Ford Racing 80lb USCAR High Impedence Injectors (Set of 8)

NOTE: Vehicles built before late 2003 may require the use of a harness adapters to convert their older style wiring harness to accept this newer USCAR style injector. Vehicles such as the 03-04 Mach-1, 03-04 Cobra, 05-09 GT and GT500 do not require any harness adapters to run this injector.

Introducing the new 80 lb/hr high impedance fuel injector from Siemen Deka! Standard equipment on the 2008 Cobra Jet turn-key drag race car, this injector is perfect for highly modified 03/04 Cobra owners and GT500 owners alike. Our testing has shown that on a GT500 with stock fuel pumps, these injectors barely go above 80% duty cycle while supporting 700 rwhp at 40 psid fuel pressure.

Coming soon will be fuel rail spacers (M8510M2L) which will allow these injectors to be installed painlessly in a GT500. These spacers are also standard equipment on the 2008 Cobra Jet and are necessary because of the longer length of the LU80 injector relative to the stock GT500 piece.

The EV6 80lbs/hr @39.15.psi or 84lbs/hr @ 43.5 EFI fuel injectors function at 11-12 Ohms, These new injectors offer users the increased benefit of an optimal fuel spray pattern once placed following installation inside the vehicle engine. These injectors work exceptionally well with any of the new Ford Mustang engine types, along with many other engine types capable of utilizing MORE POWER!

-No jumper harness performance when operating your EFI vehicle.
-Optimal fuel spray pattern allows engines to utilize MORE POWER!!!
-Allows for naturally aspirated engines to operate at power increases up to 1200 hp! NA (8)
-SIEMENS new injectors offer a high impedance rate of 11-12 Ohms.
-These new Siemens EV6 fuel injectors are compatible with any Ev6 wire harness

Product Specifications
80lbs/hr @39.15.psi or 84lbs/hr @ 43.5 11.0 Ohms EV6 Package
Dimensions: 4.00H x 6.25W x 4.25D
Weight: 1.00#

Instruction Sheet: N/A
Warranty Available: No