BMR 2011-2014 Mustang Non Adjustable UCA with Urethane Bushing (Red)


Manufacturer: BMR Fabrication

Be the first to review this product

Availability: In stock


BMR 2011-2014 Mustang Non Adjustable UCA with Urethane Bushing (Red)

*image is only a representation and may not be accurate

The single upper control arm is responsible for maintaining pinion angle and preventing axle counter-rotation. This "3 link" style suspension is ideal for autocross and road race applications as it allows the most articulation possible with a solid axle. For drag racing, however, the single, centered link becomes a weak point as the arm is only one inch thick in the middle and made from light gauge, stamped steel. Our upper control arm is made from 1 5/8" x .120 wall DOM tube and is MIG welded. BMR uses internally fluted high-durometer polyurethane bushings. Pumping grease into the external grease fitting forces the grease between the bushings, through the internal flutes and outward to the thrust surfaces of the bushing. This insures that all surfaces of the bushing are properly lubed by simply pumping grease into one fitting. 

NOTE: *BMR strongly recommends upgrading the stock Upper Control Arm Mount when utilizing an aftermarket Upper Arm on S197 Mustangs. Clunking noise may become present without an upgraded Upper Control Arm Mount. The correct part # for this application is UCM002.

Manufacturer BMR Fabrication

Write Your Own Review

Only registered users can write reviews. Please, log in or register