly into a 1979-2004 Mustang power steering rack.Opposite end of each fitting is machined as male -6 AN.Allows use of AN-style hose with readily available -6 AN fittings.Makes future maintenance easier.Zinc-plated steelIncludes PTFE O-ring seals.Includes hydraulic sealant as a secondary seal.Does not include AN hoses or steering pump fitting.Makes future maintenance much easier, as these adapters can remain threaded into the rack while the hoses are disconnected at the AN connection, eliminating a common leak source.Allows use of durable braided stainless steel hoses.Mates to common -6 AN fittings.Zinc-plated steel adapter fittings designed just for this application.Includes PTFE O-ring seals.Includes hydraulic sealant as a secondary seal.\u003cbr\u003e\n\u003cbr\u003e\nFits\u003cbr\u003e\n\u003cbr\u003e\nAll 1979-2004 Mustang power steering racks 1983-88 T-Bird power steering rack\u003cbr\u003e\n\u003cbr\u003e\nDoes NOT fit Flaming River power steering rack.\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLethal Performance is proud to offer the entire line of products!\u003cbr\u003e\u003c\/p\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142895382786,"sku":"PBH-664","price":54.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/pbh-664.png?v=1784991884"},{"product_id":"power-by-the-hour-gen-1-2011-14-5-0l-coyote-engine-harness-pbh-1120","title":"Power By The Hour Gen 1 2011-14 5.0L Coyote Engine Harness - PCP-1120","description":"\u003cdiv\u003eFits 2011-2014 Coyote 5.0L engine with Boss 302 or CJ intake manifold\u003c\/div\u003e\n\u003cdiv\u003e2\/27\/12 and newer VCT solenoids BR3Z-6M280-D required\u003c\/div\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142895415554,"sku":"PBH-PCP-1120","price":302.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/m-12508-m50_1.jpg?v=1784991886"},{"product_id":"power-by-the-hour-speed-drive-for-naturally-aspirated-5-0l-coyote-mod-ac-ps-delete-pbh-1101","title":"Power By The Hour Speed Drive For Naturally Aspirated 5.0L Coyote- mod ac ps delete - PBH-1101","description":"\u003cp\u003ePower By The Hour Speed Drive For Naturally Aspirated 5.0L Coyote- mod ac ps delete - PBH-1101\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote: This kit is a power steering delete and meant to be used with a Sanden pump.\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\nThe best way to make sure your coyote swap will be successful is to buy the right parts. We have been manufacturing coyote swap specific parts since 2013 and our coyote swap acessory drive brackets, known as the PBH Speed Drive, have been our most popular item. Designed to use factory modular Ford Power Steering pumps from 1996-2010 Mustang GT along side the 2011-up Mustang Coyote Alternator. Additionally, you have the option for both the Modular Ford and Sanden SD7 7176 Air Compressor. This combo delivers a very oem finish with easy to get parts.\u003cbr\u003e\n\u003cbr\u003e\nThe PBH Speed Drive’s allow the builder the opportunity to configure the accessory drive many ways. maintain an air compressor, relocate the alternator, and more. Not only onto the coyote engine but put them in their stock locations. For 1979-2010 Mustang owners looking to swap this means that stock AC and power steering lines can be reused or added for donor vehicles. Dont have a 79-10 Mustang? not to worry, we have super low profile options that will allow use in the tightest of chassis and vintage cars\/trucks. Accessories like the Power Steering pump, alternator, and AC Compressor are not included but can be added to the Speed Drive’s.\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLethal Performance is proud to offer the entire line of products!\u003cbr\u003e\u003c\/p\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142895448322,"sku":"PBH-1101","price":599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/pbh-1122clean-700x394.png?v=1784991889"},{"product_id":"power-by-the-hour-speed-drive-for-naturally-aspirated-5-0l-coyote-std-mod-ps-ac-delete-pbh-1110","title":"Power By The Hour Speed Drive for naturally aspirated 5.0L coyote - std mod ps ac delete - PBH-1110","description":"Power By The Hour Speed Drive for naturally aspirated 5.0L coyote - std mod ps ac delete - PBH-1110\u003cbr\u003e\u003cbr\u003eThe best way to make sure your coyote swap will be successful is to buy the \nright parts. We have been manufacturing coyote swap specific parts since \n2013 and our coyote swap acessory drive brackets, known as the PBH Speed \nDrive,  have been our most popular item. Designed to use factory modular \nFord Power Steering pumps from 1996-2010 Mustang GT along side the 2011-up \nMustang Coyote Alternator. Additionally, you have the option for both the \nModular Ford and Sanden SD7 7176 Air Compressor.  This combo delivers a \nvery oem finish with easy to get parts.\u003cbr\u003e\u003cbr\u003eThe PBH Speed Drive’s allow the builder the opportunity to configure the \naccessory drive many ways. Our system is designed to add add a power \nsteering pump, maintain an air compressor, relocate the alternator, and \nmore. Not only onto the coyote engine but put them in their stock \nlocations. For 1979-2010 Mustang owners looking to swap this means that \nstock AC and power steering lines can be reused or added for donor \nvehicles. Dont have a 79-10 Mustang? not to worry, we have super low \nprofile options that will allow use in the tightest of chassis and vintage \ncars\/trucks. Accessories like the Power Steering pump, alternator, and AC \nCompressor are not included but can be added to the Speed Drive’s.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142895481090,"sku":"PBH-1110","price":719.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/pbh-1122clean-700x394_2.png?v=1784991888"},{"product_id":"power-by-the-hour-speed-drive-for-naturally-aspirated-5-0l-coyote-gm-type-ii-ps-ac-delete-pbh-1130","title":"Power By The Hour Speed Drive For Naturally Aspirated 5.0L coyote GM Type II ps ac delete - PBH-1130","description":"Power By The Hour Speed Drive For Naturally Aspirated 5.0L coyote GM Type II ps ac delete - PBH-1130\u003cbr\u003e\u003cbr\u003eThe best way to make sure your coyote swap will be successful is to buy the \nright parts. We have been manufacturing coyote swap specific parts since \n2013 and our coyote swap acessory drive brackets, known as the PBH Speed \nDrive,  have been our most popular item. Designed to use factory modular \nFord Power Steering pumps from 1996-2010 Mustang GT along side the 2011-up \nMustang Coyote Alternator. Additionally, you have the option for both the \nModular Ford and Sanden SD7 7176 Air Compressor.  This combo delivers a \nvery oem finish with easy to get parts.\u003cbr\u003e\u003cbr\u003eThe PBH Speed Drive’s allow the builder the opportunity to configure the \naccessory drive many ways. Our system is designed to add add a power \nsteering pump, maintain an air compressor, relocate the alternator, and \nmore. Not only onto the coyote engine but put them in their stock \nlocations. For 1979-2010 Mustang owners looking to swap this means that \nstock AC and power steering lines can be reused or added for donor \nvehicles. Dont have a 79-10 Mustang? not to worry, we have super low \nprofile options that will allow use in the tightest of chassis and vintage \ncars\/trucks. Accessories like the Power Steering pump, alternator, and AC \nCompressor are not included but can be added to the Speed Drive’s.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142895513858,"sku":"PBH-1130","price":709.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/pbh-1122clean-700x394_8.png?v=1784991893"},{"product_id":"power-by-the-hour-speed-drive-for-roush-vmp-supercharged-5-0l-coyote-lp-mod-ford-ps-mod-ford-ac-pbh-1221","title":"Power By The Hour Speed Drive for Roush\/VMP Supercharged 5.0L Coyote LP MOD FORD PS MOD FORD AC - PBH-1221","description":"Power By The Hour Speed Drive for Roush\/VMP Supercharged 5.0L Coyote LP MOD FORD PS MOD FORD AC - PBH-1221\u003cbr\u003e\u003cbr\u003eThe best way to make sure your coyote swap will be successful is to buy the \nright parts. We have been manufacturing coyote swap specific parts since \n2013 and our coyote swap acessory drive brackets, known as the PBH Speed \nDrive,  have been our most popular item. Designed to use factory modular \nFord Power Steering pumps from 1996-2010 Mustang GT along side the 2011-up \nMustang Coyote Alternator. Additionally, you have the option for both the \nModular Ford and Sanden SD7 7176 Air Compressor.  This combo delivers a \nvery oem finish with easy to get parts.