⚠ WARNING : Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
BMR Fabrication
SKU : BMR-RS002R
BMR 05-2014 Mustang Tubular Radiator Support and Swaybar Delete (Red)

If you are drag racing your new Mustang and don't need a front sway bar, our crossmember can save an additional 11 lbs. off the front end. The factory radiator crossmember is built overly strong because it must also support the additional loads of the front sway bar. With the swaybar removed, the crossmember only needs to support the weight of the radiator. Our lightweight crossmember only weighs 5.5 lbs. as compared the OE 16.5 lbs. Combined with sway bar removal, expect a 26.5 Lb. weight reduction! Easy 30-45 minute install. Allows the use of the factory bumper cover support plastic.


$89.95
Description

Details

If you are drag racing your new Mustang and don't need a front sway bar, our crossmember can save an additional 11 lbs. off the front end. The factory radiator crossmember is built overly strong because it must also support the additional loads of the front sway bar. With the swaybar removed, the crossmember only needs to support the weight of the radiator. Our lightweight crossmember only weighs 5.5 lbs. as compared the OE 16.5 lbs. Combined with sway bar removal, expect a 26.5 Lb. weight reduction! 

Easy 30-45 minute install. Allows the use of the factory bumper cover support plastic.

Vehicle Application(s)

This product fits the following models and years

ModelYear(s)
Reviews

Be the first to review this product

Write Your Own Review