Sieman Deka 63lb USCAR High Imp Injectors

Product 5/6

Previous
Return to the Product List
Next

Sieman Deka 63lb USCAR High Imp Injectors



*image is only a representation and may not be the actual product

Manufactured by:   Sieman Deka
Model:   SD-63LBUSCAR
Starting at:   $399.95
 
Add to Cart:   
Tell a Friend
Write Review
Sieman Deka 63lb USCAR High Imp Injectors

**These Injectors do not need harness adapters when used on most 2003+ Mustangs**

This newly released injector from Siemens is the same as the older style 63lb injector except that it has the new USCAR electrical connector. This USCAR connector (sometimes referred to as 'EV6 oval') is found on many late-model G.M. (LS2), Dodge (Hemi), Ford (Modular) and select import motors. This eliminates the need for in-line adapters or having to change the factory connectors.

All tests run with n-Heptane (0.6855g/mL) @ 20oC (+/-1oC), 3.0 Bar (+/-0.01 Bar), 14VDC (+/-0.05VDC), saturated driver wtih RC cutoff. Gas (0.735g/mL) ratings converted at a 1.035:1 ratio.

Static Flow Rate (GAS): 62.7 lb/hr = 646 cc/min = 474 g/min
Dynamic Flow Rate 2.5ms PW @ 100Hz (GAS): 20.2mg/pulse
Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Gain: 0.11ms/mg
Offset: 0.055ms
Turn on time @ 14VDC: 1.14ms
Turn off time: 0.85ms @ 600KPa
Factory Tollerance: +/-6 % Spray Pattern: Cone (4-Hole)
Connector: USCAR (Bosch EV6/LS2)
Factory fitted with Viton upper and lower o-rings.
Grease supplied to lubricate o-rings prior to installation.