\u003cbr\u003e\u003cbr\u003eThe PBH Speed Drive’s allow the builder the opportunity to configure the \naccessory drive many ways. Our system is designed to add add a power \nsteering pump, maintain an air compressor, relocate the alternator, and \nmore. Not only onto the coyote engine but put them in their stock \nlocations. For 1979-2010 Mustang owners looking to swap this means that \nstock AC and power steering lines can be reused or added for donor \nvehicles. Dont have a 79-10 Mustang? not to worry, we have super low \nprofile options that will allow use in the tightest of chassis and vintage \ncars\/trucks. Accessories like the Power Steering pump, alternator, and AC \nCompressor are not included but can be added to the Speed Drive’s.\u003cbr\u003e\u003cbr\u003ePick up a VMP or Roush Supercharger kit and our supercharged bracket kit to \nkeep the same power steering pump and ac compressor while adding the \npositive displacement supercharger. (kit only works with listed \nsuperchargers).\u003cbr\u003e\u003cbr\u003eAll brackets are machined out of billet aluminum and anodized with a black \nfinish.  All brackets were designed to keep the accessories tight to the \nblock. This in turn maximizes room in the engine bay.  Order yours today \nfor your engine swap.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142895579394,"sku":"PBH-1221","price":889.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/vmpfrontclean-700x394_7.png?v=1784991888"},{"product_id":"power-by-the-hour-edelbrock-2650-speed-drive-upfit-kit-pbh-105c","title":"Power By The Hour Edelbrock 2650 Speed Drive Upfit Kit - PBH-105C","description":"Power By The Hour Edelbrock 2650 Speed Drive Upfit Kit - PBH-105C\u003cbr\u003e\u003cbr\u003eIf you already have a PBH Speed Drive on your Naturally Aspirated Coyote, \nthis upfit kit is what you need to adapt it to work with the Edelbrock 2650 \nSupercharger. The upfit kit comes with the needed parts to turn your NA \nSpeed Drive into a Edelbrock 2650 Speed Drive.\u003cbr\u003e\u003cbr\u003eThe contents of the kit will vary based on which version of our NA Speed \nDrive you already have. We have had two versions of our Alternator bracket. \nOne was sold before 2\/20\/20 and had 6 holes in the bracket and the other \nwas an update that was sold after 2\/20\/20 which only had 5 holes in the \nbracket. Identify which one you have already to ensure you get every  piece \nyou need for your installation.\u003cbr\u003e\u003cbr\u003eWe also offer this in either 6 or 8 rib versions.\u003cbr\u003e\u003cbr\u003eInstallation of this kit will not disrupt or preposition the power steering \npump or ac compressor.\u003cbr\u003e\u003cbr\u003eContents of the kit:\u003cbr\u003e\u003cbr\u003e-alternator bracket(based on production date)\u003cbr\u003e\u003cbr\u003e-idler pulley bracket and hardware\u003cbr\u003e\u003cbr\u003e-idler pulleys\u003cbr\u003e\u003cbr\u003e-6 or 8 rib water pump pulley\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142895546626,"sku":"PBH-105C","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/edb-upfit-700x722_2.jpg?v=1784991888"},{"product_id":"power-by-the-hour-speed-drive-for-naturally-aspirated-5-0l-coyote-gm-type-ii-ps-sd7-ac-pbh-1132","title":"Power By The Hour Speed Drive For Naturally Aspirated 5.0L Coyote GM Type II PS SD7 AC - PBH-1132","description":"Power By The Hour Speed Drive For Naturally Aspirated 5.0L Coyote GM Type II PS SD7 AC - PBH-1132\u003cbr\u003e\u003cbr\u003eThe best way to make sure your coyote swap will be successful is to buy the \nright parts. We have been manufacturing coyote swap specific parts since \n2013 and our coyote swap acessory drive brackets, known as the PBH Speed \nDrive,  have been our most popular item. Designed to use factory modular \nFord Power Steering pumps from 1996-2010 Mustang GT along side the 2011-up \nMustang Coyote Alternator. Additionally, you have the option for both the \nModular Ford and Sanden SD7 7176 Air Compressor.  This combo delivers a \nvery oem finish with easy to get parts.\u003cbr\u003e\u003cbr\u003eThe PBH Speed Drive’s allow the builder the opportunity to configure the \naccessory drive many ways. Our system is designed to add add a power \nsteering pump, maintain an air compressor, relocate the alternator, and \nmore. Not only onto the coyote engine but put them in their stock \nlocations. For 1979-2010 Mustang owners looking to swap this means that \nstock AC and power steering lines can be reused or added for donor \nvehicles. Dont have a 79-10 Mustang? not to worry, we have super low \nprofile options that will allow use in the tightest of chassis and vintage \ncars\/trucks. Accessories like the Power Steering pump, alternator, and AC \nCompressor are not included but can be added to the Speed Drive’s.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142895612162,"sku":"PBH-1132","price":839.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/pbh-1122clean-700x394_10.png?v=1784991892"},{"product_id":"power-by-the-hour-speed-drive-for-roush-vmp-supercharged-5-0l-coyote-ps-delete-sd7-ac-pbh-1202","title":"Power By The Hour Speed Drive for Roush\/VMP Supercharged 5.0L Coyote PS DELETE SD7 AC - PBH-1202","description":"Power By The Hour Speed Drive for Roush\/VMP Supercharged 5.0L Coyote PS DELETE SD7 AC - PBH-1202\u003cbr\u003e\u003cbr\u003eThe best way to make sure your coyote swap will be successful is to buy the \nright parts. We have been manufacturing coyote swap specific parts since \n2013 and our coyote swap acessory drive brackets, known as the PBH Speed \nDrive,  have been our most popular item. Designed to use factory modular \nFord Power Steering pumps from 1996-2010 Mustang GT along side the 2011-up \nMustang Coyote Alternator. Additionally, you have the option for both the \nModular Ford and Sanden SD7 7176 Air Compressor.  This combo delivers a \nvery oem finish with easy to get parts.\u003cbr\u003e\u003cbr\u003eThe PBH Speed Drive’s allow the builder the opportunity to configure the \naccessory drive many ways. Our system is designed to add add a power \nsteering pump, maintain an air compressor, relocate the alternator, and \nmore. Not only onto the coyote engine but put them in their stock \nlocations. For 1979-2010 Mustang owners looking to swap this means that \nstock AC and power steering lines can be reused or added for donor \nvehicles. Dont have a 79-10 Mustang? not to worry, we have super low \nprofile options that will allow use in the tightest of chassis and vintage \ncars\/trucks. Accessories like the Power Steering pump, alternator, and AC \nCompressor are not included but can be added to the Speed Drive’s.\u003cbr\u003e\u003cbr\u003ePick up a VMP or Roush Supercharger kit and our supercharged bracket kit to \nkeep the same power steering pump and ac compressor while adding the \npositive displacement supercharger. (kit only works with listed \nsuperchargers).\u003cbr\u003e\u003cbr\u003eAll brackets are machined out of billet aluminum and anodized with a black \nfinish.  All brackets were designed to keep the accessories tight to the \nblock. This in turn maximizes room in the engine bay.  Order yours today \nfor your engine swap.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142895644930,"sku":"PBH-1202","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/vmpfrontclean-700x394_2.png?v=1784991886"},{"product_id":"power-by-the-hour-speed-drive-for-roush-vmp-supercharged-5-0l-coyote-alt-relocation-ps-ac-delete-pbh-1200","title":"Power By The Hour Speed Drive for Roush\/VMP Supercharged 5.0L Coyote ALT RELOCATION PS\/AC DELETE - PBH-1200","description":"Power By The Hour Speed Drive for Roush\/VMP Supercharged 5.0L Coyote ALT RELOCATION PS\/AC DELETE - PBH-1200\u003cbr\u003e\u003cbr\u003eThe best way to make sure your coyote swap will be successful is to buy the \nright parts. We have been manufacturing coyote swap specific parts since \n2013 and our coyote swap acessory drive brackets, known as the PBH Speed \nDrive,  have been our most popular item. Designed to use factory modular \nFord Power Steering pumps from 1996-2010 Mustang GT along side the 2011-up \nMustang Coyote Alternator. Additionally, you have the option for both the \nModular Ford and Sanden SD7 7176 Air Compressor.  This combo delivers a \nvery oem finish with easy to get parts.\u003cbr\u003e\u003cbr\u003eThe PBH Speed Drive’s allow the builder the opportunity to configure the \naccessory drive many ways. Our system is designed to add add a power \nsteering pump, maintain an air compressor, relocate the alternator, and \nmore. Not only onto the coyote engine but put them in their stock \nlocations. For 1979-2010 Mustang owners looking to swap this means that \nstock AC and power steering lines can be reused or added for donor \nvehicles. Dont have a 79-10 Mustang? not to worry, we have super low \nprofile options that will allow use in the tightest of chassis and vintage \ncars\/trucks. Accessories like the Power Steering pump, alternator, and AC \nCompressor are not included but can be added to the Speed Drive’s.