Hellion Power Systems 2001 Bullitt Single Turbo System


Hellion Power Systems 2001 Bullitt Single Turbo System



*image is only a representation and may not be the actual product

Manufactured by:   Hellion
Model:   HPS-2001BULLITTSINGLE
Starting at:   $5,995.00
 
:
:
:
:
:
:
:
:
:
:
:
Add to Cart:   
Tell a Friend
Write Review
Hellion Power Systems 2001 Bullitt Single Turbo System

Bullitt Owners, we've got your special-edition steed's performance taken care of, with our Hellion Power Systems turbo kit for the 2001 Mustang Bullitt. Your rare ride won't have to be sacrificed to the gods of speed either, as this kit requires no cutting of the body, and retains all accessories and options. Our 100% 16 gauge stainless steel construction, and lifetime warranty on the piping is coupled with Turbonetics' 1 year unconditional warranty on the turbo to provide secure operation and power production. Upgrades are available and a complete list of parts, as well as the system

Standard System Includes:
-Turbonetics Turbocharger (1 year warranty)
-16 gauge Stainless Steel hot and cold parts
-High flow air to air intercooler
-High flow Turbonetics wastegate
-Silicone hose kit
-Stainless T-bolt clamp kit
-By pass valve
-Oil feed and drain lines
-All other necessary hardware to install kit


System Options:

Larger turbocharger- IF YOU SELECT A LARGER TURBO WITH THIS SYSTEM YOU WILL ALSO HAVE TO DELETE THE FUEL INJECTORS, FUEL PUMP AND MASS AIR METER.
(Kit abecomes a "tuner kit" at that point)

T-66 Turbonetics Turbocharger +$595
T-76 TurboneticsTurbocharger +$595
Ball Bearing +$400
Turbo Heat shield +$75
Bassani High Flow High Performance Catalytic Converter +$125
TurboXs billet blowoff option with bigger turbo +$150

Maximum Motorsports K-Member Upgrade
MM Hellion K-member
MM Front control arms
MM Front coil over conversion kit w/hypercoil springs
MM Aluminum steering rack bushings
MM Caster camber plates
MM Ajustable tie rod ends +$995

K-Member Delete Options
This Kit includes the, caster camber plates, a-arms and coil over with the K-Member. If Package is deleted, none of the merchandise in K-member kit will be received.

(Customer understands that 99-04 systems were designed around the UPR tubular K-member , therefore, using any other manufacturer may complicate installation of the Hellion Turbo System and change the intended design.)

Delete K-member kit (K-member, A-arms, Coilovers, and Caster/Camber plates) -$695
Delete Caster Camber Plates Only -$85
Delete Coilovers Only -$150

Fuel System Deletes
Delete fuel injectors -$249
Delete fuel pump -$100
Delete mass air meter -$100

COMPLETE PARTS LIST
1 (1) Turbonetics 62mm Turbo
2 (1) Turbonetics Evolution wastegate
3 (1) bar and plate intercooler 24x6x3
4 (1) 39lb injectors w/ adaptors (set of 8)
5 (1) fuel pump
6 (1) mass air meter
7 (1) mass air meter adapter flange, hardware
8 (1) k-member, a-arms and coil over kit
9 (1) Mitsubishi bypass valve
10(1) main turbo inlet pipe
11(1) crossover pipe
12 (1) downpipe
13 (1) exhaust double barrel
14 (1) cat or straight pipe
15 (1) y-pipe
16 (1) small wastegate pipe
17 (1) intercooler pipe 1
18 (1) intercooler pipe 2
19 (1) intercooler pipe 3
20 (1) boost inlet pipe/polished
21 (1) radiator hose 1 5/8 polished
22 (1) turbo 4" inlet pipe/polished
23 (1) turbo support bracket
24 (1) intercooler support bracket
25 (1) coolant can support rod and nut
26 (2) ps line splices 3/8"
27 (1) ps line hose 10"each/28 ft
28 (4) ps line high pressure clamps 3/8"
29 (1) oil feed line 47" #4
30 (2) 1/8 pipe to #4 90 degree fitting
31 (2) 2 inch hose clamps for radiator hose
32 (4) 3/4 inch hose clamps/idle hoses
33 (1) breather hose 5/8" x 20 "
34 (4) 5/8 breather hose clamps
35 (4) 4 to 4.5 inch hose clamps
36 (4) bypass hose clamps
37 (2) metric stainless bolts for wastegate
38 (2) 5/16 stainless bolts for wastegate 1" long
39 (1) metric bolt for turbo support bracket/38mm long
40 (1)metric bolt for turbo support bracket/35mm long
41 (2) metric bolts from intercooler to radiator support
42 (4) washers for metric bolts
43 (1)1/4 x 3/4 bolt ps line cooler bracket
44 (2) 1/ 4x 3/4 bolt for elec box relocation
45 (3) 1/4 inch nylock nuts
46 (6) 1/4 inch washers
47 (1) Adel clamp for a/c line 5/16" hole
48 (1) 5/16 x1/2 bolt to secure Adel clamp to boost hose
49 (1) 5/16 inch washer
50 (2) Metric bolts for oil drain to turbo
51 (2) washers for oil drain
52 (4) 3/8 x 1 1/2 bolts, nuts, and washers for turbo to turbine inlet
53 (2) 3/8 x 1 3/4 bolts and washers for crossover connection
54 (3) 3 inch torque clamps for exhaust
55 (1) rubber dog bone 1.75" center to center
56 (1) hanger for exhaust
57 (4) 3/8 x 2.5 bolts, nuts, and washers for y-pipe to mufflers
58 (2) turbo bracket spacers aluminum
59 (3) 5/16 x 3/4 bolts, nuts, and washers for intercooler support bracket, exhaust hanger
60 (1) #10 straight hose fitting
61 (1) #10 90 degree hose fitting
62 (1) #10 line, steel braided, 1 foot
63 (1) 3/8 to #10 oil return fitting
64 (10) 2.5" stainless T-bolt clamps
65 (2) 3 inch stainless T-bolt clamps
66 (1) 3 inch v-band clamp for turbo outlet
67 (8) NGK Spark plugs
68 (1) 4"/3.5" long silicone hose piece
69 (1) 4"/2" long silicone hose pieces
70 (5) 2.5 inch silicone hose pieces 3" long
71 (1) 3 inch silicone hose piece 3" long
72 (2) 1 3/8" x 2.5 silicone hose pieces
73 (1) 3 ft 7/32 vacuum line for bypass
74 (1) brass tee
75 (1) Turbo oil outlet flange
76 (1) #10 Turbo oil outlet extension fitting
77 (1) Turbocharger heat shield
78 (1) 1 5/8 inch clamp for wastegate tube
79 (1) punch for oil pan
80 (1) K and N air filter
81 (1) heat wrap roll
82 (2) stainless fan heat shields 6x3
83 (2) stainless heat shields for steering boots 4x5
84 (8) metal zip ties
85 (10) zip ties for ps hose retention