Live Help
Powered by Lethalperformance
Choose Your Car
Search
Lethal Girls
Lethal Features
Featured Manufacturers

Lethal Performance 79lb High Impedence Injectors


*Product images may differ from actual product appearance.
Manufactured by: Lethal Performance
Model: LP-79LBHIGHIMP
Retail Price: $1035.93
Your Price: $739.95
Ask a Question about this product
  Add to Cart:

SSL we accept visa, mastercard, discover and american express
Lethal Performance 79lb High Impedence Injectors (Set of 8)

This new injector uses the same technology as the Delphi Disc injectors. This injector exhibits excellent street manners given its size.

All tests run with n-Heptane (0.6855g/mL) @ 20oC (+/-1oC), 3.0 Bar (+/-0.01 Bar) (43.5PSI) , 14VDC (+/-0.05VDC), saturated driver (70V zener cutoff). Engineering data specifies a flow ratio of apx. 1.035:1 when converting to gas.

Specfications:
Static Flow Rate: 76.65 lb/hr = 9.67 g/s = 846 cc/min (+/-4%)
Dynamic Flow @ 2.5ms PW @ 100Hz: 16.88 mg/pulse +/-10% @ 2.5ms PW @ 100Hz
Coil Resistance: 12.2 Ohms (+/-0.35 Ohms) (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Spray pattern: 3-Prong Cone
Body: Top-Feed EV1 Style Body
Factory fitted with Viton upper and lower o-rings
Grease supplied to lubricate o-rings prior to installation.
Click here for Injector dimensions

Dynamically flowed and grouped within 1%.

Note: Injector flow rates are based on testing with n-Heptane test solvent (0.6855 g/ml). U.S. EPA emission test gasoline 40CFR86.113 (0.735g/ml) flows in most common injector designs at about a 3 to 4% higher rate than n-Heptane. A ratio of 1.035:1 can be used when converting the flow specifications above.

TYPICAL APPLICATIONS: High-performance

ADDITIONAL INFORMATION:
Top feed disc injectors use a small disc with six holes around its circumference. The disc rests on a short chimney that surrounds a metering hole. As the disc is raised off the chimney by magnetic force, fuel flows through the holes in the disc, over the walls of the chimney, and out the metering hole to form a full, finely atomized cone.

Performance advantages over pintle injectors (i.e. Ford / Bosch & Accel types) as listed by Delphi:
• The flat mating surface ensures that no excess fuel is present to evaporate and therefore, no deposits or clogging can occur.
• Compatible with alternative fuels (i.e. E85, Methanol)
• Longer service life
• High-speed disc action allows wider dynamic flow range for improved idling
• Quieter operation
• Revolutionary disc design resists build up deposits which can affect fuel flow.
• No Fuel leakage for quicker starts
 
Tell a Friend
Related Products:
11-060-8
11-065-8
11-075-8
HARNESS
SD-60LBINJECTORCOMBO
SD-83LBHIGHIMP
SD-63LBUSCAR
LP-Bosch72
Don't forget to check out Lethal Diesel for all your diesel needs.
Check out our Ford Powerstroke Diesel Blog