\u003cbr\u003e\u003cbr\u003ePick up a VMP or Roush Supercharger kit and our supercharged bracket kit to \nkeep the same power steering pump and ac compressor while adding the \npositive displacement supercharger. (kit only works with listed \nsuperchargers).\u003cbr\u003e\u003cbr\u003eAll brackets are machined out of billet aluminum and anodized with a black \nfinish.  All brackets were designed to keep the accessories tight to the \nblock. This in turn maximizes room in the engine bay.  Order yours today \nfor your engine swap.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142895677698,"sku":"PBH-1200","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/vmpfrontclean-700x394.png?v=1784991888"},{"product_id":"power-by-the-hour-speed-drive-for-roush-vmp-supercharged-5-0l-coyote-ps-delete-mod-ford-ac-pbh-1201","title":"Power By The Hour Speed Drive for Roush\/VMP Supercharged 5.0L Coyote PS DELETE MOD FORD AC - PBH-1201","description":"Power By The Hour Speed Drive for Roush\/VMP Supercharged 5.0L Coyote PS DELETE MOD FORD AC - PBH-1201\u003cbr\u003e\u003cbr\u003eThe best way to make sure your coyote swap will be successful is to buy the \nright parts. We have been manufacturing coyote swap specific parts since \n2013 and our coyote swap acessory drive brackets, known as the PBH Speed \nDrive,  have been our most popular item. Designed to use factory modular \nFord Power Steering pumps from 1996-2010 Mustang GT along side the 2011-up \nMustang Coyote Alternator. Additionally, you have the option for both the \nModular Ford and Sanden SD7 7176 Air Compressor.  This combo delivers a \nvery oem finish with easy to get parts.\u003cbr\u003e\u003cbr\u003eThe PBH Speed Drive’s allow the builder the opportunity to configure the \naccessory drive many ways. Our system is designed to add add a power \nsteering pump, maintain an air compressor, relocate the alternator, and \nmore. Not only onto the coyote engine but put them in their stock \nlocations. For 1979-2010 Mustang owners looking to swap this means that \nstock AC and power steering lines can be reused or added for donor \nvehicles. Dont have a 79-10 Mustang? not to worry, we have super low \nprofile options that will allow use in the tightest of chassis and vintage \ncars\/trucks. Accessories like the Power Steering pump, alternator, and AC \nCompressor are not included but can be added to the Speed Drive’s.\u003cbr\u003e\u003cbr\u003ePick up a VMP or Roush Supercharger kit and our supercharged bracket kit to \nkeep the same power steering pump and ac compressor while adding the \npositive displacement supercharger. (kit only works with listed \nsuperchargers).\u003cbr\u003e\u003cbr\u003eAll brackets are machined out of billet aluminum and anodized with a black \nfinish.  All brackets were designed to keep the accessories tight to the \nblock. This in turn maximizes room in the engine bay.  Order yours today \nfor your engine swap.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142895710466,"sku":"PBH-1201","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/vmpfrontclean-700x394_1.png?v=1784991891"},{"product_id":"power-by-the-hour-speed-drive-for-roush-vmp-supercharged-5-0l-coyote-gm-type-ii-ps-sd7-ac-pbh-1232","title":"Power By The Hour Speed Drive for Roush\/VMP Supercharged 5.0L Coyote GM TYPE II PS SD7 AC - PBH-1232","description":"Power By The Hour Speed Drive for Roush\/VMP Supercharged 5.0L Coyote GM TYPE II PS SD7 AC - PBH-1232\u003cbr\u003e\u003cbr\u003eThe best way to make sure your coyote swap will be successful is to buy the \nright parts. We have been manufacturing coyote swap specific parts since \n2013 and our coyote swap acessory drive brackets, known as the PBH Speed \nDrive,  have been our most popular item. Designed to use factory modular \nFord Power Steering pumps from 1996-2010 Mustang GT along side the 2011-up \nMustang Coyote Alternator. Additionally, you have the option for both the \nModular Ford and Sanden SD7 7176 Air Compressor.  This combo delivers a \nvery oem finish with easy to get parts.\u003cbr\u003e\u003cbr\u003eThe PBH Speed Drive’s allow the builder the opportunity to configure the \naccessory drive many ways. Our system is designed to add add a power \nsteering pump, maintain an air compressor, relocate the alternator, and \nmore. Not only onto the coyote engine but put them in their stock \nlocations. For 1979-2010 Mustang owners looking to swap this means that \nstock AC and power steering lines can be reused or added for donor \nvehicles. Dont have a 79-10 Mustang? not to worry, we have super low \nprofile options that will allow use in the tightest of chassis and vintage \ncars\/trucks. Accessories like the Power Steering pump, alternator, and AC \nCompressor are not included but can be added to the Speed Drive’s.\u003cbr\u003e\u003cbr\u003ePick up a VMP or Roush Supercharger kit and our supercharged bracket kit to \nkeep the same power steering pump and ac compressor while adding the \npositive displacement supercharger. (kit only works with listed \nsuperchargers).\u003cbr\u003e\u003cbr\u003eAll brackets are machined out of billet aluminum and anodized with a black \nfinish.  All brackets were designed to keep the accessories tight to the \nblock. This in turn maximizes room in the engine bay.  Order yours today \nfor your engine swap.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142895743234,"sku":"PBH-1232","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/vmpfrontclean-700x394_11.png?v=1784991889"},{"product_id":"power-by-the-hour-speed-drive-for-roush-vmp-supercharged-5-0l-coyote-std-mod-ford-ps-ac-delete-pbh-1210","title":"Power By The Hour Speed Drive for Roush\/VMP Supercharged 5.0L Coyote STD MOD FORD PS AC DELETE - PBH-1210","description":"Power By The Hour Speed Drive for Roush\/VMP Supercharged 5.0L Coyote STD MOD FORD PS AC DELETE - PBH-1210\u003cbr\u003e\u003cbr\u003eThe best way to make sure your coyote swap will be successful is to buy the \nright parts. We have been manufacturing coyote swap specific parts since \n2013 and our coyote swap acessory drive brackets, known as the PBH Speed \nDrive,  have been our most popular item. Designed to use factory modular \nFord Power Steering pumps from 1996-2010 Mustang GT along side the 2011-up \nMustang Coyote Alternator. Additionally, you have the option for both the \nModular Ford and Sanden SD7 7176 Air Compressor.  This combo delivers a \nvery oem finish with easy to get parts.\u003cbr\u003e\u003cbr\u003eThe PBH Speed Drive’s allow the builder the opportunity to configure the \naccessory drive many ways. Our system is designed to add add a power \nsteering pump, maintain an air compressor, relocate the alternator, and \nmore. Not only onto the coyote engine but put them in their stock \nlocations. For 1979-2010 Mustang owners looking to swap this means that \nstock AC and power steering lines can be reused or added for donor \nvehicles. Dont have a 79-10 Mustang? not to worry, we have super low \nprofile options that will allow use in the tightest of chassis and vintage \ncars\/trucks. Accessories like the Power Steering pump, alternator, and AC \nCompressor are not included but can be added to the Speed Drive’s.\u003cbr\u003e\u003cbr\u003ePick up a VMP or Roush Supercharger kit and our supercharged bracket kit to \nkeep the same power steering pump and ac compressor while adding the \npositive displacement supercharger. (kit only works with listed \nsuperchargers).\u003cbr\u003e\u003cbr\u003eAll brackets are machined out of billet aluminum and anodized with a black \nfinish.  All brackets were designed to keep the accessories tight to the \nblock. This in turn maximizes room in the engine bay.  Order yours today \nfor your engine swap.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142895776002,"sku":"PBH-1210","price":759.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/vmpfrontclean-700x394_3.png?v=1784991891"},{"product_id":"power-by-the-hour-speed-drive-for-roush-vmp-supercharged-5-0l-coyote-std-mod-ford-ps-mod-sd7-ac-pbh-1212","title":"Power By The Hour Speed Drive for Roush\/VMP Supercharged 5.0L Coyote STD MOD FORD PS MOD SD7 AC - PBH-1212","description":"Power By The Hour Speed Drive for Roush\/VMP Supercharged 5.0L Coyote STD MOD FORD PS MOD SD7 AC - PBH-1212\u003cbr\u003e\u003cbr\u003eThe best way to make sure your coyote swap will be successful is to buy the \nright parts. We have been manufacturing coyote swap specific parts since \n2013 and our coyote swap acessory drive brackets, known as the PBH Speed \nDrive,  have been our most popular item. Designed to use factory modular \nFord Power Steering pumps from 1996-2010 Mustang GT along side the 2011-up \nMustang Coyote Alternator. Additionally, you have the option for both the \nModular Ford and Sanden SD7 7176 Air Compressor.  This combo delivers a \nvery oem finish with easy to get parts.