MAC 86-93 5.0L 3" Offroad Prochamber (Fits Stock Manifolds)


Manufacturer: MAC

Be the first to review this product

Availability: In stock


MAC 86-93 5.0L 3" Offroad Prochamber (Fits Stock Manifolds)

*image is only a representation and may not be accurate

Ford Mustang 1979-1993 5.0L V8, 3" Aluminized Steel Pro Chamber to MAC Short Tube Headers or Stock Manifolds, Designed for 5 Speed or AutomaticTransmissions

Special Order Item!

Allow 4-6 Weeks for Shippment.  

This MAC Pro Chamber will start off at 2½" Aluminized Steel  and then flare out to 3". This makes the MAC 3" Pro Chamber be able to bolt up to your 2½" Collector on the MAC Short Tube Headers, Stock Manifolds and most other after market short tube headers.

The MAC Patented Pro Chamber™ has made the current intermediate systems obsolete all together. Split (one each side) manifold or exhaust headers on any engine, need to be balanced to each other. On a V8 motor for example, the exhaust pulses enter respective collectors at uneven intervals of 0-90-180-270 degrees of engine rotation. This process hampers the full benefits of any exhaust header system or manifold by the long intervals between exhaust pulses. Balancing of exhaust gases in mandatory for optimum power. Balance tubes between exhaust, on opposite side, helps transfer exhaust pulses for side to side to smooth out the exhaust pulses and flow. This results in more Power and a broader Torque band.

The MAC Pro Chamber goes even futher than the Traditional X & H-Pipes to produce More Torque and Horse Power by merging the Exhaust Pulses into one area. Merging of all Exhaust Gases creates Higher Temperatures which creates a Boost in Exhaust Velocity and allows the Exhaust Gases to see and use both Outlets.

Your Exhaust will think it's a 180° Fully Tuned Header!


*****The MAC PC4393 is for Off-Road Use Only!*****

Manufacturer MAC

Write Your Own Review

Only registered users can write reviews. Please, log in or register

  • Mustang 5.0L 1986,1987,1988,1989,1990,1991,1992,1993