BMR 05-09 GT K-Member & Adjustable A-Arm Front End Package

BMR 05-09 GT K-Member & Adjustable A-Arm Front End Package

Includes Tubular K-member(KM010) and adjustable A-arms(AA019)



K-Member Information

Ford did a great job designing the '05 Mustang. Everything comes apart so easily, it almost seems like it was designed by racers. To some, a tubular K-member may seem like a complicated and difficult installation, however in the '05+ Mustang it can be done in 2 hours with hand tools!



Our tubular K-member uses an integrated mount system, saving up to 5 lbs. over the competitions' designs. The OE K-member with motor mounts weighs 44 lbs. while our integrated design weighs only 24 lbs., a 20 lb. weight reduction. Designed to be used with factory A-arms and spindles. Fits V6 and V8 models.



A-Arm Information

BMR tubular A-arms are a lightweight alternative to your factory stamped steel arms. We offer them in two styles, standard and adjustable. Both models feature CNC machined rear pivot points, heavy duty 1.25" DOM tubing, and new ball joints sourced from Fords OE supplier. Unlike our competitors, these A-arms are also compatible with your OE K-member.



While both models are considered "streetable", our standard version is what we recommend as it will produce the least amount of road noise. This version is assembled with high durometer internally fluted polyurethane bushings with grease fittings at both mounts. 11.2 lbs. lighter than stock.



The adjustable version is recommended for drag race or road race applications due to the elevated noise transmission from spherical rod ends and Delrin bushings. Assembled with a large 3/4" QA1 XR series Teflon lined rod end on the main tube and an internally greased Delrin bushing on the rear, this version allows camber and caster adjustment not possible with OE arms. Adjustable version provides enough adjustment for up to 1.125" overall narrower track width(9/16" per side). 9.6 lbs. lighter than stock.