\u003cbr\u003e\u003cbr\u003eThe PBH Speed Drive’s allow the builder the opportunity to configure the \naccessory drive many ways. Our system is designed to add add a power \nsteering pump, maintain an air compressor, relocate the alternator, and \nmore. Not only onto the coyote engine but put them in their stock \nlocations. For 1979-2010 Mustang owners looking to swap this means that \nstock AC and power steering lines can be reused or added for donor \nvehicles. Dont have a 79-10 Mustang? not to worry, we have super low \nprofile options that will allow use in the tightest of chassis and vintage \ncars\/trucks. Accessories like the Power Steering pump, alternator, and AC \nCompressor are not included but can be added to the Speed Drive’s.\u003cbr\u003e\u003cbr\u003ePick up a VMP or Roush Supercharger kit and our supercharged bracket kit to \nkeep the same power steering pump and ac compressor while adding the \npositive displacement supercharger. (kit only works with listed \nsuperchargers).\u003cbr\u003e\u003cbr\u003eAll brackets are machined out of billet aluminum and anodized with a black \nfinish.  All brackets were designed to keep the accessories tight to the \nblock. This in turn maximizes room in the engine bay.  Order yours today \nfor your engine swap.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142895808770,"sku":"PBH-1212","price":879.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/vmpfrontclean-700x394_5.png?v=1784991891"},{"product_id":"power-by-the-hour-speed-drive-for-roush-vmp-supercharged-5-0l-coyote-lp-mod-ford-ps-ac-delete-pbh-1220","title":"Power By The Hour SPEED DRIVE for Roush\/VMP Supercharged 5.0L Coyote LP MOD FORD PS AC DELETE - PBH-1220","description":"Power By The Hour SPEED DRIVE for Roush\/VMP Supercharged 5.0L Coyote LP MOD FORD PS AC DELETE - PBH-1220\u003cbr\u003e\u003cbr\u003eThe best way to make sure your coyote swap will be successful is to buy the \nright parts. We have been manufacturing coyote swap specific parts since \n2013 and our coyote swap acessory drive brackets, known as the PBH Speed \nDrive,  have been our most popular item. Designed to use factory modular \nFord Power Steering pumps from 1996-2010 Mustang GT along side the 2011-up \nMustang Coyote Alternator. Additionally, you have the option for both the \nModular Ford and Sanden SD7 7176 Air Compressor.  This combo delivers a \nvery oem finish with easy to get parts.\u003cbr\u003e\u003cbr\u003eThe PBH Speed Drive’s allow the builder the opportunity to configure the \naccessory drive many ways. Our system is designed to add add a power \nsteering pump, maintain an air compressor, relocate the alternator, and \nmore. Not only onto the coyote engine but put them in their stock \nlocations. For 1979-2010 Mustang owners looking to swap this means that \nstock AC and power steering lines can be reused or added for donor \nvehicles. Dont have a 79-10 Mustang? not to worry, we have super low \nprofile options that will allow use in the tightest of chassis and vintage \ncars\/trucks. Accessories like the Power Steering pump, alternator, and AC \nCompressor are not included but can be added to the Speed Drive’s.\u003cbr\u003e\u003cbr\u003ePick up a VMP or Roush Supercharger kit and our supercharged bracket kit to \nkeep the same power steering pump and ac compressor while adding the \npositive displacement supercharger. (kit only works with listed \nsuperchargers).\u003cbr\u003e\u003cbr\u003eAll brackets are machined out of billet aluminum and anodized with a black \nfinish.  All brackets were designed to keep the accessories tight to the \nblock. This in turn maximizes room in the engine bay.  Order yours today \nfor your engine swap.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142895841538,"sku":"PBH-1220","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/vmpfrontclean-700x394_6.png?v=1784991888"},{"product_id":"power-by-the-hour-edelbrock-2650-speed-drive-upfit-kit-pbh-105a","title":"Power By The Hour Edelbrock 2650 Speed Drive Upfit Kit - 6 Rib PBH-105A","description":"Power By The Hour Edelbrock 2650 Speed Drive Upfit Kit - PBH-105A\u003cbr\u003e\u003cbr\u003eIf you already have a PBH Speed Drive on your Naturally Aspirated Coyote, \nthis upfit kit is what you need to adapt it to work with the Edelbrock 2650 \nSupercharger. The upfit kit comes with the needed parts to turn your NA \nSpeed Drive into a Edelbrock 2650 Speed Drive.\u003cbr\u003e\u003cbr\u003eThe contents of the kit will vary based on which version of our NA Speed \nDrive you already have. We have had two versions of our Alternator bracket. \nOne was sold before 2\/20\/20 and had 6 holes in the bracket and the other \nwas an update that was sold after 2\/20\/20 which only had 5 holes in the \nbracket. Identify which one you have already to ensure you get every  piece \nyou need for your installation.\u003cbr\u003e\u003cbr\u003eWe also offer this in either 6 or 8 rib versions.\u003cbr\u003e\u003cbr\u003eInstallation of this kit will not disrupt or preposition the power steering \npump or ac compressor.\u003cbr\u003e\u003cbr\u003eContents of the kit:\u003cbr\u003e\u003cbr\u003e-alternator bracket(based on production date)\u003cbr\u003e\u003cbr\u003e-idler pulley bracket and hardware\u003cbr\u003e\u003cbr\u003e-idler pulleys\u003cbr\u003e\u003cbr\u003e-6 or 8 rib water pump pulley\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142895874306,"sku":"PBH-105A","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/edb-upfit-700x722.jpg?v=1784991887"},{"product_id":"power-by-the-hour-speed-drive-for-naturally-aspirated-5-0l-coyote-gm-type-ii-ps-mod-ford-ac-pbh-1131","title":"Power By The Hour Speed Drive For Naturally Aspirated 5.0L Coyote GM TYPE II PS MOD FORD AC - PBH-1131","description":"Power By The Hour Speed Drive For Naturally Aspirated 5.0L Coyote GM TYPE II PS MOD FORD AC - PBH-1131\u003cbr\u003e\u003cbr\u003eThe best way to make sure your coyote swap will be successful is to buy the \nright parts. We have been manufacturing coyote swap specific parts since \n2013 and our coyote swap acessory drive brackets, known as the PBH Speed \nDrive,  have been our most popular item. Designed to use factory modular \nFord Power Steering pumps from 1996-2010 Mustang GT along side the 2011-up \nMustang Coyote Alternator. Additionally, you have the option for both the \nModular Ford and Sanden SD7 7176 Air Compressor.  This combo delivers a \nvery oem finish with easy to get parts.\u003cbr\u003e\u003cbr\u003eThe PBH Speed Drive’s allow the builder the opportunity to configure the \naccessory drive many ways. Our system is designed to add add a power \nsteering pump, maintain an air compressor, relocate the alternator, and \nmore. Not only onto the coyote engine but put them in their stock \nlocations. For 1979-2010 Mustang owners looking to swap this means that \nstock AC and power steering lines can be reused or added for donor \nvehicles. Dont have a 79-10 Mustang? not to worry, we have super low \nprofile options that will allow use in the tightest of chassis and vintage \ncars\/trucks. Accessories like the Power Steering pump, alternator, and AC \nCompressor are not included but can be added to the Speed Drive’s.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142895939842,"sku":"PBH-1131","price":789.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/pbh-1122clean-700x394_9.png?v=1784991891"},{"product_id":"power-by-the-hour-speed-drive-for-roush-vmp-supercharged-5-0l-coyote-gm-type-ii-ps-ac-delete-pbh-1230","title":"Power By The Hour Speed Drive for Roush\/VMP Supercharged 5.0L Coyote GM TYPE II PS AC DELETE - PBH-1230","description":"Power By The Hour Speed Drive for Roush\/VMP Supercharged 5.0L Coyote GM TYPE II PS AC DELETE - PBH-1230\u003cbr\u003e\u003cbr\u003eThe best way to make sure your coyote swap will be successful is to buy the \nright parts. We have been manufacturing coyote swap specific parts since \n2013 and our coyote swap acessory drive brackets, known as the PBH Speed \nDrive,  have been our most popular item. Designed to use factory modular \nFord Power Steering pumps from 1996-2010 Mustang GT along side the 2011-up \nMustang Coyote Alternator. Additionally, you have the option for both the \nModular Ford and Sanden SD7 7176 Air Compressor.  This combo delivers a \nvery oem finish with easy to get parts.\u003cbr\u003e\u003cbr\u003eThe PBH Speed Drive’s allow the builder the opportunity to configure the \naccessory drive many ways. Our system is designed to add add a power \nsteering pump, maintain an air compressor, relocate the alternator, and \nmore. Not only onto the coyote engine but put them in their stock \nlocations. For 1979-2010 Mustang owners looking to swap this means that \nstock AC and power steering lines can be reused or added for donor \nvehicles. Dont have a 79-10 Mustang? not to worry, we have super low \nprofile options that will allow use in the tightest of chassis and vintage \ncars\/trucks. Accessories like the Power Steering pump, alternator, and AC \nCompressor are not included but can be added to the Speed Drive’s.