Zone 5 Performance MDM Mega Driver Module

Product 2/2

Previous
Return to the Product List
Next

Zone 5 Performance MDM Mega Driver Module



*image is only a representation and may not be the actual product

Manufactured by:   Zone 5 Performance
Model:   Z5-MDMMODULE
Starting at:   $589.00
 
Add to Cart:   
Tell a Friend
Write Review
Zone 5 Performance MDM Mega Driver Module

All new at Lethal Performance is the Zone 5 Performance MDM Mega Driver Module. The MDM is the cutting edge of returnless style fuel system components. As the need for more power surrounds us we need to back it up with the fuel system to handle it. The fuel system is the backbone of your car so making sure it's safe and efficient is most important. As we reach the limits of the stock system more pumps are added. When 2 pumps aren't enough a third pump is introduced. The issue with a third pump is that it needs a driver to manage it. This is where the MDM comes into play. Not only does the MDM have the capability of running the 3rd pump it also can handle a single or dual pump setup more efficient then the stock fuel pressure driver module.

During testing of the MDM module we saw some incredible results. Our 3.4L Whippled GT500 was making 726rwhp on the stock fuel system and showed a low 90% pump duty cycle. After adding the MDM, Fore Precision Triple Pump Hat, Upgraded Lines and Filter while still using the stock rails we saw a major drop in pump duty cycles. Testing on the street under full load duty cycles dropped to a peak of 72.5%. Talk about efficiency!!! The MDM is easy to install and comes with everything needed for installation as well as detailed installation instructions.

MDM FEATURES:
- DRIVES UP TO *THREE* FORD GT PUMPS TO MAXIMUM FUEL CAPACITY
- DESIGNED TO INTERFACE PERFECTLY WITH THE FORE PRECISION TRIPLE PUMP FUEL HAT!
- CAN SUPPLY IN EXCESS OF 35A OF CURRENT WITH LESS THAN 0.5V TOTAL INTERNAL VOLTAGE DROP (as a comparison, the stock FPDM will drop approximately 2.0V at ~ 20A of forward current)
- OPERATES AT TWICE THE OUTPUT FREQUENCY OF THE STOCK FPDM FOR SMOOTHER PUMP CURRENT CONTROL RESULTING IN POTENTIALLY LONGER PUMP LIFE AND BETTER FUEL PRESSURE REGULATION
- BUILT-IN WIRING UPGRADE AND HIGH CURRENT RELAY
- 8AWG INPUT WIRING FOR BATTERY CONNECTION
- 14AWG OUTPUT WIRING FOR EACH PUMP
- BEAUTIFULLY CNC MACHINED HOUSING/HEATSINK BY YOUR BILLET EXPERTS "FORE PRECISION WORKS"