Lethal Performance 99-01 Cobra 850rwhp Return Style Fuel System

Lethal Performance 99-01 Cobra 850rwhp Return Style Fuel System

Rated up 850rwhp with the Walbro GSS342 Pumps.



You wanted it so here it is.. The apex of all return style fuel systems for the 1999-2001 Cobra.. Available through Lethal Performance and ready to rock right out of the box..



We've incorporated the DivisonX Dual Return Style Fuel Hat with the finest fuel lines, fuel rails, connectors and more to make this kit stand out above the rest..



Included In this Kit:

• DivisionX Dual Pump Return Style Billet Fuel Hat


• DivisionX High Flow Fuel Rails


• Aeromotive Pro-Series EFI Fuel Pressure Regulator


• (2) Walbro GSS342 Pumps


• 8an Fragola Series 8000 Push-Lite Race Hose


• Aeromotive 10 Micron Fuel Filter


• Custom Dual Pump Return Style Wiring Harness w/Relays


• All Necessary Fittings, Hose Clams and Accessories


• Detailed Installation Instructions

**NOW FITS (2) NEW WALBRO 400LPH DCSS TWIN TURBINE PUMPS which are capable of supporting 1200+rwhp**

All new at Lethal Performance is the DivisionX line of fuel system components.

-10an Feed

-8an Return Port



The SN95 dual pump return style fuel hat can house (2) Walbro 400lph DCSS pumps, (2) GSS342 pumps the Aeromotive 340 Stealth Pumps or the DivisionX Stryker 340lph pumps. It has a return port built into it so there's no modification necessary to your stock tank. This assembly is a direct replacement for your stock fuel pump setup and bolts right in. It's got a single -8an feed and a -6an return port. All of the DivisionX hats are hard anodized in black for extra protection are are fully compatible with regular gasoline as well as E85.

-O-Ring Style Fittings for Feed and Return (No More Teflon Paste Needed)

-NEW BIG Bore feed and return path for optimal flow.

-Oversize pump retainer for (2) Walbro 400lph DCSS pumps, (2) GSS342 pumps the Aeromotive 340 Stealth Pumps or the DivisionX Stryker 340lph pumps, snap on electrical connectors for pumps

-Direct replacement for your stock fuel pump assembly. Bolts right in using an OEM gasket for a perfect seal as well as it uses the OEM 03-04 cobra fuel sending unit in the same stock location.

-Eliminates the PPRV and offers a direct in-tank hose routing to both fuel pumps for optimum fuel delivery.

-Two pairs of gas blocked 12 gauge conductors using 12ga Mil Spec fuel resistant wires for fuel pump wiring to the FPDM(s). This allows your (2) Walbro 400lph DCSS pumps, (2) GSS342 pumps the Aeromotive 340 Stealth Pumps or the DivisionX Stryker 340lph pumps to operate without losses from undersized OEM wires and will help in dropping duty cycle. Wiring for the ground and fuel level sender also included.

-No welding or caulk used in assembly or manufacturing. Full billet components use o-rings, OEM seals, and gas blocked through conductors.

-Hard Anodized in a deep black finish for extra protection

-Viton O-Rings/Compatible with E85

-Uses 30R10 submersible fuel hose which won't crack or deteriorate

-Hardware and installation instructions included



The DivisionX fuel hat manifold includes:

• CNC Machined from high quality billet aluminum


• All Gas Blocked wiring for the Pumps, Ground and Level Sender including the proper spade connectors to connect the wires to each fuel pump


• Oversize pump retainer for (2) Walbro 400lph DCSS pumps, (2) GSS342 pumps the Aeromotive 340 Stealth Pumps or the DivisionX Stryker 340lph pumps, and AN -8 fitting for return port


• Pre-cut and installed Gates 30R10 Submersible Fuel Hose for each pump


• All XRP an Fittings


• New Bolts for mounting the assembly to the fuel tank

NOTE: Uses the factory 2003-2004 Cobra level sender or you can use any 99-04 GT, 03-04 Mach-1 or 99-01 Cobra level sender with the purchase of the SN95 level sender adapter bracket.