\u003cbr\u003e\u003cbr\u003ePick up a VMP or Roush Supercharger kit and our supercharged bracket kit to \nkeep the same power steering pump and ac compressor while adding the \npositive displacement supercharger. (kit only works with listed \nsuperchargers).\u003cbr\u003e\u003cbr\u003eAll brackets are machined out of billet aluminum and anodized with a black \nfinish.  All brackets were designed to keep the accessories tight to the \nblock. This in turn maximizes room in the engine bay.  Order yours today \nfor your engine swap.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142895907074,"sku":"PBH-1230","price":779.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/vmpfrontclean-700x394_9.png?v=1784991889"},{"product_id":"power-by-the-hour-speed-drive-for-edelbrock-2650-std-mod-ford-ps-ac-delete-8rib-pbh-1410r8","title":"Power By The Hour SPEED DRIVE FOR Edelbrock 2650 STD MOD FORD PS AC DELETE 8RIB - PBH-1410R8","description":"Power By The Hour SPEED DRIVE FOR Edelbrock 2650 STD MOD FORD PS AC DELETE 8RIB - PBH-1410R8\u003cbr\u003e\u003cbr\u003eNow Available from PBH is the Speed Drive Coyote Power Steering solution \nfor 5.0L Coyote Swaps using the all new Edelbrock 2650 Supercharger. We \nhave applied the same belt drive for the Naturally Aspirated Coyotes to add \nthe Modular Ford Power Steering Pump to the Acessory Drive. We do this by \nrelocating the Alternator from its oem location and installing the Power \nSteering pump in that location. By doing this we are placing the PS pump in \nthe same location it is found on all Modular Ford Engines. This means easy \nfitment for all Fox Chassis cars and Modlar powered F-Series trucks. So you \ncan rest assure that if the chassis you are building can fit a Modular Ford \nEngine, then the Speed Drive will work for you.\u003cbr\u003e\u003cbr\u003eWe also provide the option to run either a Modular Ford AC Compressor or \nthe Sanden SD7 7176. With these two options you can make sure that the HVAC \nsystem you are running in your build will have a compatible Compressor in \nthe PBH Speed Drive.\u003cbr\u003e\u003cbr\u003eSpecific to the Edelbrock 2650 Speed Drive, PBH has released options for \nboth the 6 and 8 rib front drives. This means that if your looking to turn \nup the boost or upgrade to the Edelbrock 8 rib pulley setup, PBH has what \nyou need to continue use of the Power Steering pump.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142895972610,"sku":"PBH-1410R8","price":819.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/edb-eng-clean-wbelt-700x394_1.png?v=1784991890"},{"product_id":"power-by-the-hour-speed-drive-for-roush-vmp-supercharged-5-0l-coyote-gm-type-ii-ps-mod-ford-ac-pbh-1231","title":"Power By The Hour Speed Drive for Roush\/VMP Supercharged 5.0L Coyote GM TYPE II PS MOD FORD AC - PBH-1231","description":"Power By The Hour Speed Drive for Roush\/VMP Supercharged 5.0L Coyote GM TYPE II PS MOD FORD AC - PBH-1231\u003cbr\u003e\u003cbr\u003eThe best way to make sure your coyote swap will be successful is to buy the \nright parts. We have been manufacturing coyote swap specific parts since \n2013 and our coyote swap acessory drive brackets, known as the PBH Speed \nDrive,  have been our most popular item. Designed to use factory modular \nFord Power Steering pumps from 1996-2010 Mustang GT along side the 2011-up \nMustang Coyote Alternator. Additionally, you have the option for both the \nModular Ford and Sanden SD7 7176 Air Compressor.  This combo delivers a \nvery oem finish with easy to get parts.\u003cbr\u003e\u003cbr\u003eThe PBH Speed Drive’s allow the builder the opportunity to configure the \naccessory drive many ways. Our system is designed to add add a power \nsteering pump, maintain an air compressor, relocate the alternator, and \nmore. Not only onto the coyote engine but put them in their stock \nlocations. For 1979-2010 Mustang owners looking to swap this means that \nstock AC and power steering lines can be reused or added for donor \nvehicles. Dont have a 79-10 Mustang? not to worry, we have super low \nprofile options that will allow use in the tightest of chassis and vintage \ncars\/trucks. Accessories like the Power Steering pump, alternator, and AC \nCompressor are not included but can be added to the Speed Drive’s.\u003cbr\u003e\u003cbr\u003ePick up a VMP or Roush Supercharger kit and our supercharged bracket kit to \nkeep the same power steering pump and ac compressor while adding the \npositive displacement supercharger. (kit only works with listed \nsuperchargers).\u003cbr\u003e\u003cbr\u003eAll brackets are machined out of billet aluminum and anodized with a black \nfinish.  All brackets were designed to keep the accessories tight to the \nblock. This in turn maximizes room in the engine bay.  Order yours today \nfor your engine swap.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142896005378,"sku":"PBH-1231","price":869.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/vmpfrontclean-700x394_10.png?v=1784991891"},{"product_id":"power-by-the-hour-speed-drive-for-edelbrock-2650-std-mod-ford-ps-sd7-ac-8rib-pbh-1412r8","title":"Power By The Hour SPEED DRIVE FOR Edelbrock 2650 STD MOD FORD PS SD7 AC 8RIB - PBH-1412R8","description":"Power By The Hour SPEED DRIVE FOR Edelbrock 2650 STD MOD FORD PS SD7 AC 8RIB - PBH-1412R8\u003cbr\u003e\u003cbr\u003eNow Available from PBH is the Speed Drive Coyote Power Steering solution \nfor 5.0L Coyote Swaps using the all new Edelbrock 2650 Supercharger. We \nhave applied the same belt drive for the Naturally Aspirated Coyotes to add \nthe Modular Ford Power Steering Pump to the Acessory Drive. We do this by \nrelocating the Alternator from its oem location and installing the Power \nSteering pump in that location. By doing this we are placing the PS pump in \nthe same location it is found on all Modular Ford Engines. This means easy \nfitment for all Fox Chassis cars and Modlar powered F-Series trucks. So you \ncan rest assure that if the chassis you are building can fit a Modular Ford \nEngine, then the Speed Drive will work for you.\u003cbr\u003e\u003cbr\u003eWe also provide the option to run either a Modular Ford AC Compressor or \nthe Sanden SD7 7176. With these two options you can make sure that the HVAC \nsystem you are running in your build will have a compatible Compressor in \nthe PBH Speed Drive.\u003cbr\u003e\u003cbr\u003eSpecific to the Edelbrock 2650 Speed Drive, PBH has released options for \nboth the 6 and 8 rib front drives. This means that if your looking to turn \nup the boost or upgrade to the Edelbrock 8 rib pulley setup, PBH has what \nyou need to continue use of the Power Steering pump.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142896038146,"sku":"PBH-1412R8","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/edb-eng-clean-wbelt-700x394_5.png?v=1784991894"},{"product_id":"power-by-the-hour-speed-drive-for-edelbrock-2650-std-mod-ford-ps-mod-ford-ac-6rib-pbh-1411r6","title":"Power By The Hour SPEED DRIVE FOR Edelbrock 2650 STD MOD FORD PS MOD FORD AC 6RIB - PBH-1411R6","description":"Power By The Hour SPEED DRIVE FOR Edelbrock 2650 STD MOD FORD PS MOD FORD AC 6RIB - PBH-1411R6\u003cbr\u003e\u003cbr\u003eNow Available from PBH is the Speed Drive Coyote Power Steering solution \nfor 5.0L Coyote Swaps using the all new Edelbrock 2650 Supercharger. We \nhave applied the same belt drive for the Naturally Aspirated Coyotes to add \nthe Modular Ford Power Steering Pump to the Acessory Drive. We do this by \nrelocating the Alternator from its oem location and installing the Power \nSteering pump in that location. By doing this we are placing the PS pump in \nthe same location it is found on all Modular Ford Engines. This means easy \nfitment for all Fox Chassis cars and Modlar powered F-Series trucks. So you \ncan rest assure that if the chassis you are building can fit a Modular Ford \nEngine, then the Speed Drive will work for you.\u003cbr\u003e\u003cbr\u003eWe also provide the option to run either a Modular Ford AC Compressor or \nthe Sanden SD7 7176. With these two options you can make sure that the HVAC \nsystem you are running in your build will have a compatible Compressor in \nthe PBH Speed Drive.\u003cbr\u003e\u003cbr\u003eSpecific to the Edelbrock 2650 Speed Drive, PBH has released options for \nboth the 6 and 8 rib front drives. This means that if your looking to turn \nup the boost or upgrade to the Edelbrock 8 rib pulley setup, PBH has what \nyou need to continue use of the Power Steering pump.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142896070914,"sku":"PBH-1411R6","price":819.