Details
Anderson Composites Carbon fiber rear diffuser for 2005-2013 Chevrolet Corvette C6 (2005-2013 CORVETTE C6) - AC-RD05CHC6-OE
- Anderson Composites VIP carbon fiber parts are manufactured by spraying a coat of resin on the mold, sheets of carbon fiber fabric are laid out across the mold and then a final coat of resin is applied on the fabric before being placed inside a vacuum sealed bag to cure (provides an excellent fabric-to-resin ratio). Once cured, the part is removed from the mold, trimmed and a final coat of gel coat applied and polished to protect the surface and increase the high luster finish. No additional clear coat is required.
- Mounting tabs may require modifications for correct fitment; minor adjustments may be necessary as part of the normal installation process
- Rear bumper needs to be removed for proper installation
- Mounts with OE hardware
Hood PinsGas StrutsHeat ShieldProp 65 - WARNING: California Proposition 65: This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer, and Bisphenol A which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Shipping - Anderson Composites packs all products carefully to prevent damage during shipping. However, damage may still occur occasionally. Please inspect the packaging and the products carefully upon receiving them, then accept the shipment and notate any damages and irregularities, such as crushed, torn, punctured, or broken parts on both the packaging and the product, on the freight bill or receipt in the driver’s presence. Buyer must retain all cartons, packing materials, and damaged products for the carrier’s damage inspector to inspect. Do not refuse shipment or return it without approval, because the buyer’s right to make a damage claim may be denied. A signed receipt without any notation indemnifies the carrier as well as Anderson Composites from any further damage claims. Discovery of damages after a clear delivery becomes the responsibility of the customer.
All damages must be notified to carrier and the dealer within 24 hours. In cases of damage with proper notation on receipt, the carrier will determine whether to pay for repair cost or replacement value of the damaged goods after damage inspection. Replacement value is the amount the buyer paid to the distributor and is not negotiable. All disputes about the settlement amount should be addressed with the carrier. Anderson Composites, under no circumstances, shall be liable for the damaged product or for subsequent settlement of the claim with the carrier.
Lethal Performance is proud to offer the entire line of Anderson Composites products!
