⚠ WARNING : Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
BMR Fabrication
BMR 05-2010 Mustang K-Member & Non-Adjustable A-Arm Front End Package (Black Hammertone)

BMR Fabrication 2010 GT500 K-Member and Non-Adjustable A-Arm Front End Package

Kit Includes Tubular K-member(KM010) and Non-Adjustable A-arms(AA010)

K-Member Information

Ford did a great job designing the '05 Mustang. Everything comes apart so easily, it almost seems like it was designed by racers. To some, a tubular K-member may seem like a complicated and difficult installation, however in the '05 Mustang it can be done in 2 hours with hand tools!

Our tubular K-member uses an integrated mount system, saving up to 5 lbs. over the competitions' designs. The OE K-member with motor mounts weighs 44 lbs. while our integrated design weighs only 24 lbs., a 20 lb. weight reduction. Designed to be used with factory A-arms and spindles. Fits V6 and V8 models.

A-Arm Information

BMR tubular A-arms are a lightweight alternative to your factory stamped steel arms. We offer them in two styles, standard and adjustable. Both models feature CNC machined rear pivot points, heavy duty 1.25" DOM tubing, and new ball joints sourced from Fords OE supplier. Unlike our competitors, these A-arms are also compatible with your OE K-member.

While both models are considered "streetable", our standard version is what we recommend as it will produce the least amount of road noise. This version is assembled with high durometer internally fluted polyurethane bushings with grease fittings at both mounts. 11.2 lbs. lighter than stock.

The adjustable version is recommended for drag race or road race applications due to the elevated noise transmission from spherical rod ends and Delrin bushings. Assembled with a large 3/4" QA1 XR series Teflon lined rod end on the main tube and an internally greased Delrin bushing on the rear, this version allows camber and caster adjustment not possible with OE arms. Adjustable version provides enough adjustment for up to 1.125" overall narrower track width(9/16" per side). 9.6 lbs. lighter than stock.



Drops up to 34 lbs. off the nose of your car and creates additional clearance for long tube headers and aftermarket turbo kits.

FEP001 Package Includes:

  • (1) KM010 K-member, standard motor mounts, standard rack mounts 
  • (1) AA010 A-arms, Lower, Non-adjustable, Poly/Delrin Bushings, 18mm Standard Height Ball Joint

Vehicle Application(s)

This product fits the following models and years

SVT Shelby GT5002007 2008 2009 2010
Mustang GT2005 2006 2007 2008 2009 2010
Mustang V62005 2006 2007 2008 2009

Be the first to review this product

Write Your Own Review