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/edb-eng-clean-wbelt-700x394_2.png?v=1784991893"},{"product_id":"power-by-the-hour-speed-drive-for-edelbrock-2650-std-mod-ford-ps-mod-ford-ac-8rib-pbh-1411r8","title":"Power By The Hour SPEED DRIVE FOR Edelbrock 2650 STD MOD FORD PS MOD FORD AC 8RIB - PBH-1411R8","description":"Power By The Hour SPEED DRIVE FOR Edelbrock 2650 STD MOD FORD PS MOD FORD AC 8RIB - PBH-1411R8\u003cbr\u003e\u003cbr\u003eNow Available from PBH is the Speed Drive Coyote Power Steering solution \nfor 5.0L Coyote Swaps using the all new Edelbrock 2650 Supercharger. We \nhave applied the same belt drive for the Naturally Aspirated Coyotes to add \nthe Modular Ford Power Steering Pump to the Acessory Drive. We do this by \nrelocating the Alternator from its oem location and installing the Power \nSteering pump in that location. By doing this we are placing the PS pump in \nthe same location it is found on all Modular Ford Engines. This means easy \nfitment for all Fox Chassis cars and Modlar powered F-Series trucks. So you \ncan rest assure that if the chassis you are building can fit a Modular Ford \nEngine, then the Speed Drive will work for you.\u003cbr\u003e\u003cbr\u003eWe also provide the option to run either a Modular Ford AC Compressor or \nthe Sanden SD7 7176. With these two options you can make sure that the HVAC \nsystem you are running in your build will have a compatible Compressor in \nthe PBH Speed Drive.\u003cbr\u003e\u003cbr\u003eSpecific to the Edelbrock 2650 Speed Drive, PBH has released options for \nboth the 6 and 8 rib front drives. This means that if your looking to turn \nup the boost or upgrade to the Edelbrock 8 rib pulley setup, PBH has what \nyou need to continue use of the Power Steering pump.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142896103682,"sku":"PBH-1411R8","price":859.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/edb-eng-clean-wbelt-700x394_3.png?v=1784991889"},{"product_id":"power-by-the-hour-speed-drive-for-edelbrock-2650-std-mod-ford-ps-ac-delete-6rib-pbh-1410r6","title":"Power By The Hour SPEED DRIVE FOR Edelbrock 2650 STD MOD FORD PS AC DELETE 6RIB - PBH-1410R6","description":"Power By The Hour SPEED DRIVE FOR Edelbrock 2650 STD MOD FORD PS AC DELETE 6RIB - PBH-1410R6\u003cbr\u003e\u003cbr\u003eNow Available from PBH is the Speed Drive Coyote Power Steering solution \nfor 5.0L Coyote Swaps using the all new Edelbrock 2650 Supercharger. We \nhave applied the same belt drive for the Naturally Aspirated Coyotes to add \nthe Modular Ford Power Steering Pump to the Acessory Drive. We do this by \nrelocating the Alternator from its oem location and installing the Power \nSteering pump in that location. By doing this we are placing the PS pump in \nthe same location it is found on all Modular Ford Engines. This means easy \nfitment for all Fox Chassis cars and Modlar powered F-Series trucks. So you \ncan rest assure that if the chassis you are building can fit a Modular Ford \nEngine, then the Speed Drive will work for you.\u003cbr\u003e\u003cbr\u003eWe also provide the option to run either a Modular Ford AC Compressor or \nthe Sanden SD7 7176. With these two options you can make sure that the HVAC \nsystem you are running in your build will have a compatible Compressor in \nthe PBH Speed Drive.\u003cbr\u003e\u003cbr\u003eSpecific to the Edelbrock 2650 Speed Drive, PBH has released options for \nboth the 6 and 8 rib front drives. This means that if your looking to turn \nup the boost or upgrade to the Edelbrock 8 rib pulley setup, PBH has what \nyou need to continue use of the Power Steering pump.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142896136450,"sku":"PBH-1410R6","price":779.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/edb-eng-clean-wbelt-700x394.png?v=1784991891"},{"product_id":"power-by-the-hour-speed-drive-for-edelbrock-2650-lp-mod-ford-ps-ac-delete-6-rib-pbh-1420r6","title":"Power By The Hour SPEED DRIVE FOR Edelbrock 2650 LP MOD FORD PS AC DELETE 6 RIB - PBH-1420R6","description":"Power By The Hour SPEED DRIVE FOR Edelbrock 2650 LP MOD FORD PS AC DELETE 6 RIB - PBH-1420R6\u003cbr\u003e\u003cbr\u003eNow Available from PBH is the Speed Drive Coyote Power Steering solution \nfor 5.0L Coyote Swaps using the all new Edelbrock 2650 Supercharger. We \nhave applied the same belt drive for the Naturally Aspirated Coyotes to add \nthe Modular Ford Power Steering Pump to the Acessory Drive. We do this by \nrelocating the Alternator from its oem location and installing the Power \nSteering pump in that location. By doing this we are placing the PS pump in \nthe same location it is found on all Modular Ford Engines. This means easy \nfitment for all Fox Chassis cars and Modlar powered F-Series trucks. So you \ncan rest assure that if the chassis you are building can fit a Modular Ford \nEngine, then the Speed Drive will work for you.\u003cbr\u003e\u003cbr\u003eWe also provide the option to run either a Modular Ford AC Compressor or \nthe Sanden SD7 7176. With these two options you can make sure that the HVAC \nsystem you are running in your build will have a compatible Compressor in \nthe PBH Speed Drive.\u003cbr\u003e\u003cbr\u003eSpecific to the Edelbrock 2650 Speed Drive, PBH has released options for \nboth the 6 and 8 rib front drives. This means that if your looking to turn \nup the boost or upgrade to the Edelbrock 8 rib pulley setup, PBH has what \nyou need to continue use of the Power Steering pump.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142896169218,"sku":"PBH-1420R6","price":809.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/edb-eng-clean-wbelt-700x394_6.png?v=1784991892"},{"product_id":"power-by-the-hour-speed-drive-for-edelbrock-2650-lp-mod-ford-ps-mod-ford-ac-6rib-pbh-1421r6","title":"Power By The Hour SPEED DRIVE FOR Edelbrock 2650 LP MOD FORD PS MOD FORD AC 6RIB - PBH-1421R6","description":"Power By The Hour SPEED DRIVE FOR Edelbrock 2650 LP MOD FORD PS MOD FORD AC 6RIB - PBH-1421R6\u003cbr\u003e\u003cbr\u003eNow Available from PBH is the Speed Drive Coyote Power Steering solution \nfor 5.0L Coyote Swaps using the all new Edelbrock 2650 Supercharger. We \nhave applied the same belt drive for the Naturally Aspirated Coyotes to add \nthe Modular Ford Power Steering Pump to the Acessory Drive. We do this by \nrelocating the Alternator from its oem location and installing the Power \nSteering pump in that location. By doing this we are placing the PS pump in \nthe same location it is found on all Modular Ford Engines. This means easy \nfitment for all Fox Chassis cars and Modlar powered F-Series trucks. So you \ncan rest assure that if the chassis you are building can fit a Modular Ford \nEngine, then the Speed Drive will work for you.\u003cbr\u003e\u003cbr\u003eWe also provide the option to run either a Modular Ford AC Compressor or \nthe Sanden SD7 7176. With these two options you can make sure that the HVAC \nsystem you are running in your build will have a compatible Compressor in \nthe PBH Speed Drive.\u003cbr\u003e\u003cbr\u003eSpecific to the Edelbrock 2650 Speed Drive, PBH has released options for \nboth the 6 and 8 rib front drives. This means that if your looking to turn \nup the boost or upgrade to the Edelbrock 8 rib pulley setup, PBH has what \nyou need to continue use of the Power Steering pump.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142896201986,"sku":"PBH-1421R6","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/edb-eng-clean-wbelt-700x394_7.png?v=1784991894"},{"product_id":"power-by-the-hour-speed-drive-for-whipple-gen-5-coyote-std-mod-ford-ps-ac-delete-pbh-1510r6","title":"Power By The Hour SPEED DRIVE FOR WHIPPLE GEN 5 COYOTE STD MOD FORD PS AC DELETE - PBH-1510R6","description":"Power By The Hour SPEED DRIVE FOR WHIPPLE GEN 5 COYOTE STD MOD FORD PS AC DELETE - PBH-1510R6\u003cbr\u003e\u003cbr\u003eNow Available from PBH is the Speed Drive Coyote Power Steering solution \nfor 5.0L Coyote Swaps using the Gen 5 Whipple Supercharger. We have applied \nthe same belt drive for the Naturally Aspirated Coyotes to add the Modular \nFord Power Steering Pump to the Accessory Drive. We do this by relocating \nthe Alternator from its oem location and installing the Power Steering pump \nin that location. By doing this we are placing the PS pump in the same \nlocation it is found on all Modular Ford Engines. This means easy fitment \nfor all Fox Chassis cars and Modular powered F-Series trucks. So you can \nrest assure that if the chassis you are building can fit a Modular Ford \nEngine, then the Speed Drive will work for you.\u003cbr\u003e\u003cbr\u003eWe also provide the option to run either a Modular Ford AC Compressor or \nthe Sanden SD7 7176. With these two options you can make sure that the HVAC \nsystem you are running in your build will have a compatible Compressor in \nthe PBH Speed Drive.