Lethal Performance S197 Mustang Adjustable Motor Mounts (0-3/4" Drop)
- - Adjustable (From Stock height to a 3/4" drop)
- - Allows More Clearance for Aftermarket Superchargers
- - Made in the USA
- - Aircraft Grade 7075 and 2040 Aluminum
- - Custom Poured Polyurethane
- - Easy to Install
- - Complete with Hardware
The Lethal Performance motor mount was designed with one thing in mind. Adjust-ability. The reason we chose that as a platform for our motor mounts is because we found that the standard size motor mount doesn't work for everyone. As an example a GT500 customer that wants to run a larger twin screw supercharger under the stock hood needs more clearance than the stock height motor mounts offer. A mount with a 1/2-3/4" drop will however aid in allowing the customer to fit that blower or strut tower brace under the stock hood. That's why we decided to offer our engine mounts with an additional CNC machined spacers. The spacers allows the customer to decide which size mount they prefer to run. You can run the mount so that the engine sits at the stock height or use the additional spacers and hardware we supply which allows the mount to be lowered by up to 3/4". These are a direct replacement for your stock mounts and bolt right in.
Depending on what type and size longtube headers you're running lowering the engine by 1/2-3/4" may cause interference issues with the header primary and the steering shaft. This has been seen on the GT500's that have a 5.4L motor running large header primaries. However we haven't confirmed that this is an issue on the 4.6L or 5.0L engine.
When using these mounts with the 1/2-3/4" drop setting it will allow those running the KB 2.8L supercharger to clear the stock hood without having to notch it.
When using these mounts with the 1/2-3/4" drop setting and a 3.4L Whipple additional K-Member spacers are required in order for the 3.4L/4.0L to clear the stock hood.