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142896234754,"sku":"PBH-1510R6","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/whipplegen5-front-clean-700x394.jpg?v=1784991894"},{"product_id":"power-by-the-hour-speed-drive-for-edelbrock-2650-gm-type-ii-ps-mod-ford-ac-6rib-pbh-1431r6","title":"Power By The Hour SPEED DRIVE FOR Edelbrock 2650 GM TYPE II PS MOD FORD AC 6RIB - PBH-1431R6","description":"Power By The Hour SPEED DRIVE FOR Edelbrock 2650 GM TYPE II PS MOD FORD AC 6RIB - PBH-1431R6\u003cbr\u003e\u003cbr\u003eNow Available from PBH is the Speed Drive Coyote Power Steering solution \nfor 5.0L Coyote Swaps using the all new Edelbrock 2650 Supercharger. We \nhave applied the same belt drive for the Naturally Aspirated Coyotes to add \nthe Modular Ford Power Steering Pump to the Acessory Drive. We do this by \nrelocating the Alternator from its oem location and installing the Power \nSteering pump in that location. By doing this we are placing the PS pump in \nthe same location it is found on all Modular Ford Engines. This means easy \nfitment for all Fox Chassis cars and Modlar powered F-Series trucks. So you \ncan rest assure that if the chassis you are building can fit a Modular Ford \nEngine, then the Speed Drive will work for you.\u003cbr\u003e\u003cbr\u003eWe also provide the option to run either a Modular Ford AC Compressor or \nthe Sanden SD7 7176. With these two options you can make sure that the HVAC \nsystem you are running in your build will have a compatible Compressor in \nthe PBH Speed Drive.\u003cbr\u003e\u003cbr\u003eSpecific to the Edelbrock 2650 Speed Drive, PBH has released options for \nboth the 6 and 8 rib front drives. This means that if your looking to turn \nup the boost or upgrade to the Edelbrock 8 rib pulley setup, PBH has what \nyou need to continue use of the Power Steering pump.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142896267522,"sku":"PBH-1431R6","price":839.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/edb-eng-clean-wbelt-700x394_12.png?v=1784991890"},{"product_id":"power-by-the-hour-speed-drive-for-edelbrock-2650-lp-mod-ford-ps-sd7-ac-6rib-pbh-1422r6","title":"Power By The Hour SPEED DRIVE FOR Edelbrock 2650 LP MOD FORD PS SD7 AC 6RIB - PBH-1422R6","description":"Power By The Hour SPEED DRIVE FOR Edelbrock 2650 LP MOD FORD PS SD7 AC 6RIB - PBH-1422R6\u003cbr\u003e\u003cbr\u003eNow Available from PBH is the Speed Drive Coyote Power Steering solution \nfor 5.0L Coyote Swaps using the all new Edelbrock 2650 Supercharger. We \nhave applied the same belt drive for the Naturally Aspirated Coyotes to add \nthe Modular Ford Power Steering Pump to the Acessory Drive. We do this by \nrelocating the Alternator from its oem location and installing the Power \nSteering pump in that location. By doing this we are placing the PS pump in \nthe same location it is found on all Modular Ford Engines. This means easy \nfitment for all Fox Chassis cars and Modlar powered F-Series trucks. So you \ncan rest assure that if the chassis you are building can fit a Modular Ford \nEngine, then the Speed Drive will work for you.\u003cbr\u003e\u003cbr\u003eWe also provide the option to run either a Modular Ford AC Compressor or \nthe Sanden SD7 7176. With these two options you can make sure that the HVAC \nsystem you are running in your build will have a compatible Compressor in \nthe PBH Speed Drive.\u003cbr\u003e\u003cbr\u003eSpecific to the Edelbrock 2650 Speed Drive, PBH has released options for \nboth the 6 and 8 rib front drives. This means that if your looking to turn \nup the boost or upgrade to the Edelbrock 8 rib pulley setup, PBH has what \nyou need to continue use of the Power Steering pump.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142896300290,"sku":"PBH-1422R6","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/edb-eng-clean-wbelt-700x394_9.png?v=1784991889"},{"product_id":"power-by-the-hour-speed-drive-for-whipple-gen-5-coyote-std-mod-ford-ps-mod-ford-ac-pbh-1511r6","title":"Power By The Hour SPEED DRIVE FOR WHIPPLE GEN 5 COYOTE STD MOD FORD PS MOD FORD AC - PBH-1511R6","description":"Power By The Hour SPEED DRIVE FOR WHIPPLE GEN 5 COYOTE STD MOD FORD PS MOD FORD AC - PBH-1511R6\u003cbr\u003e\u003cbr\u003eNow Available from PBH is the Speed Drive Coyote Power Steering solution \nfor 5.0L Coyote Swaps using the Gen 5 Whipple Supercharger. We have applied \nthe same belt drive for the Naturally Aspirated Coyotes to add the Modular \nFord Power Steering Pump to the Accessory Drive. We do this by relocating \nthe Alternator from its oem location and installing the Power Steering pump \nin that location. By doing this we are placing the PS pump in the same \nlocation it is found on all Modular Ford Engines. This means easy fitment \nfor all Fox Chassis cars and Modular powered F-Series trucks. So you can \nrest assure that if the chassis you are building can fit a Modular Ford \nEngine, then the Speed Drive will work for you.\u003cbr\u003e\u003cbr\u003eWe also provide the option to run either a Modular Ford AC Compressor or \nthe Sanden SD7 7176. With these two options you can make sure that the HVAC \nsystem you are running in your build will have a compatible Compressor in \nthe PBH Speed Drive.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142896333058,"sku":"PBH-1511R6","price":949.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/whipplegen5-front-clean-700x394_1.jpg?v=1784991897"},{"product_id":"power-by-the-hour-speed-drive-for-edelbrock-2650-lp-mod-ford-ps-sd7-ac-8rib-pbh-1422r8","title":"Power By The Hour SPEED DRIVE FOR Edelbrock 2650 LP MOD FORD PS SD7 AC 8RIB - PBH-1422R8","description":"Power By The Hour SPEED DRIVE FOR Edelbrock 2650 LP MOD FORD PS SD7 AC 8RIB - PBH-1422R8\u003cbr\u003e\u003cbr\u003eNow Available from PBH is the Speed Drive Coyote Power Steering solution \nfor 5.0L Coyote Swaps using the all new Edelbrock 2650 Supercharger. We \nhave applied the same belt drive for the Naturally Aspirated Coyotes to add \nthe Modular Ford Power Steering Pump to the Acessory Drive. We do this by \nrelocating the Alternator from its oem location and installing the Power \nSteering pump in that location. By doing this we are placing the PS pump in \nthe same location it is found on all Modular Ford Engines. This means easy \nfitment for all Fox Chassis cars and Modlar powered F-Series trucks. So you \ncan rest assure that if the chassis you are building can fit a Modular Ford \nEngine, then the Speed Drive will work for you.\u003cbr\u003e\u003cbr\u003eWe also provide the option to run either a Modular Ford AC Compressor or \nthe Sanden SD7 7176. With these two options you can make sure that the HVAC \nsystem you are running in your build will have a compatible Compressor in \nthe PBH Speed Drive.\u003cbr\u003e\u003cbr\u003eSpecific to the Edelbrock 2650 Speed Drive, PBH has released options for \nboth the 6 and 8 rib front drives. This means that if your looking to turn \nup the boost or upgrade to the Edelbrock 8 rib pulley setup, PBH has what \nyou need to continue use of the Power Steering pump.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142896365826,"sku":"PBH-1422R8","price":929.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/edb-eng-clean-wbelt-700x394_10.png?v=1784991896"},{"product_id":"power-by-the-hour-speed-drive-for-whipple-gen-5-coyote-lp-mod-ford-ps-ac-delete-pbh-1520r6","title":"Power By The Hour SPEED DRIVE FOR WHIPPLE GEN 5 COYOTE LP MOD FORD PS AC DELETE - PBH-1520R6","description":"Power By The Hour SPEED DRIVE FOR WHIPPLE GEN 5 COYOTE LP MOD FORD PS AC DELETE - PBH-1520R6\u003cbr\u003e\u003cbr\u003eNow Available from PBH is the Speed Drive Coyote Power Steering solution \nfor 5.0L Coyote Swaps using the Gen 5 Whipple Supercharger. We have applied \nthe same belt drive for the Naturally Aspirated Coyotes to add the Modular \nFord Power Steering Pump to the Accessory Drive. We do this by relocating \nthe Alternator from its oem location and installing the Power Steering pump \nin that location. By doing this we are placing the PS pump in the same \nlocation it is found on all Modular Ford Engines. This means easy fitment \nfor all Fox Chassis cars and Modular powered F-Series trucks. So you can \nrest assure that if the chassis you are building can fit a Modular Ford \nEngine, then the Speed Drive will work for you.\u003cbr\u003e\u003cbr\u003eWe also provide the option to run either a Modular Ford AC Compressor or \nthe Sanden SD7 7176. With these two options you can make sure that the HVAC \nsystem you are running in your build will have a compatible Compressor in \nthe PBH Speed Drive.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142896398594,"sku":"PBH-1520R6","price":919.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/whipplegen5-front-clean-700x394_3.jpg?v=1784991896"},{"product_id":"power-by-the-hour-speed-drive-for-edelbrock-2650-std-mod-ford-ps-sd7-ac-6rib-pbh-1412r6","title":"Power By The Hour SPEED DRIVE FOR Edelbrock 2650 STD MOD FORD PS SD7 AC 6RIB - PBH-1412R6","description":"Power By The Hour SPEED DRIVE FOR Edelbrock 2650 STD MOD FORD PS SD7 AC 6RIB - PBH-1412R6\u003cbr\u003e\u003cbr\u003eNow Available from PBH is the Speed Drive Coyote Power Steering solution \nfor 5.0L Coyote Swaps using the all new Edelbrock 2650 Supercharger. We \nhave applied the same belt drive for the Naturally Aspirated Coyotes to add \nthe Modular Ford Power Steering Pump to the Acessory Drive. We do this by \nrelocating the Alternator from its oem location and installing the Power \nSteering pump in that location. By doing this we are placing the PS pump in \nthe same location it is found on all Modular Ford Engines. This means easy \nfitment for all Fox Chassis cars and Modlar powered F-Series trucks. So you \ncan rest assure that if the chassis you are building can fit a Modular Ford \nEngine, then the Speed Drive will work for you.\u003cbr\u003e\u003cbr\u003eWe also provide the option to run either a Modular Ford AC Compressor or \nthe Sanden SD7 7176. With these two options you can make sure that the HVAC \nsystem you are running in your build will have a compatible Compressor in \nthe PBH Speed Drive.\u003cbr\u003e\u003cbr\u003eSpecific to the Edelbrock 2650 Speed Drive, PBH has released options for \nboth the 6 and 8 rib front drives. This means that if your looking to turn \nup the boost or upgrade to the Edelbrock 8 rib pulley setup, PBH has what \nyou need to continue use of the Power Steering pump.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142896431362,"sku":"PBH-1412R6","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/edb-eng-clean-wbelt-700x394_4.png?v=1784991894"},{"product_id":"power-by-the-hour-speed-drive-for-edelbrock-2650-gm-type-ii-ps-ac-delete-6rib-pbh-1430r6","title":"Power By The Hour SPEED DRIVE FOR Edelbrock 2650 GM TYPE II PS AC DELETE 6RIB - PBH-1430R6","description":"Power By The Hour SPEED DRIVE FOR Edelbrock 2650 GM TYPE II PS AC DELETE 6RIB - PBH-1430R6\u003cbr\u003e\u003cbr\u003eNow Available from PBH is the Speed Drive Coyote Power Steering solution \nfor 5.0L Coyote Swaps using the all new Edelbrock 2650 Supercharger. We \nhave applied the same belt drive for the Naturally Aspirated Coyotes to add \nthe Modular Ford Power Steering Pump to the Acessory Drive. We do this by \nrelocating the Alternator from its oem location and installing the Power \nSteering pump in that location. By doing this we are placing the PS pump in \nthe same location it is found on all Modular Ford Engines. This means easy \nfitment for all Fox Chassis cars and Modlar powered F-Series trucks. So you \ncan rest assure that if the chassis you are building can fit a Modular Ford \nEngine, then the Speed Drive will work for you.\u003cbr\u003e\u003cbr\u003eWe also provide the option to run either a Modular Ford AC Compressor or \nthe Sanden SD7 7176. With these two options you can make sure that the HVAC \nsystem you are running in your build will have a compatible Compressor in \nthe PBH Speed Drive.\u003cbr\u003e\u003cbr\u003eSpecific to the Edelbrock 2650 Speed Drive, PBH has released options for \nboth the 6 and 8 rib front drives. This means that if your looking to turn \nup the boost or upgrade to the Edelbrock 8 rib pulley setup, PBH has what \nyou need to continue use of the Power Steering pump.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142896464130,"sku":"PBH-1430R6","price":789.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/edb-eng-clean-wbelt-700x394_11.png?v=1784991893"},{"product_id":"power-by-the-hour-speed-drive-for-whipple-gen-5-coyote-gm-type-ii-ps-mod-ford-ac-pbh-1531r6","title":"Power By The Hour SPEED DRIVE FOR WHIPPLE GEN 5 COYOTE GM TYPE II PS MOD FORD AC - PBH-1531R6","description":"Power By The Hour SPEED DRIVE FOR WHIPPLE GEN 5 COYOTE GM TYPE II PS MOD FORD AC - PBH-1531R6\u003cbr\u003e\u003cbr\u003eNow Available from PBH is the Speed Drive Coyote Power Steering solution \nfor 5.0L Coyote Swaps using the Gen 5 Whipple Supercharger. We have applied \nthe same belt drive for the Naturally Aspirated Coyotes to add the Modular \nFord Power Steering Pump to the Accessory Drive. We do this by relocating \nthe Alternator from its oem location and installing the Power Steering pump \nin that location. By doing this we are placing the PS pump in the same \nlocation it is found on all Modular Ford Engines. This means easy fitment \nfor all Fox Chassis cars and Modular powered F-Series trucks. So you can \nrest assure that if the chassis you are building can fit a Modular Ford \nEngine, then the Speed Drive will work for you.\u003cbr\u003e\u003cbr\u003eWe also provide the option to run either a Modular Ford AC Compressor or \nthe Sanden SD7 7176. With these two options you can make sure that the HVAC \nsystem you are running in your build will have a compatible Compressor in \nthe PBH Speed Drive.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142896496898,"sku":"PBH-1531R6","price":949.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/whipplegen5-front-clean-700x394_7.jpg?v=1784991897"},{"product_id":"power-by-the-hour-speed-drive-for-edelbrock-2650-lp-mod-ford-ps-mod-ford-ac-8rib-pbh-1421r8","title":"Power By The Hour SPEED DRIVE FOR Edelbrock 2650 LP MOD FORD PS MOD FORD AC 8RIB - PBH-1421R8","description":"Power By The Hour SPEED DRIVE FOR Edelbrock 2650 LP MOD FORD PS MOD FORD AC 8RIB - PBH-1421R8\u003cbr\u003e\u003cbr\u003eNow Available from PBH is the Speed Drive Coyote Power Steering solution \nfor 5.0L Coyote Swaps using the all new Edelbrock 2650 Supercharger. We \nhave applied the same belt drive for the Naturally Aspirated Coyotes to add \nthe Modular Ford Power Steering Pump to the Acessory Drive. We do this by \nrelocating the Alternator from its oem location and installing the Power \nSteering pump in that location. By doing this we are placing the PS pump in \nthe same location it is found on all Modular Ford Engines. This means easy \nfitment for all Fox Chassis cars and Modlar powered F-Series trucks. So you \ncan rest assure that if the chassis you are building can fit a Modular Ford \nEngine, then the Speed Drive will work for you.\u003cbr\u003e\u003cbr\u003eWe also provide the option to run either a Modular Ford AC Compressor or \nthe Sanden SD7 7176. With these two options you can make sure that the HVAC \nsystem you are running in your build will have a compatible Compressor in \nthe PBH Speed Drive.\u003cbr\u003e\u003cbr\u003eSpecific to the Edelbrock 2650 Speed Drive, PBH has released options for \nboth the 6 and 8 rib front drives. This means that if your looking to turn \nup the boost or upgrade to the Edelbrock 8 rib pulley setup, PBH has what \nyou need to continue use of the Power Steering pump.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLethal Performance is proud to offer the entire line of  products!\u003cbr\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142896529666,"sku":"PBH-1421R8","price":879.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/edb-eng-clean-wbelt-700x394_8.png?v=1784991891"},{"product_id":"power-by-the-hour-speed-drive-for-whipple-gen-5-6-coyote-gm-type-ii-ps-sd7-ac-pbh-1532r6","title":"Power By The Hour SPEED DRIVE FOR WHIPPLE GEN 5 \/ 6 COYOTE GM TYPE II PS SD7 AC - PBH-1532R6","description":"\u003cp\u003ePower By The Hour SPEED DRIVE FOR WHIPPLE GEN 5 \/ 6 COYOTE GM TYPE II PS SD7 AC - PBH-1532R6\u003cbr\u003e\n\u003cbr\u003e\nNow Available from PBH is the Speed Drive Coyote Power Steering solution for 5.0L Coyote Swaps using the Gen 5 Whipple Supercharger. We have applied the same belt drive for the Naturally Aspirated Coyotes to add the Modular Ford Power Steering Pump to the Accessory Drive. We do this by relocating the Alternator from its oem location and installing the Power Steering pump in that location. By doing this we are placing the PS pump in the same location it is found on all Modular Ford Engines. This means easy fitment for all Fox Chassis cars and Modular powered F-Series trucks. So you can rest assure that if the chassis you are building can fit a Modular Ford Engine, then the Speed Drive will work for you.\u003cbr\u003e\n\u003cbr\u003e\nWe also provide the option to run either a Modular Ford AC Compressor or the Sanden SD7 7176. With these two options you can make sure that the HVAC system you are running in your build will have a compatible Compressor in the PBH Speed Drive.\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLethal Performance is proud to offer the entire line of products!\u003cbr\u003e\u003c\/p\u003e","brand":"Power By The Hour","offers":[{"title":"Default Title","offer_id":48142896562434,"sku":"PBH-1532R6","price":989.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/whipplegen5-front-clean-700x394_8.jpg?v=1784991896"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/collections\/dsc_4252-2_1.jpg?v=1785195501","url":"https:\/\/www.lethalperformance.com\/collections\/coyote-swap-parts.oembed","provider":"Lethal Performance","version":"1.0","type":"link"}